EHP4 Dual stack

hi guys,
we plan to upgrade Enterprise Dual stack(ABAP+JAVA) System to EHP4 system.
In EHP4 upgrade document it says, No dual stack supported for EHP4 installation..was that mean
only for Installation or upgrade too.
Seperate SID is required for EHP4 system after upgrade? Please confirm.
thanks

hi jaichan,
yes, you are right ..For new installation of SAP ERP to EHP4 level, you cannot install dual stack system..i have read in sap note 855534..please find below the extract from this note:
As of SAP Business Suite 7, you can no longer install Dual Stack Application Systems (ABAP+Java).
If you want to use both SAP Business Suite ABAP and Java Components in your system landscape, you have to proceed as follows:
1. Install a separate ABAP-based SAP Business Suite system.
2. Install the required Java components in a separate Java-based SAP system.
3. Configure the connection of the Java-based SAP system to the ABAP-based SAP Business Suite back-end system.
The SAP Business Suite 7 comprises: EHP4 for SAP ERP 6.0, SAP CRM 7.0, SAP SCM 7.0, SAP PLM 7.0, SAP SRM 7.0
As of now you will find the latest recommendations at a central place in SDN:
https://www.sdn.sap.com/irj/sdn/landscapedesign -> Distribution Models
You will also find information about the deployment of SAP NetWeaver usage types and the SAP Business Suite there.
but you can upgrade your previously installed SAP ERP dual stack system without having seperate SID's thing...
We have upgraded around 50 of our systems without any problem
thanks sunny

Similar Messages

Homogeneous system copy ECC 6.0 EHP4 dual stack system

Hello ,
I have a requirement of homogeneous system for the below Source system
Source system :
ECC6.0 EHP1 ABAP+java dual stack system with DB2 AIX
Required Target system:
ECC 6.0 EHP1 (same as target system except single stack java not required)
1 .I was trying to use db specific homogeneous system copy method wiht redirected restore script
2. Not possible to get downtime on source system hense it's a production system , then i used target system installaion with homogeneous system copy database specific mehthod
Problem is - it's asking migration export while creating the target system , but i don't have any migration export since i have not exported from source system .
please help us to proceed further.
Thanks in Advance.

2. Not possible to get downtime on source system hense it's a production system , then i used target system installaion with homogeneous system copy database specific mehthod
What did you choose to do in database specific method - DB2 backup/restore ?
//Backup Restore
Homegeneous system copy(database specific method)
Target -
As I understand, you have started IMPORT using SAPinst for target system installation. During IMPORT, what target system installation (only ABAP or what ?) you chose ?
//I took ABAP+JAVA
'Problem is - it's asking migration export while creating the target system , but i don't have any migration export since i have not exported from source system .'
This is because the source system is ABAP+Java, and now during target system installation, then IMPORT procedure is asking for Java Export dump.
Thanks

LDAP configuration for HR Portal in dual stack EHP4 - Best Practice

Hi Experts,
Hello Experts,
We are trying to use the JAVA Stack of ECC server for HR Portal i.e Dual Stack and have applied EHP4 package for ESS/MSS Appraisal. When we are trying to configure the LDAP ADS datasource through portal , we are not able to do it since ABAP datasorce file is available by default.This we are doing for HR(ESS/MSS) Portal.This is for access to the object data stored in the Active Directory.
We have already checked note 718383.
Also, for the scenatrio ,LDAP <-> ABAP <-> J2EE
We have already checked sap help doc.here:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/e6/0bfa3823e5d841e10000000a11402f/frameset.htm
What should now be the best practice to follow for configuration ? Should we go for separate Portal server or is it possible to use Java Stack of ECC server for configuration ?
Also, LDAP <-> ABAP <-> J2EE scenario please suggest if it a best practice and we can follow the same .What are the limitations , risks and issues ? Please suggest if this has been implemented and running well in any live project .
Are the suggestions applicable for load balanced production servers as well?
Thanks,
Rakesh

