Email and SMS Alerts - Solution Manager - PI and EP

Hi All,
I am trying to do the below scenario.....But somehow i am lost in the process.
I have a three system PI landscape and a Solution Manager. I have included the DEV PI in solution manager for CCMS,the CCMS agents are online and it also reflects in RZ20.
Now the requirement is SOLMAN should send email and sms alerts in below situations which occur in PI system.
1.The ABAP or JAVA engine goes down.
2.One of the filesystem crosses certain predefined limit.
3.Any of the java server node stops working
4.If any critical job gets cancelled in sm37
I am looking at steps on how to define the alert categories, auto reaction methods, also the nodes where i have to assign these auto reaction methods.
I have gone through CCMS documentations, played all sim files and gone through most of the pdf files but i am not able to establish proper steps to do it.
I am Redhat Linux,Oracle 10g, SOLMAN 7 with PI7
Can i extend the same for the EP systems also which are pure Java Stack Systems ?
Also i would like to know if i can send customized alert messages.
Best Regards
Raghu

Hi Juan,
Thanks for your response.
I am looking at the MTE classes i.e for the above situations which MTE classes are required.
Also i have read in some document that we can send the alerts directly to the email IDs and cell numbers without having to mention them in user masters in SU01. Where to mention these ?
I have my SCOT settings done for email servers.
The process which i had built up in my mind is all mixed up and i am lost where to do which configuration
Best Regards
Raghu

Similar Messages

  • I m trying to send a email and sms alert using php and it works fine on all systems except on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india. plz help

    I m trying to send a email and sms alert to people and it works fine on all systems expect on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india.
    the code i m using is right below,plz have a look and not into the problem as problem is a bit strange.
    $headers = "MIME-Version: 1.0\n" ;
                $headers .= "Content-Type: text/plain; charset=\"UTF-8\"\n";
                $headers .= "X-Priority: 1 (Highest)\n";
                $headers .= "X-MSMail-Priority: High\n";
                $headers .= "Importance: High\n";
                // Additional headers
                $headers .= 'From: Rakesh <[email protected]>' . "\r\n";
                foreach($disemail as $email)
                    $to = $email;
                    $subject = $succMessage['email_subject'];
                    $message = $smsText;
                    mail($to,'=?UTF-8?B?'.base64_encode($subject).'?=',$message,$header);
            if (stripos($_SERVER['HTTP_USER_AGENT'], 'MSIE') !== FALSE) {
            $smsText = utf8_encode($smsText);

    i have tried this new charset combination specifically for iphone and i m waiting for response from sweden alliance.....i hope this works fine as iso works great for 8-bit characters.
    would like to have your thoughts though.
    $headers .= "Content-Type:text/plain; charset=\"iso-8859-1\"\n  format=flowed Content-Transfer-Encoding: quoted-printable";

  • How to get email and sms alerts in 9i

    Hi,
    I want to know that is there any method in 9i by which we may get mail and sms alerts whenever anything goes wrong with the database?
    Thanx

    Why pay for something if you already have it, included in your license?
    Only because you have to read documentation to use it?
    Oracle will sooner or later include functionality in their monitoring products, they don't include in the RDBMS. In 10g you already rather use the controls than call the PL/SQL Apis directly.
    Apart from that: the third party products you seem to promote, usually implement very limited functionality.
    Sybrand Bakker
    Senior Oracle DBA

  • Relationship between Solution Manager Diagnostic and CCMS

    We are just now looking at Solution Manager Diagnostics and central monitoring in Solution Manager.  One thing we are not clear on, and haven't seen anything definitive on, is the relationship between these  and CCMS.
    Any insight or link to documentation would be greatly appreciated.
    Thanks!
    Jeff Henke

    Solution Manager Diagnostics is a diagnostic tool, not a real-time monitoring and alerting tool.  CCMS is for real-time monitoring and alerting, and SMD does in fact get data from your CCMS agents, as well as from saposcol and Wily Introscope.
    Hope that helps,
    David.

