EEWB - name for the created Z objects

Using EEWB, Z objects are created. For example extending BP the table ZBUT000... has been created.
Is there any configuration to add other prefix so that the above object would have been Z<custom prefix>BUT000.... ?
This is to comply with the naming conventions for a project.
I think it is not possible but who knows.
Thank you,
Mihai

You can see all possible settings in EEWC tcode.
BR,
Artur Litvinov.

Similar Messages

  • I have taken over 9999 pictures with my phone and it is now creating duplicate names for the pictures starting back at 0001 making it difficult to manually upload my photos like i always have. How do i fix this?

    I have taken over 9999 pictures with my phone and it is now creating duplicate names for the pictures starting back at 0001 making it difficult to manually upload my photos like i always have. How do i fix this?
    (I tried to just write this as a reply to someone who had already asked the question whos problem was magically solved after posting the question and the site was not allowing me to post to it so here I am)

    Additionally, when I try to sort the photos by date to easily extract the newest photos which I have not yet uploaded, it is unable to put them in correct order regardless of the fact that the date is correct. Only the videos end up in chronological order for some reason while the photos stay in order by name.

  • Table name for a Master Data Object

    Could you advise on how I can determine the table name for a Master Data object.  It is an object that I created.  Thanks

    Hi Niten!
    It's enough to go in RSA1 to your object definition page in master data/text tab!
    Hope it helps!
    Bye,
    Roberto

  • Table name for Invoice created with PO ref

    hi,
    I required Table name for Invoice created with PO ref.
    Regards,
    Ali

    HI,
    Check the table RSEG: Document Item: Incoming Invoice
    Look for the fields BELNR and EBELN
    Regards
    KK

  • How to find the program name of the created sap query ?

    how to find the program name of the created sap query ?

    Hi avinash,
    Try in this way..
    Go to SE16 and then go to table TSTC.
    in that give program name as <b>*followed by your query name</b>
    (for example *TESTQUERY)
    and run , that will give progname======queryname.
    this way you can find program name.
    vijay

  • Table name for the field FAEDT(net due date)

    hi every body,
    plz can any body tell me the table name for the field net due date(FAEDT).
    its very very urgent
    thanq.

    Hi mark chalfen,
    thanq very much ur reply.
    actually my client want to change the payment term for all the vendor invoices.so wt we did is... we created aprogram to change the old payment term to new payment term in the vendor line items(fbl1n).
    when we run the program its changing the payment term and the base line date and the NO of days in the vendor linitems.but it not changing the net due date based on the new baseline date.
    i think with out changing the net due date only changing the payment term is use less.coz the item again show as due in the same date.
    so how can we change the net due date based on the new baseline date.?from which table we can take the field FAED and update with the new date.
    plz advise me?
    thanq.

  • Table name for the structure MEPO1211

    Hi Friends,
    I want to find out the the Purchase Orders created with USD currency.   This currency indicator is not available in the table EKPO.  On checking the PO, the currency field is in the strucure MEPO1211.
    Kindly let me know the table name where the PO with currency is stored or the table name for the structure MEPO1211.
    Thanks in advance.
    Regards,
    Mark K

    Hello Mark
    If the fields belong to the PO header then EKKO is the table you should look for.
    In case of item related data the table is EKPO.
    In any case structure MEPO1211 just belongs to screen 1211 in the PO application.
    Further Reading:
    [Purchase order item - cl_po_header_handle_mm|https://wiki.sdn.sap.com/wiki/display/ABAP/Purchaseorderitem-cl_po_header_handle_mm]
    Regards
      Uwe

  • Table name for the transaction data

    Hello Gurus,
        what is the table name for the transaction data which we have created through t.code PRO5. we are generating report for the total kms per vehicle type for a employee. these data in which tables can i get? the data related to trips ? 
    thanks in advance
    regds
    ramachandra

    Hi,
    Pl use RPR_TRIP_HEADER_DATA programme for getting general trip data, which will have details about number of KM travelled by employee for each trip, amount to reimbursed to the employee etc.
    Thanks,
    Nandagopal C

  • Table name & field name for the tab Document in Marketing Planner

    Anybody knows what is the table name and field name for the "Document" in Marketing Planner and Account Planner.  In this tab we attach relevant Campaign or Coupon or reference advertisement document.  I am not able to find out in which table and field it is storing.

    like yogesh has suggested
    you have to use the table RESB only to get the total qty by using the field BDMNG
    or create the query using the same table and get total qty report.
    use logical database RMM

  • Any Function module or BAPIs are available to get scheme name for the inter

    I have internal order no value in table  AUFK-AUFNR ,  and the internal order corresponding Scheme value is available in IMPR-PRNAM . Now I want to inner join both the tables to extract the data , but there is no common field . Is there any Function module or BAPIs are available to get scheme name for the internal orders?

    look at DB-VIEW  "V_IVP_OR".
    Regards,
    Laurent

  • Print program name for the dunning form F150_FR_DUNN_01 in sapscript

    Hi,
          I am not getting the exact print program name for the dunning form F150_FR_DUNN_01 in sapscript. After an extensive search I have come across few names of print program like SAPF150D2 and SAPLF150. But still I am not understanding which one to use for the form and also how to use it. I am unable to understand which include I should use to write my code.
    Kindly help me.
    Thanking you.
    Pujarini Patra

