EE Transfer from One Company Code to Other during a month

Hi Gurus,
I have a query related to transfer of employee from one company code to other in during a month. Because these companies are in one group. And if employee is terminated or resigns company needs to clear all his dues according to government rules and regulation.
I have two Co Codes say 1000 & 3000.
For these two Co Codes there is one chart of account and same wage types are created. These two companies have same payroll area and Control Record.
In the current payroll period which is monthly, if I transfer an employee from one company to other. Is it possible to run regular payroll.
Pls suggest what shall I do in this case....
Regards,
KPJ

Hi,
You can run regular payroll run before that u have to perform Action Transfer/Relocation.
If you have some more quaries pls let us know.
All the Best.

Similar Messages

  • Asset transfer from one company code to other

    Hi,
    I have a scenario to transfer asset from one company code to another company code due to merger.
    Say two company codes X & Y. From 01.04.14 onward Y merged with X  only X exists from that date
    So we want to transfer the assets from Y to X as on 01.04.14  and values of those assets should reflect in X with Gross Value and Accumulate dep posted in Y already.
    For that we are trying to post the same through ABT1N by selecting no revenue and tranfer variant as 1. ( i dont want system to calculate and post any reveneue
    I want following entry to be posted during tranfer
    DR Gross value in X CC
    CR Gross value in Y CC
    DR Accmulated dep in Y CC
    CR Accumulated dep in X CC
    system should not post to P&L GL during transfer.
    Or is there any other method through which we can address this..
    Thanks
    Karthikeyan G

    Hi Karthik
    There is more to it than mere asset transfer
    Usually, during merger, the assets are reevaluated . In thatcase, it helps to retire the assets in Y and rrecreate them in X..
    If you are just taking the assets as-is, then do Abt1n.. Note that the acc entry won't match in each company unless the clearing account is brought in..
    In Y:
    It has to be Dr. Accum dep , Cr. APC and the balance goes to a clearing account
    Similarly in X, same thing will happen
    Br. Ajay M

  • Problem arise during transfer of material from one company code to other co

    Dear CONS
    While doing transfer from one company code to other company code by using movement type- 301 ( direct one step) we got one error message '' Field Bus. Area is a required field for G/L account  JDPO 16020202
        Message no. F5808
    Diagnosis
        The value for field "Bus. Area" in the interface to Financial Accounting
        is an initial value but you are required to make an entry in the field
        selection for G/L account "16020202" in company code "JDPO" linked to
        the field selection for posting key "21".
    PL. SOLVE IT WHERE IS THE SETTING.

    no, the system is not accepting the GL ACCT. as it is a balace sheet account. pl. help.
    Edited by: nirupama swain on Sep 23, 2010 7:00 AM

  • Transfer of employees from one company code to other

    Hi Team,
    I have to transfer some 100 employees from one company code to other company code.  Can any one let me know the best practice for this activity.
    Many Thanks
    Veena

    Hi,
    You cannot assign one PA to multible company codes.
    In you case, create new PA's by copying the Existing PA's.
    Assign the newly created PA's to the new Cocd.
    Check all the groupings.
    In the Inter company transfer aciton limit the infotypes to 0 & 1.
    Record an LSMW for Intercompany transfer and move the employees in the new Cocd.
    NB : perform the actions w.e f 01.04.2010 avoid any changes to the statutory forms.
    Hope this helps,
    Regards,
    Param

  • Asset Transfor from one Company Code to Other Company Code

    Hi i want to know how to transfor total Assets from one company code to other company code
    Ex:
    1 - ABC
    2 - XYZ
    XYZ is my new Company code i have 100 assets in ABC Company Code, i am using that assets since last 3 years how can i transfor total Assets
    Please suggest me,
    Regards,
    Venkat

    hi
    through intercompany transfer it can be possible,first you have to configure two company codes OBYA T-Code,ther you have to give posting keys ,g/l account.
    I hope This will solve your problume.
    assign me points
    Regards
    Ramana

  • How to Maintain the MM Master Data from one company code to other co code

    Hi Experts,
    Can any one pls tell me how to Maintain the MM Master Data from one company code to other co code.
    Presently we created New plants,New Purchase Orgs under different company code.
    1) Material Master data
    2) Vendor MAster data
    3) PIR
    4) Source List
    Is there any standard Transactions...??
    Please reply.
    Brgds,
    KK

    Hi
    Check out the link -
    http://wiki.sdn.sap.com/wiki/display/ABAP/StepstocreateasimpleLSMWusingbatchinput+recording
    lsmw for data migration for  xk01 transaction
    http://www.sap-img.com/general/lsmw-steps-for-data-migration.htm
    Regards
    Anand

  • Excise dta upload from one company code to other

    hi
    Balances in Excise Registers like RG 23 A, RG 23 C and RG 1 will be upload from one company code to other. what is the process. in which table it is available.

