Email Client Problem with HP Scan to Email Automator

Whenever I use the screen features on my HP Photosmart D110a printer and select scan to pc and then email PDF it opens HP scan just fine using the Email PDF Automator and the document scans perfectly but instead of being sent to Outlook 2011 it gets sent to Apple Mail.  I can't for the life of me find out how to change the automated destination.  Outlook is set as the default browser but it always goes to Apple Mail.  Can't seem to change it through HP Utility.  Any help would be much appreciated.

It is the responsibility of the printer manufacturer to update their drivers, not Apple.
Can you print?
Have you checked the manufacture's web site for an updated driver?

Similar Messages

  • C7250 All In One When scanning; when scan job completed, there is a problem with HP Scanning

    Using Windows Vista Home Premium edition.  Using HP C7250 All in One.
    When scaning a document when the scan job is completed, a window pops up that there is a problem with HP Scanning and need to close the program.  It occurs on every scan.
    When you click the close program button, the HP program indicates completing scan, one page after the other!
    Not sure what is going on, I have used the HP scan/print doctor, says everything is OK.  
    I have checked for HP updates and there are none!  The only thing I have not done is to run the installation disk!
    Anyone have any ideas as to the problem and a resolve to fix the problem?  other than buying a new unit!!
    Thanks for your help

    Hi flamechaser,
    Welcome to the HP Forums.
    I see that you are having some issue's when attempting to scan to the computer.
    I do have a few suggestions we can try in the attempt to troubleshoot this issue.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I have also located a document that deals with communication issues between the computer and printer. Please click on the following link for a Windows Error: 'No HP devices have been detected. HP Solution Center will now close.'
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Problems with large scanned images

    I have been giving Aperture another try since 1.1 came out, and I am still having problems with large tiff files derived from scanned 4x5 negatives. The files are 500mb or more, 16 bit RGB, with ProPhoto RGB or Ektaspace PS5 profiles, directly out of the scanner.
    Aperture imports the files correctly, and shows their thumbnails. When I select a thumbnail "Loading" is displayed briefly, and the the dreaded "Unsupported Image Format" is displayed. Sometimes "Loading" goes on for a while, and a geometric pattern (looking like a rendering of random memory) is displayed. Restarting Aperture doesn't help.
    Lower resolution (250mb, 16bit) files are handled properly. The scans are from an Epson 4870 scanner. I have tried pulling the scans into Photoshop and resaving with various tiff options, and as PSD with no improvement. I have the same problem with corrected/modified psd files coming out of Photoshop CS2.
    I am running on a Power Mac G5 dual 2ghz with 8gb of RAM and an NVIDIA GeForce 6800 GT DDL (250mb) video card, with all the latest OS and software updates.
    Has anyone else had similar problems? More importantly, is anyone else able to work with 500mb files of any kind? Is it my system, or is it the software? I sent feedback to Apple as well.
    dual g5 2ghz   Mac OS X (10.4.6)  

    I have a few (well actually about 100) scans on my system of >500Mb. I tried loading a few and am getting an inconsistent pattern of errors that correlates with what you are reporting.
    I imported 4 files and three were troubled, the fouth was OK. I imported another four files and the first one was OK and the three others had your reported error, also the previously good file from the first import was now showing the same 'unsupported' image' message.
    I would venture to say that if you shoot primarily 4x5 and work with scans of this size that Aperture is not the program for you--right now. I shoot 35mm and have a few images that I have scanned at 8000dpi on my Imacon 848 but most of my files are in the more reasonable 250Mb range (35mm @ 5000dpi).
    I will probably downsample my 8000dpi scans to 5000dpi and not worry to much about it. In a world where people believe that 16 megapixels is hi-res you are obviously on the extreme side.(Good for you!) You should definately file a bug report but I wouldn't expect much help anytime soon for your super-sized scans.