  • Solution manager, SLD and SAP MC

    Hello,
    It seems that both System landscape directory and SAP management console have some overlapping features. The services can be started or stopped in both. Is it true? Does anyone know the difference between these 2 and where does Solution manager fit in?
    Thanks
    Shaiikil

    We can stop, start SAP services from NWA. Now we cannot say Netweaver, NWA and MMC are similar...
    MMC is a tool/enviroment provided by microsoft for starting stopping services, managing user rights, security settings, policies and so on...
    this can never be compared with SAP Environment for similarities.
    Feel free to revert back.
    -=-Ragu

  • Solution manager, PI and ERP incl FICA (IS-U) test systems on same HANA DB server Appliance

    Hello
    I wander is it possible to have Solution manager, PI and ERP incl FICA (IS-U). All for test/system purposes:
    I am sure we need separate application servers for Solution manager, PI and ERP incl FICA (IS-U),
    I would have question regarding Appliance i.e Hana DB server. can Solution manager, PI and ERP incl FICA (IS-U) products reside on same Appliance i.e Hana DB server in MCOS or MCOD? (I am sure that for production use this is no-go option)
    What is the case when renting cloud solution?
    Thank you a lot in advance
    Jan

    Check the java part, most of the Solman Web Based thing use the java, check the management console to ensure message server and dispatcher proper work, normally is: http://hostname:50113.
    If central note give you problems deimplement all the not complete implemented notes and use SUM
    and MOPZ to update your system with the last SP, then apply the central note acording to your SP level.
    We found that have the system in the last level prevents a lot of problems because of not complete implemented notes.

  • Backup and restore on solution manager in Windows

    Dear Team,
    I have one windows 2003 server in this 3 Harddisk Drive C , D , & E . In this solution manager and saprouter is installed.
    Now I want to move all these installation and data in other system.So that these same think Proper run in other system.l
    How I take the backup of old system and Restore in other new system.
    Because in this BRTOOLS not running.
    Whats is the process of take the backup and restore of solution manager in windows environment.
    pooja

    Hi,
    Solution Manager is dual stack system (ABAP+JAVA). Please refer this useful system Copy guide [How to System Copy ABAP and JAVA|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f055cbd0-97f1-2a10-c09a-907b811de000?quicklink=index&overridelayout=true] to get more detailed information.
    You can use Database Independent or Database Specific method to perform such System Copy.
    You can refer this useful document [Homogeneous-System-Copy-using-OnlineandOffline-ORACLE Backup|http://www.basisconsultant.com/component/remository/Sytem-Copy-Guides/Homogeneous-System-Copy-using-OnlineandOffline-Backup/] to get step by step details. In Database specific method you will have to create JAVA export also in ABAP+JAVA stacks system.
    Regards,
    Bhavik G. Shroff

  • How to config and implement SAP Solution Manager

    Hi,
    We have to  config and implement SAP Solution Manager.
    So plz suggest me the steps to be taken.
    From where we have to start config and implement SAP Solution Manager.
    Regards,
    Radhey Shyam

    Hello Radhey,
    I would suggest you take advantage of the documentation and simulations available in the Solution Manager Ramp -Up Knowledge Transfer area - http://service.sap.com/rkt-solman.
    The areas are broken down by  section and links  such as Overview Build, Config, Deploy, Operation, Optimization, etc are provided. There are many hours of tutorials.
    If you are just starting out, this information is invaluable.
    Regards,
    Paul

  • Solution Manager DEV and PRD box

    In my landscape i have 2 systems for solution manager SMD and SMP , what is the ideal way sap community is using them ...should i divide the solman roles among them or how the 2 system landscape of solman is used ..
    Regards

    Hello Tiger,
    In my experience many SAP customers have a one or two system landscape in Solution Manager.
    For customers whose main line of business is providing service with the Solution Manager, I would recommend a three system landscape (dev, qas and prd). For customers who run less critical functionality with Solution Manager, and when costs of hosts for the Solution Manager systems are an issue, one or two tier system landscapes can be also considered. Other than this, I don't know any document with precise guidelines to answer your question. At the end it all depends on the scenarios you want to run, and how critical the functionality you run with Solution Manager is for your company.
    Best regards,
    Miguel Ariñ

  • Solution Manager IBASE and R/3 assets

    Hi,
    In R/3 we have our Assets (tcode AS02) and we are using the tables ANLA, ANLB, ANLC, ALNH, ANLP and ANLZ.
    We want to setup the IBase in Solution Manager with data from the R/3 Assets. What I mean is, how can we import the Assets from R/3 in the Ibase of Solution Manager.

