Editing a web site page

I recently published an iWeb page to .Mac. I then edited that page in iWeb but when I accessed the site with a browser, the editing changes were not there.
I went back to iWeb and the changes were there, so I published the page thinking it would replace the original page. Not so.
How do I make changes so that others can access my web site with a browser and view the changes?

I know this sounds very basic, but apart from the cache, I always make sure after editing, that I click File/Save. Early on, in January, I found one particular edit didn't kick in when I published - the second time I saved before publishing, and it did the trick.
Rachel.

Similar Messages

  • Can iWeb Be Used To Create and Edit Completely Seperate Web-Sites/Pages?

    Is it possible to use iWeb to create completely separate web-sites/pages? As far as I can tell even what is called NEW SITE simple creates a new nested SITE folder.
    I want to use iWeb to edit totally separate web-sites.
    I want to be able to make a single word change on my home page without having to upload and replace my entire site.
    My work around for example would be to keep my Photo and Movie Album separate (where most of my memory intensive files reside)from the part of my site which is mostly text. And when I make a single word change to my home page I would simply upload that page. I would have a link from my home page to my Photo and Movie Album - much like I edit web-pages in Dreamweaver.
    Any suggestions?
    thanks.

    There are many ways to create brand new Domain/Site/page, see my posts:
    http://discussions.apple.com/thread.jspa?messageID=6460488&#6460488
    http://discussions.apple.com/thread.jspa?messageID=6007612&#6007612
    Splitting domain.site(2) is bad juju:
    http://discussions.apple.com/thread.jspa?messageID=6261141&#6261141

  • Centering web site pages in Dreamweaver

    Just wondering if someone know's how to center web site pages
    using CSS if thats possible, if not what other way?
    (i'm using MX or 8)

    >I find that using body { text-align:center; } generaly
    center aligns text
    >and
    > div's all over the page, which I don't find desirable.
    Certainly. That's why most people use something like -
    body { text-align:center; }
    #wrapper { text-align:left;width:760px; margin:0 auto; }
    to center the page.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "daveCph" <[email protected]> wrote in
    message
    news:evks8r$c54$[email protected]..
    >I find that using body { text-align:center; } generaly
    center aligns text
    >and
    > div's all over the page, which I don't find desirable.
    You can try this:
    > <style type="text/css">
    > <!--
    > table#holdAll{width:100%; }
    > table#holdAll td#centerIt {text-align:center;}
    > div#mySite{width:960px;}
    > -->
    > </style>
    >
    > <table id="holdAll">
    > <tr>
    > <td id="centerIt">
    > <div id="mySite>
    > all your stuff here
    > </div>
    > </td>
    > </tr>
    > </table>
    >
    > hope it helped
    >
    > Dave (no smart quote)
    >

  • Centering Web site pages

    Just wondering if someone know's how to center your web site
    pages using CSS if thats possible, if not what other way?

    Please post this on the General discussion forum, where it
    will get more
    appropriate visibility.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "evanescence86" <[email protected]> wrote in
    message
    news:evdls9$6hu$[email protected]..
    > Just wondering if someone know's how to center your web
    site pages using
    > CSS if thats possible, if not what other way?

  • How do I edit my Top Sites Page on Mavericks?

    I am trying to figure out how do I edit the top sites page. Before you were able to click an edit button that allowed you to delete and pin the pages but now I can't figure it out. More specifically I want to know who to delete certain pages.

    I know this is old, but I just figured I would shed some light on solving the issue I think you are actually speaking of. When I upgraded, I immediately noticed I could not click "edit" in the bottom corner to change the amount of top sites, which slightly irritated me. I tried everything, and eventually thought they had done away with the feature altogether, but then I saw if you click safari (from here, that Bold Safari word in the top left corner of the screen) and choose 'preferences' it will take you to a tab that allows you to modify the number of top sites, allowing me to go back down to 6. Easier to read, easier to make sense of. (A lot of websites cannot be made out when they are '16 top site' size. So this was something I wanted to fix, with my 11" screen.) Hope this helps!

  • I'm using 3.6 &have a question 1st. I edit a web site English. WhenI updated awhile ago to another upgrade, the only way to edit was "iusing code". My question is, if I upgrade to yur latest verious, will it still allow me to edit in English, not code.

