EHP4 Install on ERP 6.0 with Netweaver 700

Can someone confirm for me. When installing ERP 6.0 EHP4 on an existing install do you have to include Netweaver EHP1?

You need approx. 100 GB additional space for shadow instance. The actual size depends upon your DB size but normally it should not grow more than 100GB. In my case (Oracle on HP-UX) the DB size was approx. 2.5 TB and I did a successful upgrade with an extra space of 100 GB.
Furthermore, if you are using EHP installer, it will calculate the space requirement and will warn you ( in case it needs more space) before start of the shadow creation.
regarding your earlier question of EHP4 install and EHP1 requirement -
SAP has released EHP1 to EHP4 for ERP 6.0 so obviously one should opt for EHP4 ( the highest one) for upgrade target. However for Java instance only EHP1 is released. So if you have a Java instance ( like a portal) you need to upgrade it to EHP1. If you have both ABAP and Java instance on the same system you need to upgrade ABAP to EHP4 and Java to EHP1. If you are using solution manager's MOPZ, it will show you correct files to download and correct upgrade targets provided you have done the correct configuration on SMSY.
Akhil Raizada

Similar Messages

  • Install SAP ERP 6.0 with Linux and Oracle RAC

    Hi Guru,
    I want to install SAP ERP 6.0 with Linux and Oracle RAC. Is this possible?
    Where do I find information?
    Thanks,
    Hugo.

    Hello Hugo,
    You can use either RAC or dataguard. On note [105047|http://service.sap.com/sap/support/notes/105047]:
    14. Data Guard
        o  You can use "Physical Standby".
        o  You cannot use "Logical Standby".
        o  You can use Data Guard Broker.
        o  You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
        o  In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
        o  Maximum Protection causes the primary database to terminate if problems occur in the standby database.
    60. Real Application Cluster (RAC)
        o  You can use this feature in accordance with Note 527843.
    Regards,
    Eduardo Rezende

  • Installing SAP ERP on DB2 with high availability

    Hey Gurus,
    currently we're installing SAP ERP 6 EHP 6 based on DB2 for unix and windows, this is done using the high availability option on AIX 7.1 and IBM's power HA.
    We have the following architecture:
              Node A:
                        1-A host for ASCS, ERS and CI.
                        2-A host for the DB instance.
    The same with node B replacing CI with DI.
    Please advise on how to proceed with installation.
    Also I need a bit of clarification regarding how to share (or export) the file systems between the hosts of the same node so that the CI can and DB can be connected, since as far as I know the DB installation will ask for the profile directory through the installation, while the CI will ask to see the db file systems as well as the db instance.
    Thanks in advance

    Hi Ahmed,
    For your query
    Also I need a bit of clarification regarding how to share (or export) the file systems between the hosts of the same node so that the CI can and DB can be connected, since as far as I know the DB installation will ask for the profile directory through the installation, while the CI will ask to see the db file systems as well as the db instance.
    Please refer installation guide sections related to file system planning.
    Here you can see the file system directory structure as well as information on which filesystems to be shared.
    Attached are some screenshot for reference
    Hope this helps.
    Regards,
    Deepak Kori

  • Install SAP ERP 6.0 with EHP7 - Inst Master ???

    Hi All,
             I've downloaded all necessary files need for EHP7 FOR SAP ERP 6.0 IDES Version.
    The downloaded files are listed below.
    NW 7.0 Presentation - 7.30 Compilation 3
    NW 7.0 Presentation - Adobe LiveCycle Designer 9.0
    RDBMS MSSQLSRV 2012 SP01 CU7 1/8
    RDBMS MSSQLSRV 2012 SP01 CU7 2/8
    RDBMS MSSQLSRV 2012 SP01 CU7 3/8
    RDBMS MSSQLSRV 2012 SP01 CU7 4/8
    RDBMS MSSQLSRV 2012 SP01 CU7 5/8
    RDBMS MSSQLSRV 2012 SP01 CU7 6/8
    RDBMS MSSQLSRV 2012 SP01 CU7 7/8
    RDBMS MSSQLSRV 2012 SP01 CU7 8/8
    SAP Kernel 7.41 Windows Server on x64 64bit
    IDES SAP ERP 6.0 EHP7 Inst. Export 1/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 2/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 3/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 4/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 5/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 6/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 7/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 8/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 9/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 10/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 11/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 12/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 13/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 14/14
    I don't find Inst.Master which is required to start up the installation. Where to download it and what specific version I need to download for EHP7 for SAP ERP 6.0 IDES ?
    Are there any JAVA COMPONENTS that I need to download before starting installation like Java Component BS2005SR3 or Java Component NW 7.0 SR3 ?? and SAP ERP 6.0 SR3 Components for EHP3 do we have similar components for EHP7 ?
    Can anyone tell me what type of collation I need to select when installing the MSSQL Server 2012 and which Operating system is best suitable for SAP IDES 6.0 with EHP7 on MSSQL Server 2012 ?
    I have JAVA from Oracle version 1.4.2 and policy file or whcih version of JAVA is suitable for installation ? Is it possible to do the install with latest JRE available ?
    Will appreciate rewards for best support.
    Regards,
    Gowri Shankar

