Electrodes used in ECG simulation toolbox in NI Multisim

I've designed an ECG extraction circuit and simulated it in NI Multisim. I used the ECG Simulation toolbox to give raw electrode inputs to my circuit. I also got a very good ECG as output. Now, I need to do the same in hardware for which I'll have to buy  ECG electrodes. I felt that the ECG simulation toolbox would've been modelled based on a real ECG electrode. If so, can anyone tell me the specifications of that electrode so that I can buy a similar one and be rest assured that the same circuit will work in hardware too? Please reply as soon as possible since I have to order and buy electrodes and components.

You've posted to the TestStand board. Click on options and request the moderator to move this thread.

Similar Messages

  • I have installed Flash player in Firefox, now how do I use it. Need to use for a simulation class assignment. Thank you

    How to use in Firefox, install is ok.

    Hi,
    Adobe Flash Player is a plugin that allows browsers such as Firefox to display Flash media on web pages.
    Open your simulation in web browser, if there is any flash content , it will display in that.
    I hope, I was able to answer your question if not then please provide some more information on this.
    Regards,
    Devendra

  • When using the LabVIEW Simulation Module, how can I start a frequency sweep with the Simulation Chirp signal generation VI at an arbitrary time after the simulation initial time?

    I'm using the Simulation Loop on LV RT when interacting with some hardware (i.e. all I/O is happening in the Sim loop). I'm going to conduct a frequency sweep test on the hardware and want to use the Simulation Chirp function. However, there is no way (that I can see) to trigger the Chirp to start at some event (i.e. I click a boolean on the front panel and enter a case statement). The Chirp is tied to the global time of the Simulation loop and so are it's input parameters. Is there a way to make it relative to some time at which an event happens?

    Craig,
    Your solution will 'cut' the beginning of the signal and only show the signal afterwards.
    To control when the chirp should start, the best option is to use the Chirp Pattern.vi ( in the Signal Generation palette) and use a Lookup table to control when to feed the time. The shipping example (in LabVIEW 2013) shows how to code using a lookup table.
    C:\Program Files (x86)\National Instruments\LabVIEW 2013\examples\Control and Simulation\Simulation\Signal Generation\SimEx Chirp.vi
    Then, to start from a toggled boolean, look at the example:
    C:\Program Files (x86)\National Instruments\LabVIEW 2013\examples\Control and Simulation\Simulation\Signal Generation\SimEx Step.vi
    and Here is the example in 2013 (in attachment):
    Barp - Control and Simulation Group - LabVIEW R&D - National Instruments
    Attachments:
    SimEx Chirp with Delay.vi ‏241 KB

  • Cannot connect to database using the Upgrade Simulation Tool

    I have installed the Upgrade Simulation Tool on my system and when I try to run the tool my system works in the for awhile in the background and creates the _Simulation mdf and ldf files and a .bck file.  After 3 or 4 minutes it gives me an error "Cannot connect to the database".  
    It looks to me like it is connecting to the database because it is creating the files in the SQL Data folder.  I have tried to run it on several databases and get the same results.
    Thank you, Jeff

    Hi,
    You may not have the ability to upgrade it directly.
    He does have the ability.
    When downloading Pl 42, it is cleary marked as "Upgrader", which means it can be used for upgrade (in this case simulation) from a lower version than 2007A
    Patchlevel which are marked as "patch" are suitable only for updating the PL within the very same version of SAP Business One.
    This tool should run under 2007 system I believe.
    The Upgrade Simulation tool was designed in orderto test an upgrade, therefore it can run at a machine where 2005 version is installed. Technically speaking it creates a second SBO-common, which can be used only with the special designed (read only) client of the tool.
    Jeff, you should check access rights of your SQL Data folder.Maybe grant user "Everyone" modifying rights to that folder. In addition you could try to detach a DB and move the related *.mdf and *.ldf to another folder where no access denied rights were applied.
    If using MSSQL 2005 create via ODBC a Native Client connection to the Server, although you might just working locally only.
    Regards
    Mario

