Ejecting W520 from the docking station

Hello everybody,
This is a very silly question, but there in no eject button on the docking station for W520. I wonder what are the best practices to eject a laptop safely?
Thanks so much.
Solved!
Go to Solution.

I wonder what are the best practices to eject a laptop safely?
Wasabi:
I used to encounter problems ejecting my W500 from its docking station, even when I did everything correctly.  As a result, I got into the habit of shutting the darn computer off (completely), then ejecting it.
In his post above, Thetiv states that the W520s might be different, and might not have such complications when they are ejected.  Quite possibly this is true, however, once bitten, twice shy...  My personal 'best practice' is to turn the darn thing off before ejecting it.
Michael
W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

Similar Messages

  • HT1473 How do I get a purchased song to play on my ipod shuffle remote from the docking station?

    How do I get a purchased song to play on my ipod shuffle remote from the docking station?

    I can think of only one reason a song would be "converted" while it is being loaded on a shuffle.
    Select the iPod in the iTunes sidebar, under DEVICES.  Over to the right, depending on iPod model, go to the Summary or Settings tab.  There should be a setting there that says Convert higher bit rate songs to 128 kbps AAC (the 128 kbps part may be adjustable).  If that checkbox is checked, try unchecking it.
    NOTE:  This setting may allow more songs to fit on the shuffle, but for any converted song, the sound quality will become inferior.  So I don't use it.

  • X220 with mSATA ssd always freezes when docks/undock from the docking station

    When I try to dock or undock the X220, the laptop freezed, nothing esle you can do but reboot the computer.
    It's really annoying. the laptop works fine if you don't do the dock/undock when it's running.
    I think the BIOS should be the latest one.
    Docking: ThinkPad 0A33932 for X220
    Laptop: X220I5-25404G80G(msata)+320GWin7Pro-32
    Is anyone here who have the same problem or any suggestions?
    Any reply appreciated.
    Regards,
    Sven

    Hello,
    A few things to check:
    Make sure that both the X220 and the mSATA SSD have the latest BIOS/firmware installed
    Make sure X220 has latest ThinkVantage device drivers and Microsoft OS updates installed
    Try running a CHKDSK on the SSD
    Even if those don't solve the problem, knowing that you've checked them will help rule those out as issues.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • I can't get my ipod touch to slide all the way down on a docking station.  The ends the stick up on the docking station seem to prevent it from going all the way down.  What do I do?

    I can't connect my ipod touch to a docking station.  The ends stick up on the docking station connection piece.  I believe that is what is preventing my ipod from sliding down all the way.  What am I doing wrong?

    Similar issues here.
    I purchased five movies for download and having nothing but problems getting them downloaded. I keep receiving error messages and the download stops and I have to restart it, just to get another minute worth of download with each restart. Now Apple has my money and I have nothing.

  • I just bought an IPOD Touch 5th and just realized that there is no place  to insert it into a Bose Docking Station to play the music from the IPOD thru the Bose, any suggestions.  The 4th Generation had a larger hole to connect to the docking station.

    I just purchased a new IPOD Touch 5th and use a BOSE Docking Station.  I just realized this new IPOD does not have the hole in the bottom to
    place it on the Docking Station like the IPOD 4 did.  Do you have any suggestions?  Does this not dock?

    There are adapters that are available in the iTunes store.
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=72
    and
    http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m?fno de=72

  • Connecting/Disconnection from the Dock

    Greetings,
    An 'operational' question here. With my old (non-mac) MP3 player, I would just leave the USB cable plugged into the port at the back it the iMac display and connect and disconect the player from the free end of the cable when necessary.
    Can I do this with the Shuffle? That is to say, can I leave the Docking Station plugged into the iMac all the time, and just plug the Shuffle into the Dock when I need to charge or change music?
    Thanks for any input.

    HarveyJ wrote:
    Can I do this with the Shuffle? That is to say, can I leave the Docking Station plugged into the iMac all the time, and just plug the Shuffle into the Dock when I need to charge or change music?
    YES ... It's what I do.
    Also, it's good practice to EJECT the shuffle in iTunes before removing it from the dock

  • IPod freezes when playing from a docking station...Any ideas about a fix?

    I have had my current iPod for a couple of years now, and until recently it has worked flawlessly. Over the past couple of months a problem has develoed when I play my iPod from a docking station. When I play the iPod from it's cradle (connected to my HK Soundsticks) or from my JBL Speaker Base, the iPod plays fine for the first few songs. After a few songs, the iPod stops in the middle of song and skips to the next song, then skips three of four times without playing at all and utltimately locks up completely. The problem seems to arise when I am simultaneously playing and charging.
    Any ideas?
    I am using a 40mb, clickwheel, iPod.

    All I can suggest is to re-encode the video as m4v with QT Pro, there might've been a problem in encoding. Also, try sending this same video (setting TV Out to Yes) with the iPod not plugged into the dock and with an Apple RCA cable, if you have one, hooked up to a TV. If that works, the dock connector might be damaged (unlikely) but it's possible. So once you've re-encoded, see if the dock situation works then. Good luck.

  • How do you play the radio with an iPod and the docking station model RDP-M5iP

    I purchased an iPod docking station model RDP-M5iP and I cannot play the radio.  It says to plug in the headphones for radio reception but that does nothing.  Is there any way to use the radio portion of the iPod with this model?

    Hello Roger,
    Welcome to Sony Community.
    This Personal Audio Docking System does not have built in radio and it seems you are playing radio from the connected iPod and wish to get the audio from Docking System Speakers. You may try checking the radio reception in the iPod. Also, you may try to playback music in the iPod and check if audio is output from the Docking System Speakers.
    Regards,
    Colby

  • Is it possible to plug ipad 2 with the smart cover on the dock station?

