Editing is terminated message when running batch input error using lsmw

Any Idea why would I get the info message like
"Editing is terminated message when running batch input error using lsmw"
please suggest where to look at.
Thanks,
Edited by: mark_yellow mark on Jul 1, 2008 3:27 AM

Hi Mark,
Welcome.
This is lsmw batch input error.while uploading the G/L accounts using the Batch Input process (program name RFBISA00) in LSMW.this error mainly generates...
Fix the error using logs.
thanks
karthik

Similar Messages

LSMW : error message when ru batch input

Hi,
i want to integrate some FI docs with LSMW, when i run the Batch input i have this error : Choose valid function.
Any idea to solve that.
full points will be assigned.
Regards

Hi Mark,
Welcome.
This is lsmw batch input error.while uploading the G/L accounts using the Batch Input process (program name RFBISA00) in LSMW.this error mainly generates...
Fix the error using logs.
thanks
karthik

Error when running Batch Input session for T code F.05

When I am executing Foreign Currency Revaluation using the T Code F.05, I am unable to post the documents for Foreign Loss or gain, as these GL accounts have been defined as cost Element.
Can any one suggest how to generate postings.
Phani

Hi Phani,
This error could be becuase you have created the P&L gl accounts for forex gain and loss as cost element and you have not done the automatic assignment of cost Center to these GL accounts. Please do the necessary cost center assignment to T Code OKB9. Identify the PL gl accounts related to forex gain and loss and assign cost center.
Hope this solves the problem
Regards
Paul

Problem in running batch input session

Hello Guys i developed a lsmw object .in step 13 after executing create batch inputsession a session is created and i can see the session created but when i go to step 14 run batch input session .i couldnt find session there and eventually can not run session can any body help me please .

Hi priya,
in 13step session is created for test data.
if session is created the message will be display like this " 1 batech input n number of record are created".
if like message will display 14th step automatically run the session ifnot there is problem with in u flat file or miss match with some fileds.
check it corrected than run the u lsmw project.
i think now it will work.
Reward is usefull.
Thank's.
Patil

Error message when running the FSPCCURR - PS/Fin MultiCurrency Process

error message when running the FSPCCURR - PS/Fin MultiCurrency Process
=====================================================
2011-03-21-17.21.39.660000 INFO(5870,1) PI(785156) Program(FSPCGLMC) GL MultiCurrency processing has begun.
2011-03-21-17.21.40.820000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step CURPER in Group NONREVAL for Business Unit NAMER.
2011-03-21-17.30.14.520000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step USD_USD in Group NONREVAL for Business Unit NAMER.
2011-03-21-17.30.53.000000 SEVERE ERROR IN PGM:(5870,58) PI(785156) Program(FSPCPROC) Edit journal fails for Business Unit NAMER and Step USD_USD.

Hi 841037,
We are facing this same issue in our environment. We are on FSCM 9.1 bundle #24.Please let me know how you resolved this issue at your end. Any help or pointers regarding this issue is highly appreciated. Thanks.

LSMW Issue at step -Run Batch Input Session

Dear gurus,
While uploading service master through lSMW while processing the system prompts a message specifying "Buffertable not upto date" at Run Batch Input Session step .So please investigate what is missing/wrong.
Wirth regards,
Raj

I dont think that this has directly something to do with LSMW.
It is more related to the transaction your try to post in the batch input.
Search OSS with the error message number. I had seen some notes for number SE001, but your message is actually twice in the message table, and you did not tell the message number.
If it is message SE001, then you may find programm corrections in OSS.
Otherwise just log out and in again and try, or open a message at OSS yourself if the problem still persists

