Email client problem with 11.0.3

I recently upgraded to Reader 11.0.3 and evertime I lauch the application I get an error message along the lines: "This application has failed to start because GAPI32.dll was not found. Re-intalling the application may fix this problem", followed by "Either there is no default email client or the current mail client cannot fulfil the messaging request. Please run Microsoft Outlook and set it as the default mail client."
I am running Windows XP SP3 with Outlook 2000 as the default mail client and have gone through the MS fix for missing GAPI32. The point is, I DO NOT want Reader to email anything for me at any time. I prefer to go into Outlook, prepare an email and attach a PDF. Reader works okay but I am getting pretty cheesed off with having to OK the two error boxes everytime I open a PDF.
Can I just remove the email facility from Reader? In Edit|Preferences Email Accounts, I get "Default Mail Application (Microsoft Outlook)" but the delete button is greyed out.

Timcarson1 in general the error message you received is accurate. Have you tried applying the update under a local administrator account to see if you face the same difficulty? If not then please work with your computer department to allow this test to occur.

Similar Messages

Email Client Problem with HP Scan to Email Automator

Whenever I use the screen features on my HP Photosmart D110a printer and select scan to pc and then email PDF it opens HP scan just fine using the Email PDF Automator and the document scans perfectly but instead of being sent to Outlook 2011 it gets sent to Apple Mail. I can't for the life of me find out how to change the automated destination. Outlook is set as the default browser but it always goes to Apple Mail. Can't seem to change it through HP Utility. Any help would be much appreciated.

It is the responsibility of the printer manufacturer to update their drivers, not Apple.
Can you print?
Have you checked the manufacture's web site for an updated driver?

Send Smart Forms within emails (html) Problems with format

Dear all,
the ABAP report SF_XSF_DEMO1 is a demo report which converts a certain smart form into HTML and then sends it as an email in html format.
Sending the email is possible without any problems but I am wondering about the email format.
<a href="http://www.imgbox.de/show/img/e4QvgzsS4L.jpg" title="Bilder hochladen">This screenshot shows how the email looks like.</a>
I am not happy with the email layout as the Smart Form "SF_XSF_DEMO1" is designed in a different way.
What do I have to adapt within the report in order to send an email that really looks like the Smart Form? Or is it a customizing issue?
(I would like to avoid having to send the Smart Form as PDF attachment...)
Thanks for you help!
Kristian Kindler

Hi Kristian,
When ever you send a smartform output as an HTML email, the system generates automatic style sheets which are not supported in many email clients such as Outlook 2007, hence you will face a formatting issue. We faced the same issue and had do it it like this:
Build a BSP page similar to the output which you want to send as an email. Now you can use the BSP URL to send the html email using cl_bcs class.
I have documented this in my article below-
http://divulgesap.com/blog.php?p=NDA=
Hope it helps.
Regards,
Ravikiran

Does Designer ES 3 address the 64 bit email client problems ES2 had?

Hi folks,
Happy new year...
Wondering if anyone knows whether ES3 has addressed the problems with email submit and 64 bit outlook (and similar).
I had to shelve a project mid 2012, that was dependant upon data that was to be submitted by clients using a standard email back button (built in ES 2 8.2) - as the recipients who were running 64 bit systems (particularly those with outlook 2010 64 bit) kept getting the error message that no email client could be found..... I ran up a test system and had the same problem myself. As a fair proportion of the client would by then have already been on 64 bit systems/email clients, that rendered that approach untenable (and there weren't the funds for the full livecycle suite - or reader extensions (unfortunately)
After fooling about with the registry settings it can be got to work - but you can't expect a client to be willing to do that.....
Does anyone know if 64 bit compatibility issues have been fixed in ES3 (particularly the email client issues - outlook 2010 (64 bit)
I like working with LD and i'm happy to pay for an upgrade/buy another licence - but not if the issue persists....
Does anyone have experience with this issue?
Thank you.

I have run all the available outlook updates (one website suggested this as a fix) and still all i am getting is:
"Either there is no default mail client or the current mail client cannot fulfil the messaging request; please run Microsoft Outlook and set it as the default mail client."
Needless to say outlook is set as the default email client and everything else is otherwise up to date/correctly installed.
We dont have a lot of funding (otherwise would ditch the email back method) - ANY fix for this method?