Hi,
the UME datasource must remain ABAP but you can sync the users between ABAP and LDAP using the LDAP connector:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/48/74040175bb501ae10000000a42189b/frameset.htm
Regards,
Jozsef

Error in phase import Homogeneous system copy from a BI 7.3 dual stack ABAPJAVA

Hi
I'm doing a Homogeneous system copy from a BI 7.3 dual stack ABAP+JAVA system with an Oracle DB (11g version, 11.2.0.3.0 patch level) with AIX ibm OS.
Before starting export I've executed in the source system the report SMIGR_CREATE_DDL, as described in sap note 888210, and I generated *.SQL files.
After, during the import in the target system I get the following error message:
vi /expdb2/tmpDB0/sapinst_instdir/NW730/ORA/ORA/COPY/ORA/SYSTEM/STD/AS/import_monitor.log
INFO: 2014-03-08 00:21:57 com.sap.inst.migmon.LoadTask run_report
Monitor jobs: running 0, waiting 1, completed 60, failed 5, total 66 finish processing of package SAP0000
You can see below the detail of the 5 packages in error:
SAPAPPL0_1_5
DbSlExecute: rc = 99
(SQL error 2216)
error message returned by DbSl:
ORA-02216: tablespace name expected
(DB) INFO: disconnected from DB
/usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140307141347
SAPZPSA
DbSlExecute: rc = 99
(SQL error 2216)
error message returned by DbSl:
ORA-02216: tablespace name expected
(DB) INFO: disconnected from DB
SAPDODS
DbSlExecute: rc = 99
(SQL error 922)
error message returned by DbSl:
ORA-00922: missing or invalid option
(DB) INFO: disconnected from DB
SAPDFACT
DbSl Trace: Error 1741 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-01741 occurred when executing SQL stmt (parse error offset=8126464)
(DB) ERROR: DDL statement failed
( ALTER TABLE "/BI0/F0TCT_C01"    ADD PARTITION "/BI0/F0TCT_C010000001131" VALUES LESS THAN ( 0000001131 )    TABLESPACE "" )
DbSlExecute: rc = 99
(SQL error 1741)
error message returned by DbSl:
ORA-01741: illegal zero-length identifier
(DB) INFO: disconnected from DB
SAPZOSO
DbSl Trace: Error 922 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-00922 occurred when executing SQL stmt (parse error offset=242024448)
(DB) ERROR: DDL statement failed
(CREATE TABLE "/BIC/B0000989000"    ("REQUEST" VARCHAR2 (000090)      DEFAULT ' ' NOT NULL,    "DATAPAKID" VARCHAR2 (000018)      DEFAULT '000000' NOT NULL,    "PART
NO" NUMBER (000010)      DEFAULT 0 NOT NULL,    "RECORD" NUMBER (000010)      DEFAULT 0 NOT NULL,    "PLANT" VARCHAR2 (000012)      DEFAULT ' ' NOT NULL,    "MATERIA
L" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "RPA_CURUOM" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RPA_MVF" NUMBER (000017, 000002)      DEFAULT 0 NOT N
ULL,    "PRICE_UNIT" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "RPA_QTYUOM" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "RT_SSMFGR" VARCHAR2 (000024)
    DEFAULT '00000000' NOT NULL,    "BASE_UOM" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "FRE_PLNPUR" VARCHAR2 (000036)      DEFAULT ' ' NOT NULL,    "FRE_MINS
TK" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "FRE_SERLEV" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "FRE_SELCLS" VARCHAR2 (000003)      DEFAULT '
