EL !empty gives "unexpected (unary) operation" found error

I'm running JDeveloper 11.1.2.3.0 to develop an ADF Mobile app.
I want to set the rendered property of an output text element to #{!empty pageFlowScope.MyBean.myString}. However, this gives me the error:
Threw Exception: ELException: EL Parsing Error: unexpected (unary) operation found -- [column 8] #{!empty pageFlowScope.MyBean.myString}
How can I set the rendered property of a component so that it is only rendered if the referenced String is not null and not empty?
Many thanks.

can your try something like below?
#{pageFlowScope.MyBean.myString==null?false:true}
or empty string
#{pageFlowScope.MyBean.myString==''?false:true}
or combined
#{pageFlowScope.MyBean.myString==null?false:true || pageFlowScope.MyBean.myString==''?false:true}
//render off if condition is true

Similar Messages

  • External Catalog gives HTTP 404 not found error on return

    Hi,
    I have an SRM 4.0 that I am running with an external ITS.  I have two systems that are almost exactly the same.  When I shop with a particular external catalog in one system, it works fine.  When I shop in the other system, I can get to the catalog and shop OK, but when I try to return the items to my cart, I get a 404 not found error.  I have reviewed the HTML source being sent back to both systems and can identify no differences.  I have scoured the config and it is exactly the same.  There are no other error messages anywhere in the broken system.  There are other external catalogs in that system that work fine.  I know I am overlooking something but can't seem to figure out what.  Any suggestions to alleviate this most frustrating problem are greatly appreciated.
    Many thanks,
    Kris

    Hi
    <u>What are the steps you doing to reproduce this error in the system? Please give complete details.</u>
    <b>Meanwhile, please look for following SAP OSS Notes as well -></b>
    Note 576530 - Page cannot be displayed
    Note 763955 - Error when resubmitting or forwarding
    Note 851106 - Search in catalog from SRM leads to "Service not reachable"
    Note 869716 - Package and SICF node missing for AP SICF services
    Note 961775 - Missing 1x1.gif - HTTP 404 Error - File Not Found
    Note 991863 EBPMSG service not available in transaction SICF
    Do let me know.
    Regards
    - Atul

  • Windows will not boot to my boot camp partition on a DIY fusion drive - gives "No bootable device found" error

