Elements 11 Assets to Photoshop CC

Hello All,
Amateur/Hobbyest here and looking for some guidance. I have been using Lightroom 4 Elements 11 for a while and recently upgraded to CC subscription. In order to expedite some of the things that are coming up for me, I would like to use a few of the backgrounds that come with Elements in PS. Is there a way to move the library of backgrounds in Elements to PS? Just to be clear, by "backgrounds that come with Elements" I mean the selections of backgrounds that I see on the right panel when I am in "Expert" mode and have the "Graphics" button selected at the bottom right of the screen.
Thanks, in advance, for your help
Marc

Hi mhosborn,
It's always recommended to uninstall the older version of the software before installing the newer one if you don't intend to use it.
After uninstalling you can go ahead and install the newer version.
Regards,
Rave

Similar Messages

  • I have just downloaded a trial version of Photoshop Elements onto my Mac Book Pro (10.9.4) and attempted to use Elements on an existing Photoshop file.  I did not see the Elements option in my filter menu and need assistance

    I have just downloaded a trial version of Photoshop Elements onto my Mac Book Pro (10.9.4).  The installation to my hard drive went fine so I attempted to use Elements on an existing Photoshop file.  I did not see the Elements option in my filter menu and am uncertain as to how to "add" the Elemnts to my existing filter choices.  Please advise.

    I'm sorry but it's very hard to understand what you mean. What filter menu? In which program? Do you mean you're trying to use PSE as an external editor with some other asset management program? Which one?

  • System is not picking up the WBS element from Asset in PO.

    Hi,
    While creating Purchase Order with account assignment category
    as "A"(i.e.Asset), system is not picking up the WBS element from Asset
    Master, even though it is defined in the asset master.
    Please help.
    Thanks,
    Ninad

    Hello Ninad,
    Please, see the SAP Note 21583. I think it might be of help for your case.
    Best regards,
    Esther.

  • I had purchased Adobe Premiere Elements along with Adobe Photoshop Elements for my MacBook Air

    I had purchased Adobe Premiere Elements along with Adobe Photoshop Elements for my MacBook Air OSX Mavericks. Due lack of space I had to reiinstall OSX and could not retirieve from Seagate Back-up drive software in workable condition. Options please?

    yehudaleib
    All you should have to do is to go to the Adobe web site http://www.adobe.com.
    Sign in with your Adobe ID and Password.
    Then go the web page's Search field and type in "My Orders".
    Follow the "My Orders" link to your orders, find the order corresponding to the version in question.
    There should be an opportunity there to download a new set of installation files.
    Do you have your purchased serial number? If not, I am not sure if it will be included in the "My Orders"
    area. But, it should be in the "My Products" which you can access from the Search field. Click on the
    name of your product in "My Products", and the serial number should be revealed.
    Please let us know the outcome.
    Thank you.
    ATR

  • WBS Elements and Asset Under Constructions have different Cost Centers

    Hello Experts,
    We have created a WBS element in one of the projects.
    As per standard process, when we create the WBS Element the Asset under construction is also getting created through the settlement rule within the WBS.
    These assets should have the same Cost Center as the WBS has. However we are in a situation wherein the Cost Center in the asset under construction is different than the Cost Center in the WBS.
    I have checked the settings like automatic account assignment, etc but all settings look correct.
    Can you please explain first what could be the reason for such a difference between Cost Centers in WBS and AuC's and what is the solution to avoid it in future?
    Thanks in advance
    Leena

    Thanks for your replies...
    @ Alex - There is no Investment Programme ID maintained for this WBS in question since there is no IM for this project.
    @ Abdul - Please elaborate more on Validation and Substitution.
    Regards,
    Leena.

  • Do you have to purchase Photoshop Elements in addition to Photoshop Lightroom?

    I currently have Photoshop Lightroom 5.  I am attempting to use the stamp option in the sketch filter.  I can't find it in Lightroom.  Upon investigating, I believe that you must use an external editor such as Photoshop Elements.  Is this correct?  Do you need to purchase this as well?

