Editor not working correctly in photomerge

Trying to merge three pics, and at end get above message windows to close.. help please

Tab works for me too. Enter does not. SAPGUI 7.10 patch 19.
But there appears to be several areas to look for changes:
1) Tweak SAP GUI
2) In the bottom right corner of the editor, there's a small icon that looks like a page. Press it, and a new screen will open.
Select "Keyboard", and scroll down to Edit.Autocomplete and experiment with settings.
3) Change an xml setting by editing file (depending on operating system):
    a) c:\Documents and Settings\[user]\SapWorkDir\ab4_data\settings.xml.
    b) look for the section "Code_Completion"
    c) change value from 0 to 1 in 1{/CodeHintAgreeByReturn}
Hope one of these helps.

Similar Messages

The intellisence fuctionality in ABAP editor not working correctly

I have an issue getting the intellisence to work correctly. It will sense the word and show it but when I hit enter for it to copy it just goes to the next line. I tried changing the keyboard settings but htis doens't do anything either.

Tab works for me too. Enter does not. SAPGUI 7.10 patch 19.
But there appears to be several areas to look for changes:
1) Tweak SAP GUI
2) In the bottom right corner of the editor, there's a small icon that looks like a page. Press it, and a new screen will open.
Select "Keyboard", and scroll down to Edit.Autocomplete and experiment with settings.
3) Change an xml setting by editing file (depending on operating system):
    a) c:\Documents and Settings\[user]\SapWorkDir\ab4_data\settings.xml.
    b) look for the section "Code_Completion"
    c) change value from 0 to 1 in 1{/CodeHintAgreeByReturn}
Hope one of these helps.

10g Text Item Editor Not Working Correctly

We're having problems with the Text Item Editor in both Add and Edit modes, but esp. in Edit mode. The problems range from getting a gray text screen (no toolbar); getting a white editor screen (no toolbar); tools that do not load (e.g. font color); and tools that do not work even though everything else seems fine. Sometimes refreshing the screen works but not always. Our users are getting very frustrated continually refreshing and logging out/in. It's become worse in the past few weeks such that it occurs in nearly every instance when editing a text item.
Can anyone point us in a possilbe direction? We are using IE 6.0 and above as the browser.

Kristin -
This sounds like a bug that should be handled through Oracle Support.
Regards,
Candace

SCRIPT/TRIGGER editor not working correctly - red box - codearea.htc

Hello,
I have installed HTMLDB on my computer, and everything works fine, except when I try to edit or create a procedure, script, or trigger, instead of the blue box which allows edit happening it is instead a red box. This box cannot be edited. When trying to compile code already uploaded, a javascript error is produced: Length value is null.
Please help me. I think that I might have a problem with the type of editor( codearea.htc)

You will need to setup the MIME types properly in your HTTP server configuration. Please take a look into the Oracle HTML DB Installation guide / chapter 4: Oracle HTML DB post-installation tasks.
Hope this helps,
Regards,
Marc

Three Point Edit not working correctly :(

Hi there,
first of all I'd like to say thank you Adobe for listening to your users. And I hope this one gets noticed right away....:
It appears that 3 point editing ist not working correctly.
Right now I'm editing a video and I heavily rely on 3 point editing.
I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
Coming from tape workflows I really don't like clicking clip after clip...I need to edit
Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
As soon as I want to use my source sequence with its individual tracks and hit (.) or (,) just nothing happens. Hmpf!
Come on guys, that is essential editing stuff, not fancy speech detection blabla...sorry but this is mega-annoying right now....
It says "Pro" right after "Premiere". So please make it pro! Professionals need ROCK SOLID essential functions.
Make us editors happy having switched from Avid/FCP etc.
Make essential stuff rock solid. That's what makes an app "pro".
Cheers and please mind my harsh words. Just a little upset right now. (I know that's not pro either )

bmfm_ wrote:
I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
Hi bmfm,
I think I know what's going on. The behavior you describe happens when you try to edit back into your original sequence. Can try making a new sequence to cut your selects into? See the page in help for details: http://helpx.adobe.com/premiere-pro/using/edit-sequences-loaded-source-monitor.html
Thanks,
Kevin

Graphical editor not working

Hi,
SAP Graphical editor not working. I am getting the following error.
EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Last week its sucessfully working but suddenly happen this issue... This problem in development server only. In production server is sucessfully working.
Please advise...
Regards
Rajesh.

