Emac will not connect to LCD projector while running iMovie

I am working on an eMac running 10.3.9. We have the eMac connected to an LCD projector in a computer lab setting. Things work fine - until we try to run iMovie on the projector. A message appears on the screen asking for a resolution of 1024 X 768. We have changed the resolution on the computer numerous times - yet the projector gives us this message each time. When the computer is unplugged from the projector - iMovie runs fine. We have successfully used this emac and the projector for iMovie earlier - today things have not worked!!!!!
Any help would be appreciated!

Hello Roger, if you have them installed in 10.6.7: Uninstall Virusbanner and Content Barrier (use a good Uninstaller). You don't need them at all. Instead in OS10.6.7 check if you have the Snow Leopard security update 003 installed (of which the database is almost daily updated automatically), in Lion already installed.
In Lion also do not use these apps, same story (malware db almost everyday auto updated).
It should work after that, if you do not have "exotic" system settings.
Lex

Similar Messages

  • My wireless internet is working with all of my other devices but my imac will not connect to the network?

    Can anyone help?  My wireless connection is working on both my iphone4S and my ipad2, but my Imac will not connect to the network.

    First run Software Update to make sure your iMac is up-to-date.
    Even though things are working OK on other devices there may still be issues with your modem or router so it's best to start there. Locate the manuals on both devices and reset each. Do the modem first then the router. Next make sure the router has up-to-date firmware. If the problem continues after updating resetting and updating both devices then download and install iStumbler and let it run for about 30 minutes. iStumbler will scan your area for the Wi-Fi networks being used, pay attention to the channels each network is set to. Most routers are  pre-set to channels 5 or 6 and if you are in a congested area and all the routers are set for channel 5 or 6 then you can see where there might be a problem. Set your router's channel to one not being used in your area, you have at least 14 channels to choose from. Also check to see if your router is using 802.11n, if it's not then it would be wise to upgrade the router to a faster device.
    Next is if you are still having issues the problem could be your ISP's DNS settings. If you want to learn about DNS please read CNET's DNS Article and MacWorld's DNS Troubleshooting . Then use the instructions below to reset the DNS settings:
    1. System preferences
    2. Network
    3. Click Advanced
    4. Click DNS tab
    5. Click + sign
    6. Add 208.67.222.222
    7. Click + sign
    8. Add 208.67.220.220
    9. Click OK.
    10. Exit System Preferences

  • My Macbook Pro will not connect to my Server

    I have a new mac book pro and it will not connect to my mimi server running X Server. My iMac and PCs will connect just not the new mac book...any advice?
    I also have 20 questions about general server operations...help anyone?
    Chuck Montana

    OK - here is the the ifconfig output
    {CODE}
    IFCONFIGLast login: Tue Jan 25 15:41:00 on console
    ChuckandGinas-MacBook-Pro:~ Montana$ IFCONFIG
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    inet 127.0.0.1 netmask 0xff000000
    inet6 fd53:ca8e:fb14:7019:cabc:c8ff:fe8a:d874 prefixlen 128
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0 mtu 1280
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether c8:bc:c8:8a:d8:74
    media: autoselect
    status: inactive
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 78:ca:39:b7:bd:76
    inet6 fe80::7aca:39ff:feb7:bd76%en1 prefixlen 64 scopeid 0x5
    inet 192.168.1.102 netmask 0xffffff00 broadcast 192.168.1.255
    media: autoselect
    status: active
    fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
    lladdr 78:ca:39:ff:fe:1f:f1:00
    media: autoselect <full-duplex>
    status: inactive
    utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
    inet6 fe80::cabc:c8ff:fe8a:d874%utun0 prefixlen 64 scopeid 0x7
    inet6 fd00:6587:52d7:c0:cabc:c8ff:fe8a:d874 prefixlen 64
    ChuckandGinas-MacBook-Pro:~ Montana$
    {CODE}
    {CODE}
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    inet 127.0.0.1 netmask 0xff000000
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0 mtu 1280
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether d4:9a:20:fd:bf:b4
    media: autoselect
    status: inactive
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 90:84:0d:f4:e1:06
    inet6 fe80::9284:dff:fef4:e106%en1 prefixlen 64 scopeid 0x5
    inet 192.168.1.103 netmask 0xffffff00 broadcast 192.168.1.255
    media: autoselect
    status: active
    fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
    lladdr d4:9a:20:ff:fe:fd:bf:b4
    media: autoselect <full-duplex>
    status: inactive
    mini:~ montanafamily$
    {CODE}

  • WePresent will not connect Casio projector to MacBookPro

    I downloaded WePresent from Casio, but still cannot connect to my MacBookPro running 10.9.
    The Casio projector is a XJ-A245V. Following the WePresent directions, I am supposed to connect to one of the wireless "mobishow" options, but they are not available. Only the"default" wireless options are available, and the manual states that these will not connect to WePresent.
    If anyone has suggestions, I'd be happy to hear them!

