Edit locally giving error "Operation Failed"

while edit document locally  in KM trough the command "edit locally". After clicking  on  "edit locally"a  digitalized signed applet  pops up with run and cancel button.(here applet is being set instead of Active x).I clicked cancelled. It shows the error "operation failed".Doesn't allow me even next time. Showing
How to solve the problems that even though I click the cancel, the next time same applet should popped up

Hello,
    i me having the same Issue when i try to edit KM File locally (Excel) -> Operation Failed Error.
    please advice how did u solved the Issue?
Thanks and Regards,
Nazih

Similar Messages

  • Local Module (Error-Handler) Failed the verify environment test

    When attempting to start the Messaging Server, the following error
    message occurs and the server fails to start:
    <P>
    19980226114147:Dispatch:Notification:Local Module (Error-Handler) Failed
    the verify environment test.
    <BR>Module not Loaded.
    <BR>Startup Problem:
    <BR>Module Error-Handler is required for proper operation.
    <BR>Netscape Messaging Server Exiting!
    <P>
    This problem can be caused by a corruption to the configuration file
    for the admin server that controls the Messaging server
    (install_dir/admin-serv/ns-admin.conf).
    Specifically, if the
    <B>Port</B> setting is missing, the above-mentioned error will occur.
    <P>
    Add a valid <B>Port</B> setting to the
    ns-admin.conf file and
    rerun the /etc/NscpMail start command.

    Is anyone having any idea about it...

  • 'Edit Locally' command Error -- IISProxy?

    Hi,
    We have a problem with 'Edit Locally' command since we are using Windows Authentication. Our architecture is:
    SAP EP 6.0 SP2 Patch 28 (Solaris)
    IIS Proxy (Windows 2003)
    The situation is:
    If we access to SAP Portal using old url (directly to Solaris) using form-based authentication we do not have any problem with 'edit locally' command.
    However, if we access to SAP Portal using IISProxy and Windows Authentication we get an 'Operation failed' error message.
         Java plug-in console shows the following message:
    cargar: clase com/sapportals/wcm/app/docapplet/DocApplet.class no encontrada.
    java.lang.ClassNotFoundException: com.sapportals.wcm.app.docapplet.DocApplet.class
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadCode(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: java.io.IOException: open HTTP connection failed.
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         ... 10 more
    Where is the problem? Is due to authentication method? SAP Portal or IISProxy configuration?
    Thanks,
    Damiá

    I'm having the same problem. Did you solved it?
    Thanks!

  • Making field input editable after giving error msg from table event 01

    Hi All,
    I have a requirement of giving error msg and making that row or the particular field input editable by writing code in table event 01 i.e before saving any record in a z-table i have to chk some condition for a column value and if that condition fails then i have to give error msg and make that column input editable.
    I have created a routine for event 01 and written the code to give error msg. But my problem is that column is not becoming input editable. Could you pls tell me how can i make that field editable?
    Thanks in advance.

    Hi Piyali,
    Use SET PARAMETER & GET PARAMETER ID  .
    You will get it.
    Best Regards,
    Pravin

  • Outlook error "operation failed"

    Hi All ,
    I am getting an error while attaching an outlook item in outlook 2007 as "operation failed"
    any solution?
    Thanx in advance

     Hi,
    You can resolve this issue by installing the Update Rollup 5 Version. Follow this link to easily resolve the issue: -
    http://support.microsoft.com/kb/2785908
    Regards
    Ashish@V

  • CSA 6.0 event log error - Operation Failed

    CSA 6.0.0.209, Windows 2003 server
    When viewing Event Log or any Group events, receive Operation Failed error. CSAMCLOG shows MS SQL timeout errors during these operations. However, I am able to view Host events and general events using Event Monitor.
    --Russell Manaois

    You are possibly encountering bug CSCtg78612.  This occurs when the CSA MC is updated from an earlier version of 6.0 to 6.0.2 and managed agents have not yet been upgraded.  You should be able to address the issue by scheduling agent upgrades for the affected hosts.
    You can view the full bug details here:
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtg78612
    Scott

  • Siebel Applet edit weblayout giving error in Windows 8

    Hi All,
    I have installed siebel 8.1.1.10 in windows 8. When i try to edit applet weblayout it is giving below error:
    Siebel
    This editor requires Microsoft Internet Explorer version 5 to be installed
    siebdev
    Failed to create empty document.
    OK  
    Please help me to resolve this.

    This sounds like the Platform Services service (the "Endeca HTTP Service" that runs port 8888) isn't up and running.
    From a command line, you can try
    net start "Endeca HTTP Service"
    To test, you can try http://localhost:8888/endeca_jspref  and see if the reference app at least loads up.  Then try initializing again.

  • Local network error: Connection Failed.

    I get the following error message when trying to access any of the computers on our local netwrok:
    Connection failed.
    The server may not exist or itnot operational at
    this time. Cjecl tje server name or IP address and
    your network connection and try again.
    The computers on the network show up in the Finder under Shared, but when I choose one of the icons, it shows up as Connection Failed - and nothing happens when clicking Connect As.

    Have you tried manually connecting to a shared Mac by its IP address?
    from the finder press command +K then enter the IP address of the mac you are trying to connect to.
    this would rule out an issue with ipv4 networking.
    then using the same method use the macs bonjour name. This is the computer name specified in that servers sharing preferences followed by .local
    eg.
    imac.local
    This would find out if the issue is with bonjour networking.
    Also in an earlier thread a mac could not connect to any shared computers and this was resolved by the procedure shown in Mac OS X 10.5: "The text entered does not appear to be a recognized URL format" alert when connecting to server or Time Machine

  • Edit KM document locally..Operation Failed??

