Edit copy in a CS6 file, but lock formatting of parts of the file

I have a client that needs to be able to edit some copy in a file that I've created in adobe Illustrator CS6, but I want to be able to lock the formatting of parts of the file. I don't want them to use CS6.Suggestions?

Can't do. At best you could offer them a hacky solution liek creating a PDF form with an editable text field, but it may end up looking awful.
Mylenium

Similar Messages

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

savannahp
What version of Premiere Elements and on what computer operating system?
Please review the following that I excerpted from an older post here regarding Adobe's PRE_help comments about Hollywood Effect and mention of
Red Noir. Does any of the following apply to any of what is happening to you.
- Whenever I try to add an effect from the Hollywood Looks menu, it brings up a warning that all my previous effects on that clip will be deleted. However it will let me add those same effects *after* applying Hollywood Looks.
This is because of how the Hollywood Looks are designed to be used. Since these are effect presets (multiple effects in combination) that result in a specific "look"; they are best applied in isolation. If any previous effect is applied and we still allow a Hollywood effect to be applied, we will not be able to see what the effect does clearly. For e.g. if you already have a Gaussian Blur effect applied to your clip, and then we allow you to apply the "Red Noir" Hollywood effect, the fact that the "Reds" in the scenes will be highlighted and the others converted to B/W will not be clearly seen since the content is already blurred out. So any previously applied effects was designed to be removed. This holds good even if you apply a Hollywood look "on top of" another one. The previous one will be replaced. Having said that, you can customize the look further by either tweaking an already applied filter or by adding a newer effect on top. That is the reason you can apply an effect on top of the Hollywood Effects and not vice versa.
Please review and consider and then we can proceed from there if necessary.
ATR

Can I open and edit a Premiere Pro CS6 file with Premiere Pro CC 2014?

Can I bring a CS6 file to CC 2014 in Premiere? I know I can't move backwards, but can I move forward without any problems? Thank you!!

Hello Amanda and yairb999,
if you've identified what you think is a bug, submit a report through the form at
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform. (Feature Request/Bug Report Form >>> I quote: Welcome to the Feature Request and Bug Report Submission Form. Use this form to request new features or suggest modifications to existing features.). These reports submitted through that form go directly to the product team. Sometimes they get back in touch with you to verify the bug or try to find a solution to your problem.
Hans-Günter

I am trying to edit a home movie on iMovies but when I try to download the movie from a dvd a message comes up saying there are no importable files. The DVD is the last in a series of 5 and the others have downloaded without any difficulty.Help?

I am trying to edit a home movie on iMovies on a mac book air. The movie is on a dvd but when I try to import the movie onto iMovies I get a message saying there are no importable files. I've downloaded the macx converter software but I can't seem to download the movie into that either.

Chris , thanks for the prompt reply. The dvd was produced by a third party that I found on line . I had a number of old mini digital video cassettes from a Sony Handycam. I can play the DVD's on my laptop but I can't edit them on iMovies to delete a lot of the rubbish on them. I have five DVD's and three downloaded without any problem but the last two are according to iMovies non importable.

I edit my photos on my mbp but when i sync to ipad the cropping remains but touch up repairs are gone?

When I edit my photos in iphoto on MBP then sync them to ipad the cropping stays but the touch up & repair things don't show?

Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for the iPod Photo Cache.
Trash it. Start iPhoto and try sync again.
Regards
TD

I am trying to use video that has sound throughout it. I want the sound to remain in it's current time locations but want to replace parts of the video with pics

I am tring to make a movie on IMovie that has continous film footage with sound. I want to retain the flow and current time location of the sound...but replace portions of the streaming video with still pictures without losing the current placement of the sound track portion of the current film. Please help. Thanks Philfrompendleton

use the keyword 'cut away' in iMovie's built-in Help for detailed advice ...

I have copied over my music file to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit Preferences has the right location

I have copied over my music files to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit>Preferences has the right location?