    Hi,
    Excise upload from one company code t another means its almost implementation in that respective company code. Do the intial entry of stock balances with 561 movement type and update the registers. For finished product RG1 register will update with 561 movemet type. Closing Balances for RG23A Part-II & RG23C Part-II & PLA registers before going live, to be updated directly in SAP table J_2IACCBAL . Use LSMW for upload.  Please check below link for detailed upload. Hope ths will resolve your issue. Thanking you.
    Excise Registers Part1 & Part2
    Edited by: Padmasri Garapati on Sep 30, 2011 9:32 AM

  • Copying sales order from one company code to other

    Hi,
    I am trying to copy one sales order data from one company code to another, all the details should be same other than the company code and some fields , for this I am using std BAPI Getdetail to get all the details of sales order and passing to BAPI, CREATE FROM DAT2 , so that I create new order.
    When I check the new order, I see everything same but CANCEL DATE value in the ITEM Overview is not copied, I checked the original order , it has cancel date value. The order is an AFS order with AFS tabs.
    I Checked the BAPI GET Detail FM, it doesn't retrieve that information, moreover it doesn't have that field ( J3_ACADA) in the ITEM structure. I can see cancel date value in VBAP. The ITEM structure in CREATE FROM DAT2 also doesn' have that field.
    I can populate using USER_EXIT but I need to get the value from original order.
    How to copy the cancel date value to new order.It should happen only for the orders which I run through this report.
    Any suggestions let me know.
    Thanks

    Hi Uma,
    As my understand, the couple Tcode FS15 and FS16 is used to copy GL master data from in same client or different client.
    The file attract from FS15 will be stored in SAP, not in your local computer.
    And when you run FS16, the system will file this file and upload it.
    Here is selection screen in FS15, you can determine the file name, and keep the batch input name as default.
    After executed, the file is generated with message like below
    Then, go to tcode FS16 with parameter:
    You can untick "Check file only" for Production run.
    When you execute it, the batch input RFBISA20 is generated.
    After that, you go to tcode SM35 to check the batch input RFBISA20, excute this batch input here and check the log.
    Julie

  • XK99 detailed steps to extend vendors from one company code to other

    Company code X having vendors 9000000000 to 9999999999. Now I wanted to extend all vendors to Y company code. Kindly suggest me detailed steps. i know XK99 but give steps.

    Hi,
    Using XK99 T.code you can extend vendors from one comp code to another.
    1. In XK99 slect the LFB1 - Company code dat ,and press F8.( Do not select the fields like MM17).
    2. Their will be 2 tab. select the check for DO not change for existing data.
    3. In other tab (data to be created)...give the list of vendors or Balck and the TO comp code.
    4. Bottem of this tab you have to mention the FROM company code.
    5. Press F8.
    6. Now save.
    With the same method you can extend vendors from one Pur org. to another pur org. by selecting LFM1 instead of LFB1.
    Let me know if still need any further info.
    Hope this will help you..
    Thanks,
    Kumar Arcot

  • Mass extend vendors from one company code to other

    Company code X having vendors 9000000000 to 9999999999. No I wanted extend all vendors to Y company code. Kindly suggest me.
    Thanks
    GP

    Hi,
    Using XK99 T.code you can extend vendors from one comp code to another.
    1. In XK99 slect the LFB1 - Company code dat ,and press F8.( Do not select the fields like MM17).
    2. Their will be 2 tab. select the check for DO not change for existing data.
    3. In other tab (data to be created)...give the list of vendors or Balck and the TO comp code.
    4. Bottem of this tab you have to mention the FROM company code.
    5. Press F8.
    6. Now save.
    With the same method you can extend vendors from one Pur org. to another pur org. by selecting LFM1 instead of LFB1.
    Let me know if still need any further info.
    Hope this will help you..
    Thanks,
    Kumar Arcot

  • Balance transfer from one company code to another

    Hello
    There is already one company code is running....and having 5-6 plants.......now one of the plant is going to become another legal entity.........and the mostly customer and vendors are same with both of them entities.............so for the cutover data what should be the strategy..........
    regards
    Moderator: Please, search SDN

    Re: GL balance upload
    Re: Trial balance upload,
    Re: Data Migration Part - Reg.

  • Balance transfer from one company code to another company code line item

    Hi
    I have company code A in which Suppose for one GL some balances are exists. Now I have created two different company codes B and C and same GL has been created in both company codes now I have to transfer balance from A to B with all line item wise.
    please tell how to do it.

