Edit to video problem

Hi,
I'm trying to transfer footage from FCP to my mini-DV camera-- I have a firewire to mini-DV cable, and have been going through all the usual procedures, but... nothing. Any advice?
Thanks.

Shane's Stock Answer #8: External Monitor Viewing
If you are working with DV, this is simple. First connect your computer to a camera or deck via firewire, Then connect the camera/deck to your TV/Monitor via RCA or S-Video.
Then start up your camera and tv, then open fcp.
Go to the View Menu, choose > External video > all frames
VIEW>Video playback should be Apple firewire NTSC (If you are using an NTSC set)
VIEW>Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section.
If you are working with HDV footage, FCP 6 allows you to view this via firewire, but ONLY as downconverted DV. It won't look the best, but you can see it. To do this,
If you need to view any format other than DV at full resolution, then you need to look into capture cards. Several standard definition and high definition models are available from www.aja.com and www.decklink.com. With these options you'll need a proper monitor to view full broadcast colors, but all models allow for realtime standard definition downconvert, allowing you to view HD on an SD monitor.
The Matrox MXO is another option that is output only, but allows you to view your footage on an Apple Cinema Display at full broadcast quality.
Shane

Similar Messages

I am using elements & premiere 12 on my PC using windows 7. My problem is that photos in portrait view in slideshow are OK but when I move the slideshow to premiere to edit included video the portrait photos turn side-on and stretch when still in portrai

I am using elements & premiere 12 on my PC using windows 7. My problem is that photos in portrait view in slideshow are OK but when I move the slideshow to premiere to edit included video the portrait photos turn side-on and stretch when still in portrait view. Is there any way to prevent this from happening? Any comments would be appreciated.

Bruce369
What is the Output option that you are selecting for the transfer of the Elements Organizer 12/12.1 slideshow to Premiere Elements 12/12.1 Editor?
If you are using Edit with Premiere Elements output option, are you using the Premiere Elements command to break apart the Elements Organizer slideshow and then applying rotation to the portrait files? Or, it is this more than just a photo rotation matter?
More on this in the morning.
Please review and consider.
Thank you.
ATR

Video Problem - Cannot "Edit with iMovie"

In Aperture 3, when I right-click a video and select "Edit with iMovie", iMovie starts up but my video file does not appear. iMovie just sits there.
I have tried switching the "Edit with" program under Preferences to Final Cut Express, and FCE is able to display and edit the video. Just not iMovie.
I am shooting with a Nikon D300s at 24 FPS, 1280x720, under AVI.
Does anyone else have this problem or know of a fix?

Like you the idea of using Aperture to manage my video appeals to me, in my case though it is not practical as I could not keep the amount of vision I shoot live on the system.
The workflow I would suggest for your video content would be.
Set up a location for the video to be stored, a fast drive is needed for video editing.
Set up Aperture so that it imports the video by reference and store it on the aforementioned drive.
Sort, review and rate your videos using aperture.
Create an album containing the vision you want to use in a program.
In your video editing application, click import, in the import dialogue box you should now be able to navigate to the media and movies area of the import dialogue box, select APerture and select the album you want to use for the edit.
Tony

