Editing DataSource Properties

Hi,
I have added connection pool and JDBC resource to the server. While creating the pool I had provided
the properties like username / password / database... Now when I open the properties link , I can't see
these properties ( even after restarting the server).
I want to edit the properties, How to do this , Should I need to recreate the pool .
Is there any way I can register the datascource using the xml file as supported in iAS6.0.
Thanks,
Prakash

Hi Prakash,
I assume you were using the Admin GUI. Did you click the Apply Changes Required link in the upper right
hand side of the window to apply the outstanding JDBC connection pool and resource changes ? Please
refer to the Getting Start Guide on the following link for detailed steps to do all these. The step 6 below
from the Guide gives the reason why need to do the Apply Changes step.
http://docs.sun.com/source/816-7146-10/ch6-database-setup.html
6. Click the Finish button to complete the wizard. As a result of completing the JDBC connection pool
wizard, the administrative server recognizes that although changes have been made to the server's
configuration, the changes have not yet been applied to the active configuration. Consequently, several
warning icons are displayed in the administrative console to inform you that pending changes need to
be applied before they take effect.
Thanks,
Judy

Similar Messages

Cannot edit folder properties more than once???

If I edit a folder property so that the links opens in the same folder area, it gives me the following error if I try to edit the properties again.
An Unhandled Exception has occurred. ORA-06502: PL/SQL: numeric or value error: character to number conversion error
And for the same folder I get the following error if I click to preview it while editing.
Error: Call to utl_http failed (WWS-32136)
ORA-1: User-Defined Exception (WWC-36000)
If anyone has a workaround for these errors, it will be appreciated.
-Viral

Hi ell_ell_tee,
I just checked it works fine for me. I used this page actually. Have you checked to see if it is just the particular website that you were looking at? It could be an isolated incident.
You could also try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
Hopefully this helps!

How to edit hyperlink properties in Acrobat Pro 9?

I'm trying to edit a PDF document (generated from Windows Word) on my Mac with Acrobat Pro 9.
What I want to do is make the borders invisible, because in Mac Preview the hyperlinks appear with ugly boxes around them. Apparently when no borderWidth property is set, Acrobat Reader defaults to a value of 0, but Preview defaults to a value of 1.
I selected Tools > Advanced Editing > Link tool and can see all the hyperlink boxes.
But I can't find a way to edit their properties.
I tried double-clicking on the rectangles, which is what it says to do in the manual, but nothing happens.
I tried control-click on a rectangle and a dialog pops up. I select properties from the dialog, but no properties appear.
Anybody know how to get this to work?
Thanks,
doug

Wow GQDiaz,
What a wonderful gift you have given us! You have saved me hours of shuffling pages one by one between large cumbersome document scans.
Your script works like a dream. Thank you for this gift.
With kind regards,
jaxios

How to edit the properties.

I installed a tool in LiveCycle called "LiveCycle Workbench". I dont know how to edit the properties of Reader Extensions server and deselect [CommentsOnline] through Workbench. Please kindly advice me in detail with examples or samples.
Thanks,
Prabudass

This is the Help topic for the Apply Usage Rights operation that the Reader Extensions service provides:
http://livedocs.adobe.com/livecycle/es/wb_help/00000949.html
If you are new to LiveCycle, you should work through this tutorial to learn the basics:
http://livedocs.adobe.com/livecycle/es/wb_help/00000405.html
Scott

How to edit breadcrumb properties like " " symbol in JDeveloper.

Hi, the problem is that I can not edit certain properties breadcrumb, like spaces or ">" symbol. I have change the css style to my own style. When I use oracle style it's work.
For example.
1) Html generated with oracle style.
P1 > P2
2) Html generated with my own css.
P1P2
As can you see, the line "  >  " have dissapear. Are there some template or file to define this line?, what I need to do to place this line?.
I 'm lost.
Thank you.
ADF Business Components     10.1.3.41.57
BPEL Designer     10.1.3.3.0 (Build 070615.0525)
CVS Version     Internal to Oracle JDeveloper (client-only)
Java(TM) Platform     1.5.0_06
Oracle IDE     10.1.3.41.57
Struts Modeler Version     10.1.3.41.57
UML Modelers Version     10.1.3.41.57
Versioning Support     10.1.3.41.57
Message was edited by:
pakitwo

I found the answer:
Write in your own .css file:
"af|menuPath::separator-icon {content:" > ";}"
and breadcrumb will get this value

Can you edit file properties using Labview?