    I have a MacBookPro 9,1 (mid-2012, non-retina) running OS X 10.8.2.  Here is what I have done to my system:
    Installed Windows 7 x64 Pro to a boot camp partition; installed all windows updates.
    Using WinClone, save an image of this boot camp partition.
    Removed optical drive and HDD.
    Installed HDD in place of optical drive.
    Installed SSD in place of HDD.
    Booted to recovery partition, installed OS X on a flash drive.
    Booted to flash drive, created fusion drive using [MacWorld's instructions](http://www.macworld.com/article/2014011/how-to-make-your-own-fusion-drive.html)
    Booted to recovery partition on flash drive.
    Restored system to fusion drive from a Time Machine backup. Unfortunately, it seems that because I never installed OS X on my fusion drive, I do not have a recovery partition. But that's an issue for another day.
    Using Boot Camp assistant, created a boot camp partition on my HDD.
    Using WinClone, restore my Windows installation from the previously created image.
    Now, Windows boots to a black screen telling me that it can't find a bootable device. I have tried a few things to resolve this, all without effect:
    I know that VMware Fusion has to prepare a boot camp partition in order to virtualize it, so I figured it might inadvertently fix things. Alas, while it *did* successfully boot my boot camp partition into a virtual machine, I still can't boot into Windows.
    I figured I'd just try to reinstall Windows. Surprisingly, my system booted to my Windows install disc, which was in my original optical drive (which I had put in a USB case). But, Windows refused to install, giving me a an error 0x8030024. It seems the solution to this issue is to disconnect all drives but the one on which you want to install Windows, which is something I would dearly like to avoid. It would be a pain, but more than that, I'm afraid it would bork my fusion drive, even if I'm careful to never boot to OS X with the SSD disconnected.
    A lot of places said that this error results from a borked MBR, and suggest using a tool like gptfdisk to rewrite it. I followed the instructions [here](https://discussions.apple.com/thread/4144252?start=0&tstart=0), but *that* didn't work either.
    I am now completely at a loss as to how to proceed, and Google isn't much help either.
    In conclusion, here is some information that you may find helpful:
        $ diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *240.1 GB   disk0
       1:                        EFI                         209.7 MB   disk0s1
       2:          Apple_CoreStorage                         239.7 GB   disk0s2
       3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *750.2 GB   disk1
       1:                        EFI                         209.7 MB   disk1s1
       2:          Apple_CoreStorage                         648.4 GB   disk1s2
       3:                 Apple_Boot Boot OS X               650.0 MB   disk1s3
       4:       Microsoft Basic Data BOOTCAMP                100.9 GB   disk1s4
    /dev/disk2
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS Mayfly                 *884.0 GB   disk2
    $ diskutil cs list
    CoreStorage logical volume groups (1 found)
    |
    +-- Logical Volume Group 63DC419F-1A09-4C5B-977A-F59F79502CA1
       =========================================================
       Name:         FusionDrive
       Size:         888087773184 B (888.1 GB)
       Free Space:   0 B (0 B)
       |
       +-< Physical Volume B1B14251-2DB3-491C-9E7A-5C2FD11881BA
       |   ----------------------------------------------------
       |   Index:    0
       |   Disk:     disk0s2
       |   Status:   Online
       |   Size:     239713435648 B (239.7 GB)
       |
       +-< Physical Volume D0BA2837-514D-4620-8E1D-26D18137CA94
       |   ----------------------------------------------------
       |   Index:    1
       |   Disk:     disk1s2
       |   Status:   Online
       |   Size:     648374337536 B (648.4 GB)
       |
       +-> Logical Volume Family 736A8900-FE9C-4342-A932-EDC35444774C
           Encryption Status:       Unlocked
           Encryption Type:         None
           Conversion Status:       NoConversion
           Conversion Direction:    -none-
           Has Encrypted Extents:   No
           Fully Secure:            No
           Passphrase Required:     No
           |
           +-> Logical Volume B4997853-59F8-4480-BB48-3481B2F2A123
               Disk:               disk2
               Status:             Online
               Size (Total):       884000030720 B (884.0 GB)
               Size (Converted):   -none-
               Revertible:         No
               LV Name:            Mayfly
               Volume Name:        Mayfly
               Content Hint:       Apple_HFS
    $  sudo gpt -r -vv show disk1
    Password:
    gpt show: disk1: mediasize=750156374016; sectorsize=512; blocks=1465149168
    gpt show: disk1: Suspicious MBR at sector 0
    gpt show: disk1: Pri GPT at sector 1
    gpt show: disk1: Sec GPT at sector 1465149167
          start        size  index  contents
              0           1         MBR
              1           1         Pri GPT header
              2          32         Pri GPT table
             34           6        
             40      409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
         409640  1266356128      2  GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
    1266765768     1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
    1268035304         280        
    1268035584   197111808      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
    1465147392        1743        
    1465149135          32         Sec GPT table
    1465149167           1         Sec GPT header
    $ sudo fdisk /dev/disk1
    Disk: /dev/disk1     geometry: 91201/255/63 [1465149168 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE    0   0   2 - 1023 254  63 [         1 - 1268035583]     *2: 07 1023 254  63 - 1023 254  63 [1268035584 -  197111808] HPFS/QNX/AUX
    3: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    4: 00    0   0   0 -    0   0   0 [         0 -          0] unused