Video problems/settings -- cannot edit

im having video problems and the most relevent time i experience them is when playing video games
i know this may not seem the right place, but ive checked all the publisher's websites and their help is very limited, at least for mac anyway.
the thing is, it has occurred before many years ago, on a couple of distinct games, while i was using os 9. and now it has come back to haunt me in os x
1) one game, named 'warcraft 3' for those who know it, usually loads with an opening video and ever since some preferences were changed (all those years ago - i cant remember how) it only showed a blank white screen whenever the resolution adjusted for the purpose of showing any cinematics. this happens in both os 9 and os x
2) in the game 'quake 3' (which also opens up with trailers) it gets worse because whenever i load it in os x it goes to a blank screen and from then on no frantic clicking or escape buttons work. only applealtesc (force quit) force quits it, and strangely pressing enter does the same. The weirdest part is that now it works fine in os 9 with all the trailers and all, but in os x this event doesnt even allow me to play the game itself.
i feel strongly somehow that the problems are related, probably because of the omenous blank screen that comes up attempting to run each one
does anyone know anything of these settings and how i might change them?
i have a sneaking suspicioun that it has something to do with at least one of the following:
openGL (which i understand doesnt apply in os x cuz its integrated into the framework of the OS), resolution and refresh rate (i.e. hz), and perhaps rendering to throw in a loose term
for reference, i have none but the basic graphics (/cards) i.e. the ones that came with the machine, and the cinematics have worked on the first game in both operating systems, whilst i cannot recall ever running the second game in os x
thanks in advance
Lex
g4 powerbook 667 mhz 384mb ram 30gb hd Mac OS X (10.3.9) refurbished / relatively old

cannot change refresh rate in system prefs as it says 'N/A' in the greyed down drop down box
if i at some point put the refresh rate too high in one of the games or during a cinematic / in the application that runs the cinematics is there no way i can change that outside of the application/game?
thx in advance

T400 - Video problems and a long wait for repair...

Hi,
I'd just like to state my experience with Lenovo Customer Support for a video problem with my T400. Bottom line, as of today, it's been around 27 business days that it's been with Lenovo, and 41 days total since it's failed on me, and nobody, including Lenovo Customer Support, seems to know what its status is exactly, except that they're waiting on a part which has no ETA.
In July 2009, I bought a T400, a 2764CTO version with the switchable graphics between the internal intel graphics and the ATI GPU.
All was well until February 1st, 2010, when the LCD sudden wouldn't work. Well, it would work, but the screen was very very dim, even with the display maxed out on brightness. You would have literally bring your nose to the screen in order to even make out any text or images - definitely unusable. However, if you hooked up an external monitor via the video output, the T400 would display video output properly that way. When I did this, I noticed that the switchable graphics option wasn't there any more - couldn't switch to the ATI GPU. Based on this, I figured it must be a video card or LCD issue, or a combination of both.
So, I called Lenovo Customer Support (CS) at 1-800-565-3344, since I'm up here in Canada, and I initially was issued a case number of 41JRFSD, and I agreed to send it to a local Lenovo Repair Centre. Oops, my bad, I made a mistake using the locator tool I was told to use at bplocator.lenovo.com, and thought the Centre was relatively close. Not quite. So, I called Lenovo CS again, and they issued me with a new case number, 40KWSYF, and said they'd send a box for return to depot. And within 2 days, Feb 2nd or 3rd, I got a Purolator courier return box. That's fast service! Pleased, I put my T400 in according to instructions, and I sent it off.
Fast forward to about mid-February. I called Lenovo CS, and apparently there was a delay - the depot needed a part that wasn't in stock. Fine, I know these things can happen - I'll wait.
Fast forward to March 1st. I talk to a Lenovo CS rep, and it appears that the part needed has arrived, and they've put a rush order to get the computer back to me. Great!
Fast forward to March 8th, still no computer. I talk to another Lenovo CS rep... strange, there's no update. The issue gets escalated to the Depot managers.
Fast forward to March 12th. Still no word on my T400's status. An email fron CS has been sent to the depot. Not even the CS reps know what's going on. The rep I talk to figures there should be a response by the end of the day.
Fast forward to today, March 13th, 4:50pm Pacific Time. I just finish talking to Lenovo CS, there's been no response from the depot. Apparently there's a part that they're waiting on for repairs, but there's no ETA on it. Is it the same part that I've waiting on all this time? Is it a new one? I don't know.
At this point, I've been told to send an email explaining my situation, and I've also been told to talk to Scott the next time I call CS on Monday after 3pm Eastern. I have to stress that the Lenovo Customer Support Reps I've talked to have all been very sympathetic and have been courteous, helpful, and professional - something I appreciate from having worked in Customer Support myself. But the bottom line remains: my computer's not back to me.
So, my questions to the community here: is my experience here typical? Is there any hope of my seeing my computer back, or even at least just the hard drive? I've used Lenovo computers for work for the past 7 years, and it was my good work experiences that led me to buying a Lenovo for home use. However, it's been a while since I've been without my T400, and I was hoping to get my taxes done on the computer too, since they're due at the end of March. I'll reserve judgement on Lenovo until I get my computer back, but at this point, all I can say is... I'm disappointed.
If you're reading this, I'll let you judge my experience for youself. I'll update my case as it progresses.
Thanks!
Moderator edit: Removed support contact private information, per the Community Rules.