0' NOT NULL,    "FRE_REPLST" VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "ABCKEY" VARCHAR2 (000003)      DEFAULT ' ' NOT NULL,    "RECORDMODE" VARCHAR2 (000003)
    DEFAULT ' ' NOT NULL,    "RT_SERVLEV" VARCHAR2 (000003)      DEFAULT ' ' NOT NULL,    "RT_SUPS" VARCHAR2 (000003)      DEFAULT ' ' NOT NULL,    "VAL_TYPE" VARCH
AR2 (000030)      DEFAULT ' ' NOT NULL,    "PUR_GROUP" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "RT_VPNEU" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,
"CURRENCY" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RT_VRKPE" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "DISMM" VARCHAR2 (000006)      DEFAULT ' '
NOT NULL,    "SALES_UNIT" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "RT_VP_BT" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "RT_VPE_BT" NUMBER (000017,
000003)      DEFAULT 0 NOT NULL,    "RT_VP_NT" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "RT_VPE_NT" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "R
T_VWAERBT" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RT_VWAERNT" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RT_VPMEIBT" VARCHAR2 (000009)      DEFAULT '
' NOT NULL,    "RT_VPMEINT" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "LOC_CURRCY" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "UNIT" VARCHAR2 (000009)
DEFAULT ' ' NOT NULL,    "CM_MCATDIV" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_CDT1" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_CDT2" VARCHAR2
(000054)      DEFAULT ' ' NOT NULL,    "CM_CDT3" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_CDT4" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_HIEID"
VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "CPSTLC" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "CPSVLC" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL
,    "STOCK_VAL" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "STOCK_QTY" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "RT_SEASON" VARCHAR2 (000012)
DEFAULT ' ' NOT NULL,    "RT_SEASYR" VARCHAR2 (000012)      DEFAULT '0000' NOT NULL,    "CALDAY" VARCHAR2 (000024)      DEFAULT '00000000' NOT NULL,    "CALWEEK"
VARCHAR2 (000018)      DEFAULT '000000' NOT NULL,    "RF_BNDID" VARCHAR2 (000012)      DEFAULT ' ' NOT NULL,    "/BIC/ZCATTR3" VARCHAR2 (000006)      DEFAULT ' ' NOT
NULL,    "/BIC/ZCSTYLE" VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "/BIC/ZCIMAGE" VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "/BIC/ZCBRNDTYP" VARCHAR2 (000
003)      DEFAULT ' ' NOT NULL,    "/BIC/ZCGROUPE" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL)    PCTFREE 10    PCTUSED 00    INITRANS 001    TABLESPACE    STORAGE (
INITIAL    0000000016 K            NEXT        0000001024 K            MINEXTENTS 0000000001            MAXEXTENTS 2147483645            PCTINCREASE 0000
    FREELISTS 001            FREELIST GROUPS 01)      PARTITION BY RANGE ("PARTNO")      (      PARTITION "/BIC/B00009890000000000002" VALUES LESS THAN      (00000
00002)      NOCOMPRESS      ) )
DbSlExecute: rc = 99
(SQL error 922)
error message returned by DbSl:
ORA-00922: missing or invalid option
(DB) INFO: disconnected from DB