    My setup is very similar to your's, Ryan, on a Mac Mini5,2 and the ordering is different and Winclone was not used.
    1. New Mini with internal 500GB with Mountain Lion(ML), put into an external FW enclosure, so the Mini can/could be booted using an external drive for contigency.
    2. Replaced internal stock HDD (500Gb/5400rpm) with SSD/HDD (256Gb SSD/1TB 5400rpm).
    3. Installed W7 x64 on 64GB partition on HDD, which was a single-partition drive to begin with.
    4. The remaining HDD partition and the entire SSD was put into a Fusion drive.
    5. Using Command-R, new ML installed on Fusion HD.
    Here is what I currently have...(Disk0 - SSD, Disk1- 1TB HDD, Disk2 - Fusion, Disk3 - External FW).
    diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *256.1 GB   disk0
       1:                        EFI                         209.7 MB   disk0s1
       2:          Apple_CoreStorage                         255.7 GB   disk0s2
       3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *1.0 TB     disk1
       1:                        EFI                         209.7 MB   disk1s1
       2:          Apple_CoreStorage                         934.5 GB   disk1s2
       3:                 Apple_Boot Boot OS X               650.0 MB   disk1s3
       4:       Microsoft Basic Data BOOTCAMP                64.9 GB    disk1s4
    /dev/disk2
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS Fusion HD              *1.2 TB     disk2
    /dev/disk3
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *500.1 GB   disk3
       1:                        EFI                         209.7 MB   disk3s1
       2:                  Apple_HFS Rescue HD               371.8 GB   disk3s2
       3:                  Apple_HFS Leopard HD              31.9 GB    disk3s3
       4:                  Apple_HFS Snow Leopard HD         31.9 GB    disk3s4
       5:                  Apple_HFS Lion HD                 31.3 GB    disk3s5
       6:                 Apple_Boot Lion Recovery HD        650.0 MB   disk3s6
       7:                  Apple_HFS Mountain Lion HD        31.3 GB    disk3s7
       8:                 Apple_Boot Mountain Lion Recove... 650.0 MB   disk3s8
    diskutil cs list
    CoreStorage logical volume groups (1 found)
    |
    +-- Logical Volume Group A8C00490-0E14-401F-AB69-59F37724E8C4
        =========================================================
        Name:         Fusion
        Size:         1190201270272 B (1.2 TB)
        Free Space:   0 B (0 B)
        |
        +-< Physical Volume 4772013B-5520-4801-9BE5-BCAEF4AEDAB3
        |   ----------------------------------------------------
        |   Index:    0
        |   Disk:     disk0s2
        |   Status:   Online
        |   Size:     255716540416 B (255.7 GB)
        |
        +-< Physical Volume A679A101-3C78-4A59-B5EE-A4339210CFAD
        |   ----------------------------------------------------
        |   Index:    1
        |   Disk:     disk1s2
        |   Status:   Online
        |   Size:     934484729856 B (934.5 GB)
        |
        +-> Logical Volume Family 5EF5C7CA-0B9C-4169-82A1-41C84F206672
            Encryption Status:       Unlocked
            Encryption Type:         None
            Conversion Status:       NoConversion
            Conversion Direction:    -none-
            Has Encrypted Extents:   No
            Fully Secure:            No
            Passphrase Required:     No
            |
            +-> Logical Volume 1512657C-ED13-4B31-82C6-7AECBBCA7F98
                Disk:               disk2
                Status:             Online
                Size (Total):       1185508581376 B (1.2 TB)
                Size (Converted):   -none-
                Revertible:         No
                LV Name:            Fusion HD
                Volume Name:        Fusion HD
                Content Hint:       Apple_HFS
    sudo gpt -r -vv show disk1
    gpt show: disk1: mediasize=1000204886016; sectorsize=512; blocks=1953525168
    gpt show: disk1: Suspicious MBR at sector 0
    gpt show: disk1: Pri GPT at sector 1
    gpt show: disk1: Sec GPT at sector 1953525167
           start        size  index  contents
               0           1         MBR
               1           1         Pri GPT header
               2          32         Pri GPT table
              34           6        
              40      409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
          409640  1825165488      2  GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
      1825575128     1269544      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      1826844672   126679040      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      1953523712        1423        
      1953525135          32         Sec GPT table
      1953525167           1         Sec GPT header

  • Write characters to file gives a file not found error

    It appears that it generates the error at the open file sub vi, but I have no problem with write to spreadsheet file which uses the same sub vi.
    Jim
    LV 2013

    Sorry to answer with some questions..
    Which version of LV are you using?
    Does the file that you attempt to write to, exist? Do you specify a filename in your vi?
    Otherwise,(in LV7) you will be prompted for a file. If it does not exist, the subvi will create it. If it exists, it will ask if you want to overwrite it.
    Experiment with the "Write Character to File" vi by simply connecting a string to it... and run it.
    BTW, your file must be closed when you attempt to write to it, otherwise the error is actually from Windows.
    If you want to append to an existing file (add to it without deleting the original contents), then wire a TRUE to "Append to file". Of course, your file path should be filled in with an appropriate path & filename. In t
    his case, you will not be prompted for a filename. However, you can experiment without providing (wiring) a path & filename, let LV prompt you.
    Try this as a starting point. You should not get an error. If you still do, can you write what the error message is?
    -enjoy-
    JLV

