Elements 11 - when I try to print a photo, I get this message "photoshop can not print this document"
What do I need to do when I get this message? "Photoshop can not print this document"
Those pixel dimemsions have aspect ratios that are not the same as a 5 x7 print:
1360 x 1360 = 1.0
790 x 640 = 1.23
2048 x 1366 = 1.5
An 7 x 5 image = 1.4.
So you'll need to crop the images to 5 x 7 before printing. The first two images are a little light in the pixels to produce a high resolution 5 x 7 print.
Happy Holidays
Similar Messages
-
When I try and download an app, I get a message "MZCommerce.CreditBalanceMismatch.Mobile_message". This is even for free apps, and I do have plenty of credit. Can anyone help please?
With a standard account you need a valid payment method even for free apps.
From the message it sound like there is something wrong with your account or some of the information you entered in the account is not correct.. Verify that the information is correct and then if still problem contact iTunes.
Contact iTunes -
I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.
Hi Hardy Tasso,
Are you seeing this problem since first launch of PSE13 after installation or recently?
Please try:
Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
Thanks,
Anwesha -
HI,
I got this problem : when i want to download the new version of iPhoto, i get this message : You can not update this software since you do not have the main version. What should i do ?
IPhoto was already on my MacBook Pro when i bought it.
Thank you for your help
ThierryWelcome to Apple Support Communities
Open App Store > Purchases, and see if iPhoto app is listed. If not, unhide it > http://support.apple.com/kb/HT4928 Apart from that, check that iPhoto is in Applications folder. If not, put it in this folder.
If nothing works, remove iPhoto, open App Store > Purchases, and install iPhoto free of charge -
I have a MacBook Pro that is 2 years old and is up to date with updates. All of a sudden when I attempt to open i photo I get a message that says it is either damaged or incomplete and cannot open. Any ideas on how to fix this?
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always. -
I downloaded the season of a TV show on my ipad-there are 5 of the episodes that wont download. When I try to down load them separately-it come across with message (you may not redownload this).
Anyone????
-
I edit a photo and when I click Save As, I get error message "Could not complete your request because of a program error." I exit Elements, try again, same error.
In past I had this problem but it resolved when rebooted PC. This time, PC reboot does not help.
I cannot save anything i do in elements!!
What's wrong? Any suggestions how to fix this? Anyone know what the program error isPlease mention your PSE version and underlying OS.
Also, it would be of great help in resolving the issue if you can upload a snapshot of error message.
Regards
Kishan -
I can't insert a jpeg photo.Photoshop General Discussion
Can you OPEN the photos in the normal way in Photoshop, using Open from the File menu?
-
So I dont know what to do. can you please suggest something?
thank youAre you sure your AppleID is NOT tied to the US store? If you are trying to buy an app from the Swedish store you will be unable to do that. Some apps are only available on certain stores. That is why you get the "Cannot connect to the iTunes store" message when trying to buy that app. Your updates are being done from the US store ; thats why you can update sometimes and sometimes not.
If you keep encountering problems contact iTunes support. They will help you sort it out. -
All of my other programs will open in Creative Cloud but whenever I try After Effects I get that error messaged. I have everything updated and I have tried uninstalling and installing again but I still get the same error message.
Your AE is not up to date. 12.0 will not work on OSX 10.9.3
Mavericks broke some things.
You need the latest update to CC which is 12.2.1.5 (although they're releasing another update later this month).
Although, technically you don't need the latest update as the 12.0.1 update made AE work with Mavericks -
Toshiba laptop, windows home 7 firefox preferred user.
I cannot be sure but I think this problem arose after installing Firefox. New messages now not notified.The Statusbar is gone and the "lock" with it. Security information about a web page is shown by the Site Identity Button.<br />
https://support.mozilla.com/en-US/kb/Site+Identity+Button
You can add a padlock to the location bar with the Padlock add-on- https://addons.mozilla.org/firefox/addon/padlock-icon -
Photoshop can not print the maximum amount of data that can be spooled to a PostScript printer is 2G
Hi all,
This is the first time I've worked with the .psb (large format) size and I have gone to print a PDF of the file and I get the message:
"photoshop can not print this document because the document is too large. The maximum amount of data that can been spooled to a PostScript printer is 2GB".
The file itself is a 2700x1570mm 300dpi flatten .psb image that is 500mb in size.
Not sure how I can get around this, where abouts do I see the image size information that is being spooled?
Any help would be greatThere's no easy way to see the size of the image that's being spooled, but 2G limit is uncompressed, 4 bytes per pixel (either RGBX where X is a padding byte, or CMYK, depending on the image / printer), times about 1.6 because the image data is sent in ASCII85 format rather than binary.