    These are separate programs which can be purchased individually or in combination, your choice. Many people use Lightroom for organizing and editing, and then they also use Photoshop Elements for additional editing power which goes beyond the feature set of Lightroom. Since Lightroom does not have a stamp option in the sketch filter (it doesn't even have a sketch filter), this would be a case where if you needed to do that you would have to use Photoshop Elements or the full Photoshop.

  • How to use WBS element in Asset master data upload

    Dear All
    Does any body know how to treat field WBS element in Asset master during upload.
    Field POSNR in table ANLA is of 8 characters, but WBS element which is entered in asst master is more than 8 char.
    I vaguely remember tht with wbs system internally assign a different number.
    Has anybody come across this issue?
    Please help
    Thanks
    Sanjeev

    There are in the asset 2 fields for PS
    One is filled when you do an settlement from an WBS (is not possible to fill in)
    The other one you found in the the tab time dependend like cost center.
    This field is available when you have assign the possibilety to do depreciation to an WBS.
    Paul

  • WBS element in Asset Master (Period Dependent Tab)

    Hi
    I have activated the WBS Element in Account Assignment Object in Asset, which has resulted in WBS Element field has appreared in Period Dependent Tab.
    But the issue is that its grayed-out & i am not able to fill-in any data in it.
    Can you please infrom me how can i activate WBS element in Asset Master ( Period Dependent Tab)
    Regards
    Ashwin

    hi,
    goto asset master screen layout and put tick mark under time dependent data.
    govind.

  • I have bought elements 11 premiere and photoshop. can i install to both my computors, pc and mac

    I have bought elements 11 premiere and photoshop. I have two computors PC and a Mac. Can i install them into both computors. Do i use the same licience number.

    Yes.
    Photoshop Elements and Premiere Elements are two of the few Adobe products which come with a multi-platform serial number: Mac and/or Windows.
    You're allowed a maximum of two activations per license. So you can install them on Mac/Mac, Win/Win or Mac/Win.

  • Premiere Elements 8.0 disables Photoshop 4.0

    Premiere Elements 8.0 disabled my Photoshop 4.0 when it was installed. Why? Premerie Elements 8.0 Crashes more often than it completes. Why? It crashes on simple things such as scrolling Edit Effects. Premiere Elements 8.0 and Photoshop 4.0 are both running on a Dell 360 Workstation, Intel Pentium 4 2.80 GHz Processor, 1.5 GB of RAM, Windows XP Professional with Service Pack 3,  C: Drive 200GB, D; Drive 500 GB.
    Regards
    Tom Fineran
    [email protected]

    Your machine is low powered to run PRE8. 2GB RAM is really the minimum but you will have more success with 4GB. Your Pentium processor will struggle with HiDef.
    Working through these basics will help:
    Install all Windows Updates.
    Install latest version of Apple QuickTime (v7.6.8 at time of writing). Even if you don't use QuickTime, PRE relies heavily on it.
    Install most recent graphics and sound drivers from the manufacturers web sites.
    Run Disk Cleanup.
    Run Defragmenter.
    Temporarily disable any anti-virus realtime scanning.
    And please provide the following information:
    What camera did the footge come from?
    How did you get the footage into PRE?
    Use the GSpot Codec Information Utility to analyse the file and post screen image.
    Post back here with the necessary information described here: Got a Problem? How to Get Started
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • If I'm copying text and/or vector elements from Indesign to Photoshop how come their pixel sizes change even though I opened the same sized document and my indesign file is a web file?

    If I'm copying text and/or vector elements from Indesign to Photoshop how come their pixel sizes change even though I opened the same sized document and my indesign file is a web file?

    >my indesign file is a web file
    Pardon?
    Or do you mean that, when you created a new document, you choose Web as intent maybe?

  • Premiere Elements 7.0 and Photoshop Elements 7.0

    I currently run Premiere Elements 4.0 and Photoshop Elements 3.0 on a Dell Pentium 4 Dimension 8300 with 3 gigs of Ram with Windows XP. I am considering upgrading to Premiere Elements 7.0 and Photoshop Elements 7.0. Will Premiere Elements 7.0 allow me to import my Premiere Elements 4.0 projects, or do I have to keep PE 4.0 on my computer? Also, will Photoshop Elements 7.0 import my Photoshop Elements 3.0 Collections (as created) or will I have to re-Tag my photos as well as organize them into Collections again? Thank you.