Except for the file attributes like 'read-only' and 'hidden', Windows 2000 & XP also have file properties like 'keywords', 'comments' and 'description'.
Is there any way that I can edit these properties in Labview?

RichElswick wrote:
nope, we never got that far and I am no longer on that project.
And it would be a bitch to implement. Basically those properties are implement using propertysheet handlers. That are shell extensions that can be installed in Windows and in the registry added to one or more file types. On loading the property dialog the shell (basically only an Explorer thing) sees that for that specific file type there are property sheet handlers registered and then loads them as an extra property sheet into the dialog.
There is no common API to retrieve and lets forget about changing the information those property sheet handlers deal with programmatically. And every property sheet handler retrieves the actual properties according to his own private information, such as image properties in JPG files but possible also extra information in the meta data of a file on advanced files systems such as NTFS (the security property sheet for instance).
So you would have to create a Windows dialog, load the according property sheet handlers into it and then have the user deal with that interactively. I doubt that this is what you want.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Bulk Edit Image Properties

I'm creating a site with numerous slideshows (sometimes with 50 pictures or more) and it's looking like the only way to enter the image properties is to click on each thumbnail image to bring it up at the top and then right click on it and go to image properties.
Please someone tell me there's a better, more efficient way to do this!
Thanks

mykellysue, I think you may have misunderstood the original post and Sachin's reply. The original post was about setting the properties of an image (referring to alternate text and/or tooltip text). Those properties are normally set by right clicking on an image, selecting "Edit Image Properties" and entering the values. In this case the customer had many images. In that case you can select multiple images in the Assets panel and set their properties all at once.
As far as how to use a Composition widget, a composition widget is made up of a set of related containers. A trigger container (which you click on or mouse over) and a target container (which appears in response to interaction with the trigger.
For the most part you can put anything you want in the trigger container or the target container and you can add or remove pairs of containers to/from most Composition widgets.
Some of the Composition widgets in the Widget Library panel contain sample content. Ultimately these are just samples. You can select and delete the sample content and drag in whatever is needed for your design.
There are tutorials and videos available at muse.adobe.com.

How to edit repository.properties

How to edit repository.properties.
I want to edit the file
http://<host>:<httpPort>/dtr/ws/system/config/active/registry/repository.properties
Kindly give me the step by step procedure. Precisely how can i check out this file using NWDS.
Appreciate your response.
Thanks,
Prasanna Krishnamurthy

This is the Help topic for the Apply Usage Rights operation that the Reader Extensions service provides:
http://livedocs.adobe.com/livecycle/es/wb_help/00000949.html
If you are new to LiveCycle, you should work through this tutorial to learn the basics:
http://livedocs.adobe.com/livecycle/es/wb_help/00000405.html
Scott

