Element Entry Screen does not show value

I have created an element xxtest123, created a fast formula, and the formula result contain the direct result to this element.
But before creating fast formula I did following steps.
Created Input Values
The input values this element has are
Pay Value, Hire Date and Date Of Birth all are non enterable by user, and Database Items boxes corresponding to these values are checked.
Created Element Link
I, later linked it to a payroll and checked box Standard on the element link screen.
Now issue is after running Payroll I can see the SOE report and Run Result Screen shows the expected result
But the element entry screen does not show the values. Rather the fields are simply blank.
Can anyone please help me why it is behaving such a way?

Thanx Sharath for your quick response.
But I have run QuickPay for that employee.
After running QuickPay the input values names are coming into element entry value screen.
But it is not showing the value corresponding to the element input value names.
Thanks,
Pankaj Kedia

Similar Messages

IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black

IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!

It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes

TS3276 the images (attachments) are automatically resized (smaller) when I send them to a customer. My email screen does not show a drop down menu box where you can leave as actual size. Is there a setting elsewhere that can be set.

Any suggestions on problem I have. I receive images, say a file that is 3 mgs through email on Safari mail and when I try to resend it or forward it or any other larger file, when it sends the file is reduced by about 1/3. My screen does not show and drop down menu with a feature to keep actual size or reduce that is suggested when I looked up solutions to the problem. I can't find a setting anywhere in mail that I can change to make sure my files are kept at actual size. I figure a setting got changed -don't know how - but it happened about a month ago. Caused problems as I work in graphics can't send files to clients as they come out too small. Any suggestions on how to fix.
Thanks

What email program are you using? And what do you mean by "Safari mail"?

When printing an AutoCAD-exported PDF file, the paper version has lines that screen does not show

Hello,
We were contacted by our customer, a landscape architectural company that uses our product, M-Color, (http://m-color.com) to plot AutoCAD drawings with required preferences and effects.
However, they provided us with a sample PDF files, that contain examples of scanned drawings, that have some "ghost lines" at the drawings that the screen does not show.
We tracked the issue and it appears to be an issue with Adobe Reader pringing. We tried many versions from 8.0 version onwards to the latest versions available in public, all represent the same issue.
This may be an issue of the original drawing having some line that was not marked ending at some point.
The zip file within the link below has three PDF files, two from the company that brought this issue to our awareness and the one with name "scanstation" is printed by me, and then scanned with markings to explain the issue.
Any ideas what would be the best solution to solve this issue?
https://skydrive.live.com/redir?resid=FF1904428CF64324!1445&authkey=!AMwkjv9QMg-Gawg

Edit>Preferences>Accessibility... Replace Document Colors (use custom colors - black on white)
That usually fixes ghosting...

Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black, when I try to synchronise my ipod to my library it comes up with a message saying "iTunes could not back up the ipod because a session could not be

Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black constantly. When I try to synchronise my ipod with my iTunes library it comes up with a message saying " iTunes could not back up the ipod because a session could not be started with the ipod. Please help and reply if you know an answer!!!

Try this previous discusssion:
https://discussions.apple.com/message/12518406#12518406

Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black but my ipod synchronises to my iTunes library. Please help!

Does anybody know why my ipod touch 3rd generations screen does not work show anything? The screen is all black like it is switched off, but my ipod synchronises to my iTunes library. It is fully charged. Please Help!!!

Try here:
iPod touch: Hardware troubleshooting

Plz. help,table does not show value for one field

hi all,
i have a really strange problem , i have a string field in access database that contains the date and time value,this field for some strange reason does not show in my table created through html,
i tried all combination(arranging the fields) ,renaming it w/o help, it shows the value using out.println(but then why is it not showing me in the table???)
plz. help ASAP.
the code is as under
<HTML>
<HEAD><TITLE> LOGGED IN ok</TITLE> </HEAD>
<BODY bgcolor = "yellow">
<%@ page import = "java.sql.*" %>
     <%! // declaring variables
String s = "";
java.sql.ResultSet rs=null,rs1=null,rs2=null;
java.sql.Connection con;
java.sql.Statement stmt,stmt1;
String empId = "",compid ="",calltype ="",probheader="",probdescription ="",probcomment ="",priority ="",a="";
%>
Following are the pending complaints ..
     <TABLE BORDER=1 CELLSPACING=0 CELLPADDING=0 width="100%">
     <TR>
     <TD> ComplainD </TD>
<TD> ComplainId </TD>
<TD> ProbHeader </TD>