  • File not found error (no error number or file identified)

    Hi,
    I am getting a file not found error when trying to render a project. The message box does not identify which file is not found nor is there an error message number. I by trial and error tracked the file to a video connected to the PAL_Projector Menu. It is the PAL_Projector.m2v file. I reconnected it but it still gives a file not found error on render. Any suggestions and why do we get these ridiculous error messages in this day and age. The message should identify the file and how to fix the problem.
    Regards
    Richard

    gday
    Is the error on the client or server?
    What role in the application does applications-mapping.xml fulfill?
    How are you loading the file in?
    -steve-

  • "Not Found" Error Message Problem

    Hi All!
    I have a really weird issue happening that I have not found a post for in the boards, although there are some similar ones. I have a video project that I had been working on about a month ago and finished except for credits (I had no problems while working on it then). I finally just got the list of names to use for the credits, so I went to open the project to add the credits and I got a "Not Found" and "Out Of Memory" Message. I have 134.6 Gigs open on the Raid I save everything to, so I know I'm not actually out of memory. So I changed the settings to 80% Application and 50% Stills b/c I have around 10 jpegs I was using for titles in it. That seemed to help at least get the sequence opened. I then had media offline messages for those titles, eventhough they are in the browser and defined as online, so I just reconnected each one individually anyway. That helped with that problem. However, I FCP won't render the transitions around the titles. I deleted the transitions and titles and tried to re-render the video clips that were involved in the transitions with the titles. It won't render those. When I try to view the clips in the viewer, I get the "Not Found" message again. I reconnected a couple of the video clips individually, but I still get the message when I try to view them in the Viewer. The clips in the sequence are there and play in the canvas but not in the viewer and I get the "Not Found" message. I have it set to view the image without wireframes, so that's not the problem. The source videos are read as online in the browser and are in the same place as they were when I originally started the project, so that's not the problem. I've tried different variations on the memory usage. I've tried copying and pasting to a new sequence but get the same problem. Does anyone know why all of a sudden I can't view any of my source video and the clips I used in my sequence in the viewer and why it would give me the "Not Found" error message?
    Some Specs that might be helpful:
    FCP HD 4.5
    Dual 2 GHz PowerPC G5
    2.5 Gigs DDR SDRAM
    Raid 1 with 134.6 Gigs Available Space
    SD NTSC DV Footage - MPG files I transfered originally from the client's portable hard drive
    A Few JPGs of Photoshop Titles
    I'm sorry this is insanely long, but I wanted to provide as much detail as I could.
    Emily

    They were originally on a PC. That quite possibly could be it.
    I just checked all the titles again and they are all RGB.
    Our Raid ocassionally has problems, so I'm thinking it might have something to do with that.
    I'm going to try on Monday to just re-import the videos I need into the project and see how that goes. If anyone has any suggestions, I'll take a look on Monday and see what happens.
    I was just hoping that someone might have had this problem and knew what to do.
    Thanks for your help!

  • "User cannot be found '' error after migration of site from sp2010 to sp2013

    Hi,
    There is a Blogs site, which has been migrated from Sp2010 to Sp2013, and gives ''User cannot be found'' error above the top ribbon:
    Microsoft.SharePoint.SPException: User cannot be found
    Please advise
    sk.Rakhishma

    This is common when a user has left a company and is still listed as an owner of the document.  When the document is moved to the new environment, it has no record of the old user.
    Did you migrate using a migration tool or database attach?  Migration tools usually have an option to handle orphaned users allowing you to map them back to the system account.
    Corey Roth - SharePoint Server MVP blog:
    www.dotnetmafia.com twitter: @coreyroth |
    SP2 Apps

  • Operation not found error while calling AM methods from managed bean

    Hi,
    operation not found error while calling AM methods from managed bean.
    written a method with two parameters in AM.
    exposed the method in AM client interface
    in the page bindings added the method in method action ..left empty in the value fields of the parameters.
    calling the method from managed bean like below
    String userNameVal = (String)userName.getValue();
    String passwordVal = (String)password.getValue();
    OperationBinding operationBinding =
    ADFUtils.findOperation("verifyLogin");
    operationBinding.getParamsMap().put("userName",userNameVal);
    operationBinding.getParamsMap().put("password",passwordVal);
    operationBinding.execute();
    i am getting operation verifyLogin not found error.Please suggest me something to do.
    Thanks
    Satya