My Macpro has stopped my emails No problem with Ipad or Iphone but unable to send or receive or even look at history. what to do?

Question My macbook pto has stopped my emails. No problem with Ipad or Iphone but history stops two days ago and unable to access anything. Help.

OS X Mail: Troubleshooting sending and receiving email messages

Thawte Personal Email Cert - Problem with Mac Mail

Hi, I have requested a free cert from Thawte and there seems to be a problem with Mac Mail (using 2.0.7).
I am using Entourage to send a signed message from [email protected] to [email protected]
If I check mail for [email protected]
Mac Mail reports "There was a problem reading the digital signature for this message"
If I check the same account with Thunderbird, everything works fine.
Anyone else having or had problems?
-chris

Hi,
Thanks for the responses. I requested another cert and that did not help. Here is the process I used after requesting another cert.
1. Logged into www.thawte.com and requested a new cert.
2. Using Firefox, retrieved the cert.
3. In Firefox, backed up the cert to a pkcs12 file.
4. Opened Keychain and deleted the first cert.
5. Imported the pkcs12 backup file. Imported fine.
6. Open Entourage, under tools, accounts, exchange profile, security, selected the cert Thawte Freemail Member.
7. Checked all 3 options (sign, include cert, clear test signed.
8. Created a test message from Entourage to .mac account address.
9. Checked mail with Mac Mail and signature fails.
10. Check with 1.02 Thunderbird and it comes back with valid digital signature.
Next, I sent a test email to my Exchange account from Entourage and that message verifies fine. It just seems to not work when I check my email with Mac Mail.
Thanks!
-chris

Email attachment problems with "excel" files.

I have just upgraded to the iphone 4 from the 3gs and since doing so any emails I receive with excel files attached will not open the attachment? These files openened with no problem on the same email account on my 3gs.
Instead when I download the attachment and go to open it I am met with a page displaying....
"Unable to read document.
An error occured while reading the document."
Has anyone else having this problem or even better anyone know what the fix is to get these files showing up?
Any help would be appreciated,
Kris

After much frustration about excel files not opening and repeatedly not getting answers from apple, I think I might have found another way. It seems that the new apple OS does not support older versions of excel. By saving the excel file in question (Save As) to "Microsoft Excel 2007 Workbook" the Workbook opens just fine as an E-mail attachment. If you have macro's you can save as "Microsoft Excel 2007 Workbook (Macro Enabled)" and it works also.
The Workbook in question as far as I was concerned was created in Microsoft Excel 2003.
Hope this helps
Apple needs to get on the ball. This was almost a dealbreaker with me.
Android is looking better and better every day.

Email client problems. Emails stored in my saved folders are missing? What gives?

I've lost all my "saved" emails in my folders?! (Mac email client) The folders are there, the contents are gone!

I would also like to know about the company directory question.
Is it just really well hidden, or actually not present.
If not present, when will i be available?
In general, I'm also missing a feature to enable a full sync/indexing localy on the phone.
Todays phones has tonns of memory and CPU power, and for the user to have the phone look up the calling party directly is verry time saving. Also being able to quickly identify missed and/or placed calls is verry usefull.

Once signed, how can I automatically have an email client open with the document attached?

I have seen other forms simply open the email client once the user has signed the form, but I am unable to figure out how to do this :/
Thanks,
Wayne

If you set up a digital signature field, you can attach a script (e.g., doc.submitForm, doc.mailDoc) to the "Signed" event.

Exchange 2013, Outlook 2007 clients Problems with Outlook Anywhere connection

Hi everyone,
I have a mail system Exchange 2013 SP1, on Windows Server 2012 R2.
I have only one mail server with the Client Access and Mailbox roles Server.
I have a Wildcard certificate type *. Mydomain.com.
All connections to the Outlook Anywhere Outlook 2010, Outook 2013 work correctly.
The ActiveSync connections are working properly, too.
But Outlook 2007 clients connecting with Outlook Anywhere asking for credentials continuously fail continuously.
How can I solve this?
thank you very much
Microsoft Certified IT Professional Server Administrator

Hi,
Based on my experience, we need to set Outlook provider with the domain name if it's wildcard certificate:
Set-OutlookProvider -Identity EXPR -CertPrincipalName msstd:*.domain.com
http://technet.microsoft.com/en-us/library/cc535023(EXCHG.80).aspx
Thus, I recommend you try the above configuration and test the Outlook connection again.
Thanks,
Angela Shi
TechNet Community Support