With your image at over 100 inches at 300 dpi, you're also perilously close to the 32k limit on the pixels in any one dimension (31,900 by my calculations) that PostScript can handle.
The limits are 32767 pixels in either dimension, and 2GB of data total. The data that's sent at 4 bytes per pixel, and converted to ASCII85 so that it'll make it across any connection. ASCII85 gives about a 1.6 expansion factor, if I remember correctly.
Do you really need a 10 foot image printed at 300 dpi? If not, changing down to 200 dpi will probably let this image print. -
My trial version lasted only 1 hour. When I try to edit a photo I get a "Trial has expired message"
My trial version lasted
only about 1 hour. When I try to edit a
photo I get a message "Your Trial has expired" and it asks for my license key. How do I get 30 days of trial?I changed some dates on some photos.
I think that is when my Trial expired. I deleted Photoshop Elements 8 and reloaded it. My trial was still expired. I have since purchased the product. Thanks for your help. -
Elements 12, Epson Artisan 1430, "Photoshop can not print this document"
I recently upgraded to Elements 12 and also got a new printer, Epson Artisan 1430. I got some great prints and then one day, it stopped working. Elements error. No error number just a message, "Photoshop can not print this document" I tried restarting the program, the printer, and the computer. No luck. Tried different graphic files; no luck. The printer works with all other programs beautifully. I cannot find help anywhere on Adobe forum. Running Windows 7
John, I deleted the printer and deleted those folders and reinstalled the printer using the printer menu. When I tried the apple software update it said my software was up to date and didn't offer an option to get updated print drivers. I tried printing again and the same thing happened.
Syd,
I am trying to print from the Macbook to the Artisan entirely over a wireless network. The Macbook has not been plugged directly into the printer or to the router at any point in this. I did try what you suggested, resetting the printing system, and as earlier it did not offer any software updates when I looked for one. I tried printing again and the same result.
I dug around some more directories and found some more files with the epson name in there and deleted those and then attempted to reinstall using the printer setup page, and then again tried a software update and again it didn't find any new drivers, and of course the same printing error occurred again.
It sure appears that the MacOS is holding onto drivers somewhere that I cannot discover because when I reinstall the printer it takes it all of 3-4 seconds to install, and when I try to do the software update it is not finding any new drivers anywhere.
Syd, I agree that there seems to be something specifically corrupted about the printer driver itself, however, but is there another way to remove drivers?
Should I try uninstalling everything and attempting a USB installation to see if prints that way? -
When I try to open iPhoto (9.2.1) it says 'You can't use this version of the application iPhoto with this version of OS X. All my photos are on there. Please help. Thank you.
Did you upgrade to a new MacOS X version? Then you need to update iPhoto as well.
Only iPhoto 9.6 is compatible with MacOS X 10.10 Yosemite. Update from the Mac App Store.
Backup your iPhoto library, if you do not have a current backup.
Launch the App Store, click the "Store" menu, and sign in with your current AppleID.
Check the "Updates" tab of the App Store for an iPhoto update and run the update.
When you laugh iPhoto after the update, it will warn you, that the library needs upgrading, That may take a while.
Just in case that you see a warning, that the update is not possible because of an error message: "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
Uninstall iPhoto by deleting it from the Applications folder, but do not empty the Trash, so you can put iPhoto back, if need be.
Launch the App Store, click the "Store" menu, and sign in with your current AppleID.
Open the main page "Featured" of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support to sort out the AppleID. Use this link: http://www.apple.com/support/mac/app-store/contact/
Maybe you are looking for
-
My iPhone 3Gs, cannot switch on and detect by iTunes after plug in USB
Hi, I am facing a problem, the scenarios as i connect my iphone using my MBP, than it alert me with updating IOS, from my current version IOS 6 to IOS 6.1.2. After a series of downloading the update from iTunes, the phone restarted as normal process,
-
after tabs bar fills up all flash in both programs. I have no control over the computer,can't stop, cutting power. Mac version 10.4.11 Machine Name: Power Mac G5 Machine Model: PowerMac7,3 CPU Type: PowerPC G5 (3.0)
-
for example 8pt doesn't look like 8pt, how do I fix this problem?
-
Not sure where to ask this. I just wanted to know when approximately they release new versions of the touch? I realize no info about new ones has been released but I am trying to get an estimate as to when the others were released and when we might e
-
The "Library Albums" component (with star ratings etc.) does not appear on my Library Inspector tab. I downloaded A3 about 3 weeks ago, and it has never appeared. Am I missing something or misreading the documentation?