    Hi Tomas,
    Good day, as per you advice. I manage to go thru the IDES installation but its stuck on 19 of 34 (Import ABAP) with error code 2.
    Below are the text written in ECC Message Box.
    An error occurred while processing option SAP Business Suite 7i 2013 Support Release 1 > EHP7 for SAP ERP 6.0 ABAP Support Release 1 > Oracle > SAP Systems > Application Server ABAP > Standard System > Standard System( Last error reported by the step: Process call 'D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.). You can now:
    Choose Retry
    to repeat the current step.
    Choose Log Files
    to get more information about the error.
    Stop the option and continue later.
    Log files are written to C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP.
    Below are the logs from R3load.exe:-
    sapparam: sapargv(argc, argv) has not been called!
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20141006062234
    D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/741_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
    D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: version R7.40/V1.8 [UNICODE]
    Compiled Nov 23 2013 13:31:32
    -------------------- Start of patch information ------------------------
    patchinfo (patches.h): (0.009) Support for SUM/ZDM and DMO (note 1778564)
    DBSL patchinfo (patches.h): (0.011) DBSL error corrections in 7.41: (4) LOBs (note 1928526)
    --------------------- End of patch information -------------------------
    process id 4612
    DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
    (DB) ERROR: db_connect rc = 256
    DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
    (DB) ERROR: DbSlErrorMsg rc = 29
    D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
    D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20141006062234
    I've created new thread for this issue at Error in SAP installation in phase 19 of 34 - Import ABAP
    Looking forward for your reply.
    Regards,
    Jay
    -96-
    Message was edited by: Jay Jay

  • Install new ERP & EP Witch version?

    hello,
    I have to install an ERP and i have that there are 2 version now to order : ERP6 SR3 based on NW7 and EHP4 ERP6 based on NW7.01.
    Like the fonctionnal seem to say that we needn't EHP i will choose ERP6 SR3
    Fisrt question : if i install the SR3 on withch level of support package i will be ?
    I have also to install the SAP Portal.
    I have see that the portal exist in 2 version : Netweaver 7 and Netweaver 7.01
    What is the version i have to choose? I uspose the functionality are not the same but like i will install ERP6 based on NW  07 i supose i have to install EP based on NW07 too?  is it correct?
    Thx for your help.
    Regards
    Edited by: BABY Fabrice on Sep 2, 2010 12:33 PM

    Hi,
    If you don't want to install latest ERP 6.0 EHP4 then install ERP 6.0 SR3 and install it with latest support packages. I always install system with one stack lower than the latest available i.e. n-1 approach.
    As far as portal is concerned, since your ECC6.0 is based upon netweaver 700 release then install portal with netweaver 700 release only.
    Thanks
    Sunny

  • How to change minimum data size of MaxDB while installing SAP ERP 6.0

    I am installing SAP ERP 6.0 with MaxDB on a Linux system.
    The installation document says the minimum size of SAP data is 70 GB.
    But while installing the minimum Data size is showing as 240000 MB (240 GB).
    On what parameter/system attribute this value of "Minimum data size" depends?
    If possible how can we change this value?