hello,
Before anything update DB shared lib, R3load, R3ldctl and R3szchk in the target system. Also Check in source system if you have any tables o index missing in db02 transaction, If this system wa upgraded from a previous release please check TAORA and IAORA tables in source system and check all the tablespaces named in those tables are created in the target system.
let me know how it goes.
Regards,
Michael

Dual Stack NW 7.0 installation with R/3 Backend as UME

I have a quick question guys. I am about to install a dual stack NW system with ADS(SQL server database on windows) and will use a R/3 Enterprise running on unix as the UME datasource. Now this R/3 enterprise backend already acts as bakend for Portal system and uses sap logon tickets and as such already has the user SAPJSF. Now when i actually perform the NW 7.0 installation and enter a master password during the course, would this override the SAPJSF user in R/3 backend system at all.
What are the general problems that are caused with using an existing ABAP only system as the UME for your Java stack(Dual stack actually) systems. Can you advise.
Regards
Kalyan

Hi,
Now when i actually perform the NW 7.0 installation and enter a master password during the course,
would this override the SAPJSF user in R/3 backend system at all.
NO....Not at all..
SAPJSF user is used for the communication between ABAP and JAVA stacks. SAPJSF user is an independent user of each independent ABAP stack.
ABAP data/user-store is the place where the users, roles and authorizations of an ABAP System are stored.
And with the same concept, the UME is the same mechanism for users, roles, permissions of an JAVA system.
After installation of your new NW ABAP+JAVA Stack, you will have to specify the SAPJSF user of ur old R/3 ABAP system which you want to use as User Data Store for ur Newly installed Java System's UME.
In ABAP System section u will have to provide all details of ur SAP R/3 application server, which ur portal is already using as User Data Store.
What are the general problems that are caused with using an existing ABAP only system
as the UME for your Java stack(Dual stack actually) systems. Can you advise.
It depends on the usage of your new application server.
Regards
Bhavik G. Shroff

Question about the number of ERS instances in a dual-stack MCS environment

Hello to the group.
I have a simple question for those running a NetWeaver 7.0 (i.e. 2004s) dual stack (ABAP/JAVA) setup in an MCS environment. On each individual node, do you have two separate ERS processes running on the node (as seen in Task Manager) that is opposite to the system running the ASCS/SCS instances? If so, do you have a set of profiles for each of these ERS processes (I am guessing that is true)?
Thanks in advance for your help.
J. Haynes

Has anyone found a good description of the process that runs after one node fails over to another one? help.sap.com mentions that the ASCS will restart and run the command enstatus.cmd but I cannot find what is supposed to happen after that. Is the ERS service itself stopped?
Thanks
J. Haynes

PI 7.1(dual stack) and PI 7.31(Single stack) -

Friends,
I have a proxy to proxy scenario - Proxy --> PI --> Proxy
We have two servers PI 7.1(dual stack) and PI 7.31(Single stack)
i did the development in ESR and my ESR is pointing to PI 7.1, when i execute the scenario i receive one error message "receiver could not be determined", i ensured that all my input is correct, still i get the same error message.
the expectation is my scenario should point to PI 7.31, Can some one help me where and what settings i need to make in-order to make it work.
Please Note: All my data is correct and i read some scn forums wherein they asked to refresh the cache , i have refreshed the cache also still the problem persists.
Thanks in advance!

Iñaki Vila
Communication component in ID is the same as sender side.
could you share your sender configuration?
Did you mean Tcode - SXMB_ADM and under that Sender/Receiver configuration
Krupa Rao Atluri
In ID steps are correctly defined.
I spoke to my colleague he hinted that at RUN TIME we want to point to PI7.31, he mentioned config change needed in SXMB_ADM
any further inputs from any one could be useful.

Mapping error in PI 7.4 dual stack

Dear Experts,
Recently we upgraded our system from PI 7.1 to PI 7.4 dual stack.
Scenerio is ECC->PI->SOAP(Webservice) synchronous
Issue in detail:
We are creating a invoice in ECC system through PI its updating in third party site using SOAP webservice and will get a reference number from that site and then updating in ECC as in synchronous way.
Invoice data's are reached PI sucessfully from ECC but it not updating in the site and getting below mapping error after upgarded to PI 7.4.
Your points will be highly appreciable.
Kindly help to sort out this issue.
Best Regards,
Monikandan

Hi Monikandan,
It seems you are trying the sign the payload in your java mapping. So, looking at the attached error, there could be 2 possibilities:
1) Either there is no certificate with alias: *_PRD
2) This certificate is stored in some "System" type keystore view which is not accessible from you mapping code. Try to move your certificate to some "User" keystore view.
Thanks & regards,
Piyush

Parameterized mapping in PI 7.31 Dual Stack

Hi All,
I am working on PI 7.31 Dual Stack. I am getting the below exception in parameterized mapping:
com.sap.aii.utilxi.misc.api.BaseRuntimeException; com.sap.aii.mapping.api.UndefinedParameterException: The input-parameter TestVal does not exist.
I could test in MM test tab but facing the issue in runtime. Please suggest me where I am going wrong.
Thanks,
Madhurima

Hi Madhurima,
Have you checked if your PI version and patch level is being affected with this note 1933139 - Errors during execution of operation mapping with message mapping parameters names different from the operation mapping parameter names?
Regards.