Hi Rajesh,
It looks to be RFC connection issue.
Refer to various solutions described in below SAP note
101971 - 37527 Graphical full screen is not available (RFC)
Alternative
Workaround
You can prevent the termination of the RFC connection by increasing the value of the timeout parameter for the relevant RFC destination. Call transaction SM59, choose the TCP/IP connection "EU_SCRP_WN32" and branch to the "Special Options" tab page. In the section "Keep-Alive-Timeout" select the option "Specify Timeout" and enter a longer wait time (for example, 300 seconds). Undo this change once you use the corrected program version.
Hope this helps.
Regards,
Deepak Kori

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

If statement within a view is not working correctly ?

Hi all,
maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if not isframe is initial. %>
<htmlb:content design="design2003">
     <htmlb:page title = "Top Level Navigation view">
<% endif. %>
hallo world
<% if not isframe is initial. %>
     </htmlb:page>
</htmlb:content>
<% endif. %>
thanks in advance and best regards
Matthias Hlubek

Matthias,
The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if isframe is <b>NOT</b> initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
    hallo world
</htmlb:page>
</htmlb:content>
<% else. %>
hallo world
<% endif. %>
So why does your example not work? Let us start with a simple tag:
<htmlb:page title = "Top Level Navigation view">
</htmlb:page>
Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
ENDIF.
tag->DO_AT_END( ).
You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
<% if isframe is NOT initial. %>
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
<% if isframe is NOT initial. %>
</htmlb:page>
<% endif. %>
And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
if isframe is NOT initial.
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
endif.
if isframe is NOT initial.
ENDIF.
tag->DO_AT_END( ).
endif.
You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
brian

** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

Hi Friends,
We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY.
We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
lw_fieldcat-lzero = space.
lw_fieldcat-no_zero = 'X'.
After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
We are using SAP ECC 6.0.
Friends, can you clarify the about doubts. It is surprising for me.
Kind regards,
Jegathees P.
Our customer is asked to remove the leading zeros for the numeric field

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

Key Figure calculation in Abap is not working correctly - Overlooping

Hi,
I wrote a logic to calculate the ratio of key figure but it is not working correctly
For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
Sample
A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 = 200
PRODUCT3 0.7 = 1000 * 0.7 = 700
The total amount of this new products is 1000.
Now my logic is working this way.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
Logic used
DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
DATA: amount LIKE data_package-netamount.
DATA: zidx LIKE sy-tabix.
REFRESH t_data.
LOOP AT data_package.
zidx = sy-tabix.
MOVE-CORRESPONDING data_package TO t_data.
REFRESH t_newdso.
SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
data_package-prod.
SORT t_newdso BY prod.
*LOOP AT T_NEWDSO.
READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
IF sy-subrc EQ 0.
    LOOP AT t_newdso.
      t_data-prod = t_newdso-/bic/znew_mp.
      t_data-material = t_newdso-material.
*T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
      APPEND t_data.
    ENDLOOP.
ELSE.
    REFRESH t_olddso.
    SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
    data_package-prod.
    SORT t_olddso BY prod.
    READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
    t_data-prod = t_olddso-prod.
    t_data-material = t_olddso-material.
    APPEND t_data.
ENDIF.
MODIFY data_package INDEX zidx.
ENDLOOP.
REFRESH data_package.
data_package[] = t_data[].
thanks
Edited by: Matt on Sep 27, 2010 2:25 PM - added tags

Hi,
I am not really good at debugging Abap code since I am a newbie. however I have tried to add CLEAR T_DATA before the first loop.
REFRESH T_DATA.
LOOP AT DATA_PACKAGE.
ZIDX = SY-TABIX.
MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
and before the second loop and select statement and at the end of the loop.
REFRESH T_NEWDSO.
SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
DATA_PACKAGE-PROD.
SORT T_NEWDSO BY PROD.
READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
IF sy-subrc EQ 0.
LOOP AT T_NEWDSO.
but then not all data are being fetched.
thanks
Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM

Email pushing not working correctly for office email - 3 seperate devices/carriers

We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
User 4 is on the older nextel blackberry push to talk, and is not on outlook.
We do not have an exchange server. Our emails were all set up through our devices.
Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
Thank you in advance for any suggestions.
Caitlin Talbot