Select one of the tracks with a broken link, press ctrl-i to Get Info. Say No when iTunes asks if you would like to locate the track, then look at the Summary tab for the location expects to find the file in.
Now try to locate the file in question. The two locations should give a clue as to what to do next.
Here is an example with a file I've deliberately moved from the new layout to the old pre-iTunes 9 layout.
This means iTunes is expecting to find the file at:
D:\iTunes\iTunes Media\Music\a-ha\Take On Me\01 Take On Me.mp3
but it isn't there because I've moved it to:
D:\iTunes\iTunes Media\a-ha\Take On Me\01 Take On Me.mp3
which is where it would have lived back in iTunes 8 (though the media folder would have been called iTunes Music back then as well).
If you can provide the expected and actual locations of a broken track I should be able to suggest the easiest way to resolve things.
tt2

How can I get hold of a copy of Illustrator CS6. I have a CC subscription as well as CS5.5 but I have a contact in the US who keeps sending me CS6 files.

.

rbuhunwal is correct; working on CS6 files in CC is no problem, and saving them back as CS6 is only one or two extra mouse clicks, and takes no more time than saving as CC. We do this every day with client files which are everything from CS6, all the way down to CS3.
The only caveat with older versions is if you use filters, etc., not available in that earlier version, it will impact editability on the other end. Not much of a worry from CC to CS6, though.
--OB

I installed Photoshop CC (2014) yesterday through the Creative Cloud app. Now, when in Lightroom when I go to "edit in"and select Photoshop CC (2014) and click on "edit copy with Lightroom adjustments", it opens Photoshop CC (2014) but my photo doesn't s

I installed Photoshop CC (2014) yesterday through the Creative Cloud app. Now, when in Lightroom when I go to "edit in"and select Photoshop CC (2014) and click on "edit copy with Lightroom adjustments", it opens Photoshop CC (2014) but my photo doesn't show up? My photo does show up when I click on "edit copy" or "edit original".
How can I correct that so that I can open up a photo from Lightroom WITH the Lightroom adjustments? Thanks!

I'm having a similar problem, but only with jpg's. I have PS CS6, CC, and CC 2014. Other image file formats function normally with regard to the "open with" list. PS CC 2014 appears on the list. But with jpg's only PS CC appears on the "open with" list and 2014 can't be added by the browsing for it.
The curious thing is that if I have any of the three versions of Photoshop open, click on Photoshop CC in the "open with" list, the image opens in whatever version is already open on my computer. This is true of all image formats. No matter which version I pick from the "open with" list it opens in the currently running program. I use only the latest version so keeping it open all the time is an easy work around. I won't uninstall any of the earlier versions lest more file association quirks result. it would be nice to have this matter fixed.

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

LR4 Problem: The file could not be edited because Adobe Photoshop CS6 could not be launched.

Is there a fix for this? When I try to edit an image in Photoshop from Lightroom 4 (CTRL+E), Photoshop CS6 launches immediately but with no image. In Lightroom 4, after about two minutes, the message box appears saying "The file could not be edited because Adobe Photoshop CS6 could not be launched." When I click OK, the image promptly opens in Photoshop CS6 like normal. This wan an itermittent issue for me after the LR4.1 release. I was hoping that LR4.2 would help, but now I get the error every time.
System
Lightroom 4.2 x64
Photoshop CS6 v13.0.1 x64
Bridge 5.0.1.23 x64
Windows 7 Pro x64
AMD Six Core / 3.9 Ghz
16 GB Memory
NVidia Quadro 1 Gb Video
Scratch space on three drives

This may be a cooincidence, I starting having problems after I started using a Nikon D800, which has 36MP files. LR4 released at the same time as the D800. LR4 shows signs of struggling with the larger files, which are typically 280MB TIFFs for the D800, like freezing for several seconds when using an adjustment brush or going into a spasm with the crop tool. Because Photoshop does not have similar large file issues, I'm doing more basic work in Photoshop, like cropping, dodge and burn, exposure adjustment, etc.
Because Photoshop otherwise runs fine, and appears to read all the prefernes properly mid-issue, to get a better idea of what's going on, I turned on Process Monitor from Technet. For what it's worth, LR4 appears to touch the Photoshop preferences before it launches Photoshop. LR4 must have a memory leak in that corrupts the Photoshop preferences file in a way that makes no difference to Photoshop.
My weekend project is to try Capture One to see if I can spend more time on photography and less troubleshooting Adobe problems. As it stands, LR4 is not usable for me.

