Editing Multiple Audio Clips From Premiere in Audition

Hi there,
I am working with video/audio in Premiere that has frequent cuts (although the audio is derived from two files) and I need to edit all the audio files at once, rather than one by one, in Audition. I was hoping to this by nesting the audio in Premiere but I am not able to edit the nested file in Audition after this.
If anyone has any ideas of how to work with and apply the same properties to multiple audio clips from Premiere in Audition I would greatly appreciate it.
Thanks...

Hi everyone, I also have a trouble with cs6. I just record 3 tracks in the early today, then when I got home, I saved as sexs file ( wrong decision). After that, I went back and try to open the file, it can't file the recording tracks. The only one thing still exist is my beat, what should I do to recovered it? thanks for helping me out of this.

Similar Messages

Exporting multiple audio channels from Premiere Pro CS6 in MXF OP1a

I have a Premiere Pro project with multiple audio channels and I want to export them as individual channels in a MXF-file.
Method:
When I created a new sequence I choose "Multichannel" from the "Tracks" page. When I export the MXF OP1a, I choose 8 channels from the "Audio" page. I make sure that none of the channels are muted.
Result:
The rendered file contains 8 channels as I want it to, but only the first two channels contains audio (main left + right), the rest of the channels are empty. Channel 1 and 2 contains the audio from all channels, but I want the channels to be seperated in the same way as they are layered in Premiere.
Any ideas what I can do?
Thank you for your help!

Hey Guys,
I'm having problems exporting an 8 channel audio mxf for a broadcast client. The mix they want is as follows:
Track 01: Full Programme Mix L
Track 02: Full Programme Mix R
Track 03: International Sound L
Track 04: International Sound R
Track 05: Music and Effects L
Track 06: Music and Effects R
Track 07: VO Mono
Track 08: Interview Mono
I have setup the sequence following this video on vimeo and am fairly confident I have the sequence settings correct. https://vimeo.com/38501157
I also can export a multichannel mxf. But all my tracks are exported as mono and I am therefore not maintaining my L and R as set up in my sequence
The problem is on exporting that since Tracks 01 and 02 are bounced down to 1 + 2 it means that my Track 01 (Panned L) is getting bounced down onto my Track 02 aswell and thus it does not remain seperate. Has anyone delivered a similar format for a broadcaster and come across this problem with Premiere Pro and know a solution?
Any help would be much appreciated
Thanks
Eamonn

How to Delete several Audio clips from Video clips on Timeline of APPro CS5

I would like to know how to delete multiple audio clips from Video clips at once in time line in APPro CS5? Please advice step-by-step procedure. I can DELETE audio from a single Video clip. But I wanted to DEL Audio from multiple video clips. Your help is much appreciated. Thanks

Thanks for the advice given by Shooternz, Colin and Jim. Your help is much appreciated for a beginner like me... Jim's idea was also good..It worked for me and also safe if I need to use the original audio. Following method also found good...but previous audio clip cannot be extracted after deleting it. ... 1. Hold down "ALT" key first then select the first audio clip in the chain of video clips to Delete. 2. Hold down " Shift + Alt " keys together and click right mouse button on all audio clips to be deleted one by one. Make sure only audio clips are selected. 3. Then release ALT+Shift keys and then click right mouse button and select "Clear" from pull down menu to Delete all selected audio clips on the time line. This method works very well for me. Thanks for every one who has adviced me how to do it. Thanks guys... If u all find better method tha above...please inform us. Thx.

Premier Pro 2014 opens Audition CS6 when editing audio clip from Premier

I own Adobe CS6 Master Collection installed (for legacy projects) and I also have the CC subscription. When I am running Premier Pro CC 2014 and then try to edit an audio clip in Audition the CS6 version of Audition loads rather than the CC 2014 version. Any help or thoughts on why this is happening would be appreciated.
KR

I detected this with photoshop--I think its an OS issue--The OS doesn't appear to recognize the two versions are different. In my case, I had PSP CC loaded, but then loaded the 32 bit version of PSP CS6 (so I could scan directly into the program using "IMPORT") Windows changed the default to the 32 bit version. When I tried to change default using windows, windows would not show the CC version as an option--just the 32 bit version. Without editing the registry, I couldn't find a way to force windows to ignore the 32 bit version and open the CC version. My workaround was to always open the CC version from the icon and then click on the file I wanted open. It appears that if any version of the program is already running, the recognized default won't open. This might work for you on Audition.

I just loaded Audition, but when I try to edit an audio track from Captivate the "edit in adobe audi

I just loaded Audition, and already had Captivate on my computer. I'm trying to edit an audio track from Captivate, so I go to Audio>Edit>Slide. But, the window that comes up does not have the "Edit in Audition" button activated. The button is faint, thus doesn't work. How do I sync these two programs so I can edit a Captivate Audio file in Audition?