    Hi,
    Yes, you should be able to assign F150_FR_DUNN_01 in Dunning Forms customizing:
    and yes, I too would absolutely try to go for either a Smartform or even a PDF Form (if i'd have all the necessary setup for them, like Adobe Document Services, in the system already). I have Basis 702 SP  0011and FINBASIS 600 SP 0021, so all the following technicalities refer to those releases:
    The corresponding SAP sample Forms are:
    - F150_DUNN_SF for Smartform; and
    - F150_DUNN_SF for pdf Form (don't let the name confuse you )
    I'm not entirely sure if it's a good idea to try to convert/migrate Sapscript to Smartform and the Smartform to PDF Form - have never done that  myself and don't know how good/usable the migration result is. I just take the interface of Smartform from SAP and do the rest from scratch or by copying over the common parts of our existing custom forms.
    There are the SAP Standard wrapper FMs for SF and PDF forms already in the System:
    - FI_PRINT_DUNNING_NOTICE_SMARTF calling PRINT_DUNNING_NOTICE_SF and
    - FI_PRINT_DUNNING_NOTICE_PDF calling PRINT_DUNNING_NOTICE_PDF.
    So, theoretically, all you had to do to replace SapScripts (or even to enable all three form types) is to assign a custom BTE Event handler FM to event 1720 (for correct Application), which could detect, what type of form is assigned in Customizing and call the corresponding wrapper FM.
    As a sample for coding PDF form wrapper call one could take FI_PSO_EVENT_00001720_PDF (if you have IS-PS) in the system. I'd take out the IS-PS specific "business logic" like posting dunning charges (if it does not apply to my solution) and add the logic to decide, which wrapper to call.
    The confusing part about the customizing (Table T047E) to me is that there seems to be no form type defined anywhere in there... just the FORNR field for form name, which should apparently take the names of all three form types... I'd  try to extend that table with custom Form type field and try to regenerate Table Maintenance dialog for  view Cluster VC_T047_F... That would save the whole effort to try to detect the type for  form assigned...
    Another tip, in case you didn't know it already: you should be able to see all the Customizing paths, where T047E is involved, when you enter table name in SM30 and press "Customizing" and then "Continue w/o Specifying Project":
    The selected entry is the one you are looking for to assing your custom forms, I believe.
    cheers
    Janis

  • How to find out the printer name for the Idoc

    Hi guys
    I want to find out the printer name for the Idoc,,some default printer is attached for one idoc,then how can we see the printer name for this idoc.
    Regards
    Madhoo

    Hi,
    For ALE/IDOC the  medium will be either ALE or EDI but not printer.So it might be wrongly attached.As such there won't be any printer attached to idoc.
    Regards,
    Nagaraj

  • How to find table name for the fields from Standard Extractor in CRM system

    How to find table name of fields from the standard extractor in CRM system ?
    e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
    Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.

    Hi ,
    Please find the link below for understanding BW CRM analysis.
    http://help.sap.com/bp_biv135/html/bw.htm
    activate the CRM DSs by scenario:
    1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
    SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
    2) Activate the Business Content DataSources (tcode RSA5).
    Select/enter the application component and choose Execute (F8).
    To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
    To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
    3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
    As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
    You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
    The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
    All BW-Adapter metadata is considered when versions are compared:
    Header information (Table SMOXHEAD)
    Mapping information (Table SMOXRELP)
    Global selection conditions (Table SMOXGSEL)
    Attribute key fields (Table SMOXAFLD)
    Hope this helps.
    Regards,
    csm reddy

  • Can anyone tell me the field name, table name for the following scenario?

    Hi All,
    Can anyone tell me the field name and the respective table name for the following scenario's?
    1. A report to list all the materials to which Invoice is done and delivery is pending.
    2. A report for Order tracking.
    3. A report, which gives PO(Purchase Order),  Pricing details.
    4. A report, which calculates the MATERIAL COST. It will select all the material issued for the entered service order number from  stock.
    Thanks & Regards,
    P.Gowrishanker
    Edited by: Gowrishanker pari on Jun 1, 2008 8:58 AM

    I believe that OmniVision Technologies has the contract for the 3gs.

  • Table name for the status Cstd

    Hi
    Need the table name for the sales order line item status Cstd
    Steps
    Go to the sales order line item
    go to the Tab status
    under that in processing status--> system status
    here Cstd is there but we are not able to find the table name for that
    Strecture is RV45A and field name is STTXT
    we are planing to restrict the PP order being released if the status is not Cstd
    PP order should release if the status in Sales order line item is Cstd
    Can you help to findout the table name foth above field
    Thanks
    Kameshwar Rao

    Hi
    Table name is VBUP and the method to check the  creation of Production order is BADI workorder_update
    I would rather prefer to have a COSTED status as a part of the incompletion Log in SD module so that you cant save a SO if SO is not costed... See if that is possible for you
    OR you can also change your Req Class settings to auto calculate SO cost estimate upon Saving SO
    br, Ajay M

Maybe you are looking for