Effects Control panel in the source window

Is there a way to prevent Premeire 5.5 from burying the Effects tab on the source/viewer window (the one on the left) - I don't know what I'm doing wrong, but I have to keep expanding that panel's workspace just to find the effects tab.
Thanks everyone for all your help!

Dock, group, or float panels

Similar Messages

  • Markers in the Effect Controls Panel

    I'm up to page 165 of the Premiere 6 manual, trying to understand markers, and it says:
    Create markers in the Effect Controls panel
    In the Effect Controls panel, you can view all of the markers that you created in the Timeline panel. You can also add markers to your sequence to designate where you would like to place effects and see the markers as you work in the Effect Controls panel. In addition, you can create and manipulate markers directly in the Effect Controls panel.
    1. Drag the playhead to the place where you want to create a marker.
    2. Right-click (Windows) or Control-click (Mac OS) in the timeline ruler:
    In Premiere Pro CS5.5, and earlier, choose Set Sequence Marker, and then choose the type of marker you want to set.
    In Premiere Pro CS6, choose Add Marker, or press the M key.
    I follow those instructions to the best of my ability, and nothing appears in the Effect Controls Panel. The previous three paragraphs are labelled as CS5.5 and earlier. I'm wondering if this paragraph should also have been labelled as CS5.5 and earlier.
    In CS6, do markers appear in the Effect Controls panel? If they do, how do you get them to appear?

    Thanks Jeff. My Effect Controls timeline was hidden. I don't remember it even being there, but I suppose it must have been at some stage.
    Now, another Marker matter. At the bottom of page 165 it states:
    "Move a marker
    Do one of the following:
    To move a clip marker in a clip that’s in a sequence, open the clip in the Source Monitor and drag the Marker icon in the Source Monitor’s time ruler. (You can’t manipulate clip markers in the Timeline panel)."
    This is what I've done:
    In the Source Monitor I set up a marker for a particular clip. Three things happen.
    An empty grey Marker appears above the Timeline in the Source Monitor (that Marker disappears if I move the Playhead).
    Two green Markers appeared inside the clip in the Sequence Panel (those Markers stay put).
    The Marker details appear in the Marker Panel.
    I can cause the Marker to move if I change the In and Out points in the Marker Panel, but I cannot "drag the Marker icon in the Source Monitor’s time ruler." I can't see any Marker, except the empty grey one.

  • I can not install the Icloud control panel on a new windows 7 pc wtih outlook 2010. I get "you can't sign in because of a server error" .

    I can not install the icloud control panel on a neww windows 7 pc with outlook 2010. When i try I get "you can't inssign in because of a server error"
    I have :
    turned of the windows fire wall and antivirus protection
    stop and started the bonjour service
    done the "netsh winsock reset"
    updated all the drivers
    I can login to icloud.com with no problem and view my calendar.
    Apple chat also provide me with a test id and password to try to install the icloud panel, I got the same error message???
    Anyone have a fix?
    Thanks,

    To solve this problem you can:
    Windows 7
    1) Click on Start
    2) Type cmd and press enter
    you will see a new window
    3) type "netsh winsock reset"
    4) restart the machine
    should work.
    If still does not work you must disable the firewall and antivirus
    Para solucionar este problema debes hacer lo siguiente:
    en Windows 7
    1) click en Inicio
    2) escribe CMD y pulsa enter
    te va a aparecer una nueva ventana
    3) escribe "netsh winsock reset"
    4) reinicia la maquina
    deberia de funcionar.
    Si aun no funciona debes de deshabilitar el firewall y el antivirus

  • I want to install PSE 13, but want to uninstall PSE 12 first. It is not listed in the control panel. I have windows 7. How do I uninstall it?

    How do I uninstall PSE 12? It is not listed in the control panel. I have windows 7. I want to install PSE 13.