  • Exchange 2013, Outlook 2007 clients Problems with Outlook Anywhere connection

    Hi everyone,
    I have a mail system Exchange 2013 SP1, on Windows Server 2012 R2.
    I have only one mail server with the Client Access and Mailbox roles Server. 
    I have a Wildcard certificate type *. Mydomain.com. 
    All connections to the Outlook Anywhere Outlook 2010, Outook 2013 work correctly. 
    The ActiveSync connections are working properly, too. 
    But Outlook 2007 clients connecting with Outlook Anywhere asking for credentials continuously fail continuously. 
    How can I solve this? 
    thank you very much
    Microsoft Certified IT Professional Server Administrator

    Hi,
    Based on my experience, we need to set Outlook provider with the domain name if it's wildcard certificate:
    Set-OutlookProvider -Identity EXPR -CertPrincipalName msstd:*.domain.com
    http://technet.microsoft.com/en-us/library/cc535023(EXCHG.80).aspx
    Thus, I recommend you try the above configuration and test the Outlook connection again.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Email client problem with 11.0.3

    I recently upgraded to Reader 11.0.3 and evertime I lauch the application I get an error message along the lines: "This application has failed to start because GAPI32.dll was not found.  Re-intalling the application may fix this problem", followed by "Either there is no default email client or the current mail client cannot fulfil the messaging request.  Please run Microsoft Outlook and set it as the default mail client."
    I am running Windows XP SP3 with Outlook 2000 as the default mail client and have gone through the MS fix for missing GAPI32.  The point is, I DO NOT want Reader to email anything for me at any time.  I prefer to go into Outlook, prepare an email and attach a PDF.   Reader works okay but I am getting pretty cheesed off with having to OK the two error boxes everytime I open a PDF.
    Can I just remove the email facility from Reader?   In Edit|Preferences Email Accounts, I get "Default Mail Application (Microsoft Outlook)" but the delete button is greyed out.

    Timcarson1 in general the error message you received is accurate.  Have you tried applying the update under a local administrator account to see if you face the same difficulty?  If not then please work with your computer department to allow this test to occur.

  • OPV Client Problems with DCOM Rights

    Hi,
    i have done an OPC Client VI to connect to an third party OPC Server via IP.
    The client will work fine if i´m logged in as an Administrator.
    If using the client with an normal user accout LV will output the following
    error:
    Code: -2147483643
    DataSocket Connect.vi
    Error: Can't connect to OPC Server. Registry access denied.
    I think the problem may be soved with dcom settings. But i have no
    suggestion how to set there.
    Thank´s for all help.
    A. Franz
    Enviroment:
    Windows 2000 for OPC-Server and Client
    LV 6.0i
    Domain with NT 4.0 Server for OPC-Server and Client

    [posted and mailed]
    [email protected] (Andreas Franz) wrote in
    <8ugfln$h87$[email protected]>:
    >Hi,
    >i have done an OPC Client VI to connect to an third party OPC Server via
    >IP. The client will work fine if i´m logged in as an Administrator.
    >If using the client with an normal user accout LV will output the
    >following error:
    >
    >Code: -2147483643
    >DataSocket Connect.vi
    >Error: Can't connect to OPC Server. Registry access denied.
    >
    >
    >I think the problem may be soved with dcom settings. But i have no
    >suggestion how to set there.
    >
    I think the problem here might be related to the "remote registry" setup.
    you might want to reread the information on setting up remote registry
    access for your system. I think there is a section on this in the
    Bridgeview
    manuals - and possibly the Labview manuals as well.
    Alex.

  • NFS: server reboot - client problem with "file handle" - no unmont

    Hello,
    when I restart a NFS-server and a client has a NFS-share on it still mounted, that NFS-share becomes unusable on the client: everything causes the client complain about an old "file handle", even trying to unmount that share!
    So my question is: How to deal gracefully with a NFS-server reboot and avoiding this file handle problem?
    Apart from going to each client and unmount the NFS-share by hand?
    Thanks!

    Do I need to Give these values manually again as they are moved from Env to other?
    When we transport ID objects, the values stored in the channel get lost and have to be manually enetered......it happens even for DEV --> QA environment.
    Now your channel should reflect PROD-related data.
    2- Why my Receiver communiation channel coimg as
    Communication Channel | PRD_400 | RFC_QA3_Receiver:
    The channel name does not depend on the environment it is present....verify the name once again!
    Regards,
    Abhishek.