Issue while creating Component Based Message Alerting in PI 7.31 Dual Stack

Hi,
We tried to implement Component Based Message Alerting following the steps mentioned in the below blog.
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/25/michals-pi-tips-component-based-message-alerting
Ours is PI 7.31 dual stack. However, after setting up the job with my own user id, I am getting the below error inside the log of Jobs tab:
javax.jms.JMSSecurityException: You do not have permissions: action alertingVP.queue and instance:name alertingVP.queue
action consumer
instance jms/queue/xi/monitoring/alert/ALERT-TO-MAIL
Please let us know what permission is required to set up the job.
Thanks,
Rahul

Hi,
Now I am able to receive alert in my mailbox. But it's coming with improper content.
I have set up the job at an interval of every 2 minutes in NWA, and in case if only 1 message fails in IE, in ideal case, I should receive only 1 message details in alert.
However, in every 2 minutes, I am receiving junk data and the number is increasing for the particular scenario for which the alert has been created. Also the Error Category mentioned is showing improper.
But in table SXMSALERTCONTENT I am able to view only the newly added failed entry.
An erroneous alert email content is pasted below:
63 messages failed for "Test_XXX" on "af.s0i.saps0i"
Root cause: -1
To navigate to the failed messages in the local message monitor use this link
The first 1 messages of that data collection:
"AdapterNamespace": "http://sap.com/xi/XI/System",
"AdapterType": "File",
"Channel": "FileSender_XXX",
"ChannelParty": "",
"ChannelService": "XXXXX",
"Component": "af.s0i.saps0i",
"ErrCat": "",
"ErrCode": "",
"ErrLabel": "-1",
"ErrText": "Configured source directory '\\Outbound\\XXX\\CREMAS' does not exist",
"FromParty": "",
"FromService": "XXX",
"Interface": "Z_CREMAS_SUSMM.CREMAS03",
"Namespace": "urn:sap-com:document:sap:idoc:messages",
"RuleId": "3a64dd6e1b1d3e58aff62ea70c97cb80",
"Timestamp": "2013-02-01T09:43:23Z",
"ToParty": "",
"ToService": ""
The failed message however do not relate to the 'source directory does not exist' issue. Please help.
Thanks,
Rahul

How to restart Java Engine in ABAP+JAVA dual stack installation ?

Dear Experts
if i use stopsap r3 in this dual stack installation - it stops both ABAP & JAVA Web Application Servers.
I want to restart only JAVA Weba pplication server.
How do it ?
Thaks in Advance !
Rgds

But theoritically they are 2 indpeendent installations like
AS ABAP
AS JAVA
..Do you aggree ?? really am not good on basics!!
During the installation also - if select AS ABAP & AS JAVA - it will become dual installation
and it does not show
any dependency while installing that AS JAVA requires AS ABAP.[Installation Component Selection and Dependency Screen shot|http://i303.photobucket.com/albums/nn153/S0002919350/SAP%20Issues/Oracle_Patches.jpg]
Installation Component Selection and Dependency Screen shot
Is it because if AS ABAP is down - AS JAVA UME is 001 client - and Java authentication fails ?
Can we de attatch from ABAP UME for my requirement like - running JAVA WAS alone w/o ABAP.
Regards
PR
Regards
Edited by: P.R. SRINIVAS on Jun 16, 2008 4:15 PM

PI 7.31 Dual Stack SSL configuration

HI Gurus,
I have a quick query, I am configuring SSL on my PI 7.31 systems.
I have checked all the standard guides and forums but I have one doubt.
Q1 - Is it necessary to configure SSL both in ABAP and JAVA side ?
Q2 - If I just configure SSL in STRUSTSSO2 in ABAP , will it be more than enough ?
Q3 - In what cases do we need to configure SSL in JAVA side ? And does configuring SSL in JAVA mandatory require sapcryptolib files ?
Please share your views.
Cheers, SG

I want to understand is it necessary to configure SSL in both ABAP and JAVA in case of dual stack PI ?
>>> Please refer to Huseyin's comments in the below thread..
PI 7.3 Dual Stack SSL configuration
In what cases do we use JAVA SSL in Dual stack system ?
>>> AFAIK - when you use http_aae adapter/soap with https then you should configure the SSL on java stack.