    Hi Deepak,
    I created these on three LVM logical volumes on Linux.
    But while installing in "Create database instance" phase I got below error:
    Error in log file:
    class com.sap.sdb.sllib.utils.DbCommand | <DBMException -24988 ERR_SQL SQL error
    -902,I/O error
    3,Database state: OFFLINE
    6,Internal errorcode, Error code 9050 "disk_not_accessible"
    20030,Formatting of data area failed>
    What could be the reason behind this? is it because I used logical volumes instead of raw disks OR
    the size of logical volumes?
    I created 3 logical volumes. two of them with size 125GB each and one with 30 GB.
    What should be the appropriate size of each volumes for minimum data size 240GB?
    Regards,
    Swap

  • ERP 2004 SR1 with Oracle: unable to allocate MINEXTENTS

    Hello Everybody,
    I'm trying to install SAP ERP 2004 SR1 with Oracle on Debian Sarge (I know that it is not supported). The installation was prety straight forward. But now in the step "Database Load (Post processing)" i get this Errors:
    /tmp/sapinst_instdir/ECC_50_ABAP_NUC/DB/SAPSSEXC.log:
    (DB) ERROR: DDL statement failed
    (CREATE  INDEX "T100~001" ON "T100" ( "ARBGB" , "MSGNR"  ) TABLESPACE PSAPIDS640 STORAGE (INITIAL 363889471 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
    DbSlExecute: rc = 99
      (SQL error 1659)
      error message returned by DbSl:
    ORA-01659: unable to allocate MINEXTENTS beyond 17 in tablespace PSAPIDS640
    (DB) INFO: disconnected from DB
    /tmp/sapinst_instdir/ECC_50_ABAP_NUC/DB/SAPAPPL2.log:
    (DB) ERROR: DDL statement failed
    (CREATE UNIQUE INDEX "T512G~0" ON "T512G" ( "MANDT", "SPRSL", "MOLGA", "FORML", "WINDO", "GRPPE", "KENNZ", "LFDNR" ) TABLESPACE PSAPIDS STORAGE (INITIAL 11615742 NEXT 0000000080K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
    DbSlExecute: rc = 99
      (SQL error 1659)
      error message returned by DbSl:
    ORA-01659: unable to allocate MINEXTENTS beyond 4 in tablespace PSAPIDS
    (DB) INFO: disconnected from DB
    /tmp/sapinst_instdir/ECC_50_ABAP_NUC/DB/SAPSLEXC.log
    (DB) ERROR: DDL statement failed
    (CREATE  INDEX "DDFTX~1" ON "DDFTX" ( "ROLLNAME"  ) TABLESPACE PSAPIDS640 STORAGE (INITIAL 52072826 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
    DbSlExecute: rc = 99
      (SQL error 1659)
      error message returned by DbSl:
    ORA-01659: unable to allocate MINEXTENTS beyond 24 in tablespace PSAPIDS640
    I think the tablespace is to small. Which commands do I need to extend them? I've alredy tried:
    su – oraids
    sqlplus /nolog
    connect / as sysdba
    SELECT * FROM DBA_TABLESPACES WHERE TABLESPACE_NAME = 'PSAPIDS';
    ALTER TABLESPACE PSAPIDS DEFAULT STORAGE
    (INITIAL 11615742 NEXT 0000000080K MINEXTENTS 0000000001 MAXEXTENTS 2347483645 PCTINCREASE 0);
    Hope that anybody can help me out. I will publish the installation instructions here on SDN.
    Regards
    Gregor

    Hi Gregor.  The text of the Oracle message ORA-01659 is as follows.  As you can see it recommends adding a data file first.
    01659, 00000, "unable to allocate MINEXTENTS beyond %s in tablespace %s"
    // *Cause:  Failed to find sufficient contiguous space to allocate MINEXTENTS
    //          for the segment being created.
    // *Action: Use ALTER TABLESPACE ADD DATAFILE to add additional space to the
    //          tablespace or retry with smaller value for MINEXTENTS, NEXT or
    //          PCTINCREASE
    The syntax for adding a datafile would be
    alter tablespace PSAPIDS add datafile '/your/path/psapids99.dbf' size 100m;

  • CRM 5.0 Compatibility with backend upgraded to EHP4 FOR SAP ERP 6.0 / NW7.0

    Hello,
    What are the  compatibility issues for EHP4 FOR SAP ERP 6.0  Upgrade with CRM 5.0 ? Are there any OSS notes to address upgrade specific issues?
    Following are the System Details:
    Upgraded EHP4 FOR SAP ERP 6.0 / NW7.01
    Component: SAP_APPL 
    Release:      604
    Support Pack: SAPKH60402
    Level:  0002
    Existing CRM 5.0
    Component:     BBPCRM
    Release: 500
    Support Pack: SAPKU50006
    Level: 0006
    Thanks,
    AG
    Edited by: Arijeet Ganguly on Sep 15, 2009 11:49 PM