    Does the iPod show in My Computer? If so then go to My Computer>iPod>DCMI Folder and copy them from there to where you want them

  • Autoscroll the 'Effects Control' panel

    CS4:  How do I get the Effect Control Panel to autoscroll like the timeline does?  The current time marker scrolls right off the end of the panel.

    You can't.

  • I have set up iCloud control panel 3.1 for Windows 7 but when I add a contactact on my PC the information is not updating my iPhone and sames hold true for my calendar. Any suggestions?

    I have set up iCloud control panel 3.1 for Windows 7 but when I add contacts on my Windows 7 desktop it is not updating to my iPhone 5 and the same holds true with my Calendar.  Any suggestions?  Thanks

    The version that came with Microsoft Office Home and Business 2010 and says Version 14.0.7106.5003 (32 Bit) and the e-mail I have set up as POP / SMTP.  Thanks for your reply.

  • Where is the updated iCloud Control Panel 4.0 for Windows with iCloud Drive compatibility?

    When is iCloud for Windows 4.0 to be released. I saw a link but, now it's gone. It appears that Apple advertised iCloud Drive, but oddly wasn't prepared to have it ready.

    Download link for iCloud Control Panel 2.0 for Windows. There is no mention of 32/64 bit versions on the page so presumably this is a 32-bit program capable of running on all flavours of Windows from Vista SP2 upwards.
    tt2

  • No 'Keyboard' tab on boot camp control panel - MBP Jun 2009 + Windows 7100

    I've been trying for 2 weeks now to get the function keys to work on my MBP (bought Jun 2009) using Windows 7 Build 7100.
    This is the 3 ghz MBP with 256gig ssd. Boot camp partitoned fine, windows 7 installed ok, and boot camp ran fine as well. I even downloaded the 2.1 boot camp update and reinstalled the drivers.
    The thing is no matter what i do, the keyboard function keys dont work. And i've noticed that the Keyboard tab does not appear on the Boot Camp control panel. The dvd eject button doesnt work either, the sound not working, and also the trackpad is a bit jumpy.
    I've researched a lot already for this problem, and it seems people do get Windows 7 to work find on a MBP (even with Vista drivers) so i'm not sure what i'm doing wrong. Any help would be much appreciated.
    The machine itself by the way is incredibly quick under Windows 7. Everything is pretty much instant. What a pleasure:)

    I've solved the problem.
    The Boot Camp Support Software I orginally ran was downloaded straight from the Apple website so I thought it must be ok, but just to be sure I went back into OS X and downloaded it through the Boot Camp Assistant, switched back to Windows, installed it and everything game out fine! There must have been something Apple put into the software through Boot Camp but not their own site. All the tabs were there, the volume/brightness buttons worked etc.

  • ICloud Control Panel 3.1 for Windows

    After I have installed the iCloud Control Panel 3.1 for Windows.  My harddisk has been formatted to RAW.  Can anyone let me know why???? That's crazy!!!

    The version that came with Microsoft Office Home and Business 2010 and says Version 14.0.7106.5003 (32 Bit) and the e-mail I have set up as POP / SMTP.  Thanks for your reply.

  • ICloud Control Panel 2.0 for Windows 64 bit

    Does iCloud Control Panel 2.0 work with Windows 7 64 bit? If so can you give me the link to the direct iCloud Control Panel for Windows 64 bit.

    Download link for iCloud Control Panel 2.0 for Windows. There is no mention of 32/64 bit versions on the page so presumably this is a 32-bit program capable of running on all flavours of Windows from Vista SP2 upwards.
    tt2

  • Controls in Effect Controls Panel are twirled close. How to open them?

    I have a question please .The chapter 211 in Adobe Premier Pro CC 2014 classroom in a book show me that I may to adjust an ease lines ,in a Effect controls panel .It is look like that.
    So , when I look at  to my Premier Pro Effect controls panel ,I simply haven't these lines.And here is my Effect controls.Where they are?