</TR>
     <%
     try
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};" +"DBQ=c:/vishal/HelpDesk.mdb;DriverID=22;READONLY=false","","");
     //java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Portal");
          java.sql.Statement stmt = con.createStatement(java.sql.ResultSet.TYPE_SCROLL_INSENSITIVE,java.sql.ResultSet.CONCUR_READ_ONLY);
          s = "select * from Complains";
     java.sql.ResultSet rs = stmt.executeQuery(s);
                    while(rs.next())
                    //getting data from database
                                                       empId = rs.getString("EmpId");                    // out.print(" " + empId);
          compid = rs.getString("ComplainId");
          // out.print(" " + compid);
          calltype = rs.getString("CallType");
          // out.print(" " + calltype);
                    a = rs.getString("Complaindate"); //problem with this field
out.print(a); // prints value
          %>
                    <TR>
                    <TD> <%=compid %> </TD>
                    <TD> <%=calltype %> </TD>
                    <TD <%=a %> </TD>
                                   </TR>
<%
                    }//while loop
     %>
     </TABLE>
     <%
     }//try
          catch(Exception ep)
          out.println(ep);
          System.exit(1);
%>
</BODY>
</HTML>
value in database is as follows :-
Complaindate
5/18/2003 1:30:27 PM
5/18/2003 7:32:43 PM
5/18/2003 7:34:02 PM
5/18/2003 7:49:19 PM
5/18/2003 7:50:27 PM
5/18/2003 10:49:42 PM
5/18/2003 10:58:24 PM
thanking u ,plz ask if any further clarifications

Hi
I am seeing nothing wrong with ur code..
what about "view source" result.....plz check with that...
whether u r getting all the trs and tds...
revert back on this Issue..
Mars Amutha

Premiere Elements Disk Menus does not show in replay using Mac Pro OS X 10.9.3

I recently installed Premier Elements 12 on my Mac Pro OS X 10.9.3 (Maverick).
Naturally I want to get the highest possible quality to show off on the TV using a standard DVD player.
Outputting to DVD not using AVCHD retains the menu but not on AVCHD, what am I doing wrong?
The Output Quality using just DVD and not AVCHD is lousy, what have I missed?