Potential solution for windows for a side-by-side install. This works for me.
To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
+ Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox 4\firefox.exe
+ Open profile manager. Start > Run : firefox.exe -ProfileManager
+ In profile manager create Two Profiles.
firefox3.6
firefox4
+ In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
+ Create two windows shortcuts.
* General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
* General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
That's it. Links from external programs should now open in your default browser.
Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile]

I bought an IPAD air from state and the screen is not working correctly and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
Egypt authorised service providers : https://locate.apple.com/eg/en/

SSRS 2008 R2/SSRS 2012 Tab Delimited setup is not working correctly in Report Designer

I have changed a RSReportDesigner.config to add a tab delimited option for report export, but it is not working correctly in vs2008/vs2010 report designer. I get a duplicate of CSV (comma delimited) in the export dropdown list.
I have tested SSRS 2008 R2/SSRS 2012 on Windows 7 64 bit professional.
It is working correctly in the report manager.
<Extension Name="TAB" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
       <OverrideNames>
           <Name Language="en-US">TAB delimited</Name>
       </OverrideNames>
       <Configuration>
           <DeviceInfo>
               <FieldDelimiter xml:space="preserve">	</FieldDelimiter>
               <Encoding>ASCII</Encoding>
               <UseFormattedValues>False</UseFormattedValues>
               <NoHeader>False</NoHeader>
               <FileExtension>TXT</FileExtension>
           </DeviceInfo>
       </Configuration>
      </Extension>

Hi Dave0323,
According to your description, you want to export your report into TXT file and change the delimiter to be a Tab. Right?
In Reporting Services, when exporting to a CSV file, we can change the default field delimiter to any character that we want, including TAB, by changing the device information settings in the configuration file. For example, to use TAB,
update the FieldDelimiter setting to <FieldDelimiter xml:space="preserve">[TAB]</FieldDelimiter>. And we can change the FileExtension to be TXT if we want to export it into a TXT file. So in this scenario, we just need to modify the configuration
file like below:
The result looks like below:
Reference:
CSV Device Information Settings
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Text formatting in Numbers is not working correctly.

In Numbers on Chrome text formatting is not working correctly, it's almost as if a CSS file is not being loaded. To be precise, when I try to make a cell Bold there is no bolding. I am using Arial as a font. This has been an issue on Mac and Windows. Any ideas?

Do you have the same problem with Safari or Firefox?

1st Gen iPod touch not working correctly?

I have a 1st generation 8GB iPod Touch. It's not working correctly.
My biggest problem is that, unexplaiably, certain areas of the screen don't seem to register touch anymore. There is a sort of "L" shape on the left and bottom edges of the screen that won't register touch, making it impossible to move applications to the previous page on the home screen and making it hard to use the keyboard/buttons while in portrait mode. It's extremely frustrating to try to change the volume while playing a song, as I now have to either put the iPod in sleep mode then double tap the home button or flip it to cover flow and double tap the home button to do it.
http://i38.photobucket.com/albums/e140/Vipershark/IMG_0001.png
(Highlight the image to see it better.)
This is a screenshot of the working/non-working areas that I made using the Whiteboard application. The white area that you see (excluding the little half circles of black which are extended brush strokes and not actually working areas) is the area that doesn't work. I can't seem to figure out why it happened, as I've never dropped or otherwise damaged it. It just happened one day, and I don't know why.
But I can't fix it. I've tried everything. Upgrading (I'm now running iPhone OS 3.0 which still didn't fix the problem.) didn't work, restoring didn't work, deleting everything and restoring from factory settings didn't work.
I'm also having a few other problems as well, though they're not as bad. My home button seems to stop working sometimes and sometimes the entire screen witll stop registering touch until I put the iPod to sleep and turn it back on. It also seems to go a lot slower than usual.
My iPod is less than a year old. Can you help?

Vipershark,
I had a very similar problem this past weekend with my 1G 8GB iPod touch. But with me, just the left side of the screen wasn't registering my touch. I could still access the bottom section, which you cannot.
The good news for me is that I fixed it and I hope it works for you as well. What fixed it for me was resetting all my settings. To do this, go to the settings icon, then click on general, and then on the very bottom is reset. Choose "reset all settings."
Apparently this is different than a restore through iTunes, which you tried. I also tried that earlier and it did not help.
Of course, the reset solution I used relies on you being able to access all of the correct buttons, so I hope you can!
Please let us know if this works for you. If not, since it is less than a year old, it is still under warranty. Contact Apple and see what they can do.

Editor not working correctly in photomerge

Similar Messages

Maybe you are looking for