Hi all,
So, an update with some good news: my computer is finally back!
After a total of over 40 business days (just over 2 months) I finally have my T400 back at home, working again!
According to the spec sheets, the repair depot had to replace: the systemboard/planar, display/LCD panel, LCD cable, PC card, bluetooth, and the inverter. BIOS/Embedded controller was also updated, along with the regular diagnostics to ensure everything was working properly.
I give Lenovo credit though: they got the final parts to repair the computer on Monday, April 5th, and shipped my computer back to me for the next day (today, April 6th). That's fast service, once repaired!
However, my case spans over 4 screens of updates and repair depot orders of parts.
Also, it took me over 10 calls to Lenovo's Customer Service, plus an escalation to a higher-level manager after 1 month had passed, to get progress updates and ETAs for repair.
Lenovo called me only once to give me an update, and that was the manager whom my issue was escalated to: all the other times, I called Lenovo for an update.
The story doesn't end here, however:
In talking to Customer Support, they told me that Sales might be able to sell me an extended warranty at a discount, given the issues I had. And indeed, after talking to Sales, they offered me a 1 year warranty extension at a price of just over $100 CDN, plus tax. This is a sale price, compared to the regular retail of $129. Unfortunately, they can't sell me just one month.
At this point, I refused their offer, and again escalated to a manager to request an extension of exactly 1 month on my existing warranty. I figure 1 month delay in repairs, that's plausible - crap happens, and while most repairs take 5-10 business days, I can understand it can sometimes go higher. Two months though.... My request for a warranty extension is being considered by the manager it was escalated to.
So, one last question for you folks reading this: am I being unreasonable, talking to Lenovo support one more time to request a 1 month extension of my warranty, given the length of time it's taken for repairs? I'll post the response Lenovo will give me tomorrow, as they've said they'll do.
One thing for sure: Lenovo's response will definitely influence my choice of brand from whom to buy a new computer (and it will influence the choice of my friends who've heard my issues, and maybe yours too). My particular repair problem may not come up often, but if it does happen to you, I'd be happy to know of your experience.
Thanks for sticking with me through the drama!

Why does a Safe Boot fix my video problem?

After visiting my local Genius Bar twice (and getting two different answers), I erased and reinstalled Snow Leopard 10.6 on my late-2006 "white plastic" iMac.
I reinstalled the version of SL that came with the iMac, then upgraded it twice to OS 10.6.8. Software Updater says all of my OS components are up-to-date.
My video-corruption problems ("ghosting", "tearing", pixelation of icon, then the kernel CRASHES within 20 minutes) appear when I boot normally. But they permanently disappear when I reboot into the Safe Mode!
I've search Apple.com and every other site I can find without a clear answer to this:
What extensions, StartUp items, software daemons or gremlins DO NOT load in Safe Mode? Shouldn't one of them be the cause of my problem? Or does Safe Boot work on a hardware-level, too?
This happens on ALL accounts, both Admin and regular users. No external devices are connected except the wired mouse and wired keyboard.
I've zapped the PRAM three times, and I've unplugged it for hours. Disk Utility shows everything is good, too. There's about 50 gigs left on the internal 750 GB hard drive.
The so-called "Geniuses" both ran their Triage OS off an external drive and my iMac hardware passed ALL of their tests. One said it just needed a reinstall (a free fix!!), and the other said my video card is bad ($800, and I have to use an outside repair shop).
Can someone give me an idea how to proceed? I've been working in Safe Mode for days, but that prevents me from using: Sound, my home network, fonts, Preview, editing in iPhoto, etc.
Thanks.
Specs:
Model Name: iMac
Model Identifier: iMac6,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 3 GB
Purchase Date: March 2007