    I'm wondering if the dock station can be used while Ipad2 is covered by the SmartCover?
    Thank in advance for answers !
    Greetings from France

    I before I bought my case for my iPad2 I had the cover on it, in order to get it in the dock I had to slightly open the cover to seat the iPad on the dock then I could close it again. There is not enough room in the cradle to hold the iPad with the cover closed (tight fit without the cover), but I did not have to remove the cover to put it in, just open it.

  • My itunes doesn't open from the dock... when I get it open by spotlight it froze when I was trying to burn a CD.

    My itunes doesn't open from the dock... when I get it open by spotlight it froze when I was trying to burn a CD.

    Hi stork38,
    Welcome to the Support Communities!
    It sounds like the application is having an issue burning the CD.
    I would suggest you Force Quit iTunes, eject the disc and then open iTunes again.
    Then try burning again with a different CD.
    Mac OS X: How to quit an unresponsive application using Force Quit
    I hope this information helps ....
    Have a great day!
    - Judy

  • HT4528 I pulled my iPhone out of the docking station/speakers and now the ring tones don't work.  Anyone know a fix for this?

    Does anyone know if there is a fix for iPhone 4S when you pull it out of the docking station and now the ring tones don't work -- it only vibrates.

    Basic troubleshooting of the device is reset, restart, restore (first from backup then as new).  Has any of this been tried?
    Do other sounds work?
    Have you checked to see if the dock connector or headphone jack have debris in them?

  • HT1339 my ipod nano 7th generation....works fine as long as it's on the docking station. when off the station, the display goes dark after a few seconds. it's fully charged. please help. this is the heartbeat of my business. thanks

    my ipod nano 7th generation....works fine as long as it's on the docking station. when off the station, the display goes dark after a few seconds. it's fully charged. please help. this is the heartbeat of my business. thanks

    In the worst case, it's still under warranty (all 7th gen nanos are still under one year from purchase).
    So, you disconnect it from power, and it almost immediately goes dead?  You can try a Restore... but it doesn't sound like the type of problem a Restore will fix.
    You should probably have it looked by Apple Tech Support.  If there's an Apple Store nearby, you can take it to the store's Genius Bar.  To avoid waiting, you can make a reservation at the store's web page
    http://www.apple.com/retail/

  • I put my iPod on the dock station but the volume dose not play?

    I put the volume on my iPod and when I put it on the docking station I hear no music I saw that the volume controller disapeared now I can't hear my music

    Downgrading the iOS is not supported by Apple.
    Go to the dock manufacturer's support site and se if they have any suggestion or if a firmware update is available for the dock
    Sometimes this works:
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • No sound from xb4 Docking Station

    Using the HP Entertainment PC with the xb4 Media Docking Station.  Can not get the mute button to turn off on the docking station. It will control the notebook volume and mute buttons, but will not turn it off on the station.  The notebook sounds great until it is plugged into the station, and it becomes silent.  No sound coming from the speakers at all. Purchased the entire package 4 months ago, talked with hp tech. support for several hours, and just received the third docking station today yet I'm still having the same problem.  The second docking station worked great for about 2 months, then the computer was disconnected and once the computer was reconnected the problem emerged.  The first and third stations had the problem from the first connection.  The only thing plugged into the station is the power adapter. 
     Please if anyone can help, it would be greatly appreciated!! 

    I do suffer the same pain, i just received the (XB4) replacement from Hp, because I've been having the same problem, and after hours with tech support finally they agree to send it!!! and guess what...... the same old history, no sound come out, the funny thing is that my wife has one xb4 too, and we had been doing all kind of trouble shooting tests and my wife's docking st. works perfect, now I can't express my how far my frustration has reached.
    Anyway I do recommend to send your Docking Station + Replacement Docking Station and get your Money back or exchange it for some other product, because I really and strongly believe that my time is more important and valuable than dealing with this kind of issues where i paid for a quality product and it results not to be, and/plus uses my time in order to figure out how to fix it (i don't think so!!!).
    This is a Bad one Hp, i like your products, but this one really got me out my nerves.
    Have a nice day, and hope to hear something helpful from HP soon

  • What is the diferencie between the dock stations MFG#A9B77U​T#ABA and MFG#A9B77A​A#ABA ?

    What is the diference between the dock stations MFG#A9B77UT#ABA and MFG#A9B77AA#ABA ?

    Hi,
    The UT is cheaper . Both are for HP 2570 laptops.
    You can compare from the following links:
      http://h30094.www3.hp.com/product.asp?sku=10445823
      http://h30094.www3.hp.com/product.asp?sku=10445822​&mfg_part=A9B77AA&pagemode=ca
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Material for learning OA Framework

    Hi, I need a material to learn OA Frameworks from the Basics. Can anybody help me out in this issue. Thanks

  • Connectivity through Xml

    hey can anybody tell me the difference in compiling from a flex builder and through command line compiler.... i have a mxml app which is connected to the Xml file.. and it displays the result on the datagrid...When i compile this code and run the app

  • Require information about the Role of Data Analyst

    Hi All, I know this might be irrelevent question in this forum, but after a long search, I could not find any suitable place where I can get the information about the role of Data Analyst ( DA ). What all activities the DA needs to perform? Can anyon

  • EPMA shared dimension Aliases

    Hi, We have a EPMA application where few of our dimensions are shared. Our flat file imports have loaded the aliases to one of the dimesnsions to the shared library and everything is in sync with the application. . But we are not able to see those al

  • Creating an Infix Calculator using Stacks

    Hi, I am writing code that parses an infix expression input from the user (seperated by white spaces). I have to use stacklist class. using stringtokenizer to parse the expression. have to ignore left paren, push operators into opStack push operands