    Hi vlsn,
    Can you try with the below code
    // in your backing bean
    OperationBinding operation = bindings.getOperationBinding("verifyLogin");
    //Put your both parameters here
    operation.getParamsMap().put("parameter_name1", parameterValue1);
    operation.getParamsMap().put("parameter_name2", parameterValue2);
    operation.execute();
    if (operation.getResult() != null) {
    Boolean result = (Boolean) operation.getResult();
    and share the result.
    regards,
    Rajan

  • "The attempted operation failed. An object could not be found" error when double clicking on an ics file

    Operation System: Windows 8 Pro
    System Type: 64-bit Operating System
    Office: MS Office Professional Plus 2013
    I am getting "The attempted operation failed. An object could not be found" error when I double click on an .ics file to an appointment to my calender. My outlook.com account's data file is set as default and this error only occurs if
    that is the default data file. I thought that maybe my profile is corrupted. So, I opened up a new profile with the below steps and only add my outlook.com account there:
    1-) Open up the Control Panel and go to Mail section
    2-) Click "Show Profiles"
    3-) Click "Add" and give a name to your profile.
    4-) Configure your outlook.com account (with Auto Account setup, not manual steps)
    5-) Finally, set that profile to be used always.
    Then, I opened up the Outlook 2013 and clicked on the .ics file to add that appointment but got the same error.
    Is this a known issue or specific to me?
    Thanks!

    yes, I have the same problem.
    The workaround of saving the ICS file and then importing it into the current calendar
    works, 
    but the ICS calendar
     displays in other section, NOT in the section of my old events.
    why  ??

  • Web Service Proxy error: "No operation found using soap keys"

    I'm trying to use the new tools, and having a little trouble. Not many results when searching for this error message.
    I have developed and deployed a new Java web service proxy using the outside-in approach according to the [help docs|http://help.sap.com/saphelp_nwpi71/helpdata/EN/46/7f2fef88190ad3e10000000a11466f/frameset.htm] (PI 7.1 SP07, NWDS 7.1 CE SP09 PAT0000). Started with a Service interface in ESR, then generated a java bean skeleton into a new EJB project in NWDS, then wrote business logic and deployed.
    When I test the web service (with 3 different SOAP test clients) I get the same error, below:
         <faultstring>com.sap.engine.services.webservices.espbase.server.additions.exceptions.ProcessException:
    No operation found using soap keys [], [spmat_jdbc_receiver_proxy]. InterfaceMapping Object class:
    com.sap.engine.services.webservices.espbase.mappings.InterfaceMapping mappings: {BindingQName=
    {urn:nexeninc:pi:ll:spmat:100}SI_I_Sync_SPMAT_JDBC_Receiver_ProxyBinding, BindingType=Soap, PortTypeQName=
    {urn:nexeninc:pi:ll:spmat:100}SI_I_Sync_SPMAT_JDBC_Receiver_Proxy, JAXWSInterface=true, InterfaceMappingID=-
    27e4d529:127632b5c52:-7ebb}.</faultstring>
    My service endpoint interface looks like this (unimportant lines removed):
    package nexeninc.pi.ll.spmat._100;
    @javax.jws.WebService(name = "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy", targetNamespace = "urn:nexeninc:pi:ll:spmat:100")
    @javax.jws.soap.SOAPBinding(parameterStyle = javax.jws.soap.SOAPBinding.ParameterStyle.BARE, style = javax.jws.soap.SOAPBinding.Style.DOCUMENT, use = javax.jws.soap.SOAPBinding.Use.LITERAL)
    public interface SIISyncSPMATJDBCReceiverProxy {
      @javax.jws.WebMethod(operationName = "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy", action = "http://sap.com/xi/WebService/soap1.1")
      @javax.jws.WebResult(name = "spmat_jdbc_receiver_proxy_response", targetNamespace = "", partName = "spmat_jdbc_receiver_proxy_response")
      public generated.SpmatJdbcReceiverProxyResponse siISyncSPMATJDBCReceiverProxy(@javax.jws.WebParam(name = "spmat_jdbc_receiver_proxy", targetNamespace = "", partName = "spmat_jdbc_receiver_proxy") generated.SpmatJdbcReceiverProxy spmat_jdbc_receiver_proxy);