    ASSUME YOU HAVE 1 GL AS WITH 2500 DR BALANCE AND YOU WANT TO TRANSFER 1000 TO B AND 1500 TO C. CREATE BALANCE TRANSFER ACCOUNT IN ALL 3 COMPANY CODES.
    IN COMPANY CODE A
    BALANCE TRANFER AC DR 2500
    AS AC CR 2500
    IN COMPANY CODE B
    AS  AC 1000
    BALANCE TRANSFER AC 1000
    IN COMPANY CODE C
    AS AC 1500
    BALANCE TRANSFER AC 1500
    YOU CAN CREATE LSMW FOR FB01 AND TRANFER LARGE NO OF GL ACCOUNTS/ LINE ITEMS  IN ONE GO.

  • Need to transfer more than 150 employees from one company code to another company code

    Dear Sir/Madam,
    I am new in SAP HCM . We need to transfer more than 150 employees from one company code to another company code due to some business requirement. Please suggest the process of transfer from one company code to another company code considering the other element like gratuity , leave entitlement, Bonus , Exgratia   etc.
    Your quick response will be highly appreciated.
    Thanks & regards,
    Babuna Ray
    Mob:- 9007295305
    [email protected]

    Dear,
    do not transfer employee from one company code to another issues are as under.
    1. Employees Form 16 you will get wrong value as per I Tax law because of company is having different PAN & TAN.
    2. Form 24 Q annual return data will not get properly/easily from SAP because of form 24 Q will run on Payroll area base/ company code base
    3. PF number is different for these 2 company codes then you are unable to submit annual return.
    4. If employee will get hike after the transfer case then system will post expenses period wise means if employee is having 2 different cost center related 2 different company codes posting will done as per this scenario is it accepted to Account Depatment? it is reflected in FICO through KSBB how can they manage expenditure which is related to previous month?
    Like this many points are there you have to study it and then suggest to your client.
    Regards
    Subhedar
    9158881202

  • Transfer Customer Master records from one company code to another company.

    hi ,
        working on a rollout project ,
    needed to transfer Customer Master records from one company code to another company code.
    is there any sap standard BDC/T-code as in case of Vendor Master FK15,Fk16(T-CODE) .
    thanks in advance.
    rahul
    Edited by: RAHUL SINGH on Jul 22, 2009 9:05 AM

    Hi,
    I think you should ask this question in functional consultant forum.
    Thanks,

  • Transfer asset from one company code and to another company code

    Hi Guru
    we have one issue in transfering of asset from one company code to another company code by tocde ABT1N as we get the error transaction type cannot be used for activity retmet from interco.transfer w/o rev to affil.co message no aapo176
    any appropriate method to do transfer and what is the settings we should take care for this
    kind regards
    sunitha
    Edited by: sunitha reddy on Sep 1, 2010 2:22 PM

    Hi Sunitha,
    You should also check the following customizing settings in case of AAPO176 in ABT1N:
    It could be that your transaction type that is mentioned in your error code AAPO176 cannot be used for 'Acquisition from intercompany transfer'.
    In this case check the default transaction types your customizing in Asset Accounting - Transactions - Specify Default Transaction Types.        
    Check if the same default transaction type for 'Acquisition from INTERcompany transfer' is also used for 'Acquisition from INTRAcompany transfer'.
    If not, then this is possibly the reason for the error AAPO176.       
    The transaction types for 'Acquisition from intercompany transfer' AND 'Acquisition from intracompany transfer' should be same as the standard transaction type 158 (please also review SAP note 196012). Both transaction types must be customized the same if you use your own customized transaction types...if one is different than the other, that would also be a reason for AAPO176 to be triggered.                                                                               
    I hope this information helps in addition.
    Kind regards,
    Brigitte

Maybe you are looking for

  • Error in DP90 transaction

    I want to create Sales Order based on Service Order using DP90 Transaction. I have enter Service Order in selection screen of DP90 and click biling reqest icon then system is not moving futhere showing " Initializing........... " Pl help me to resolv

  • Modify schema using ldif file and ldapmodify

    Suppose I want to create a new attribute and add it to a previously created object class; using an ldif file and ldapmpodify. It seems that my only option is an ldif file that looks like this: dn:cn=schema changetype: modify replace: objectclasses ob

  • Installing camera raw

    Hi i sent the following question a couple of hours ago: I am trying to install the latest version of camera raw, v6.6. I have downloaded the update file. However when i run the patch installer i get the message that it is not applicable. Does anyone

  • Iphoto 11 changed default location for pictures

    Before upgrading to iphoto 11, the default location for uploading pictures used this (using a picture taken on July 31, 2011 as an example): iphotolibrary/masters/2011/July 31, 2011/[filename].  Now when I upload pictures, it goes to a completely dif

  • While doing invoice verification, for fright value tax code not appearing

    Hi All, While doing invoice verification for PO which is having fright conditon, system is not displaying tax code in invoice. Every time user has to select manually in the invoive verification. Is there is any config missing for that fright conditio