Advanced edit hyperlink-properties grayed out the first time

advanced edit hyperlink-properties grayed out the first time
Sub Problem:
When using the advanced edit cursor, right click Is used to select a hyperlink-properties the first time the dialog box pops up it does not have “focus” (not sure that is the right term, but the box is grayed out and will not respond to the keyboard.). It must be mouse clicked to get focus. The second time a link is right clicked to properties the popup responds to the key board and will move to the action tab with ctrl-tab
It’s not clear to me where the acrobat program is at that point.
Is that a known action or problem with acrobat pro 9.4.4?
Is there a key or keys from the keyboard that can force focus to the box?
The problem is each file I open I have to manually find a link and right click it to get the box then click in the box to get “focus”. After the first one the box pops up with focus.
John
Main Problem:
I have been working on converting a set of pdf files with 1000’s of hyperlinks like www.site.com\folder1\file1.pdf#page=10
To jump to a local copy of the files with a relative type link
../folder1/file1.pdf and then go to the proper page.
I have found that it can be done manually by changing the hyperlink to a javascript
var otherDoc = app.openDoc('../folder1/file1.pdf', this);otherDoc.pageNum = 10 - 1;
and setting each destination file with a disclose()=true;
Based on the help so far that java script cannot access the hyperlink value in a link
See: http://forums.adobe.com/thread/1039908?tstart=60
I have resorted to the following plan using acrobat javascript, an external keyboard macro recorder and excel in combination to get around the problem
Four folder level acrobat javascripts with “buttons”
One to get all the link quads in an array, in the pdf and report the total number
The second creates a form field in the far corner of the first page and moves there.
The third jumps to each link found by creating a form field just to the left of the link and zooms in so it can be selected by a “mouse click” from the keyboard macro recorder
The forth deletes the form field
The keyboard macro recorder runs javascript 2 and then 3 then clicks on the link just to the right of the middle of the screen and uses keys to get to the advanced editing to get to edit the hyperlink .
The hyperlink is then copied to excel where it is converted using string functions to the needed javascript text to be copied back.
To the acrobat file into a java script (after deleting the hyperlink)
Rinse/lather/repeat
I have been able to convert about 150 links an hour.
Better then hand typing, but not like having java access to the links.
I am looking to improve the solution

Rick,
I didn't intend to say you must close the X box after each
apply. It's OK to apply one change and go to another item before
closing the dialogue. It's the OK button that messes up sometimes.
Even when you hit the Apply button for a very large selection
of topics, the OK button sometimes will undo the apply, not
necessarily for all selected topics. Even when you've made just one
batch change.
I think it's because OK tries to re-set all settings (that's
why it takes forever), but does not correctly pick up the mass
changes previously applied. Or maybe it takes forever because it
can't find the new info and defaults to the existing settings.
A pain in the butt when you're trying to apply a stylesheet
to a very large number of topics. Please don't ask me to define "a
large number."
Maybe it's a space limit in RH, similar to the space limit
for the number of characters in a batch of file names you want to
import. Or maybe the OK button doesn't look in the right places.
Harvey

Editing the properties of the closed captioning area.

Is there a way to edit the properties of the closed captioning (CC) area. I mean besides the number of lines and font type and size.
For instance in a responsive design project the closed captioning runs under the X to close the CC window in the phone view.
I know if they have a phone why would they want to see the CC, but someone has asked us to see about fixing that.

The file extension does not matter. It is an .html file. I put it right after the existing Style:
<style type="text/css">#initialLoading{background:url(assets/htmlimages/loader.gif) no-repeat center center;background-color:#ffffff;position:absolute;margin:auto;top:0;left:0;right:0;bottom :0;z-index:10010;}</style>
<style>
@media screen and (max-width: 300px) {
#ccClose {
display:none;
</style>
Also you might want to change the max-width to 400 or something. You can test in the broswer and then resizing until you hit the threshhold.

Editing log4j.properties file of ear while deploying ear file.

Hi,
Can i edit log4j.properties file of ear while deploying ear file.
~ Dhiraj.

javainstead:
>>is MyFolder in the root? else you mite wanna try giving the entire path starting from the root
No the "MyFolder" is not in the root. Normally if we give the file name alone, it will store in a directory. Instead of storing in that directory, i want to have create another subfolder under that directory and storing the file in it. This is my need.
OS: Windows 2000.
zakir_sh:
log4j.rootCategory=DEBUG,myproj
log4j.appender.myproj=org.apache.log4j.RollingFileAppender
log4j.appender.myproj.File=/u3/logs/myproj_webapp_logs/dev_region/mylogfile.log......
I gave relative path like this and got the file not found error.
log4j.appender.myproj.File=/MyFolder/error_file.log
Thanks,
Manikandan

Tabular data model: Query keeps timing out when attempting to Edit Table Properties

Tabular data model (SSDT)
Problem: I have a table in tabular data model using a SQL Query for a data source. The query in question requires about 3 minutes to regenerate. When I open Edit Table Properties for this data source the query times out and I get an error (see below): "
Failed to retrieve data from udvTrainJobReportsData. Reason: Query timeout expired"
This seems to happen anytime I use a query that takes longer than a couple of minutes to regenerate. Anyone have an idea on how to get around this. Is there a timeout setting somewhere in tabular data model that can be increased?
Thanks...

