Edit customisation in Business graphics is not working

Hi Experts,
I created business graphic UI element of chart type "Speedo meter" . I am trying to chnage the colors of the chart by using
'EDIT CUSTOMISATION' .When i change the clors in preview colors are chnaging but when i test my application it is nit showing the whatever i did in edit customisation ( ni color change ) . Please tell me do i need to configure anything ?
Thanks in advance,
Setu

Hi,
please refer below link .
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/ca932ebc-0901-0010-68a0-b4dd81a4bf81&overridelayout=true]
Regards,
Priya

Similar Messages

  • TS4317 graphics cards not work

    video file is not working graphics card not working is their is any software that i can update. or tell me why its not working

    If you can see an image on your screen then your graphics card (Intel HD Graphics 3000) integrated into your 13" machine is working just fine.
    I'm not sure what you mean when you say that a video file isn't working... how exactly isn't it 'working' and what file format is it in?
    Clinton

  • How do I paste a screen capture? Edit-paste or command-V do not work.

    How do I paste a screen capture? Edit-paste or command-V do not work.  Tom

    how did you take the screenshot?
    if you used a key combo like command+shift+ a number it will be saved as a file on your desktop
    you need to add control* to whatever key combination you pressed to put it on your clipboard
    *sorry for saying shift before i meant control

  • Graphical editor not working

    Hi,
    SAP Graphical editor not working.  I am getting the following error.
    EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
    Last week its sucessfully working but suddenly happen this issue... This problem in development server only. In production server is sucessfully working.
    Please advise...
    Regards
    Rajesh.

    Hi Rajesh,
    It looks to be RFC connection issue.
    Refer to various solutions described in below SAP note
    101971 - 37527 Graphical full screen is not available (RFC)
    Alternative
    Workaround
    You can prevent the termination of the RFC connection by increasing the value of the timeout parameter for the relevant RFC destination. Call transaction SM59, choose the TCP/IP connection "EU_SCRP_WN32" and branch to the "Special Options" tab page. In the section "Keep-Alive-Timeout" select the option "Specify Timeout" and enter a longer wait time (for example, 300 seconds). Undo this change once you use the corrected program version.
    Hope this helps.
    Regards,
    Deepak Kori

  • Probook g1 450 4th generation Intel Graphics Driver Not working

    After Updating Baios my laptop , graphics driver not working . install successfully but when    click the graphics driver icon , it's show the  massage ,GfxUiEx has stopped working .
    i am worried about it . what can i do ??
    i uninastalled driver then again install but this massage show again ,,,i use windows 8.1.
    massage is :

    @Ariful11 
    Thank you for using HP support forum. I have sent you a private message. If you’re unsure how to check your private messages please click here.
    Thank you,
    Omar
    I Work for HP

  • Window 10 upgrade. Graphics driver not working even after re-install

    Notebook pavilion DV6 3280.  Just upgraded to Windows 10 and AMD graphics driver not working even after re-install.  What do I do?  Is there another driver not on the HP Website that I should try?

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Customizing XML File in Business Graphics does'nt work for End Users

    Hi Experts,
    I have created an application using business graphic UI element for displaying graphs. I have some Customizing file settings done for it using Edit Customizing for its layout. As per my requirement, it works fine for me and other Developers. But when tested by End Users, that customizing file does'nt work. It shows a default graph's layout and XML file does'nt affect its layout.
    Can anybody help me with this Issue. Please reply soon.
    Thanks,
    Runal

    I resolved this issue by implementing SAP Note 1294871
    Thanks,
    Runal

  • Graphics Adapter not working

    Hello HP support, I ran a game after a long time and it was lagging, so i check and find out that it was not using dedicated graphics that is Radeon HD 8670m so i check device manager and there was only one display adapter which was the integrated graphics Intel(R) HD Graphics 4000. I then click on show hidden device and there it(Radeon HD 8670m) was, but i wasn't working it said that Currently, this hardware device is not connected to the computer. (Code 45). I then uninstall the driver in a hope that this problem will fix after reinstalling the drivers, but it does not!.... now there is no trace of the Graphics card not in the device manager not even hidden... What should i do? 

    Been there tried that.
    I have done a full backup and restore... and the joys of Microsoft's "This software has already been registered" hops.
    If the drivers are not recognising after the first run through or second... what makes you think they will after the third on a fresh install?
    The DVD restore is Vista Home, I have upgraded to Business and then to Ultimate out of desperation... that will make the 6th install and seeing as the issue hasn't been resolved in any of others I just think I'll be wasting my time.
    I think there must be something more fundemental not working if the driver can't find resources.