    I edit a web site using regular English language.
    A few months ago I updated to a newer version of Firefox and with that upgrade came the requirement to edit "in code". Therefore, I deleted the newer version and went back to 3.??.
    I am interested in updating to your latest version, but I do not want to unless you can veriy that I can continue editing this web site in regular English

    Which Firefox version do you currently have?
    You have a user agent that is corrupted and that identifies you as Firefox/3.0.10 instead of Firefox 3.6.25
    *Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.25) Gecko/20111212 Firefox/3.0.10 NET_mmhpset GTB7.1
    See:
    *https://support.mozilla.org/kb/Finding+your+Firefox+version
    *https://support.mozilla.org/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
    *http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default
    What do you mean with <b>edit "in code"</b>?
    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).

  • Editing a web site created in MS Front Page

    This may be a very simple question with a very simple answer:
    If a web site has been created, and was maintained, on a PC - how easy is it to take ownership and edit it using a Mac? (I am not a developer or anything close hence the possible stupidity of the question!)
    Thanks in advance!

    I'm a relatively new convert to a Mac and I have to say that this is the first time I have been disappointed by my choice.
    I have quite a few webs that I maintained with FrontPage and now I will have to drop them because I can't take the time to re-do each page within the sites just because I can't import the html coding into iWeb.
    It would be nice if the authors could make iWeb a bit more friendly in that regard. Even if only the basic layout, text, images and/or image holders could be imported, that would help.
    eMac G4/1.0 512 Mac OS X (10.4.8)
    eMac G4/1.0 512 Mac OS X (10.4.8)

  • Editing  a Web site SWF file

    Funky, allow me to try again. right words are difficult for
    me come by but I try.
    I have a Web site that uses a 260K Swf file for presentation.
    My original designer is no longer available.
    I am trying to make changes to update some of the info on the
    site. I have been able to update jpeg images
    in photo gallery which is an external xml file to and opened
    by the swf file. additionally I have updated some of the
    images within the "master" swf file using Eltima decompiler
    software.
    I am now try to update some of the Static Text files within
    the "master" swf file.
    I am using a MAC with the Eltima Decompiler and CS3 Flash.
    This is my first attempt to update/edit
    Static text.
    If you could quide me toward a correct course, I would
    appreciate it.
    I open the "master" swf in eltima and extract only "text" I
    am not doing anything with images, buttons etc.
    I convert that ouput into Fla. A "master"_conv_fla file is
    created along with a folder called text that has multiple
    Static Text xx.swf file within. The fla file opens in adobe
    but doesnt contain the file I want to update.
    using Eltima I open the Static text 53.swf, perform an
    extract and then convert that to a Static text 53_conv.fla file
    that opens in adobe.
    Here I am lost. I have used trial and error to get a
    response. I might mention that the original designer used Adobe 6.
    With the Static text 53_conv.fla file open in adobe I seem to only
    be able to make changes when I click on
    Edit Symbols. I make changes and do a Save As so that Adobe 8
    is used. I assume Adobe 9 might not allow my file to function.
    After saving I Export the result back to my computers texts
    file. That file then appears as Static text 3.swf.
    instead of Static text 53.swf
    It has the results I want but I don't know how the make the
    changes take in the Static text 53.swf file.
    I am not even sure the steps I have taken above are even
    correct. It was all I could do to get any result.
    Your guidance would be appreciated

    I'm a relatively new convert to a Mac and I have to say that this is the first time I have been disappointed by my choice.
    I have quite a few webs that I maintained with FrontPage and now I will have to drop them because I can't take the time to re-do each page within the sites just because I can't import the html coding into iWeb.
    It would be nice if the authors could make iWeb a bit more friendly in that regard. Even if only the basic layout, text, images and/or image holders could be imported, that would help.
    eMac G4/1.0 512 Mac OS X (10.4.8)
    eMac G4/1.0 512 Mac OS X (10.4.8)

  • How edit Firefox web site preview font type? (About chinese problem)

    Hello guy ,
    I have problem , this chinese font not of good and preview have problem , can't show some font .
    how setting size font or use other chinese font type to preview web site ?
    Thank !
    Last edited by wing (2014-11-16 15:27:05)

    Yes , i read and  saw the wiki https://wiki.archlinux.org/index.php/Font_configuration , or https://wiki.archlinux.org/index.php/Firefox , but i am not sure which page is setting my problem .
    This is LinuxMint use firefox to preview web site
    http://i60.tinypic.com/2dbqmc2.png
    http://i58.tinypic.com/2mwy16f.png
    And This is ArchLinux to preview firefox web site
    http://i60.tinypic.com/2z3vznq.png
    http://i59.tinypic.com/21j7mgn.png
    i don't why some font is very big , some font is small and can't to show the font
    -- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
    Last edited by wing (2014-11-17 07:59:44)

  • Standard Edition - Single Web Site/Application?