From the captivate help file:
You can use Adobe Audition to edit audio when you want to go beyond the audio editing options available in Adobe Captivate. For example, to apply filters or remove noise, you need an advanced audio editor such as Adobe Audition. You can either edit the audio files from slides or batch process by opening multiple files in Adobe Audition using the Library panel.
The changes reflect in Adobe Captivate library and the associated slides where the audio files are being used. The saved files are reimported to Adobe Captivate with the slide associations intact.
Note: This feature is available only in Adobe Captivate that is installed as a part of Adobe eLearning Suite.
I think that the last line probably answers your question....

Drag & drop audio clip from timeline to project window ?

i no longer can drag a clip from timeline to the project window & then breakout the clip to mono by selecting clip - audio options- breakout to mono - now when i drop an audio clip from timeline into the project window it does not show up anywhere in the project window - did an update get rid of this function ? it was much better than having to go back to the unedited original source & start from scratch ...

thanx for your time Jim - i understand that would be the preferred method but that was a quick fix until recently i have noticed that i can no longer do it by just grabbing the edited clip & drop it in project window so that i can modify just that portion of the original files properties - it still functions that way on a friends machine - was just kinda weird that i can't get it to work that way any more …

Export video clip from Premiere into an existing Encore project

New to encore.....love the software so far....but not much experience with it yet. Here is my question:
How do I go about exporting a video clip from premiere CS3 into an open/existing encore project. When I try to export to encore from the prem. timeline it makes a new proj. Sometimes I want to render out and export more than one asset into the same encore proj. but cant seem to figure out how to do that. any help would be great.
Thanks,
Eric

thanks J.....I have been doing it all along the way that you suggested. Just wondered if there might be a more efficient way to bring in multiple files. I appreciate your help with this....now at least I know that I am not doing things in a more difficult manner than necessary.
Thanks again!
~Eric

How to link multiple audio clip to one video?

I have multiple audio clips in the timeline but I can't link them all to a video in the timeline.
The "Clip" -> "Link" option is only enabled if I select a single audio clip.
Video:
http://www.bartelsmedia.com/vid/tmp_premiere_question4.swf
Could anybody help, please?

See
Group clips in the Premiere Pro Help.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

How do I stop background audio clips from playing while browsing sites?

Firefox is my default browser. I use Google chrome and Internet explorer sessions for background monitoring news site sessions at the same time. I have no problem with the other two browsers. While surfing with Firefox I get unwanted background audio clips that start and run by themselves. I cannot stop them. They run and then stop by their self. They are some sort of adware and I cannot find the source to remove them. I also get video clips sometimes that I can stop that run around the outside of the active window I am viewing. These is very annoying. I have uninstalled Firefox and reinstalled it but the problem does not go away. I antivirus software, registry change protection software, and registry cleaning software. The problem is with the default browser.
How can I locate and remove the plugin, addin or service that starts this annoying activity. I have no special unwanted toolbars installed. There is nothing in the installed programs list in the control that shouldn't be there.

I had a similar problem to this. EVERYTIME i started firefox, it would play an audio clip from a flash game i played a while ago, it would last 5 minutes before finishing. i tried the starting in safe mode, but that didn't work for me, so after that i then tried RESETTING firefox, and that has worked for me.
On another side of startup problems, firefox would also open up a new tab on startup, usually 22find.com or do-search.com. i know these are caused by a virus and have since deleted it, but it had changed a preference file in firefox causing it to continue to open on startup.
Having since done the firefox reset, i haven't had either of these problems AT ALL! would recommend this as a possible fix for you friend before trying any lengthy troubleshooting process or downloading any extra anti-virus removal software.
here's the like to showing you how to reset firefox: https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems

Facebook has challenged the copyright of a movie using iMovie audio. Am i allowed to share movies made using audio clips from iMovie?, Facebook has challenged the copyright of a movie using iMovie audio

Facebook has challenged the copyright of a movie using iMovie audio. Am i allowed to share movies made using audio clips from iMovie?

Just curious as to why it's coming up as a copyright violation?
Hard to say. I think FaceBook errs on the side of abundance caution when they detect anything that sounds like music.
It's also possible to that people use samples of various pieces of iLife audio contest to create a piece of work that they then copyright.
Matt

Udio to my clip. When I bring it over it highlights the entire clip as opposed to adding it above or below. Then I can't edit the audio clip. HELP!!

Trying to add audio to my clip. When I bring it over it highlights the entire clip as opposed to adding it above or below. Then I can't edit the audio clip. HELP!!

Just discovered this nifty little bug myself today. Boy, Leopard is really bug city, I'm definitely regretting the upgrade. I was glad to find the 'show in mailbox' trick, although then once I went to re-send the message, it duplicated it for some reason and sent it twice, so now my business contact thinks I'm a moron because I sent him this super large attachment TWICE thanks to moronic Mail.app.
Another interesting thing though, is that after finding the email via 'show in mailbox' and opening it, it actually displayed the MP3 attachment as the old Tiger quicktime player (w/progress bar) as opposed to when I first composed the message and it would only display it as an icon. I thought they had just removed that feature for some reason, but nope! Another bug!

How do I join multiple (short) audio clips into one single long audio clip in Premiere Pro CS5?