    You need to click on the disclosure triangle next to the effect name to reveal the lines:
    MtD

  • HT5055 Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be.  I think it is caused by JAVA but am confused as when i view on snow leopard it works 

    Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be.  I think it is caused by JAVA but am confused as when i view on snow leopard it works  can you help

    Open "Java Preferences" either from spotlight or your utilities folder...it's probably going to say you need to install a java runtime. Then just click install!

  • I cannot use a website I need to use, with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please advise. Also, my control panel locks up since Windows Explorer has pbms. Which is why I am using Firefox instead. Thanks for any help!

    I cannot use a website I need to use, with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please advise. Also, my control panel locks up since Windows Explorer has pbms. Which is why I am using Firefox instead. Thanks for any help!

    ''I figured it was going to be FAFSA causing your problem.''
    Install Portable Firefox 3.6.x to your hard drive for that one website. It won't affect your current Firefox installation at all. <br />
    http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • Roll Name in the Source Window

    Is there a way to automatically show all of my roll names in the source window? I would like to be able to just click on a roll name in the source window and be able to see those particular photos in the main iPhoto window.

    Welcome to the Apple Discussions.
    No, Rolls don't get listed in the Source Pane.
    However, there is a way to view just the roll you want. Choose Library from the Source Pane and View > Film Rolls. (The entire library must be selected, with no filter in operation. Be sure all Year Smart Albums are selected - look below Library in the Source Pane. Click the little triangle to reveal or hide them.) Each roll has a disclosure triangle next to its title. Click it to open or close the roll. Option-click one triangle to open or close all rolls in your library. With all rolls closed, it is easy to scroll through the roll list, open one roll, and see just the photos in that roll.
    To make it easier, I title all of my film rolls. Click the little i in the lower left corner to open the Info Pane. When you select a roll's header in the main window you can edit its title, roll date, and comments by typing directly in the Info Pane. Comments are especially handy; they display only when the roll is closed. I use comments to list the contents of a roll, so that I know which roll to open when I want to find a particular photo.
    If you still want your rolls in the Source Pane, you can drag the roll's header there and an Album will be created with the same name and photos. To create Albums that automatically update when you change the photos in the rolls, you would have to create a Smart Album for each roll with the category "Roll contains (type the roll name)". That seems too cumbersome, in my opinion.
    Regards.

  • Can i edit a synched video from plural eyes in the source window first?

    I synched my audio and video files in plural eyes which gave me a synched fill or sequence which is great, but I really want to edit it in the source window before putting it into the Program window. How can I edit it in the source window first?

    You mean trim it? Like grabbing a certain section of the syned clip?
    If so, bring it up on the source monitor, go to your in point and click "I" and then go to your out point and click "O". Then grab the preview image and drag it to your timeline. You can also press "," or "." to bring it down there.

Maybe you are looking for

  • Regarding FBL1N(vendor line items)

    hi experts , I have to display the opening balance(balance carried forward) with vendor line items ,I found the table n field name but don't know how to display in header or in <b>ALV</b> list. table name is <b>LFC1-UMSAV</b>. ldb is <b>KDF</b>. hope

  • Font smoothing when using JWS

    Hi, I've noticed something odd while developing a desktop app. When I run it via the webstart link, it looks fine, but when I run it inside netbeans or double-click the .Jar file the fonts look non-smoothed and no where near as good. Whats causing th

  • A problem creating a Search Help against domain table dd07v...

    At present I use FM DDIF_DOMA_GET to retrieve the Domain Values for a given field/domain. I then populate a drop-down list box with these values and use in a conventional dynpro. However, what I would like to do is create a search help against the fi

  • Fields appear grey instead of light blue

    I have a user (using Acrobat X) that when she opens a pdf form she sees the fields in grey. Even though she changes the settings in Prefernces to light blue, it defaults back to grey.

  • I am trying to access Organizer in Premiere Elements and it just shuts down the programme

    I am trying to access Organizer in Premiere Elements and it just shuts down the programme.  I tried reinstalling the programme but it just does not let me get to Organizer.  Now after reinstalling, it does not let me into the programme.  It just keep