Receiving Error Message when running sh rep_populate.sh

Following directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html
Receiving Error Message when running sh rep_populate.sh trying to create local yum repositories and configure up2date and yum to install and update packages from them.
THIS PROGRAM IS DEPRECATED!
You should be generating xml metadata instead.
Please see http://linux.duke.edu/metadata
After executing following instructions and replacing server name with our server name.smmj.com
Client Setup
1. Import the GPG key
rpm --import /usr/share/rhn/RPM-GPG-KEY
2. Configure up2date to use the yum repository. Edit /etc/sysconfig/rhn/sources. Comment out line
up2date default
to
#up2date default
and add the following lines. Replace <repository_server> with the hostname of the machine that is hosting the yum repository. Comment and uncomment individual repositories as needed.
Enterprise Linux 5
(commented uncommented)yum el5_$ARCH_latest http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$ARCH/
(commented uncommented)yum el5_$ARCH_addons http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$ARCH/
#yum el5_$ARCH_oracle http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$ARCH/
#yum el5_ga_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$ARCH/
#yum el5_u1_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$ARCH/
#yum el5_u2_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$ARCH/
#yum el5_u3_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$ARCH/
#yum el5_ga_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$ARCH/
#yum el5_u1_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$ARCH/
#yum el5_u2_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$ARCH/
#yum el5_u3_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$ARCH/
and running additional instructions
2. Run up2date to install python-urlgrabber.
up2date -i python-urlgrabber
Receiving following error
There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
Further when trying to replace /etc/yum.repos.d/ULN-Base.repo ULN-Base.repo unable to find file, file that is there
is called public-yum-el5.repo
Made following changes in that file
Enterprise Linux 5
[el5_latest]
name=Enterprise Linux $releasever - $basearch - latest
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$basearch/
gpgcheck=1
enabled=1
[el5_addons]
name=Enterprise Linux $releasever - $basearch - addons
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$basearch/
gpgcheck=1
enabled=0
[el5_oracle]
name=Enterprise Linux $releasever - $basearch - oracle
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$basearch/
gpgcheck=1
enabled=0
[el5_ga_base]
name=Enterprise Linux $releasever GA - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$basearch/
gpgcheck=1
enabled=0
[el5_u1_base]
name=Enterprise Linux $releasever U1 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$basearch/
gpgcheck=1
enabled=0
[el5_u2_base]
name=Enterprise Linux $releasever U2 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$basearch/
gpgcheck=1
enabled=0
[el5_u3_base]
name=Enterprise Linux $releasever U3 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$basearch/
gpgcheck=1
enabled=0
[el5_ga_patch]
name=Enterprise Linux $releasever GA - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u1_patch]
name=Enterprise Linux $releasever U1 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u2_patch]
name=Enterprise Linux $releasever U2 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u3_patch]
name=Enterprise Linux $releasever U3 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$basearch/
gpgcheck=1
enabled=0
Then ran following commands
up2date -u
Output
There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
yum update
http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/addons/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror.
http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/latest/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: el5_latest. Please verify its path and try again
We would like a simple and correct way of doing this or we will be forced to switch to another os and another provider
Thanks, for your help

We purchased Licensed version of Red Hat Linux Oracle for our network server. My boss wanted a simple way of installing Samba on it so that the server can be used for file and printer sharing. We have an active directory on our network and couple of other Windows servers as well as other Red Hat servers. He wants to install Samba on that licensed version so that it can primarily be used for file storage and sharing, he wants to be able to connect with gui type interface to this server from windows machines and linux machines and he wants for this Red Hat Linux Oracle machine to show up in active directory.
Aparently when we went to Applications, Add Remove Software in Red Hat Fedora Samba was not in there.
When we go to System, Administration, Server Settings, Services, Samba is also not there.
Nowhere can we find an easy way of installing samba on this Linux OS.
I went to your site, signed in, (previously there was only 1 channel available there, I have just recently found and added all the channels that were aplicable to our system) and downloading them now to another version of the same type of Licensed Red Hat Linux Oracle. Hopefully when I use Software Updater in System Tools it will load the packages we are loking for (from the channels I selected on your website). Once that is done I think I could just go to add remove software and install the packages that I need from there.
I am still not sure why I set out to install repositories on this version of Linux, perhaps I mistakenly thought that once everything is installed (according to directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html) on the machine in question I would be able to use that same machine to get the packages for that same machine. We were in such a rush and desperate to put the server on to the network it did not dawn on me that this scenario is designed to have one serve on the network that holds repositories and other machines connect to it for packages.
I think I am on the right track in my logic, log in to your site with the CSI number, user name and password, select ALL the channels versus only one, save the search, then from the machine update packages, then add new software and Samba Should be in there. I would like to hear your thoughts on this.
This version of Linux seem like a very reliable version of OS and I would hate to give up on it, especially since we already bought licenses for it, its just that we don't have that much experience with it and I would upreciate all the info that you can give us for it. I am sure that everyone at SMMJ will upreciate you for it.