OPV Client Problems with DCOM Rights

Hi,
i have done an OPC Client VI to connect to an third party OPC Server via IP.
The client will work fine if i´m logged in as an Administrator.
If using the client with an normal user accout LV will output the following
error:
Code: -2147483643
DataSocket Connect.vi
Error: Can't connect to OPC Server. Registry access denied.
I think the problem may be soved with dcom settings. But i have no
suggestion how to set there.
Thank´s for all help.
A. Franz
Enviroment:
Windows 2000 for OPC-Server and Client
LV 6.0i
Domain with NT 4.0 Server for OPC-Server and Client

[posted and mailed]
[email protected] (Andreas Franz) wrote in
<8ugfln$h87$[email protected]>:
>Hi,
>i have done an OPC Client VI to connect to an third party OPC Server via
>IP. The client will work fine if i´m logged in as an Administrator.
>If using the client with an normal user accout LV will output the
>following error:
>
>Code: -2147483643
>DataSocket Connect.vi
>Error: Can't connect to OPC Server. Registry access denied.
>
>
>I think the problem may be soved with dcom settings. But i have no
>suggestion how to set there.
>
I think the problem here might be related to the "remote registry" setup.
you might want to reread the information on setting up remote registry
access for your system. I think there is a section on this in the
Bridgeview
manuals - and possibly the Labview manuals as well.
Alex.

NFS: server reboot - client problem with "file handle" - no unmont

Hello,
when I restart a NFS-server and a client has a NFS-share on it still mounted, that NFS-share becomes unusable on the client: everything causes the client complain about an old "file handle", even trying to unmount that share!
So my question is: How to deal gracefully with a NFS-server reboot and avoiding this file handle problem?
Apart from going to each client and unmount the NFS-share by hand?
Thanks!

Do I need to Give these values manually again as they are moved from Env to other?
When we transport ID objects, the values stored in the channel get lost and have to be manually enetered......it happens even for DEV --> QA environment.
Now your channel should reflect PROD-related data.
2- Why my Receiver communiation channel coimg as
Communication Channel | PRD_400 | RFC_QA3_Receiver:
The channel name does not depend on the environment it is present....verify the name once again!
Regards,
Abhishek.

Instant Client problem with php 5.1.4 install

Hello,
I'm trying to get my php 5.1.4 compiled using the oracle 10.2.0.1 instant client.
I configure the php install with the following ..
./configure --with-apxs2=/usr/local/apache2/bin/apxs
prefix=/usr/local/apache2/php with-ldap
with-oci8=instantclient,/usr/lib/oracle/10.2.0.1/client/lib enable-sigchild
--with-config-file-path=/usr/local/apache2/conf
However during the make ( towards the end ) i get the following ....
/usr/lib/oracle/10.2.0.1/client/lib/libclntsh.so: undefined reference to `pthread_cond_signal@GLIBC_2.3.2'
/usr/lib/oracle/10.2.0.1/client/lib/libclntsh.so: undefined reference to `__ctype_b_loc@GLIBC_2.3'
/usr/lib/oracle/10.2.0.1/client/lib/libclntsh.so: undefined reference to `pthread_cond_broadcast@GLIBC_2.3.2'
/usr/lib/oracle/10.2.0.1/client/lib/libclntsh.so: undefined reference to `pthread_cond_destroy@GLIBC_2.3.2'
/usr/lib/oracle/10.2.0.1/client/lib/libclntsh.so: undefined reference to `pthread_cond_timedwait@GLIBC_2.3.2'
/usr/lib/oracle/10.2.0.1/client/lib/libclntsh.so: undefined reference to `pthread_cond_wait@GLIBC_2.3.2'
/usr/lib/oracle/10.2.0.1/client/lib/libclntsh.so: undefined reference to `pthread_cond_init@GLIBC_2.3.2'
/usr/lib/oracle/10.2.0.1/client/lib/libclntsh.so: undefined reference to `__ctype_toupper_loc@GLIBC_2.3'
/usr/lib/oracle/10.2.0.1/client/lib/libclntsh.so: undefined reference to `__ctype_tolower_loc@GLIBC_2.3'
collect2: ld returned 1 exit status
make: *** [sapi/cli/php] Error 1
Any help would be appreciated
Thanks

I've got the same problem, running on redhat 7.3, using gcc 3.43, php 5.1.4, instant client 10.2, installed via unzipping the oracle instant clients and being run on apache 1.33. I didn't 'link to pthreads' as I'm not sure what you have to do in order to do this linking. I just run php's configure, make install and let it go and it dies.
Any help would be appreciated.