  • Instant Client problem with php 5.1.4 install

    Hello,
    I'm trying to get my php 5.1.4 compiled using the oracle 10.2.0.1 instant client.
    I configure the php install with the following ..
    ./configure --with-apxs2=/usr/local/apache2/bin/apxs
    prefix=/usr/local/apache2/php with-ldap
    with-oci8=instantclient,/usr/lib/oracle/10.2.0.1/client/lib enable-sigchild
    --with-config-file-path=/usr/local/apache2/conf
    However during the make ( towards the end ) i get the following ....
    /usr/lib/oracle/10.2.0.1/client/lib/libclntsh.so: undefined reference to `pthread_cond_signal@GLIBC_2.3.2'
    /usr/lib/oracle/10.2.0.1/client/lib/libclntsh.so: undefined reference to `__ctype_b_loc@GLIBC_2.3'
    /usr/lib/oracle/10.2.0.1/client/lib/libclntsh.so: undefined reference to `pthread_cond_broadcast@GLIBC_2.3.2'
    /usr/lib/oracle/10.2.0.1/client/lib/libclntsh.so: undefined reference to `pthread_cond_destroy@GLIBC_2.3.2'
    /usr/lib/oracle/10.2.0.1/client/lib/libclntsh.so: undefined reference to `pthread_cond_timedwait@GLIBC_2.3.2'
    /usr/lib/oracle/10.2.0.1/client/lib/libclntsh.so: undefined reference to `pthread_cond_wait@GLIBC_2.3.2'
    /usr/lib/oracle/10.2.0.1/client/lib/libclntsh.so: undefined reference to `pthread_cond_init@GLIBC_2.3.2'
    /usr/lib/oracle/10.2.0.1/client/lib/libclntsh.so: undefined reference to `__ctype_toupper_loc@GLIBC_2.3'
    /usr/lib/oracle/10.2.0.1/client/lib/libclntsh.so: undefined reference to `__ctype_tolower_loc@GLIBC_2.3'
    collect2: ld returned 1 exit status
    make: *** [sapi/cli/php] Error 1
    Any help would be appreciated
    Thanks

    I've got the same problem, running on redhat 7.3, using gcc 3.43, php 5.1.4, instant client 10.2, installed via unzipping the oracle instant clients and being run on apache 1.33. I didn't 'link to pthreads' as I'm not sure what you have to do in order to do this linking. I just run php's configure, make install and let it go and it dies.
    Any help would be appreciated.

  • Problem with 2nd scan in Acrobat Std 8

    I submitted this problem a few days ago, but it seems to have disappeared from the forum.
    I am Using Acrobat Std 8.1.4 with a Canon MP530 all-in-one printer (in Twain mode).  Since approximately a month ago, the following problem started with no apparent reason (no chg in hardware, no obvious chg in software except for Adobe & Microsoft updates):
    I do "Create Pdf" | "From Scanner" and it works fine the first time.  If I try to scan again within the same session (to a new pdf or to an existing pdf), I get the following error message:
    Error while interfacing with the scanner; the selected scanner was not found.
    I re-installed the printer drivers a couple of days ago (but I am not sure this did anything to the Twain drivers).
    I would appreciate any suggestions.
    Thanks,
    Gabriel

    Any insightful suggestions from Acrobat or Twain gurus?
    Any suggestions on how to diagnose the problem?
    Thanks,
    Gabriel

  • LaserJet 2600n Print Quality problem (with a scan showing the problem)

    I'm trying to create areas of solid colour in order to use the toner transfer method of making printed circuits.  To do that I need to print really dark solid black blocks - when I try that I see uneven toner in certain areas.  This scan of the output shows the problem:
    There are lighter areas (less covered by toner) at the bottom (page orientation wise) of solid black blocks - but only where there is a subsequent block of black below!  For example, the leftmost shape's bottom edge is fine. 
    I'm perplexed.  I'm very impressed with the configurability of the 2600n, and I get the feeling that there's probably a setting I could tweak to solve this, and I'm hoping that there's a laser printer expert reading this forum who'll have some suggestions.
    Cheers,
    Chris.

    It looks to me as if you have your print quality setting in your printer driver set to standard or draft rather than set to best photo. This setting has to be changed in your printer driver which is accessed by the button in the lower left-hand corner of the screen when you are in the print module.