Error Message when running BI Publisher

Hi-
Getting the following error message when running a custom report, report has been defined but still getting the error message in HCM 9.2 with PeopleTools 8.53
Template definition MAC_CONF_STM not found in the report definition. (235,2012) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplate PCPC:15048 Statement:325
Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplateRuntime Statement:1778
Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport Statement:1115
Called from:BA_VALIDATION.ConfirmStmtPrint.OnExecute Name:PrintConfirmStmt Statement:53
Called from:W3EB_ENR_SUMMARY.GBL.W3EB_ENR_PB_WRK.ODEM_CONF_STMT_PB.FieldChange Statement:2
Any idea regarding the error message
Regards,
MACD

Did your custom report ever ran successfully in the environment you are getting the error.
Most of the time not all the report definition and associated definitions are migrated to the next environment.
Have a look at following doc:
E-BI/XMLP: How To Migrate BI/XML Publisher File Definition Objects? (Doc ID 659919.1)

Error message when running form

hi everybody,
im getting this error message when running a simple form.
Positional Parameter after key command line.
Can anyone please help.
thnk u

Check the path to your form. Forms does not like spaces in the path or fmx filename, but the error doesn't explain the problem at all!

Messages in a batch input session

Hi,
I would like to catch the messages of a batch input session in order to inform user of clearing itens posted and not posted.
So i thought that SX_MESSAGE_TEXT_BUILD would work fine. Somebody can give an example of this kind of code.
Of course if you know another mean of solve the problem i will appreciate that.
           Best Regards
                João Fernandes

Hi,
loop at i_yerrlog into wa_yerrlog.
    v_msg_id = wa_yerrlog-msgid.
    v_msg_no = wa_yerrlog-msgnr.
    v_msg_var1 = wa_yerrlog-msgv1.
    v_msg_var2 = wa_yerrlog-msgv2.
    v_msg_var3 = wa_yerrlog-msgv3.
    v_msg_var4 = wa_yerrlog-msgv4.
* Creating message text
    call function 'MESSAGE_PREPARE'
      exporting
        msg_id   = v_msg_id
        msg_no   = v_msg_no
        msg_var1 = v_msg_var1
        msg_var2 = v_msg_var2
        msg_var3 = v_msg_var3
        msg_var4 = v_msg_var4
      importing
        msg_text = v_text1.
    move-corresponding wa_yerrlog to wa_output2.
    move v_text1 to wa_output2-mstxt.
    append wa_output2 to i_output2.
endloop.
aRs

In which tables are batch input error messages logged?

does anybody know in which table are the batch input error messages logged?
I have to display the error messages which have occured during the transaction
I tried to find out, but i could see only the table BDCMSGCOLL, this table has only the Batch input message number and not the message itself?
does anybody know about the batch input error messages?