Hi, Mike,
Thanks for the quick reply.
I read the linked post about QE, but I don't see how it could help me troubleshoot my problem. Could you clarify: is QE a piece of "software" (that is, a file -- like an extension)?
If QE IS a piece of software that is disabled in a Safe Boot, I should be able to move it to my Desktop and restart. If my video problem is eliminated, the QE software is the problem, right?
But then, if my problem is caused by a file/extension, why would the problem occur (and be eliminated in a Safe Boot) right after I re-installed the OS? Shouldn't all the System software be pristine right after re-installation? But since it's NOT fixed by the re-installation, it seems like a hardware problem -- like the expensive video card. That's what's confusing me.
So, I'm proceeding as if the problem is caused by a file being loaded into memory and I'm trying to disable the items that don't load in Safe Boot Mode one-at-a-time. I just need a specific list of what those items are (and their locations on my hard drive).
In OS/9, I used Conflict Catcher to do this automatically, but I haven't found an OSX app to do the same. So I'm trying to do it manually.
Please excuse my layman's terms. Any help is appreciated.

Weird video problems with Mobility Radeon HD 4200

Recently pacman upgraded the video drivers for my video card:
[2011-04-17 12:48] upgraded xf86-input-acecad (1.4.0-4 -> 1.4.99_git20110318-1)
[2011-04-17 12:48] upgraded xf86-input-aiptek (1.3.1-2 -> 1.3.99_git20110318-1)
[2011-04-17 12:49] upgraded xf86-input-evdev (2.6.0-2 -> 2.6.0-3)
[2011-04-17 12:49] upgraded xf86-input-joystick (1.5.0-5 -> 1.5.99_git20110318-1)
[2011-04-17 12:49] upgraded xf86-input-keyboard (1.6.0-1 -> 1.6.0-2)
[2011-04-17 12:49] upgraded xf86-input-mouse (1.7.0-1 -> 1.7.0-2)
[2011-04-17 12:49] upgraded xf86-input-synaptics (1.4.0-1 -> 1.4.0-2)
[2011-04-17 12:49] upgraded xf86-input-vmmouse (12.7.0-1 -> 12.7.0-2)
[2011-04-17 12:49] upgraded xf86-input-void (1.3.1-1 -> 1.3.1.99_git20110318-1)
[2011-04-17 12:49] upgraded xf86-video-ati (6.14.0-2 -> 6.14.1-1)
[2011-04-17 12:49] upgraded xf86-video-vesa (2.3.0-4 -> 2.3.0-5)
[2011-04-17 12:49] upgraded xkeyboard-config (2.1-1 -> 2.2.1-1)
[2011-04-17 12:49] upgraded xorg-server-common (1.9.4.901-1 -> 1.10.1-1)
[2011-04-17 12:49] upgraded xorg-server (1.9.4.901-1 -> 1.10.1-1)
[2011-04-17 12:49] upgraded xvidcore (1.3.0-1 -> 1.3.1-1)
and now my video sometimes is glitchy. the output looks like this:
Also the computer crashes sometimes when I view a flash video in full screen or when I come back to the screen saver.
I think this has to do with the new video drivers but I'd like to know how I can fix the problem.
I don't know what other logs to provide as I'm pretty new (using arch for a 9 months) and I haven't had video problems before.
Last edited by sansar (2011-04-23 19:50:21)

I just noticed that the video card crashes after i come back from sleep mode.
Here's the kernel log: http://pastebin.ca/2050145
and the Xorg.log: http://pastebin.ca/2050146
For this crash, unlike the one that happens when I view a flash video full screen, the problem can be fixed if i log off and log back on.