    Hi Amirsd,
    You will need to use your Solution manager system to apply EHP 4 to your newly installed system.
    Use MOPZ to generate XML file which contains the packages to be downloaded to upgrade your current system to EHP 4.0
    After that download EHPI tool from SAP Marketplace and use EHPI tool to install downloaded packages.
    It would run in 7 phases including downtime phase.
    Let me know if you have any queries. !!!!
    Regards,
    Shobhit Garg

  • How to access Views of ERP with Netweaver BPM?

    Hello,
    i want to create an example-application with Netweaver BPM and Visual Composer.
    For this, more employees should share the creation of a new Material in an ERP Backend.
    Every emplyoee should enter data of a different View of MM01 ! (like Basic Data, Sales..., Purchasing., ..)
    I thought about using the Service "Create Material Basic Data" but there are only little options for the data you can enter
    (only InternalID, Base Units, Description...).
    So my question is, how can i get access to the usual views of MM01 with Netweaver BPM and Visual Composer?
    Or how can i enter more Materialdata with Webservices?
    Thanks for your help,
    Oliver

    What you could also do is make use of MDM Webdynpro Components since your intention is probably to update master data at the end you can use MDM Webynpro Components and then use them a webdynpro application. Use the webdynpro component in the BPM Process in return or use the option given in the previous reply as well.
    http://help.sap.com/saphelp_nwmdm71/helpdata/en/4a/387eb4a7ea1ca2e10000000a42189c/content.htm
    Link to MDM WD Comps

  • Installing BI 4.1 with Netweaver Web Application Servers : Windows/HP-UX

    Hello,
    We are about to install SAP BI 4.1 SP3, with Netweaver as Web Application Servers.
    And yes, according to the Product Availability Matrix HP-UX is definitely not a supported platform .
    The problem is that our company like many others have invested huge amount of money in their HP-UX infrastructure,
    and intend to reuse it, as long as it is supported by SAP.
    OK it is very confusing, let me clarify
    After discussing with other SAP customers facing the same dilemma :
    We intend to :
    * Install the Oracle Database (hosting CMS and Audit schema) on HP-UX ( The PAM only says that the Database Connector is not Supported on HP-UX)
    * Install BI.4 Server Components Application/Intelligence layer on Windows as clearly indicated in the PAM
    * Install Netweaver Application Servers on ...HP-UX if supported by SAP ?  I have some problems reading the PAM regarding this last point
    The PAM seems to indiccate that HP-UX is not supported as a platform for NEtweaver,
    but then on the next page it says :
    (*3) SAP NetWeaver is supported with SAP JVM on all supported operating systems
    What does that mean ???
    SAP Netweaver/SAP JVM is supported on HP-UX
    Does that mean that we could install NEtweaver JAva Stacks on HP-UX ?
    Thanks and Regards

    Hello,
    We just received SAP Support  answer, Deploying BI4 Applications on Netweaver/HP-UX
    is ... SUPPORTED !
    "Thank you very much for your time on call today.
    --As discussed you already have installed SAP NetWeaver Java
    Application Server on HP-UX Operating System.
    --Now want to deploy BOE Web Applications (Ex- CMC, BI Launchpad) on
    top of this.
    --Yes, it is supported to deploy BI Web Applications on SAP NetWeaver
    Java Application Server on HP-UX Operating System."

  • EHP4 FOR SAP ERP 6.0 / NW7.01

    I am new to SAP and have successfully Installed SAP ERP 6.0/NW 7.01 on Windows Server 2008 R2 with Oracle 10g. We would like to go ahead and apply the enhancements Package 4 to ERP 6.0 (SAP Enh. Package 4 for SAP ERP 6.0 1). I have no knowledge on how to install Enhancement packages.
    Can someone please guide me on what is needed. What program or utility I can use to apply the EHP4. Any tips or direction would be would be nice.