hi,
check the sample code below.
messtab is of type BDCMSGCOLL.
Call the transaction and then use T100 to get the message.
DATA: l_mstring(480).
call transaction using
REFRESH messtab.
CALL TRANSACTION tcode USING bdcdata
                   MODE   ctumode
                   UPDATE cupdate
                   MESSAGES INTO messtab.
l_subrc = sy-subrc.
SKIP.
LOOP AT messtab.
    SELECT SINGLE * FROM t100 WHERE sprsl = messtab-msgspra
                              AND   arbgb = messtab-msgid
                              AND   msgnr = messtab-msgnr.
    IF sy-subrc = 0.
      l_mstring = t100-text.
      IF l_mstring CS '&1'.
        REPLACE '&1' WITH messtab-msgv1 INTO l_mstring.
        REPLACE '&2' WITH messtab-msgv2 INTO l_mstring.
        REPLACE '&3' WITH messtab-msgv3 INTO l_mstring.
        REPLACE '&4' WITH messtab-msgv4 INTO l_mstring.
      ELSE.
        REPLACE '&' WITH messtab-msgv1 INTO l_mstring.
        REPLACE '&' WITH messtab-msgv2 INTO l_mstring.
        REPLACE '&' WITH messtab-msgv3 INTO l_mstring.
        REPLACE '&' WITH messtab-msgv4 INTO l_mstring.
      ENDIF.
      CONDENSE l_mstring.
      WRITE: /4 messtab-msgtyp, l_mstring(250).
    ELSE.
      WRITE: /4 messtab.
    ENDIF.
ENDLOOP.

I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

Try Here > http://pondini.org/TM/C12.html
More Info here > http://pondini.org/TM/Time_Capsule.html

Error message when running Transaction Code = ME84

hi,
i am getting an error message when running Transaction Code = ME84
Error is 'No processing (error message P5 017), No data for chosen selection'
can someone please guide me on this ?

Hi Mahendra,
There are several reasons for the release not happeneing.
1. The issue could be in the selection of release type
2. Scope of selection
3. Strategy profile
Please check whether the selection parameters are considered are right for release to happen.
Regards,
Harish

Error while creating a product group--Batch input error 9

Hi,
While creating a product group in T-code MC84, getting the error message" Product group can not be created (Batch input error 9)". Would appreciate providing yr help to resolve above issue.
Thks,
Nilesh

Hi Neel,
As ponited by you, the material type "PROD" is realted with creation of product group.I am able to resolve the error, "actually the work schedulling & MRP views were not activated for "PROD" resulting in the above error.
Thks for yr help.
Regards,
Nilesh

Getting error message when trying to display error messages on a ProfilePage

Hi All,
I'm getting following error message when trying to display error on a Profile page.
On page i'm seeing this:
     org.apache.jasper.JasperException: java.lang.IllegalStateException: getOutputStream() has already been called for this response
          org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:515)
          org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:405)
In condole, i'm seeing this:
     18:23:00,206 ERROR [[jsp]] Servlet.service() for servlet jsp threw exception
          java.lang.IllegalStateException: getOutputStream() has already been called for this response
             at org.apache.catalina.connector.Response.getWriter(Response.java:621)
             at org.apache.catalina.connector.ResponseFacade.getWriter(ResponseFacade.java:198)
Please let me know what could be the reason.
Thanks,
Vishnu

HI David And Nitin,
Here is the code using which i'm trying to display the error messages on registration page, but this code fragment is outside registration form will that cause any problem?
<dsp:droplet name="Switch">
<dsp:param name="value" bean="ProfileFormHandler.formError"/>
<dsp:oparam name="true">
<table>
<dsp:droplet name="ProfileErrorMessageForEach">
<dsp:param name="exceptions" bean="ProfileFormHandler.formExceptions"/>
<dsp:oparam name="output">
<tr style="color: red">
<td><dsp:valueof param="message"></dsp:valueof></td>
</tr>
</dsp:oparam>
</dsp:droplet>
</table>
</dsp:oparam>
</dsp:droplet>
Thanks,
Vishnu

Editing is terminated message when running batch input error using lsmw

Similar Messages

Maybe you are looking for