    Hi
    Check the links
    [https://websmp108.sap-ag.de/~sapidb/011000358700000894082006E.sim]
    [http://service.sap.com/rkt-solman] --> ur Solman version --> Overview and setup of solution manager
    Hope this helps you
    regards
    Naveen

  • Receive billing email or sms alerts

    You can get an email or SMS sent to yourself when your bill arrives, using My Account online.
    If you haven't yet registered for My Account, registering will give you access to manage your bills and accounts online, in your time. To register, see My Account for new users.
    For registered users, follow these instructions:
    Step 1
    Log into My Account
    Step 2
    Select Bill & Payment settings
    Step 3
    If you don't already have email bill, select Switch to email bill.Enter your email address, re-enter it, accept the terms & conditions and save
    Step 4
    Select more options.You will be taken to the Bill Delivery & Reminders page. Make sure the correct account number is selected.In Set Your Reminders, tick whether you'd like to receive your bill reminders by email, SMS or both for each of the four available times:
    when your bill becomes available
    2 days before your payment is due
    when your payment is late
    when a scheduled payment is processed
    Enter the mobile number you wish to receive the messages on (if applicable), and confirm the email address is correct
    Step 5
    Review the information and if it's all correct, select Update.

    Re: Receive billing email or sms alerts
    I currently receive an email to advise my account is available included is an attachment containing the actual bill.
    however now that attachment is missing and I do not know which account it refers to.
    I do not wish to use the Myaccount facility as I already have too many passwords etc to use and remember & at my age I suffer some memory loss. If the previous attachment method is no longer available I will have to return to the unreliable Aust post system where my mail often fails to arrive. Due to various medical conditions I am often not at my residence. but am able to keep track of incoming bills by email.

  • Email and sms alerts against Quality Notifications

    I need to send an e-mail and an sms alert to various people within the organisation and to the respective vendor whenever I create a Quality notification. I also need to attach a copy of the print out of the notification in Smart form alongwith the mail. Please suggest.
    Regards
    Sudhir

    Hi,
    You can send the e-mail to all concerned via standard workflow or via using some exits at the time of saving of notification also.
    Thanks
    SUMIT

  • How to configure rz20 and dswp in solution manager ?

    Hi all,
    I have configured the ccms agent and ccms ping in the satellite system and all the connectivity with solution manager.
    but then i haven' got the idea how to configure the template in the RZ20 and DSWP ?
    Please advise on document / blog etc regarding this kind of configuration ?
    Thank you and Best Regards
    Fernand

    Hi
    check below link:
    DSWP: http://help.sap.com/saphelp_smehp1/helpdata/en/8e/3ad6f807e147669036d2a6aed597aa/content.htm
    RZ20: http://help.sap.com/saphelp_nw04/Helpdata/EN/17/550c404a435509e10000000a1550b0/content.htm
    Thanks
    Sunny

  • Solution Documentation: Define WMB and ATG in solution Manager

    Hello,
    I am working on solution docuemtnation. and looking for some help to define the NOn SAP system like WMB or ATG in solution manager landscape defination.
    Solution Manager version is 7.1
    Regards,
    BA

    Hi Bhavesh
    This is a good question to me as I have no knowledge about IBM Websphere at all.
    But at my opinion, you will need an "Websphere Appserver by IBM" (nothing else than IBM Websphere) to run the IBM Websphere Message Broker on. And therefore, you should go on assigning your Message Broker as product instance of the "Websphere Appserver by IBM".
    If the IBM Websphere Message Broker is not a product part of Websphere (App)server, you should create a new product. Secondarly, if the version of your Websphere Message Broker differs from the ones provided by SAP (right pane "Productversion"), you will also need to create your own product, as they are not changeable if provided by SAP.
    A third point to think about is, that if you would like to point out, that there is a real difference between the IBM Websphere Message Broker and (perhabs separatly installed) IBM Websphere Appserver, you should create your own product.
    Last, but not less important: If you use the "Technical System Monitoring" of Solution Manager (see Solman Setup), you shoudl check, if there is are any templates for checking an Websphere Appserver provided by SAP. If so, you will need to assign your Message Broker as "Websphere Appserver" in order to use this monitoring template.
    Best regards,
    Michael

  • BPM, Solution Manager, XI and Workflow

    Hello all,
    I read that in XI/P, BPM uses the Workflow engine.
    I also heard about the BPM in Solution Manager.
    What is the difference between BPM in Solution Manager and BPM in Workflow? Do both systems use the old Workflow engine?
    TIA

    .

Maybe you are looking for