    Hello,
       we are running SAP NW Portal 7.0, SP14 and KM, Browser: MS Internet Explroer 7.0.
       Now in KM when i try to edit a local Excel-sheet with the Command "Edit Locally" i get the following Error: "Operation Failed"...???!!! a Java Applet try to load, but does not apper in the Browser!
    Please advice how i can solve this Issue!
    Many Thanks and Regards,
    Nazih
    Edited by: Nazih Kayyali on Jan 27, 2009 12:20 PM

    Hi Nazih,
    First I would like you to ask you two things:
    1. Make use of the search here on SDN to find a solution to your problem. A similar question was actually asked yesterday!
    2. Please be more generous to the ones that answer your question. Looking through your old threads I barely see the use of any stars.
    Now to you question. As mentioned before I just summarized yesterday a list of notes that should help find a solution to problems with local editing, and now I just added this list to the Wiki for others to make additions:
    https://wiki.sdn.sap.com/wiki/display/KMC/HowtotroubleshootproblemswithLocalEditing
    Hope it will be helpful for you,
    Robert

  • Why do I get Operation Failed. [Error Code: -17500]?

    After test Stand has finished a test run and has generated a HTML file. I get the following Error Operation Failed [Error Code -17500]. The report is generated but not displayed in TestStand.

    Hi,
    Is this in the Operator Interface or the Sequence Editor,  and what version of TestStand are you using.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Remote Desktop Services Properties - Operation failed: Access is denied

    Hi
    when i try to change the Remote Desktop Services User Profile Path with ADUC i get the error "Operation failed: Access is denied"
    This error occurs in a subdomain with the Domain Admin of the Subdomain. I'm able to change this attribute with the Enterprise Admin.
    As far as I understand this attribute is set in the userParameters but I don't know what permissions must be set to allow the Domain Admin to change this Attribute and why the Enterprise Admin is allowed to change the Attribute and the subdomain Admin not.
    Our AD Schema is 2003.

    Hi,
    As per I know, this is by design because enterprise admin has full control in every domain within the forest but sub domain admin only has full control in its own domain. SO when subdomain admin try to modify they receive error instead of enterprise admin.
    But still if you want to assign the permission to subdomain user to change then you can delegate below permission to user.
    Read msTSProfilePath
    Write msTSProfilePath
    Snap:
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • "operation failed" when i try to download the new ...

    anyone has the same problem as me.  i tried downloading it via application manager and everytime i click and try to install it i get this error "operation failed" and closes the application manager.  is it the program or is it my n900 phone?

    virtuas wrote:
    anyone has the same problem as me.  i tried downloading it via application manager and everytime i click and try to install it i get this error "operation failed" and closes the application manager.  is it the program or is it my n900 phone?
    first 44-1 is not the current firmware.   if you "skip" a firmware ,or a pre-firmware release the device will force you to use NSU (nokia software updater) that is part of pc suite.
    1. backup device to sd card.
    2. do firmware install via pc suite.
    e. do restore
    since pc suite wipes the device it never gives you 'not enough memory' errors.

  • KM Document: edit locally - error occured "Operation Failed"

    Hi everyone!
    I am runnig SAP NetWeaver Portal 7.0 with MS Internet Explorer 7.0.
    I am trying to edit documents locally from the KM. Unfortunately it doesn´t work. Error occured "Operation Failed".
    I think all ActivX settings in the web browser are corecctly configured. I don´t think that there are problems with permissions of the document because it doesn´t work with personal documents too.
    Could the problem depend on MIME Type settings?
    What can i do to solve the problem?
    Looking forward for your helb and answers
    Dominik

    Hi Dominik,
    Open the Config tool and check if you this java parameters set for each server node:
    -Djava.io.tmpdir=
    if not, create a directory and add this parameters to each server node .
    After that, you should restart the J2ee server.
    Hope this help.
    Best regards,
    José

  • "Operation Failed" Messsage While editing documents locally

    Hi,
    I am getting a "Operation Failed" Message while i try to edit a document locally. What could be the possible problem?
    Regards
    Nithya

    Hello Nithya,
    We have had the same problems .We have a lock down desktop concept which means that the some .dll files(for activex to work) required for editing are not always registered/allowed to run.
    You could refer to note 755581
    I have the same problem wherein employees are not allowed to change the settings there are two solutions to it.Iam speaking to my network guys to get this sorted we have tested this on a remote client and it works after registering two .dll files.
    1)Use applet version.(But needs JRE installed on all client machines).
    2)Speak to your network administrator and get this two .dll files registered.
    or you can check with browser settings and make those changes.You can use some scripts which registers when they login.
    I would like to add that when i use domain adminstrator user account i get a pop up to install the activex.
    I am thank full to the sdn community who helped me to narrow down on this front.
    Should you need any details please feel free to post back.
    Regards
    Ajey

  • Error 'no local web solution for html engine installed. operation failed'

    Hi all
    I am trying to install JD Edwards EnterpriseOne.
    I have done the installation in one machine according to this queue:
    1) Installed the Oracle DB 11g
    2) Installed the Enterprise and Database Server
    3) Installed the Deployment Server and the installation finished successfully
    But when i try to navigate to the EntepriseOne menu I have the following message:
    "no local web solution for html engine installed. operation failed". Can you please suggest for any solution for this?
    I also did not install the html web server yet. Is this mandatory? Is this error related with this?
    Thank you and best regards

    Hi Bruno
    During installation I didn't enter any port, so could you please tell me if there is any default port for this isntallation.
    I red on the internet that port 6010 is the default port for EnterpriseOne so I entered the url: http://192.168.223.167:6010/jde/E1Menu.maf
    where this(192.168.223.167) is the IP of my server but still the page did not open.
    Do I have to start any service or something. Please help me to solve this issue.
    Thank you and best regards

Maybe you are looking for