  • Hyperlink to open a business object is not working in archived printlist

    Hi
    I have archived a print list in my custom http content repository.
    Generated the indexed print list by running program OACONTA4.
    Archived data file has following lines
       \PCOL5H\PHYP<<BUS2012   \PCOL0H \PHYP>>   \PCOL2HPurchase Order                         
    IDARC1<OBJTYPE>BUS2012<OBJKEY>4500000001<METHOD>DISPLAY \PCOL0H  \PCOL4H4500000001                                       
    \PCOL0H  \PCOL2HZODTIF    \PCOL0H    \PCOL2HTest Image Documents               
    \PCOL0H  \PCOL5H\PHYP<<ZW            DE0978D42F2FA9F1AEDE0019B934DDB9       \PHYP>>
    IDARC1<OBJTYPE>IMAGE<OBJKEY>ZWDE0978D42F2FA9F1AEDE0019B934DDB9<METHOD>DISPLAY                                                                            
    \PCOL0H  \PCOL2H23.02.2009\PCOL0H    \PCOL2H         
    I am able to open archived print list using OADR.
    The hyperlinks in archived file are highlighted with different color  and cusror change when moved to "BUS2012" or "ZW            DE0978D42F2FA9F1AEDE0019B934DDB9       "
    Here "DE0978D42F2FA9F1AEDE0019B934DDB9" is archived document Id
    "4500000001" is purchase order number
    "ZW" is content repository
    "ZODTIF" is document type.
    But when I try to open the business object or the document, nothing happens.
    Then I changed the DARC line in the data file in repository to
    IDARC0ZW        DE0978D42F2FA9F1AEDE0019B934DDB9       
    After this I was able to open the document from link.
    Can anybody help on this? Why hyperlink is not working to open a business object
    Version details :
    SAP ERP ECC 6.0
    SAP NW 7.0
    References :
    http://help.sap.com/saphelp_40b/helpdata/pt/4f/9938ff446d11d189700000e8322d00/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/4f/9938ff446d11d189700000e8322d00/frameset.htm
    Thanks in advance !
    Ruhi

    Uninstall the ASK toolbar from addons and problem ll be solved.
    Tools>> addons >> uninstall ASK /Foxit toolbar >> Problem solved

  • Business Planning is not working in Portal BI iviews

    it give me error of JCO . SLD is fine, and JCO is configured but it still does not work. help me please

    Hi,
    Please refer to this link : http://help.sap.com/saphelp_nw04s/helpdata/en/fa/c1194276e0de2ce10000000a1550b0/frameset.htm. This documentation provides all the information you need to configure and run business planning on Portal.
    Just refer to the section Tasks -> Business Planning Scenario Variant. It refers to the JCo Connections and other configurations you would need to maintain.
    Hope this helps.
    Cheers,
    Sunil
    PS: Reward points for helpful answers.

  • Business service is not working in sender side but business system is working soap to idoc but why like that

    i have  scenario SOAP to IDOC
    when i'm using business service in sender side it is getting an error as follows
    sender message can not convert to ALE Logical system
    in this i'm using altova spy as testing tool
    my sender interface is asynchronous
    but when i'm using business system everything is working fine
    In sender side i'm using soap adapter,i checked the logical system everything is fine
    mainly the problem is why it is working when i'm using business system rather than business service
    my pi version is pi 7.0
    thanks in advance
    regards
    satish

    Hi Satish,
    You are sending IDOC's to SAP system right. we should create Business system not business service.
    so we should create the business system as web AS ABAP in SLD and import the same in ID.
    When we create the business system in SLD the logical system name is assigned for the business system. like SAPCLNT100...It plays a key role in IDOC scenarios.
    sender message can not convert to ALE Logical system
    Reasons for this issue is
    1) logical system name is unable to read from SLD for that corresponding business system.
    Goto business system click on Adapter specific identifiers from the menu --> read from SLD.
    it will automatically fetch the logical system name from the SLD.
    2) Sometimes the logical system name will be deleted from the business system in SLD.
    Delete the business system and re-create it, and follow the above procedure.it will resolve your issue.
    Regards
    Bhargava Krishna

  • "Edit Menu in Photoshop" function is not working anymore due to new install of Photoshop.

    I had Photoshop 7.0 installed on my system, and the "Edit Menu in Photoshop" function would bring up Photoshop 7.0, no problem.
    I then installed Photoshop CS3.
    When I pressed the "Edit Menu in Photoshop" button, it would still bring up the old Photoshop 7.0. Then I uninstalled Photoshop 7.0. Now, when I press the button, I get, "Could not edit in Photoshop. Photoshop does not appear to be installed."
    Does anybody know where I can configure Encore (CS3), so that it will recognize Photoshop CS3? If not, what do I need to do to make this work (uninstall and install Encore?)