SigiPC
Thanks for the reply.
Objective Miscellaneous
Let us start with your objectives. If you are restricted to a DVD disc, then your export choices from Premiere Elements will be
DVD-VIDEO widescreen on DVD disc (720 x 480 stretched to 856 x 480 for display after encoding)
or
AVCHD format on DVD disc (1920 x 1080 16:9)
Disc menus are possible as described for main menu page, scene menu page, main menu markers and scene markers. The players will recognize the stop markers placed in a Premiere Elements burn to DVD-VIDEO on DVD disc, but will not recognize the stop markers in a Premiere Elements burn to AVCHD on DVD disc. There should not be problem with main menu markers or scene markers in either choice.
Also, AVCHD on DVD is not playable in the standard DVD player. You need a Blu-ray player that supports AVCHD on DVD disc. Many do, but some may not. The specifications of the player is your guideline.
For AVCHD on DVD disc, you do not need a Blu-ray DVD burner to burn to AVCHD on DVD disc. That can be done with a DVD burner.
And, under all conditions, a stop marker should never be placed at the end of the last item on the Timeline.
Specific Replies
What disk menu? I am talking about “disk menus” as per page 243 of Premiere Elements Manual.
It was my impression that you said that "Disc Menus Do Not Show...", so I was asking which specific disc menu theme are you using? And, is this "do not show" applicable to all the disc menu themes that you have tried to work with?
I am using a Panasonic Blu-Ray player on the TV.
Are the disc menus of your Premiere Elements DVD-VIDEO or AVCHD on DVD not displaying solely with this Panasonic player? Or, is the same observed with computer playback of the DVD product? If the missing menus in the end product issue that brought you here involves solely the Panasonic player, then I would ask if you have checked the player for any option that would control the display of menus in the playback?
Not sure if I am using “interlaced video” but you would know from my input sources mentioned above.
You wrote "My source media is output from iPhoto and Fotomagico slide shows whose output is MP4 MOV or M4V and if played back in Quicktime are of very acceptable quality (H.264 1920X1080)". That does not tell me if 1080p or 1080i, but I suspect that it is 1080p. The MediaInfo properties readout will give a definite answer.
http://download.cnet.com/MediaInfo/3000-2169_4-10413046.html
Just be careful for unwanted carry alongs with the MediaInfo free program. But iPhoto and Fotomagico should be telling you before export whether you are exporting 1080i or 1080p. My main focus on the Premiere Elements 1080p DSLR aspects related to slideshow is the fact that that Premiere Elements DSLR project presets seem to give consistently a sharper photo image in the end product. So when applicable (photo and video wise) it is the preferred route for me and others.
“Quality area” and space requirements are not of concerns at this stage since present show length is not even 30 minutes – or should I be concerned for some other reason but space?
As routine, the Quality area Space Required and Bitrate should be known, even for your 30 minute Timeline content duration. You should be working with a check mark next to "Fit Content to Available Space" and watching the Bitrate in that area. Anything lower than the maximum 8.00 Mbps indicates that the program is making a fit by lowering the Bitrate. The extent that it does not impacts the quality of the end product. Also, of note, the that Bitrate is a variable one in the end product.
This may or may not affect what you are doing now, but it is important information to include in the discussion "just in case".
Also, related trivia...DVD disc marked 4.7 GB/120 minutes is in reality 4.38 GB; DVD disc marked 8.5 GB/240 minutes is in reality 7.95 GB.
Are we any closer to getting at why your disc menus are disappearing after end product creation in Premiere Elements and at playback with your Panasonic player?
Please review and consider.
Thank you.
ATR

2D stacked column does not show values

Hi Friends,
I am new to Apex. I have a 2D column chart with two columns for every data point. The display value check box is checked and I can see the values on the chart. But now when i to make it a stacked 2 D column, the Show Values checkbox field gets disabled and the values does not appear on the stacked 2D column chart. I tried the same with 3S stacked column chart and even there the show values gets disabled.
Is there any way i can display the values on the chart for a stacked column? I can see the values when i hover on it in case of Stacked column chart but I need to display the values on the chart.
Kindly let me know how i can do this in Apex?

Hi Pradeep,
In earlier releases of Application Express, the supported version of AnyChart Flash charts did not fully support the display of values for Stacked charts. Therefore, the "Show Values" checkbox would be disabled on the Chart Attributes page. Since our 4.0 release, with the integration of AnyChart 5 charts, the option to display values on stacked charts is exposed via the Chart Attributes page. To take advantage of this option, along with many other charting improvements introduced with our 4.0 release, I would recommend that you upgrade to the latest version of Application Express.
Alternatively, you could switch your existing chart to use custom XML, and change the following line of code in the chart XML from:
<names show="no"/> to <names show="yes"/>For further information on customising your chart XML, please refer to the AnyChart 3 documentation: http://3.anychart.com/products/docs/anychart/index.htm.
Regards,
Hilary

"edit" link from report to form does not show values

I created a report and an attached form on two different pages. The report is a query combining two tables with outer joins. When I click on the "edit" button on the report, I get forwarded to the form page.
My problem: When I get forwarded to the forms page, I get an empty form, and not the data from the column as expected. The "edit" button behaves more like the "create" button. Anybody an idea what I could change to be able to edit the column data?
Thank you.

I've met the similar problem with previous releases (1.5.0 and 1.5.1) without any objective reason.
As I suggests, sometimes HTMLDB lost current session state. When this occurs, ALL links from reports to it's forms does not transit primary keys. I've just completed application development and I've met this behaviour every months.
As a workaround I found folowwjing process:
Come into administration tab, selet "Report with option to purge current session state". When I purge current session state and re-login to application, all report-form links will start to work.
I don't know, what is the issue, but I met it so soon on my local HTMLDB environment.