  • Mimo simulation in Control Design & simulation toolbox

    Hi,
    I am running is simulation with MIMO system represented as state space in control design and simulation toolkit. I see that I am not able to give vector with 2 inputs to the MIMO model. By default state space is represented by a SISO model. Can anybody guide how can one give two inputs to the state space model and run it as a MIMO system.
    Thanks and best regards,
    Amit Kalyani 

    You should be able to double click on the State-Space VI which will bring up State-Space Configuration Dialog Window. You will be able to use the drop down Polymorphic instance to selec a MIMO system. Or another way of doing this is to change the parameter source to Terminal, then wire in your MIMO model directly.
    Andy Chang
    National Instruments
    LabVIEW Control Design and Simulation

  • Want to set the 16 DIP switches to use the Instrument simulator in RS232

    Can't find the meaning of the 16 DIP switches in the NI Instrument Simulator documentation for use in RS232.

    The switch settings are in the latest version of the manual. You can download it from here.

  • CRio and SCAN Engine using the Engine Simulation Toolkit for VERISTAND 2014

    I am making some adjustments to the IO I use in my system, and am realizing I will be reading PWM not generating PWM, so I will do that with the 9401.   I have the option to set it up as Input or counter.    If it's count, I won;t have any outputs available because it turns all the pins into inputs that read counts.  
    Also, what is the best way to tie my cRIO9013/9113 to the example.   Anything special for my FPGA?   I am not sure how to modify it for my needs ( i don;t have all of the engine specific IO or need...I plan to do some other type interfaces....) 
    Thoughts?

    Hi there!
    Unfortunately I am not personally familiar with this toolkit, but have you tried posting your question to the toolkit's discussion thread here? It looks like a developer checks this location pretty frequently!
    https://decibel.ni.com/content/thread/23395?start=75&tstart=0
    I hope this helps!
    Good luck,
    Andy C

  • I have Adobe Presenter 9  Why cant I use the Application Simulation in the Ribbon?

    Any Help ?
    Its Grayed out, whats the point of it being there if it doesnt work?

    Hello,
    You need to have Adobe Captivate installed on your machine for this feature to work.
    If Presenter does not find Captivate, this feature will be grayed out.
    regards,
    mukul

  • How Do I Get the Use the New Schematic Capture in NI Multisim 11.0?

    Hello Multisim Users! 
    If you have begun the transition to NI Multisim 11.0, I wanted to provide you with some resources that will definitely help in understanding the benefits of these new features, as well as how (and when) to use them.
    The new schematic capture net system in NI Multisim provides a number of benefits to the user. Most notably engineers, can now take advantage of an up-to-date and intuitive circuit design environment. As a part of the complete re-architecture to our schematic capture environment in Multisim 11, users can now place a host of different connectors to symbolize the virtual connections in their designs. 
    Check out to use these new connectors with this brand new DevZone article (with embedded video): http://zone.ni.com/devzone/cda/tut/p/id/11219
    Also available for those transitioning to NI Multisim 11.0, we have created a special FAQ (or KnowledgeBase article) which will demonstrate exactly what to expect from this experience:  http://digital.ni.com/public.nsf/allkb/AD965CF4EA0F0FD2862576F5006BCB60
    Thanks Greatly! We look forward to hearing your feedback on these new tools.
    Best Regards,
    Bhavesh Mistry
    Product Manager
    National Instruments 

    Hi everyone,
    Fernando (aka Fernando_D) fixed this yesterday. Thank you for bringing this into our attention. I hope this works for everyone now!
    Have a great weekend!
    Yi
    Software Developer
    National Instruments - Electronics Workbench Group

  • Oracle BPM Suite 11gR1 simulation using real data?

    Does anybody know if it is possible to "record" usage of a real business process model and use it as simulation data?
    Thanks for your time!

    I have exactly the same question from a prospect: They love the simulation feature in BPM 11g, and they are bought into the continuous improvement aspect of BPM. Now they want to understand how to put the two together and their question is whether and how is it possible to take actual process metrics and use those in a simulation. Is this possible? Thanks.