Hi ManikantM,
According to your description, you query keeps time out when edit table properties. Right?
In this scenario, this error is thrown when connection or query execution exceeds the time out value. Please try to import this table and then increase the connection time out seconds.
We can increase to ExternalCommandTimeout in Analysis Server Properties. Please refer to link below:
http://aniruddhathengadi.blogspot.in/2012/07/ole-db-error-ole-db-or-odbc-error-query.html
Please also refer to a similar thread below:
https://social.technet.microsoft.com/Forums/office/en-US/3f83a26b-71c6-462e-8b90-2ce2ce0b9465/powerpivots-2010-query-keeps-timing-out-when-attempting-to-edit-table-properties?forum=excel
Best Regards,
Simon Hou
TechNet Community Support

PowerPivots 2010: Query keeps timing out when attempting to Edit Table Properties

Excel PowerPivots Version: PowerPivots for Excel 2010
Problem: I have a table in PowerPivot windows using a SQL Query for a data source. The query in question requires about 3 minutes to regenerate. When I open Edit Table Properties for this data source the query times out
and I get an error (see below): "
Failed to retrieve data from udvTrainJobReportsData. Reason: Query timeout expired"
This seems to happen anytime I use a query that takes longer than a couple of minutes to regenerate. Anyone have an idea on how to get around this. Is there a timeout setting somewhere in PowerPivots that can be increased?
Regards,
....bob
Screen Shot of Error:
Bob Sutor

Hi,
We could add the seconds in the timeout values.
Then, if you want to add the timeout values for the SQL Query, please following the link to do:
http://aniruddhathengadi.blogspot.in/2012/07/ole-db-error-ole-db-or-odbc-error-query.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
And here is a similar issue.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/59dbdd8e-9981-41c5-a02c-9365c46956e1/how-to-extend-the-timeout-for-long-running-queries?forum=sqlkjpowerpivotforexcel
Thanks,
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Can not edit roles properties

Dear All,
I found the solution but for the moment I don't know if it is a bug or not.
In my user if the flag "Activate Accessibility Feature" is set on, I can't edit the properties of all objects (except IViews). The button properties and Edit are greyed.
If I set of the flag, the button are available and I can change all the object.
Have a nice day.
Véronique

Hi,
If some functionality is missing or reported by many users, then you can call it a bug. but this seems to be only for your user. It works for other users of the same portal. So this can't be a bug but would have happened due to some unwanted or unknown actions in portal. SAP Portal is very sensitive as far as I understood. Any wrong configuration or wrong deployment can easily bring a server down. So we have to make sure we are doing right things to the most extent. For your question, you can delete your user, recreate it and check. hope that will work.
Regards,
Harini S

"ant deploy" HTTP 401 - edit build.properties won't help...will you pls?

Hi!
I edited build.properties as it's written in the tutorial and copied it to the right directory but still I get this error:
BUILD FAILED
file:C:/jwsdp-1.2/docs/jwstutorial12/examples/jaxrpc/common/targets.xml:41: java.io.IOException: Server returned HTTP response code: 401 for URL: http://localhost:8080/manager/install?path=%2Fhello-jaxrpc&war=file%3A%24%7Bexample.path%7D%2Fbuild
Please help me.
Thomas

Really appreciate your help in this regard, I got stuck in this problem too. Finally I put username/password in build.xml in
<home>/examples/common/build.properties (Where it suppose to be
Following are the details of it.
tutorial.home=<<home>>
tutorial.install=${tutorial.home}/jwstutorial13
username=admin
password=admin
host=localhost
port=8080
secure.port=8443
url=http://${host}:${port}/manager
Thanks again for the hint

Editing DataSource Properties

Similar Messages

Maybe you are looking for