Hello,
The question is in the title but I'm wondering how I can join multiple (short) audio clips into one single long audio clip in PP CS5.5. I put all my short clips right next to each other and selected all of them to see what options are available by right clicking and using the toolbar options at the top. The closest that I got was to nest the sequence, but that's not what I really want.
I'd like to merge all the short clips into one single (long) audio file to use under the video.
Thoughts are welcome and greatly appreciated.
Thanks,
-Melvin

O.K. This is kind of fundamental and you will need to learn up on this fully ...but for now...
Make sure you have the WAB ( work area bar )covering the length of the audio clips. ( You do not need to select them)
Go to the File Menu> Export Media
You will be given all the Export Options. Choose Wave File
Select option for Export Work Area.
Choose where to export the file to ( HD location)
follow your nose from there....
http://tv.adobe.com/watch/learn-premiere-pro-cs5/exporting-with-adobe-media-encoder/
BTW - Why are you taking the audio to Audition anyway? What are you going to do to it.

No three point edit with merged clips in Premiere Pro CC 7.2?

Hello Premiere Folk,
I've recently, as of last night, updated to Premiere Pro CC 7.2. I'm currently cutting a feature using merged 5K red raw clips. We were expereicning some weird things but were able to work around them. The update fixed to major problems we were having;
1. Bloating projects going from 808kb to 5mb for no reason.
2. Not being able to perform a match frame on merged clips.
The update fixed these issues, but don't throw on your party hats just yet. Within this update a fuction CRUCIAL to any editor has been taken away after you've performed a merged clip function... THE EDIT! Any time I make an in and out point in my source with a merged clip and an in and out in my timeline and try to do an insert edit via a hotkey, it just edits the entire clip in the timeline starting with a radnom in point! I was able to set an in and out in my source and just edit into the timeline but even that function has been taken away. Adobe please fix this! Yes the match frame with a merged clip works but dont take away editing basics!

This bug is NOT FULLY FIXED. I'm on a tight deadline so i'm not looking very hard online to see if i'm alone - so please forgive me for just posting here...
I'm using CC7.2.1 it's 1/21... very grateful that match frame FINALLY works on merged clips, but, again, this insert/overwrite bug is only PARTIALLY FIXED.
Insert/overwrite with merged clips on 3-point edit now works, but ONLY when cutting in BOTH merged video+audio... if you're just trying to cut in the audio from a merged clip using a 3-point/4-point edit via hotkey, it's a no-go.
I, for example, needed to re-cut in audio under some video with effects on it. So, I unpatched the video source completely and patched source audio tracks 1-4 to the appropriate sequence tracks. Upon hitting insert or overwrite multiple times, nothing responds. The only way to cut anything in from the source (merged clip) was to patch the source video back into the timeline on an unused video track, then cut ALL the tracks from the source in, I then had to delete the video track re-link the now free audio to the original video. Not a big deal, but annoying enough & waste of precious time on tight deadline.
So, yeah, I have a workaround but is still not appropriate to have a core function not work properly. Especially when I'm working with a very complicated timeline.
That said, thanks for keeping on top of our gripes, Mark.

How do I sync multiple audio clips to one video clip?

I have video (with stereo audio from a camera mic), and for each take, there are also four additional mono audio tracks that line up with it. It was footage shot outdoors in the city, so I guess the filmmakers just wanted to have as many options for sound mixing as possible given how much background noise there would be. I have tried selecting the video clip and the four audio clips at once and selecting "synchronize clips," but it doesn't work. It spits out a synchronized clip that seems to have converted two of the mono tracks into one stereo track... and then disregarded the remaining two mono tracks. It's a mess. It's likely someone else will fine tune the audio once I'm done cutting the video together... but I'd like to get all the audio tracks properly synced from the start. Thanks for any help you can offer.

Do you mean manual syncing? I've been reading this thread about workaround, which aren't working for me: http://forums.creativecow.net/thread/344/21236
But the question they are asking is the same one I am asking. Isn't this a typical situation, having multiple mics for one camera? For example, if someone filmed a concert with one camera but used both the camera audio, and ambient mic, and a mix from the board, then that would be 3 audio tracks with 1 video track. I'm in a similar situation, and I'm finding it hard to believe that FCPX isn't equipped to edit this way. There must be some way to get one video clip (with reference audio) to sync with four audio tracks.

How do I merge multiple audio clips to one?

Hey Everyone,
After syncing multiple clips in PE I import them into Premiere CS6 and they are all layered with their own audio tracks (though the video clips are synced with only one audio track). This causes inconsistent audio levels. How do I join all these clips which originally derived from one audio recorder to merge as one? If there is a step by step process please advise. Thanks in advance, you guys are beyond awesome.
Mike Diaz

If all audio is from a single audio source (with consistent levels0 ..the only reason you would be getting different audio levels on different audio tracks is if the Mixer has different settings....or the audio has been changed at clip level.
Its usually desireable to have audio clips on different tracks.
Can you not just drag the audio clips to a single audio track...if that's what you really need?
Alternatively a mixdown...but that requires sorting the levels anyway. ( Mixer on automation or at clip level.)

Editing Multiple Audio Clips From Premiere in Audition

Similar Messages

Maybe you are looking for