    The Keyboard is connected to my computer though a midi to USB cable.
    And that is in a midi-out plug?
    You have selected a Software instrument track, when you are playing the piano? What instrument have you selected? Which octave are using on the keyboard?
    Sometimes GarageBand will not play the sound at first, unless you record to the track at least once. Do you see notes in the Track editor for the track appearing, when you press the record button, before you start playing?
    To check, if GarageBand is reading your keyboard at all, I'd first try to record to test track, that you can delete later. Show the Track editor while playing.
    Also show the Musical Typing Window (⇧⌘K). That should mimic the keys, that you are pressing on your keybord. This way you will see what GarageBAnd is reading from the midi.
    If GarageBand reads the notes, but jyou just can't hear anything, set all volume sliders to maximum, try a different instrument, try a different octave.

  • I've been working on our church website and suddenly, my computer will not connect to the site. I keep getting a message saying that the the connection to the server was reset while the page was loading. Does anyone have any ideas of how I can fix this?

    I've been working on our church website and all of a sudden this week, my computer will not connect to the site. I keep getting a message saying that the the connection to the server was reset while the page was loading. Does anyone have any ideas of how I can fix this?

    The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
    *[[/questions/918127]]
    *[[/questions/918028]]

  • My iPhone connects to a hotel network but my iPad3 while it shows connected will not connect to the Internet.

    My iPhone connects to a hotel network but my iPad3 while it shows connected will not connect to the Internet.

    Welcome to the support community group.
    First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
    Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
    First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop.  Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back  for 15 - 20 seconds while you reconnect it to power.  Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
    Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
    Then run the airport configuration utility from your laptop.  Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility.  Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
    Check back if you're still having problems.

  • Highlighter does not appear when connected to LCD projector in Keynote v2.2

    I connected my iPad 3 to Apple VGA adapter (A1368) and I was doing a presentation with Keynote v2.2. In the presentation mode, I press-hold the screen, and the highlighter tools did not appear. I am sure I did the right thing to do to get the tools.
    However, when I do not connect to the projector, I can get the highlighter tools in the presentation mode on my iPad screen.
    What is wrong?

    Hi, have you run the hardware test from the osx install cd? That should eliminate the 'bad video card' if the MBP tests OK.

  • New Video iPod will not connect

    I have a new video ipod that will connect on one computer but not the one I want to use. I have reloaded itunes several times and checked firewall. When I plug the ipod in the computer makes three dings. Is this an error code of some type? It will not show up in diagnostics and after trying it shuts down internet connection until computer is re-booted. It connects fine on the other computer. Has anyone got any answers? I have tried different plugs and it shows to charge just will not connect.
    video   Windows XP   Sony Media Station Both computers

    You want to check and see if the other computer has usb 2.0 first.
    If it does try to reset the ipod while it is plugged into the computer. Reset is the menu and the center button on the ipod. Also make sure the hold switch is all white.
    Also you want to make you that you try different usb ports.
    If that doesn't work use msconfig type that into the search here on the support page let me know if this works.

  • New Ipad wifi will not connect!!!

    My Ipad will not connect to wifi anywhere since I have updated it to ios6. At home I have done everything under the sun to try and fix this problem that I have found on the internet. At home I have several ipod touch's, iphone, mac, apple tv, everything connects to my wifi except my ipad. I have reset Networks, Restored my ipad several times and nothing is working. I have tried to connect t several places besides home and it will not connect. Can someone please help very FUSTRATED!!!

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT4972 i connect my iphone to my pc and i tunes open automatically,then i press dowload and update but itunes say am not connected to the internet while my pc is connected to the internet what isi the problem?

    i connect my iphone to my pc and i tunes open automatically,then i press dowload and update but itunes say am not connected to the internet while my pc is connected to the internet what isi the problem?

    If you are the only user on your computer you probably don't have multiple user accounts set up and can disregard that.  If you are using iTunes 11 go to View>Show Sidebar.  Now see if your iPad appears under Devices on the left side when you connect it.  If it does, click on the name of your iPad on the left side and your iTunes sync settings options will appear in folders with tabbed headings to the right.
    If it doesn't appear on the left side, follow the troubleshooting steps shown in this article: http://support.apple.com/kb/TS1538.

  • HP Officejet 8500A Plus will not connect to router.

    A couple month ago I had this printer up and running on my network fine. I use a Cradlepoint MBR1200B router with a Verizon wireless aircard. We took the printer out of the office while we were remodeling, we went to go back and hook it up after the remodel was complete. Now it will not connect back to our router. It's weird the printer will connect fine to my other verizon hotspot, but not the cradlepoint router with usb modem. We have an Officejet 6500 upstairs that is connected to the cradlepoint and is working great.
    I have tried what seems like everything from resetting the network setttings on the printer to default and tweaking the security on the cradlepoint from WPA2 to WPA/WPA2. Still nothing.
    Also when I choose to print a test report after getting the error on the printer it prints out a sheet that says.
    "More that one access poiint/wireless rougter has been foun that mathes your wireless network name (SSID). IF this is not inteded, your HP printer may connect to the wrong wireless network. If you cahne your network name you will need to configure the SSID on all wireless devices to match you new newwork SSID."
    The only wireless network we have in the house is the cradlepoint router???? We have the hotspot too, but that is not even turned on. Even so the SSID's for them are not even remoteley similar.