    Hi Amirsd,
    You will need to use your Solution manager system to apply EHP 4 to your newly installed system.
    Use MOPZ to generate XML file which contains the packages to be downloaded to upgrade your current system to EHP 4.0
    After that download EHPI tool from SAP Marketplace and use EHPI tool to install downloaded packages.
    It would run in 7 phases including downtime phase.
    Let me know if you have any queries. !!!!
    Regards,
    Shobhit Garg

  • Install The ERP SAP Best Practices Baseline Package (VE)

    Hello
    We would like to install The ERP SAP Best Practices Baseline Package (VE)
    And reviewing the  Quick Guide to Installing the SAP Best Practices Baseline Package (VE), included in the SAP NOTE 1171816, in the list of components installed we need SAP ERP 6.0 with EhP3 with support package stack 1, but we received the installation disc of the Ehp4, and this version is not supported for the Baseline Package (VE).
    We are unable to find the installation the disc, or the media list for this solution (SAP ECC 6.0 EhP3).
    Can somebody tell me where can i find this?
    The information in the service.sap.com/instguides is about installing EhP4.
    We are using Windows 2008 EE with MS-SQL 2005.
    Thanks for your Help

    Hello Sunny,
    I hava setup MOPZ, and uploaded the correct packages to the SAINT transaction, but it gives me a warning, i need to include the following files to my upgrade queue:
    EA-APPL, 603       SAPK-603DHINEAAPPL   (SP Level: 0001)
    FINBASIS, 603      SAPK-60301INFINBASIS (SP Level: 0001)
    EA-PS, 603           SAPK-603DHINEAPS     (SP Level: 0001)
    SEM-BW, 603        SAPK-60301INSEMBW    (SP Level: 0001)
    I downloaded the packagesfrom SWDC but still is missing EA-PS, 603 SAPK-603DHINEAPS the file i downloaded was CSN0120061532_0028760.PAT
    In the SAP Note 1083533
    "If you receive the warning stating that additional Support
    Packages (level 0001) must be included in the installation of
    Enhancement Package 3, check the Support Package level of the
    relevant component. You can ignore the warning in the following
    cases:
    All components (Release 600) except EA-HR 600: Support Package
    level 0011
    EA-HR 600: Support Package level 0026
    - Note the following: In the case of a higher Support Package
    level (at least Support Package level 0012 or Support Package
    level 0026 for EA-HR), you must NOT ignore this warning."
    My SP level is 11 for all components and EA-HR is lvl 22, should i ignore this?
    Kind Regards

  • ECC 6.0 with NetWeaver Ehp 1 without Ehp 4

    Hello
    Is this combination possible?
    ECC 6.0 with NetWeaver Ehp 1 without Ehp 4
    Thank you very much!

    That combination is not possible.  The information below is taken from http://www.sdn.sap.com/irj/sdn/nw-70ehp1.
    Regards,
    John
    What is the implementation strategy for SAP Business Suite?
    With the unrestricted shipment of enhancement package 1 for SAP NetWeaver 7.0, only implementations within standalone installations of SAP NetWeaver 7.0 are supported (e.g. for BI, EP, etc.).
    For existing installations of SAP Business Suite systems (i.e. SAP ERP 6.0, SAP CRM/SRM/PLM, ...) etc.) that are based on SAP NetWeaver 7.0, the SAP enhancement package 1 for SAP NetWeaver 7.0 shall not be installed separately, as it will result in malfunctioning of the installation procedure and/or the final system state.
    Business Suite 7 (generally available since May 5th, 2009) is technically based on the SAP enhancement package 1 for SAP NetWeaver 7.0. All relevant parts of enhancement package 1 for SAP NetWeaver 7.0 are included in the respective SAP Business Suite 7 installation routines and will be installed automatically underneath the SAP Business Suite systems when an upgrade to SAP Business Suite 7 is performed. More information is available in this overview presentation, more details can be found at the service marketplace quick- link /ERP-EHP (SMP login required).
    General note on the relation of enhancement packages for SAP Busiess Suite and SAP NetWeaver:
    Customers who have implemented certain enhancement packages for SAP Business Suite might have to implement a certain enhancement package for SAP NetWeaver 7.0 as well. Please refer to the respective documentation of the SAP Business Suite for details.

  • Installing SAP ERP Net Weaver application server

    Dear,
    I am newcomer in SAP ERP industry, so i would like to practice more at home after which i learned in University.
    I want to install SAP ERP application at home which is run offline ( which could be adjusted as i want ) not via web browser like I am usually doing that.
    I have workstation laptop , I think it will run well.
    Or you can instruct me more.
    Thanks all

    Hi Binh,
    You could check with SCN thread Step by Step Installation Guide for SAP NetWeaver AS ABAP 7.02 SP6 32-bit Trial Version
    Getting started with Netweaver 7.3 portal Part 1-Installation
    Hope this will also help you.
    Good luck !!