BEx Broadcast email attachment problem with Lotus

In our BW system, broadcasting with email have attachment problem when we look at SOST we can see email has mhtml attachment and looks fine but end-user does not get the attachment. Email server is Lotus and we think that problem is Lotus configuration related. Anyone having same problem come to a solution, help would be appreciated.
Thanks in advance

OK.

GW8 HP1 Windows client - problems with restricted users

I've reproduced these on a few clean WinXP and Windows 2003 systems in both a GW 7.0.3 upgrade scenario and fresh install of GW 8 HP1 scenario. I am curious if anyone else has been able to reproduce these:
- Client ignores DefaultIPAddress and DefaultIPPort values for non-administrative users. If these are defined under HKEY_CURRENT_MACHINE\Software\Novell\GroupWise by the installer's setup.cfg, they are ignored when the user who is logged in is a non-administrative user. Administrative user profiles correctly pull these values but non-administrative users always try ngwnameserver. If the user profile is upgraded to an admin profile, then they start reading DefaultIPAddress and DefaultIPPort. This does not seem to be a permissions problem on the reg. keys themselves, as the values can be read by regedit when logged in as the user.
- Client does not setup MAPI profiles for the Address Book for a non-administrative user. Windows Messaging configuration dialog opens if you try to use the Address Book. If the user account is upgraded to an admin, then the next GW startup will configure the profile correctly. Downgrading the user to a non-admin at that point allows the Address Book to continue to function.
This also does not seem to be a permission problem writing to the MAPI profiles registry keys under HKCU\Software\Microsoft\Windows NT\Current Version\Windows Messaging Subsystem. I can manually import the correct keys when logged in as the restricted user and then the Address Book works without issue.
It does not look like in both cases the GW client even attempts to access the registry keys in question as per RegMon.
GW 7.0.3 client on the same equipment does not have a problem.
Any thoughts? Any other issues people have seen running GW 8 as a non-administrative user?

Originally Posted by elarsson
I've reproduced these on a few clean WinXP and Windows 2003 systems in both a GW 7.0.3 upgrade scenario and fresh install of GW 8 HP1 scenario. I am curious if anyone else has been able to reproduce these:
- Client ignores DefaultIPAddress and DefaultIPPort values for non-administrative users. If these are defined under HKEY_CURRENT_MACHINE\Software\Novell\GroupWise by the installer's setup.cfg, they are ignored when the user who is logged in is a non-administrative user. Administrative user profiles correctly pull these values but non-administrative users always try ngwnameserver. If the user profile is upgraded to an admin profile, then they start reading DefaultIPAddress and DefaultIPPort. This does not seem to be a permissions problem on the reg. keys themselves, as the values can be read by regedit when logged in as the user.
- Client does not setup MAPI profiles for the Address Book for a non-administrative user. Windows Messaging configuration dialog opens if you try to use the Address Book. If the user account is upgraded to an admin, then the next GW startup will configure the profile correctly. Downgrading the user to a non-admin at that point allows the Address Book to continue to function.
This also does not seem to be a permission problem writing to the MAPI profiles registry keys under HKCU\Software\Microsoft\Windows NT\Current Version\Windows Messaging Subsystem. I can manually import the correct keys when logged in as the restricted user and then the Address Book works without issue.
It does not look like in both cases the GW client even attempts to access the registry keys in question as per RegMon.
GW 7.0.3 client on the same equipment does not have a problem.
Any thoughts? Any other issues people have seen running GW 8 as a non-administrative user?
I've reproduced this now with the FCS GW 8 client as well.
Also a point of clarification on the MAPI profiles -- in an upgrade scenario from GW 7 client, if the user profile previosuly existed on the machine and had the MAPI settings configured by the GW 7 client, then they will work fine with GW 8. The issue seems to only occur with new user profiles, logging into a machine as a non-administrative user. The GW 8 client does not create the proper registry keys for the MAPI profile under HKEY_CURRENT_USER and the Address Book does not function.

Email client problem with 11.0.3

Similar Messages

Maybe you are looking for