Elements 11 organizer screen does not show tools

How can I get the organizer screen to display the tools on the right and bottom?

Not soo much pictures, only 12.000
I try to select one of the thumbnails with a rightclick to update the thumbnail...nothing happens.
Then i look in the help menu for the system info. Dont find the file Thumbs.
in find another point :
Aktueller Katalog:
Katalogname: Mein Katalog
Speicherort des Katalogs: C:\ProgramData\Adobe\Elements Organizer\Catalogs\Mein Katalog\
Größe des Katalogs: 50,7 MB
Größe des Katalog-Cache: 283,6 MB
Maybe i can delete the katalog there? Im not sure it will help.
Edit: I follow the way on my PC and find the thumb5.cache.
But i also find another "Katalog" called Mein Katalog1". Its an older one. So strange...
Message was edited by: um-photography

Match code in report selection screen does not show any values for 0FISCPER

Hi Experts,
I have problem with selection screen in several reports. When I use match code for fiscal period selection I get only # as a possible value. I have checked the master data they seem to be correct. I work with 7.0 BW system. Can you please give me any hint what I should check?
Thank you,
Michal

Hi,
maybe I ask different way - how do you add characteristic values for a characteristic in the BEx? Is it automated somehow in SAP (e.g. from master data)? For the fiscal period I use custommer exit to fill in the default value, which is the current fiscal period. But this is something different, right?
<removed by moderator>
Michal
Edited by: Arun Varadarajan on Nov 14, 2008 3:55 PM

Elements Organizer 10 does not show new picture miniatures

Hello,
first i say sorry about my terrible english, my homelanguage is german.
I have a problem with the organizer 10. Im using the program for longer times withoiut any problem.
But since nearly a week the new pictures, i import to my PC will not shown as a miniatur in the organizer screen. i only see a sand-glass.
Older pictures are already to see and i can select a single picture to see just this one...it will be shown.
I try to reorganize my Katalog...doesnt change.
Here a desktop screenshot.
Can someone tell me, what i do wrong?
Sorry again about my english..
UM

Not soo much pictures, only 12.000
I try to select one of the thumbnails with a rightclick to update the thumbnail...nothing happens.
Then i look in the help menu for the system info. Dont find the file Thumbs.
in find another point :
Aktueller Katalog:
Katalogname: Mein Katalog
Speicherort des Katalogs: C:\ProgramData\Adobe\Elements Organizer\Catalogs\Mein Katalog\
Größe des Katalogs: 50,7 MB
Größe des Katalog-Cache: 283,6 MB
Maybe i can delete the katalog there? Im not sure it will help.
Edit: I follow the way on my PC and find the thumb5.cache.
But i also find another "Katalog" called Mein Katalog1". Its an older one. So strange...
Message was edited by: um-photography

Actual cost in the workplan task screen (hierarchy) not show value.

Hi all,
Could you advice me about actual cost if I want to show in the workplan task screen (hierarchy).
Thank you.

Well, then just check the master data setting in Query designer--> choose 0Costcenter and check the properties > choose advanced tab> under filter value Selection during Query Execution . check for these options
1.Only Posted Values for Navigation
2.Only values in Infoprovider
3.Values in Master data table
4.Characterstic Relationship.
You need to choose the 3rd opitions as you need to read the master tables for 0costcenter.
Hope it helps,
Cheers,
Balaji

Y-axis Does not show values when exported to excel

Hi,
We are facing trouble while showing Y-axis values when report is exported to excel. On report Y-axis is shown properly however when we export it to excel only 1 value is shown with arrow mark(=>).
If we will right click Y axis, we can see all data exported in "Select Data". If we select Y-axis, and change axis properties to automatic, we can see Y-axis values on excel.
Now, is there any property setting which will show all the data on Y-axis instead of showing up single value with arrow?

Thanks for your reply. I tried it closing all sheets and exporting, however result doesn't change. There is an aggregate table we are querying to which holds almost 20k records. Right now I have observed this with 3 reports. In one of the report I am using Horizontal chart. In that report there is issue with X-axis.
e.g.
Band
1000<= |
             |
             |________________________________
              A                     B                  C                D

Element Entry Screen does not show value

Similar Messages

Maybe you are looking for