HT5958 We are 4 min in to editing a video on final cut pro. now my computer is freezing up. I have heard that this is a glitch from downloading. (beyond frustrated) is this from working from 2 external hard drives? PLEASE HELP! =)

PLEASE HELP. =)
we are about 4 minutes into editing a video for the first time on final cut pro x 10.1. everything was going very smoothly, but then it started freezing up. I had to do a hard reset and took it into the computer store that actually installed final cut for us. they suggested that our mac actually is not capable of keeping up with final cut. (I FIND THIS HARD TO BELIEVE!!) We work on an IMAC 2.66 ghz intel core 2 duo. 8 gb 1067 mhz ddr3. software os x 10.9.1 (hopefully that info will help for your suggestions) Because we have soooooooooooo many hours of high def video, we are working off of two external hard drives.... is this a problem?? or do we really need to upgrade our computer?????

Like Russ said, check Activity Monitor and see what else is running and turn off any Applications that aren't needed.
Turn off wi-fi or disconnect the wire that goes to the Internet
Turn off Background Rendering (if you see an orange line on the top of the time line that moves along and gets shorter while you're not doing anything that is a good sign that Background Rendering is running.
I haven't used 10.1 yest but on the previous version there was a small circle approximately in the middle of the screen, about 1/2-inch or 1 cm in diameter, and it would have a number inside. The number is the percent complete of what is hapening. When it is Rendering the percentage will be shown.
Basically, you probably need to free up resources.
For what it is worth, my previous Mac Pro was a 1,1 2.66 machine, also with 8GB of, I think, 667 memory, and it would process FCPX 10.0.9 okay. It did have an upgraded video card, though.

How can I edit a video clip in PE and take it out of PE to use elsewhere?

I want to add edited video clips from PE to use in my photoshop slideshow. I would also like to use the edited clips in another programme, but I only get a file that can only be opened in PE. I have PE 4 and Photoshop 6.on a desktop PC using Vista.
Message was edited by: Mellieha

Many thanks for your reply.
I have video thumbnails from my video camera in My Videos folder. I would like to edit them individualy and return them to my folder as thumbnails again.
I hope I have explained my needs properly. I have made a slideshow including video on photoshop, but I get lost with it on PremE so I have kept to the job on PhotoEl. It seems to work for me apart from the problem of editing the video clips. I have added audio to the slideshow, but when it gets to a video clip I lose the video's sound. I would like to keep that rather than the added audio (music) that plays over the stills.
As you have no doubt realised, I am a beginner and a pensioner. Would senility be an excuse?
Thanks again,
John

My macbook pro freezes when I use peripherals, thunderbolt, USB.... and it becomes imposible to edit HD videos, any suggestions?

my macbook pro freezes when I use peripherals, thunderbolt, USB.... and it becomes imposible to edit HD videos, any suggestions?

The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I was almost finished editing my video and suddenly my video files just show a black screen and wont play.

I was almost finished editing my video and suddenly my video files just show a black screen and wont play.

MacBook Pro / Mozilla Firefox / Netflix / Silverlight Update solved - DON'T DWNLOAD FROM NETFLIX
I solved this problem tonight. I have a MacBook Pro with 10.5.8. I know, it's old. But I love my Netflix and I recently noticed that Firefox plays Netflix much better. Then I suddenly got this message that I needed to download the latest Silverlight - it only takes 30 seconds! - WRONG. However, after much searching, I finally did the steps in order and it worked.
This was after repeatedly downloading Silverlight from the Netflix site without success. So here's what I did:
1. Went to http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
2. Followed the directions. I felt like such an idiot for not doing it right before.
3. Go to your hard drive and search for "Silverlight" to locate ANY existing Silverlight files: .dmg, etc.
[also check your Libary/ Internet Plug-ins, but the above search is faster]
4. Drag it all to the trash and empty it.
5. Go back to the Get Silverlight page and click on the Install on that page, not the Netflix site.
6. Note the steps for Safari or Mozilla Firefox - I wanted Firefox, so I follwed those instructions.
7. Once it's installed, close all the browsers and Restart that bad boy. Right away.
8. Open a browser, go to Netflix and proceed to joyfully rot your brain with Netflix content. Yay!