    Hello Fost325,
    Take a look at this document, which provides wireless and network troubleshooting scenario's.  Please let me know if this helps.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

    My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

    As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
    I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
    I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

  • My Satellite A25-S279 (WinXP) will not connect to the internet wirelessly since UVerse was installed

    My Satellite A25-S279 (WinXP) will not connect to the internet wirelessly since UVerse was installed. (Rather, I should say
    it 'connects', then immediately disconnects.) When I had regular DSL, there was no problem, but since UVerse installation,
    I can connect ONLY with the ethernet cable.
    Thinking it was my 'old' computer, I took it to the local computer place---they were able to connect instantly (wirelessly) AND maintain connection. Sooo...I've told this to ATT, & had 2 different techs out here, both of whom were very patient & tried EVERYTHING they could think of,  & both of whom failed to fix the problem. They maintain that it is NOT the fault of the modem/router, but is some 'miscommunication' between my laptop & the modem/router.
    Is that possible? Is there a setting I need to change on the laptop? If it worked BEFORE UVerse, and if it STILL works at the Computer store, and if it works WITH the cable, why won't it connect wirelessly?
    Thank you SO much for any thoughts!

    It is possible. While it's not common, sometimes you could have a working router and a working wireless card in a laptop, but they just don't communicate. It sounds like that might be the problem unfortunately.
    - Peter

  • My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data.

    My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My iPod 4th-gen charges just fine in any wall outlet, but when connected to my brand new ASUS Windows-8 laptop's USB 3.0 port the charging process just keeps "blinking" on both the iPod and the laptop and will not connect to Itunes...

    Hi, I HATE to ask for help with this, but I HAVE looked everywhere and Google searched different wordings and have not found anything similar nor a solution to my problem!                                                                                                                                                                                                                               My good old iPod 4th-gen charges just fine in any wall outlet, in any house, but when I connect it to my brand new ASUS laptop that has Windows-8 and 3.0 USB ports using the charging/data cable, the charging process just keeps "blinking" BOTH the iPod and the laptop and it will not connect to ITunes and I get "A Device is Detected" message that keeps popping up and going away over and over right above the Windows desktop toolbar.                                                               When I go to control panel and select "Devices" it does show the iPod, but for only a split second and than it disappears, but than it comes back again for a split second and than it disappears again and just keeps doing that over and over and over!                                                                                                                  I have tried resetting the iPod while it is plugged into the laptop by holding the power and menu buttons, that did no good.                                                             I also tried uninstalling iTunes and any other Apple stuff listed and reinstalling it all, that did NOT work!                                                                                          The iPod, the laptop and iTunes ARE all fully updated!                                                                                                                                                                I AM using a brand new charging/data cable that I just opened up an hour ago (I've learned to keep a few brand new ones around at all times since these piece of garbage rip-off cables hardly last a week, even when you baby them!). I also tried a few old cables, they all do the same thing!                                                       I would like to get this piece of junk to connect to my new laptop, even if only once, so that I can change/delete some songs and transfer a few dozen photos,since I haven't been able to do any of that stuff since my old laptop (that NEVER had any problems connecting) died way back in May! lol.                                                                                                                                                                                                 I hope somebody knows a fix or solution! Thank You!

    Try on another computer to help determine if iPod or computer problem.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

Maybe you are looking for

  • Update the schema for data foundation, business element and business view

    Hi All I am using oracle 11g as backend to develop using crystal reports and I am using Business View Manager as the connection in crystal reports. Now my issue here is I have created the DC, DF, BE and BV using abc schema but as the request has chan

  • I feel stupid asking this but.....

    Hi feel real stupid asking these questions but here goes: - What is the 'Option' key on the keybord? If i want use a hash character how do i do that? when i sign in on my mac i have to type in my password but if i type it wrong it takes me to a windo

  • IPhone pictures not sorted by date in Albums

    I installed the new OS update in my MackBook Air and now I am using the new Photos app. I enabled the iCloud Photo Library function. So far so good, after a while now all of my Albums show on my iPhone, but the pics are all over the place, they are n

  • I need to just capture an image

    I am useing SCCM 2012 R2 for my OSD and I need some help.  I have a computer that has everything I need on it.  When I do a build and capture task it will format the drive and put a exitsing image on it then capture that one.  I need help to just cap

  • Upgrading from GB2 to GB3 need to add  to inst library/own loops etc etc

    if you have examined as i have the innards of GB3 and compared it to GB2 there are many many additions in sampler sampler files, etc... let alone your already saved loops. This is not an easy task. GB2 has stuff 3 dont have and vc versa. I hope that