    (continued from above post)
    And my implementation bean looks like this (unimportant lines removed):
    package nexeninc.pi.ll.spmat._100;
    @SessionHandlingDT(enableSession = false)
    @AuthenticationDT(authenticationLevel = AuthenticationEnumsAuthenticationLevel.BASIC)
    @TransportGuaranteeDT(level = TransportGuaranteeEnumsLevel.NONE)
    @WebService(serviceName = "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy_Service", portName
    = "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy_Port", endpointInterface
    = "nexeninc.pi.ll.spmat._100.SIISyncSPMATJDBCReceiverProxy", targetNamespace = "urn:nexeninc:pi:ll:spmat:100", wsdlLocation
    = "META-
    INF/wsdl/nexeninc/pi/ll/spmat/_100/SI_I_Sync_SPMAT_JDBC_Receiver_Proxy/SI_I_Sync_SPMAT_JDBC_Receiver_Proxy.wsdl")
    @Stateless
    public class SIISyncSPMATJDBCReceiverProxyImplBean {
         @RelMessagingNW05DTOperation(enableWSRM = false)
         public generated.SpmatJdbcReceiverProxyResponse siISyncSPMATJDBCReceiverProxy(
                   generated.SpmatJdbcReceiverProxy spmat_jdbc_receiver_proxy) {
              System.out.println("Starting siISyncSPMATJDBCReceiverProxy.");
    When we first created the new endpoint in NWA, we tried asigning a new name for both "Service Endpoint Name" and "In New Service", and we received this error.
    We then deleted the endpoint and created another new one, setting "Service Endpoint Name" to match the portName in the implementation bean: "SI_I_Sync_SPMAT_JDBC_Receiver_Proxy_Port", but that didn't work either. The only option we enabled in the endpoint was HTTP authentication: User ID/Password.
    My ejb-j2ee-engine.xml and application-j2ee-engine.xml are both empty (but they exist).
    I am new to EJBs and JAX-WS so hopefully it's something simple. All help appreciated!
    Apologies for the long (and wide) post.
    - Rob

  • I am transfering my stuff from my lap top to my desk top (both Mac). I cannot get my CS4 to open. It gives me a 150:30 error, licencing thing. I have no idea what to do and after hours of searching none of what I found helps. I don't know anything about t

    Sorry didn't know that the first step was just supposed to be "subject".
    So here it is again.
    "I am transfering my stuff from my lap top to my desk top (both Mac). I cannot get my CS4 to open. It gives me a 150:30 error, licencing thing. I have no idea what to do and after hours of searching none of what I found helps. I don't know anything about this stuff so please don't answer with "maybe this willl work, or maybe that."  I need a real answer please and I cannot find a way to actually contact Adobe. I also don't have a disk drive on this Mac. Thanks"
    Also please feel free to e-mail the answer because I hate looking for these answers online. It takes me forever to find this section. Not that I have even even gotten a real answer.
    [email protected]

    Hi Sonia,
    While transferring Adobe from laptop to PC the licensing files got corrupt and the right way to use Adobe Applications is to install first as transferring from a different machine can give you problems.
    You can try steps from this article if that helps otherwise you have to reinstall and manually delete some files , everything is mentioned.
    http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
    You can download CS4 from here:
    Download CS4 products

  • TS5376 HI, I installed Itunes on my computer. When i wanted to open the application, it gives error "Apple Application Support not found" "Error 2 (Windows error 2)"

    HI, I installed Itunes on my computer. When i wanted to open the application, it gives error "Apple Application Support not found" "Error 2 (Windows error 2)"

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if a component such as Apple Application Support won't install normally.
    tt2

  • Muse gives "unexpected error I-200" message

    Muse gives "unexpected error I-200" message. I had downloaded Muse Beta 7 but it wouldn't accept any of my passwords. I uninstalled Muse CC and tried the beta but still got the I-200 error. I got the same message after I tried to reinstall Muse CC.
    Is there ay problem with running the beta and CC version on the same system? They had worked before.