Weird Video problem and kernel panic!

Okay, so last ngiht I was running tech tool maintenence, and I had repair on. So, it finished scanning my startup volume (I was on my eDrive) and then I shut down and restarted. Now, it tried to start from my startup volume (tiger 4.7, with latest updates) and it says you need to restart your computer (which means there is a kernel panic, am I right?) I try safe mode to no avail, I even reset the PMU and reset the PRAM (but I didnt hear the starup noise again). So, I put in my backup HD, and it starts up, but wait! Now the video is horribly wrong! It is all in TERRIBLE quality and in mostly only greys, I mean it looks like a 4 mb vram video card, there are very few pixels of color( there are some intermitedly) and there is terrible ghosting, and I can barely read anything. so, I checked my display, and universal access settings, and fooled around with those, and nothing happened. So, now I try and start from my eDriveand it start, but now it has the same horrible color problem as my other drive. Oh boy, this is a new computer, and I already have a kernel pnic, and a video problem, what can I do? Thanks for any help. Matthew. I have a sawtooth, a radeon 9200 flashed video card, and the latest tiger.

What if you tried running mplayer with the following command :
mplayer -fs -zoom filename
As for the "too pixelish" problem well... you could try increasing the "nice" level (at least in VLC). For the other video players I don't know.
Last edited by FizDev (2007-11-01 02:50:28)

Possible video problems in iTunes 8.1 [no grid or cover flow views]

I had posted this problem under iTunes, but mentors there suggested instead I connect it to a video problem
*"...my video drivers or other related problems I've had over the last two months with the iPhoto...*
*Ah, didn't know about that. Try re-posting it as a video problem in one of the other forums. It begins to look less like an iTunes problem."*
So, the problem is that I cannot get any other view in iTunes other than LIST. The grid view is completely non functional and is grayed out. The cover flow only shows as a black screen without any logo (such as the familiar music symbol). I never had this problem in iTunes until I upgraded to 8.1.
It is curious that when I select tunes from my **own playlists*, the grid view appears both in the "view choices" and its respective icon is NOT grayed out. That does not happen when I select genious playlist: then the icon is grayed out and there is a grayed out "View choice" in the pull down menu. The same problem exists in my own playlists whenever I select cover flow, however. It is always black without any images or logos displayed. It's an active choice in the pull down menu, and you can click on its icon...but nothing appears.
Message was edited by: Bronco 01
Message was edited by: Bronco 01

Carolyn Samit wrote:
HI Bronco,
Go here and make sure your Mac meets the minimum requirements for iTunes 8.1
http://www.apple.com/itunes/download/ <--- left side of the page</div>
*Macintosh Hardware*
*Mac computer with an Intel, PowerPC G5, G4, or G3 processor*
*Screen resolution of 1024x768 or greater*
*Playing videos purchased on the iTunes Store requires a Mac computer with an Intel, PowerPC G5 or _1.0GHz PowerPC G4 or faster processor_*
*Playing HD-quality videos purchased on the iTunes Store requires a 2.0GHz Intel Core 2 Duo or faster processor*
*512MB of RAM; 1GB is required to play HD-quality videos*
*Playing videos also requires at least 16MB of video RAM*
*A broadband Internet connection is required to use the iTunes Store*
*Macintosh Software*
*Mac OS X version 10.4.10 or later*
*QuickTime 7.5.5 or later*
*200MB of available disk space*
As best I can tell, my iMac meets all criteria. However, it is not clear to me that it meets the criteria for playing videos (processor speed). I can't tell what this processor speed is; where do I discover that? Under "About this Mac," it says I have *_512 MB SDRAM_*; is that the answer that denies this functionality?
*"The grid view is completely non functional and is grayed out. The cover flow only shows as a black screen without any logo (such as the familiar music symbol)."* Your video card may not support cover flow.
Carolyn
Perhaps, but this is not obvious to me. As I posted earlier, iTunes demonstrated cover flow capability in its prior version. Did it change once 8.1 and now 8.1.1 came out?
Message was edited by: Bronco 01