    David,
    >Also, will Photoshop Elements 7.0 import my Photoshop Elements 3.0 Collections (as created) or will I have to re-Tag my photos as well as organize them into Collections again?
    In general I think that your PSE 3 tags and collections will be carried forward when your catalog is upgraded from PSE 3 to PSE 7. What were "Collections" in PSE 3 will become "Albums" in PSE 7.
    Now it is very important that in the PSE 3 Organizer BEFORE your catalog is upgraded, you do
    -- Reconnect All Missing Files
    -- Catalog Recover
    These commands are available from the File menu of the PSE 3 Organizer. They "clean up" your existing PSE 3 catalog and a clean catalog can avoid many potential problems during the upgrade process.
    You did not ask about any "Creations" in PSE 3 and I do not think the Creations (Slide Show or Photo Book is an example of a creation) will carry forward from PSE 3 to PSE 7. So it is good if the info that you do need is the PSE 3 Collection rather than a PSE 3 Creation.
    Here are some Adobe techdoc references about upgrade to PSE 7 Organizer
    http://www.adobe.com/go/kb404990
    http://www.adobe.com/go/kb404991
    and in general I would scan the list of top issues techdocs at
    http://www.adobe.com/support/photoshopelements/
    The 2 I suggested above are on that list.
    Be aware that the format and folder locations of the PSE catalog changed significantly between PSE 5 and PSE 6 (the 1st techdoc discuses this), so as you are migrating from PSE 3 to PSE 7 there will be some difference and how much you notice differences may depend on how deep you went in to PSE 3. The second techdoc, which discusses placing the PSE catalog in a non-standard folder location is one example of such a case. I say this not to scare you, but instead to make you aware of the potential for differences if there is initially a glitch in the upgrade process on your system.
    Also, I strongly recommend that you give the PSE upgrade part of your question broader exposure by posting it over on the Photoshop Elements forum in the Technical Issues subforum at
    http://www.adobeforums.com/webx/.3bbb4ab0/

  • How do elements organizer and adobe photoshop elements relate? Unclear how/where to save edited photos

    I don't understand how elements organizer and adobe photoshop elements relate - how/where do I save edited photos?  I tried to save them on my hard drive and the result was a 65 MB file!!!  Not sure what I'm doing wrong :/ - maybe I'm saving the entire folder every time instead of just an individual photo?

    There is no standard field for faces. To transfer information you must put it in the standard place that the new program will use. That does not exist for faces. One work around would be to use keywords. You include the available metadata in a photo by checking all if the boxes when you export the photo(s). What the receiving program is determined by the authors of that program. All iPhoto can do is write what it offers to the IPTC & EXIF fields which it will
    LN

  • Encore 1.5 Links to Photoshop Elements 7 instead of Photoshop CS3

    My platform is Windows XP Pro and I am using Encore DVD 1.5. I also have installed Photoshop CS3 and Photoshop Elements 7, the latter primarily for its cataloging abilty of digital media. When I click on an Encore menu to "Edit in Photoshop," Photoshop Elements opens instead of Photoshop CS3. There is no preferences option in Encore 1.5 to select which Photoshop application to open. Is there a Registry entry that would allow me to open Photoshop CS3 to edit Encore 1.5 menus?

    Right-click any .psd file on your system and choose "Open With..."
    Tell Windows to use PSCS3 and then check the little box that says to use this program all the time for this type of file.

  • Should I uninstall photoshop elements 10 befrore installing photoshop elements 11

    should I uninstall photoshop elements 10 befrore installing photoshop elements 11

    Hi eclayton18,
    It's recommended to uninstall the older version before installing the new software if you dont intend to use the older version.
    But if you want to use both versions you can install and have both on the same machine.

Maybe you are looking for