    Hi David Healy,
    if a customer has a valid subscription, and still gets this error, the issue gets resolved by three simple steps:
    1. Close Muse application.
    2. Delete the OOBE folder as explained in the step 1 of this article: http://helpx.adobe.com/muse/kb/unexpected-error-occurred-i-200.html
    3. Restart Muse and select the "Sign in to Existing Subscription" option and login with your Adobe ID (that was used to subscribe to Muse).
    This would fix the issue.
    Also, to avoid wait times and transfers, I'd advise you come to the Muse chat queue directly by going to this page and selecting "Adobe Muse" from the dropdown (If you select any other product other than Muse, you'll land up in another chat queue and will have to be transferred to the Muse queue - so it's advisable you select the product that you wish to chat about from the dropdown): http://helpx.adobe.com/contact.html
    Hope this helps.
    Regards,
    Rajshree

  • Radio Button Selection gives "The page cannot be found" Error

    I have a Radio Button that has 4 chooses, one of the choices has Javascript to ask a Prompt and uncheck it depending on the user response.
    When I select the one that has the prompt, it works as expected with the question, however when I click the Submit button on the page to fire my database trigger it fails with "The page cannot be found".
    All the other choices, once picked update the datasbase ok.
    Any idea's from anyone why I'm getting this error?
    script type="text/javascript">
    function yesno(msg,item)
    if ($x(item).name = 'PF' && $x(item).checked)
    confDel= confirm(msg);
    if (confDel != true)
    {$x(item).checked = false;}
    </script>

    Preethi,
    When I click on submit button ,iam getting " The page cannot be found" error.
    When you run the page and click on its submit button, you get the error. Being careful to distinguish problems you get at design time vs. those you get at runtime is extremely important when you ask others for help here.
    I looked at the application. In your problem description, you gave absolutely no information that explains what you are doing on this page. Whatever it is, the problem is that you are creating HTML items on the page with names like
    name="f60"
    Then when you POST the page, you get an error. That's because those "fxx" items are limited to the range "f01" .. "f50".
    Scott

  • Found Fix for "unexpected-end-of-file" error for Photoshop

    NOTE:
    You will lose all layers (this process flattens the image, but it's better than nothing).
    You need to have Adobe Illustrator installed (you could get a trial version or something if you don't have it).
    I was using Windows 7 when I did this, so it may not work in OSX (Apple) or Windows 8.
             1. Right click on the corrupt document and open it in Illustrator. (Mine took a while so you may have to wait)
             2. Save the file as a .pdf
             3. Right click on the .pdf and open it in Photoshop.
    Sorry, I know i started a discussion but I can't figure out how to answer a post.

    Hi Oliverchuckle
    I tried this on my first encounter of the error and it works pretty good for simple PSD files but not on complex ones containing vector masks etc. And it will not work on larger PSD files that are more damaged and "unreadable".
    There are many things that can cause this - all related primarily to the state of the network or hard drive the file is being saved to.
    To avoid:
    work off your local machine hard drive (not a network drive)
    ensure that you have ample (scratch) disk space (at least 20% free)
    create multiple versions of your files with save as. You can always trash the ones you don't want when you're done.
    Recovery depends on how far the save function got before photoshop (or your computer) crashed. In many cases only the file header information is damaged. For larger files the damage can be more extensive.
    In all cases, the best recovery method is to open the file with Adobe Image Ready and save as. It may give a "file is unreadable" error while opening but usually manages to still open the file. In my testing, the results are 100% accurate (to whatever state the file existed in). In most cases the file was 100% recovered, including complex files containing vector and layer masks, clippings and groups. I cannot say this is the case for any of the paid for "repair PSD" utilities which extract a raster only version of each layer and then re-build the layers into a new psd file. This results in a limited, "destructive" or rasterized layered file.
    Unfortunately, Adobe Image Ready is hard to find. The last version I believe was V9 (“CS2″), May 2005.
    Adobe is offering a legacy download here:
    https://helpx.adobe.com/creative-suite/kb/cs2-product-downloads.html#
    for users who previously purchased it (and need to re-install it). I didn't try this as I still have CS2 already installed on an older machine. Note, you will need MacOS 10.6.8 running rosetta or older to instal on a Mac.
    Hope this helps!

Maybe you are looking for