    Hi,
    I hope I am posting at the right section of the forum...
    I'm considering using Coldfusion for our company intranet.
    However, reading the difference editions availabe, I notice that
    the standard edition is only allowed for "a single web site/single
    application."
    So what is Adobe's definition of "an application?" If our
    "application" provides many functions to different departments of
    the company, does it count as one application or multiple
    applications?
    Thanks in advance for any answers, comments or suggestions.
    Lawrence Mak

    lawrencem49 wrote:
    > Dear Azadi,
    >
    > Thanks for your help! That certainly cleared up a lot of
    my doubt. Wonder why they have to term it that way though...
    >
    > Lawrence Mak
    There as always been some confusion one the term
    'Application'. When
    talking ColdFusion editions, it is ColdFusion itself that is
    the
    application. With Standard you can have one ColdFusion
    application
    installed on a given box up to 2 cpu's per license. With
    Enterprise you
    can have as many ColdFusion applications as you feel
    comfortable loading
    onto a given box, again up to 2 cpu's per license.
    Each of these ColdFusion applications whether Standard or
    Enterprise can
    have as many web sites as you care to load it down with
    connected to it.

  • When a web site page can't be found why does it go to yahoo with a message

    I will be on a web site doesn't matter which one and if I click to go to the next page, and it can't find it yahoo comes up with some crap I hate yahoo and if I can't fix this I will delete firefox and use something else

    Some internet services and some add-ons may be paid by Yahoo to show you that page.
    Does the Yahoo page mention DNS Solutions or similar language? Does it show a Help or About link that might lead to a page where you can "opt out" of the service?
    To check whether one of your extensions is the culprit, you could test in Firefox's Safe Mode. That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using either:
    * "3-bar" menu button > "?" button > Restart with Add-ons Disabled
    * Help menu > Restart with Add-ons Disabled
    Not all add-ons are disabled: Flash and other plugins still run
    After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
    Any difference?

  • Firefox will not load my web site page ? there nothing wrog with the server, because I checked, and the page opens fine in chrome ? I am using a mac os 10

    my web page was loading fine in firefox, but after updating some video footage from youtube the site on longer opened. even though I have er strted the computer firefox is still not openning my web site, where as chrome is ?
    /

    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • How can I copy, paste, and email a web site page?

    Hello.  Basic Safari question: How can I Copy, then paste, web site content from Safari, into a document (ie. Powerpoint Presentation)?  I am interested in copying / pasting so that the content in the document looks (formatted) identical to the content on the web site?
    Thanks!
    KD
    ps.  R.I.P. S.J.

    This one kills me as well - editing phone numbers in the keypad/dialer is a pretty basic function, I could never fathom why it didn't exist.  We need to be able to place a cursor, and copy/paste part-numbers!  I'm constantly trying to paste just an area code, or an extension, or insert the country code, and I should not need to create a new number in the contact directory to do it!
    Currently I do the copy/paste editing in Notes, and then paste the corrected number into the dialer - pointless and inefficient, and contrary to the Apple philosophy of making the user experience easy and seamless...

  • Hello i have a problem with my mozilla brower that on my mozilla crose type always show, i'am the click on a text at a web site page this crose be shown.

    normal time for see , type point (I) while u written at a textbox but on my Mozilla web browser i always see this point and while select a text or click on web site and this be shown on first line of pragraph and i click the test its shown on text i tired of this topic please help me thanks.

    You may have switched on caret browsing.
    *http://kb.mozillazine.org/accessibility.browsewithcaret
    You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
    *Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
    *http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
    *http://kb.mozillazine.org/Accessibility_features_of_Firefox

  • Editing a web site using windows that was made with iweb using a MAC

    I published my web site using iweb with my MBP, but at times would like to edit it when I'm running windows. Anyone know how to do it?

    You can't. To edit a site created by iweb, you must be using a mac with iweb installed and also with the Domain file installed that was used to create the site.
    http://homepage.mac.com/thgewecke/iwebdata.html
    Of course you can mess with the html and other files created by iWeb with any app you please, but any changes will be overwritten if you republish from iWeb later.

Maybe you are looking for