  • Dreamweaver Developer Toolbox :: Anyone Using This?

    Is anyone using the Dreamweaver Developer Toolbox? If you could share your experience with it, I'm considering the extra purchase.
    Linda

    Adobe® Dreamweaver® Developer Toolbox is a set of Dreamweaver server behaviors and commands for creating dynamic web applications using PHP, Adobe ColdFusion®, and ASP VBScript server scripting technologies. This Dreamweaver extension helps web developers create membership-based websites, as well as content management systems, CRM back-ends, and other web-based solutions without requiring advanced programming knowledge.
    If you are an advance developer than go a head this tool will really help you in all your projects.
    It has too many features which you can take advantage of. Such as : -
    - Rapid application development
    - Wizard-like interfaces
    - User interface persistence
    - Database management
    - Dynamic lists and forms for website administration
    - Upload files and images
    On Web Hosting
    - Manage database information in your browser
    - Rich Internet applications
    - Client-side form validation
    - HTML form widgets
    - Dynamic Spry datasets
    - CSS skins for a custom look
    - Fresh interfaces and CSS customizable skins
    - Multi-browser compatibility
    Reason to buy: -
    1. Increase productivity
    2. Implement client changes in minutes
    3. Visual SQL query generation
    4. Create web interfaces for database administration
    5. E-mail information you need on form submit
    6. Create file upload forms on the fly
    7. Implement solid user registration systems
    What else you want. I hope this help...

  • Can't use http in ios 8 simulator

    I have installed xcode 6, on a mac book pro (Maverick 10.9.5) When I try to use the ios simulator running ios 8 on virtual iPhone 5s, and try to connect to any site that is not using https, I get a blank page stating that "Safari cannot open the page because the network connection was lost" in the simulator. Any page that uses https works fine.
    Any clue ?

    I have Xcode 6.1.1 and I'm still having problems.  http and https both.  It's not just safari either.  Other applications can't access the network either.
    Could these errors give any additional information?
    Dec 11 16:32:49 **** lsuseractivityd[45897]: [SFActivityAdvertiser] ERROR: no XPC proxy, queuing advertisement <49a6aaa1 dc34cf01 72>
    Dec 11 16:32:56 **** SpringBoard[45804]: Could not determine current country code: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x7d0e9680 {NSErrorFailingURLStringKey=http://gsp1.apple.com/pep/gcc, NSErrorFailingURLKey=http://gsp1.apple.com/pep/gcc, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x7d01aff0 "The request timed out."}
    Sometimes I can get it to work and sometimes I can't.  I am getting very frustrated with the instability of the network connection on iOS 8 simulator.

  • How do I simulate thermocouple in closed loop PID using plant simulator?

    Hi all
    am creating a PID application to control temperature which is measured by a thermocouple. how do i simulate the thermocouple in closed loop by changing the plant process parameters, the temperature is controlled by a infra red lamp.
    Regards
    Arun

    Hello Arun,
    Please refer to the second order system that I have attached. This VI uses the plant simulator to simulate a thermocuple in a temperature chamber.
    Regards,
    Arun V
    National InstrumentsMessage Edited by sunrays on 06-27-2005 06:21 PM
    Message Edited by sunrays on 06-27-2005 06:22 PM
    Attachments:
    Angelantoni.zip ‏31 KB