  • Error instalation SAP ERP 6.0

    Hi colleagues:
    I am trying to install an ERP 6.0 on a windows server 2003 and SQL Sever. The problem I have is that on phase 20 of 24 (Starting) the systems prompts me an error. It seems that it cannot start. Ihave tried to restart again but the problem still exits.
    I have another instance in the system but it does not seem a problem of memory. Iu00B4ve checked the logs of the different processes and I think that is a problem of the database, the processes cannot connect to it, and therefore makes a problem of login.
    The content of the log is:
    B Mon Jun 16 09:41:15 2008
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\DES\DVEBMGS00\exe\dbmssslib.dll' ...
    B  Library 'C:\usr\sap\DES\DVEBMGS00\exe\dbmssslib.dll' loaded
    B  Version of 'C:\usr\sap\DES\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
    B  New connection 0 created
    M sysno      00
    M sid        DES
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    75
    M intno      20050900
    M make:      multithreaded, Unicode, optimized
    M pid        1868
    M
    M  kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
    M  length of sys_adm_ext is 572 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 9 1868) [dpxxdisp.c   1299]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M 
    M Mon Jun 16 09:41:16 2008
    M  DpShMCreate: sizeof(wp_adm)          18304     (1408)
    M  DpShMCreate: sizeof(tm_adm)          3994272     (19872)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    M  DpShMCreate: sizeof(comm_adm)          528064     (1048)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1440)
    M  DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 07FE0040, size: 4653368)
    M  DpShMCreate: allocated sys_adm at 07FE0040
    M  DpShMCreate: allocated wp_adm at 07FE1E40
    M  DpShMCreate: allocated tm_adm_list at 07FE65C0
    M  DpShMCreate: allocated tm_adm at 07FE65F0
    M  DpShMCreate: allocated wp_ca_adm at 083B5890
    M  DpShMCreate: allocated appc_ca_adm at 083BB650
    M  DpShMCreate: allocated comm_adm at 083BD590
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 0843E450
    M  DpShMCreate: allocated gw_adm at 0843E490
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 0843E4C0
    M  DpShMCreate: allocated wall_adm at 0843E4C8
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 9 initializing ....
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  ThInit: running on host sap470
    M 
    M Mon Jun 16 09:41:17 2008
    M  calling db_connect ...
    C  Thread ID:380
    C  Thank You for using the SLOLEDB-interface
    C  Using dynamic link library 'C:\usr\sap\DES\DVEBMGS00\exe\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    patchlevel   0
    C    patchno      72
    C    patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
    C  np:(local) connection used on SAP470
    C  CopyLocalParameters: dbuser is 'des'
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'SAP470\SAPServiceDES'.
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'SAP470\SAPServiceDES'.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'SAP470\SAPServiceDES'.
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'SAP470\SAPServiceDES'.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'SAP470\SAPServiceDES'.
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'SAP470\SAPServiceDES'.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  failed to establish conn to np:(local).
    C  Retrying without protocol specifier: (local)
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'SAP470\SAPServiceDES'.
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'SAP470\SAPServiceDES'.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C 
    C Mon Jun 16 09:41:18 2008
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'SAP470\SAPServiceDES'.
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'SAP470\SAPServiceDES'.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'SAP470\SAPServiceDES'.
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'SAP470\SAPServiceDES'.
    C  Procname: [OpenOledbConnection - no proc]
    C  sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
    C  Procname: [OpenOledbConnection - no proc]
    C  failed to establish conn. 0
    B  ***LOG BY2=> sql error 0      performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh    1204 ]
    B  ***LOG BY2=> sql error 0      performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10156]
    M 
    M  Info for wp 9
    M 
    M    stat = 4
    M    reqtype = 4
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = V-1
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server sap470_DES_00 on host sap470 (wp 9)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Mon Jun 16 09:41:18 2008
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10354
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 9 1868) [dpnttool.c   327]
    Thank u a lot.

    Hi anil:
    Yes, I have them already installed, and I also have another system running in the machine, so i do not think that this is the problem.
    Do you have any other idea??
    Thanks a lot.

Maybe you are looking for