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files?

I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files? What can be done so that I can either open and see the layers or how can the sender save it in a way that it doesn't "merge" the layers in some way to just one?

Could try saving as tiff provided layers and transparency are chosen at the time of saving. But it's hard to give a definitive answer as it depends on the final usage. For example PSD's tend to work better in applications like In Design in comparison with tiff.

Is there a way to lock the location of where iTunes is looking for music regardless of the itl file. I am loading a remote itl file by default ever time but then it's looking for the music on a local drive instead of a network drive.

So I have a number of PC's in the house that are dumping music into a central PC with a network shared drive.
The music is dumped into the "automatically added to library" folder on the remote PC. Itunes is always running in the background.
When I open iTunes on my local PC a script retrieves the newest ITL file from the remote PC, then the script opens iTunes using the updated ITL file.
This way I have a fresh copy of the remote library music every time. The problem is the music location under advanced settings. I can change it every time but I would like to make this as automatic as possible. The question I guess is if there is a way to lock the music location or have it change via a script every time iTunes opens.

You can't change the location of the media folder from a script, neither can you change which library file is opened. I assume your script simply copies the current master library into the normal location for the file on each client machine. Do you not get a file locked error? What about the other library files and the Album Artwork cache?
Your scheme may work best if you use a common drive letter for your media folder and have it so the media folder is not inside the master library folder. E.g.
Master library folder at X:\iTunes
Master media folder at X:\iTunes Media
Where all the computers see drive X: as the same object, be it the whole of that drive or a shared folder on it.
If you have the typical arrangement (iTunes Media inside iTunes) then when you copy the library from X:\iTunes into C:\....\iTunes and start iTunes it will attempt to "correct" for the fact that you've apparently moved the library and reset the library folder to C:\....\iTunes\iTunes Media. It should still be able to find the media at the correct location, but if you accidentally load anything up from a client machine it will end up in a local folder.
If you are not already familiar with it iTunes Folder Watch will be a useful tool for catching up with any additions made on the client computers. You should probably also ensure that each of the clients has the "Keep iTunes Media folder organized" option disabled.
tt2

Editing text in Photoshop CS3 file causes crash. File originally created in Photoshop CS6

Trying to edit text in Photoshop CS3 file causes a crash - Tried on multiple PC's
File originally created in Photoshop CS6 with "Maximise PSD/PSB File Compatibility" set at "Always".
Document size A4, using Arial Regular. RGB. 8Bits. 72dpi
Colour Profile: sRGB IEC61966
Multi business licence for CS3 and CS6 Design Standard/Premium/Master Collection all on PC
Please Help!

Interestingly I have found that if I modify a document in CS6 from an earlier CS3-CS5 document and save it - it works fine. But if I create a new document in CS6 the issue persists.
Looks like I will be modifying old documents for the time being
Would be grateful for some advise eon this.

Found 0 results for My browser is missing important items, the whole tool bar...., drop down menu to print, copy, work off line, file, save, book mark, history. I just installed latest foxfire on windows xp. Found some instructions but they called for usi

Found 0 results for My browser is missing important items, the whole tool bar...., drop down menu to print, copy, work off line, file, save, book mark, history. I just installed latest foxfire on windows xp. Found some instructions but they called for using keys my computer doesn't have ( key in OSX There is no file, edit , history, help, tools, navigation, all the things your directions say to use. Also I always get hung up and the message a scrip is running. I don't know what thises scrips are but I sure don't need them.
== This happened ==
Every time Firefox opened
== I just noticed it. It probably happened when I upgraded foxfire.

'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(Linux & OSX see: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M
''Windows'' Method 2. Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''

Edit copy in a CS6 file, but lock formatting of parts of the file

Similar Messages

Maybe you are looking for