  • Multisim 11 only uses one CPU core during simulation

    Hi,
    Just recently I've been using MultiSim again, v11 if that matters, and simulating goes slow, to my opinion that is.
    Now there are two things that I've noticed:
    - Multisim only uses one of two CPU cores during simulation, not both;
    - I've enabled CPU throttle (AMD's Cool'n'Quiet) but corespeed remains very low even though Multisim needs CPU power while simulating.
    The simulating of a NE555-based LED-flash circuit requires about 28 seconds to get to 100ms in the simulation. Now if I can get the CPU to throttle up, by for example having Prime95 stress one of the two cores, then the simulation only requires 12 seconds to get to 100ms.
    So here are my two questions:
    1. Is Multisim 11 capable of using more than one CPU core while simulating? If yes, how can I get it to use more than one?
    2. Probably not the right forum to ask, but is there a way to force Windows 7 Ultimate x64 to throttle up the CPU when Multisim starts simulating? Since Multisim does not seem to stress the only core it uses enough to throttle it up. Using Prime95 on one core does trigger a throttle up.
    With regards,
    Bart Grefte
    Relevant specs:
    Windows 7 Ultimate x64
    Multisim v11
    AMD A4-3400
    16GB RAM

    Completely forgot this topic....
    Is there a good reason why there is no multicore support? Multisim can certainly use it for simulating.
    As for the CPU throttling, I found a batch that can increase/decrease the "minimum processor state"-setting and it works immediately, no reboot required.
    @echo off
    powercfg.exe -getactivescheme > "%userprofile%\appdata\~apo.tmp"
    set /p v_currentscheme= <"%userprofile%\appdata\~apo.tmp"
    set v_currentscheme=%v_currentscheme:~24,36%
    del "%userprofile%\appdata\~apo.tmp"
    powercfg -setacvalueindex %v_currentscheme% 54533251-82be-4824-96c1-47b60b740d00 893dee8e-2bef-41e0-89c6-b55d0929964c %1
    powercfg -setdcvalueindex %v_currentscheme% 54533251-82be-4824-96c1-47b60b740d00 893dee8e-2bef-41e0-89c6-b55d0929964c %1
    powercfg -s %v_currentscheme%
    exit
    Usage is simple:
    Start -> run -> c:\pathtobatch.bat 100
    for "minimum processor state"-setting at 100%
    Start -> run -> c:\pathtobatch.bat 5
    for "minimum processor state"-setting at 5%
    Please note that "set v_currentscheme=%v_currentscheme:~24,36%" is not the same for every language. The original batch had "set v_currentscheme=%v_currentscheme:~19,36%" (most likely for the English version of Windows 7), but since my Windows install is in Dutch, I had to change it in order for it to work.
    Running the batch with @echo off removed will show why.

  • Converting Dynamic ECG to Arrays

    Hi, im new to this forum and LABView program.
    I am doing an HRV analysis using LABView for a project in school, with the help of the NI developer's Zone HRV guide.
    All are good while using a static .txt array for the input, but now i need to get a dynamic signal using a DAQ and an ECG simulator, and i am unable to write the DDT to arrays.
    I have search the site for other people's query on this matter, but none of the method work on my program.
    Anyone with around care for a help? I have i picture of my program uploaded:

    The first thing to do is put your data acquisition and this code inside a while loop so that it run more than once. Then you can place a shift register on the while loop. Right click on the edge of the while loop and select Add Shift Register. Shown below is the basics.
    Attachments:
    Basic Shift Register.PNG ‏5 KB

Maybe you are looking for

  • Using ABAP routines for data selection

    Hello, I want to use ABAP routine to determine value range of data selection in Data Package but when I use routine for one field, selection criterias for other fields are ignored, e.g.: in Data Package I have two selection fields: CPUDT     Accounti

  • Scheduling type Backwards vs Backwards in time in OPU3

    Hello All, I have a question regarding the Scheduling type in OPU3. What is the difference between Backwards and Backwards in time? Thanks in advance George

  • Azure Service Bus client: Best way to wait for server response?

    Hi, I have a web service that needs to send a request on Azure Service Bus and wait for the response. The web service must operate synchronous as seen from the web service client, that is: public Response WebServiceMethod(Request) senderQueueClient.S

  • A database that contains data required for this form to function correctly cannot be found?

    Hi, In my scenario, i m trying to pull out data from sql server using windows authentication and display in infopath form. I set some rules in textbox control change that retrieve data from sql database. and I have enabled cross domain data access fo

  • Port not enough?

    Is the port on my macbook not enough to run a portable external drive? it came with a power supply, but says it is not needed. Should I use it?