PI 7.31 Dual Stack Using BPM/BRM and ccBPM

Hello,
My client has decided to use SAP PI 7.31, because we have many ccBPM solutions, being used a long time, the idea is install the Dual Stack solution and keep using the ccBPM, at least for while.
But for the new integration solutions, we would like to use the AEX(Local AEX-Based) and connect to BPM and BRM, and maybe migrate the old solutions when possible.
Is it possible, use the both solutions( AEX/BPM/BRM and ccBPM) ? In this case, we will have all the benefits and great perfomance
when using the AEX/BPM/BRM(Local AEX-Based) solution, that we have in the single stack ?
Best regards,
Dylon.

Hi, vishal jain.
Thank you! Checking your link, we will probably choose the third case:
If PI is installed as dual-stack, then PO, PI and BPM/BRM, will have to be installed with different SIDs. PI on one SID and BPM/BRM on a different SID.
But the question remains... in this case is possible to use ccBPM and BPM/BRM, ok ?
And when using the BPM/BRPM, how is the performance and benefits ?
Are the same when using single stack solution ?
Best regards!

PI system upgrade from 7.1 to 7.4 dual stack

Hi,
We want to upgrade PI system to 7.4 .currently we are using PI 7.1 system (dual stack)and want to go for 7.4 dual stack.
which one single stack or dual stack is the best approach and what are the impacts normally see when upgrading to newer version.
We are planning to install 7.4 freshly recomonded by SAP .
We need to migrate objects from older system to newer system?
I want to know the process from basis perspective also .
Import/export or migrate is the best way to move objects from older sytem to newer system.
Please suggest me any links about the process including basis point of view also suggestions for the approach.
thanks,
aman

>>>> which one single stack or dual stack is the best approach and what are the impacts normally see when upgrading to newer version.
I would prefer single stack considering the SAP's future road map but of course it depends on how much effort your company is ready to spend. Incase you have lot of CCBPM's then you'll have to redesign them using Netweaver BPM if you go with single stack.
As are going with fresh installation(migration) of dual stack then you don't need to invest much.
>>> We are planning to install 7.4 freshly recomonded by SAP .
We need to migrate objects from older system to newer system?
I want to know the process from basis perspective also .
There is wizard using which you can move the directory objects ( classical scenario's to Integrated configurations). Please use it for ID objects
Refer to the below blog for more details. (ignore blog's title. it's applicable for dual stack-> dual stack too)
Moving Integration Directory Artifacts from dual stack to single stack
For ESR you can simply export and import the tpz file.
>>> I want to know the process from basis perspective also .
They can simply follow the installation guide and execute the post installation steps properly.

PI 7.30 dual stack - different time in rwb, pimon and ABAP stack

Hi @all,
I am working with the client on a PI 7.30 dual stack system.
During monitoring of message processing I saw that there are differences in the time displayed while monitoring the processing of identical messages
e.g. channelmonitor (mdt/channelmonitorservlet and rwb) is 1 hour behind pimon
The time displayed in the ABAP Stack (Menu System - Status) differs also 2 hours ahead of pimon.
Are there java parameters to configure the used time zone and which could be reason for this behaviour.
For me it seems strange that there is a difference between to tools (channelmonitor and pimon) I was supposing are based on the same technical stack
Would be nice to have the same time throughout the whole system.
Any help appreciated.
Best regards
Jochen

Hi Jochen,
I did not found the option to change the time zone for pimon. Please refer the below wiki it might helpful
PiMon_TroubleshootingGuide - Technical Operations - SCN Wiki
PiMon_Frequently Asked Questions - Technical Operations - SCN Wiki
regards.
Harish

EHP4 Dual stack

Similar Messages

Maybe you are looking for