Hi! So I'm working on editing a video for my community theatre company and it won't share properly.

I edited the entire thing and it took me about 4 hours. I had a lot of footage to sort threw and lots of cuts that had to match up precisely because its all music and dancing and blablabla. I've worked with this program at school and I've never had a problem. So I downloaded the free trial (since we're out on winter break now) to edit my video. I went to share, as I have done on multiple other projects, but once the movie is shared it doesn't play. I've shared it to the masterfile as a quicktime movie but Quicktime can't play the movie even though its a .mov file. I tried to burn it right to a DVD but that also did nothing. Not a thing happened. I've tried to save it under different names as well but they don't even show up on my desktop or anywhere that I'm trying to save them for that matter. It's just really really frustrating that I cannot get it to work properly. I went online and read about some people with similar problems and nothing seemed to work. I changed the codec (I think thats what its called) because I read somewhere that Quicktime couldn't support a certain kind of file. I've fiddled with it. Tried to send it to itunes or save it to the computer or export the file separately. NOTHING is happening and its crucial that I get this video on the DVD for the director to view and seeing as how its my first time taping/editing I was hoping it would be timely and creative. Its turning out to be a nightmarish experience though. Please please help me out!

You didn't say what version your trial is. Is it 10.1?
Right click on one of the clips and hit Reveal in Finder. Then select the clip it takes you to and open it in Quick Time . Hjt Command-i and post a screen shot of the Inspector info
Russ

How to download a DVD movie into Premiere Elements 12 using my MacBook Pro so I can edit the video?

How to download a DVD movie into Premiere Elements 12 using my MacBook Pro so I can edit the video?

Bob Perez
Please review and consider the following which works for me in Premiere Elements 12 Window 64 bit.
From what you wrote, I suspect that you have DVD-VIDEO widescreen on DVD disc. For now I will assume that you are working in a NTSC setup.
Premiere Elements DVD-VIDEO on DVD disc is characterized as interlaced video with field order lower (bottom) field first. I am not sure how your DVD-VIDEO on DVD was produced - upper (top) field first or lower (bottom) field first. We may have to apply Field Option Reverse Field Dominance at the Timeline level, but for now let us put that aside for a later time.
Insert your DVD disc in the DVD burner tray.
Open Premiere Elements to the Expert workspace and set the project preset manually for NTSC DV Widescreen. How to details for manual project preset setting are found
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
Then, Add Media/DVD camera or Computer Drive/Video Importer.
The video files from the DVD-VIDEO will be the larger size files and will probably start with VTS_01_1.VOB.
In the Video Importer designate the save location for video file VOB(s) and select Add to Timeline and hit Get Media
to put the files on the Timeline for editing.
If you have more than one DVD disc to "rip", please set up the Video Importer Save In location so that the save in location has a folder for each disc. The fact that all DVDs have the same VTS_01_1.VOB name etc will cause problems if you saved all to the same place as individual files.
Determine how that works for you in your Mac computer environment. We will be watching for your progress.
Others may tell you that you need to convert the VOB to another format before import into Premiere Elements. That is no necessary for Premiere Elements.
Thank you.
ATR

Edit to video problem

Similar Messages

Maybe you are looking for