    Andy,
    I think that Jeff got the problem handled, but this is something that we will all be living with for some time - dead links to FAQ's, other articles and the like. Stanely Jones had done a good job of finding many of the "lost" articles from the previous forum changeover. Don't know if he'll be motivated to do it all over again.
    I would like to think that Adobe has someone working on getting some of the old stuff back, or at least re-linked. Right now, the various search engines still have the old dead links in most of their searches. I guess that it will take the 'bots a while to catch up, if they ever do.
    At least Jeff & Neil have gotten some of the FAQ's back up and working. Good job!
    Hunt

  • Photoshop CS5/Lightroom 3 integration issue - "Edit Copy with Lightroom Adjustments" does not work

    When clicking "Edit Copy with Lightoomroom Adjustments" from Lightroom, I get an error in Lightroom 3 complaining that the Camera Raw plug-in is not up to date; full message below.
    "This version of Lightroom may require the Photoshop Camera Raw plug-in version 6.1 for full compatibility.
    Camera Raw version 4.6 is the latest version available for Photoshop CS3. If raw file support for your camera was introduced after Camera Raw 4.6, the Photoshop integration features in Lightroom require Photoshop CS4 and the latest Camera Raw version 5 plug-in.
    The version of Camera Raw plug-in currently installed is 0.0."
    After I click "Open Anyways", Photoshop CS5 is initiated but it seems to have lost context of why it is opened and asks me what file I want to open (i.e. the Open As dialog).
    "Edit Copy" and "Edit Original" from Lightroom 3 works as expected and opens images fine in Photoshop, CS5 however.
    My installation is on Windows 7. I currently also have Lightroom 1.4 and Photoshop CS3 installed. Everything worked fine with the old configuration. I also tried the same workflow in Lightroom 1.4 again just now, which is now linked to CS5 instead of CS3. The "Edit Copy with Lightroom Adjustments" also work just fine.
    Things that I have tried but do not worked:
    I did an Update via the Help -> Update menu, and also manually downloaded the Camera Raw 6.1 plug-in.
    Blew away the Photoshop preferences file
    Made sure that Lightroom 3 points to Photoshop for editor
    I'm thinking that I'll try uninstall CS3 next. Anyone else encountered this issue?

    [CS5.1 (12.1) ACR 6.5RC / LR 3.5RC; MacbookPro 4gb Leopard 10.5.8 ] As a Lightroom instructor, up until now this has been a vexxing problem to explain to my students. Even if ACR in Photoshop is up to date (I just downloaded 6.5RC and installed the PS Plugin), I still get the error when attempting to edit from Lightroom 3.5RC. I deleted the PS prefs file to no avail. I was not willing to re-install Photoshop as a solution (per some blog's suggestion), although that might be the ultimate answer. But what an ordeal if so!
    For a solution, I went back to a resolution I devised when I had a CS3 compatibility problem with LR3. I went into the Preferences of Lightroom and manually chose the Photoshop app as the "custom" image editor. I went back to edit the file in PS from Lightroom and the ACR error disappeared. Try it. Yes, this means you need to use the Custom editor as your image editor, but it seems to have resolved the issue.

  • Standard vga graphics adaptor not working

    the standard vga graphics adaptor of my hp laptop is not working its saying code 10. its an hp pavilion dv6 model 6b60sa.. intel coreTM i3-2330M [email protected] 2.20GHz. 64 bit

    Hi:
    You need to install the graphics driver if you see a standard vga adapter listed.
    You should be seeing two adapters...Intel HD graphics and AMD Radeon HD 6490M .
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-105178-1&cc=us&dlc=en&lc=en...

  • Mountain Lion, Automatic Graphics switching not working.

    I have noticed when upgraded to Mountain Lion that my automatic graphics switching is not working as i would expect ..When i start Chrome my discrete graphics Intel 3000 turned off and all i get is AMD HD grapchics without using any graphic intense proccess please help here is my screen shots :
    1: as you will see i have 1 tap open and nothing on the background except ACM 
    2: after 10 minutes writing on this post
         PLEASE HELP.

    I'm not sure that the dialog box indicates which graphics are currently being used? 
    Also, you have Google Chrome running.  It's possible that Chrome invokes the discrete GPU... they acknowledged they had some code in Chrome that was activating the GPU and actually causing kernel panics on the new Retina MacBook Pros recently...

Maybe you are looking for