  • GW8 HP1 Windows client - problems with restricted users

    I've reproduced these on a few clean WinXP and Windows 2003 systems in both a GW 7.0.3 upgrade scenario and fresh install of GW 8 HP1 scenario. I am curious if anyone else has been able to reproduce these:
    - Client ignores DefaultIPAddress and DefaultIPPort values for non-administrative users. If these are defined under HKEY_CURRENT_MACHINE\Software\Novell\GroupWise by the installer's setup.cfg, they are ignored when the user who is logged in is a non-administrative user. Administrative user profiles correctly pull these values but non-administrative users always try ngwnameserver. If the user profile is upgraded to an admin profile, then they start reading DefaultIPAddress and DefaultIPPort. This does not seem to be a permissions problem on the reg. keys themselves, as the values can be read by regedit when logged in as the user.
    - Client does not setup MAPI profiles for the Address Book for a non-administrative user. Windows Messaging configuration dialog opens if you try to use the Address Book. If the user account is upgraded to an admin, then the next GW startup will configure the profile correctly. Downgrading the user to a non-admin at that point allows the Address Book to continue to function.
    This also does not seem to be a permission problem writing to the MAPI profiles registry keys under HKCU\Software\Microsoft\Windows NT\Current Version\Windows Messaging Subsystem. I can manually import the correct keys when logged in as the restricted user and then the Address Book works without issue.
    It does not look like in both cases the GW client even attempts to access the registry keys in question as per RegMon.
    GW 7.0.3 client on the same equipment does not have a problem.
    Any thoughts? Any other issues people have seen running GW 8 as a non-administrative user?

    Originally Posted by elarsson
    I've reproduced these on a few clean WinXP and Windows 2003 systems in both a GW 7.0.3 upgrade scenario and fresh install of GW 8 HP1 scenario. I am curious if anyone else has been able to reproduce these:
    - Client ignores DefaultIPAddress and DefaultIPPort values for non-administrative users. If these are defined under HKEY_CURRENT_MACHINE\Software\Novell\GroupWise by the installer's setup.cfg, they are ignored when the user who is logged in is a non-administrative user. Administrative user profiles correctly pull these values but non-administrative users always try ngwnameserver. If the user profile is upgraded to an admin profile, then they start reading DefaultIPAddress and DefaultIPPort. This does not seem to be a permissions problem on the reg. keys themselves, as the values can be read by regedit when logged in as the user.
    - Client does not setup MAPI profiles for the Address Book for a non-administrative user. Windows Messaging configuration dialog opens if you try to use the Address Book. If the user account is upgraded to an admin, then the next GW startup will configure the profile correctly. Downgrading the user to a non-admin at that point allows the Address Book to continue to function.
    This also does not seem to be a permission problem writing to the MAPI profiles registry keys under HKCU\Software\Microsoft\Windows NT\Current Version\Windows Messaging Subsystem. I can manually import the correct keys when logged in as the restricted user and then the Address Book works without issue.
    It does not look like in both cases the GW client even attempts to access the registry keys in question as per RegMon.
    GW 7.0.3 client on the same equipment does not have a problem.
    Any thoughts? Any other issues people have seen running GW 8 as a non-administrative user?
    I've reproduced this now with the FCS GW 8 client as well.
    Also a point of clarification on the MAPI profiles -- in an upgrade scenario from GW 7 client, if the user profile previosuly existed on the machine and had the MAPI settings configured by the GW 7 client, then they will work fine with GW 8. The issue seems to only occur with new user profiles, logging into a machine as a non-administrative user. The GW 8 client does not create the proper registry keys for the MAPI profile under HKEY_CURRENT_USER and the Address Book does not function.

  • 10.4.6 Client problems with 10.3.9 Server

    First Post read lots never posted!
    I have a 10.3.9 Server with one room of 10.3.9 clients all happy all running just fine. I get new shiny machines upgrade to 10.4.6 and have to go through the rigmarole of installing and matching software etc. When I have entered all the ethernet ID's into WG manager I log out of the local user and there was the log in window, big cheers, happy days! Then we pushed the first group of users through as a test logged in fine, logout fine, login again greyed password nothing moving. Any ideas? My weekend is looking pretty dull at the moment

    Further to this problem.
    I have down graded a machine to 10.4.3 and the same problem occurs. If I restart the machine the local user account is the only one that appears. I login through that and logout again the full list of netework users reappears. I can the n login as a network user, all files and folders are there all permissions seem to be respected and the user can wwork fine.
    If you then logout and login to the local user and logout again network users are able to login again for perhaps 2 subsequent logins and then the machine hangs.
    I had a look at my AFP error log which is normally empty and soome MMAP error entry, sorry I'm at home and doing this from memory.
    I supose the ultimate answer is upgrade my server to 10.4.x but this being Botswana that could take a while. I could downgrade the Mini's to 10.3.9 but they don't seem to like that much either.
    This is all a bit wierd as I tested this with a sample machine at 10.4.5 and .6 before upgrading the room.
    Phoning Apple is not really an option here in Botswana so please feel free to wade in.
    Also found the same problem at this URL http://lists.apple.com/archives/client-management/2006/Apr/msg00122.html

  • Servlet streaming video to client, problem with Movie not loaded.

    Ok, I am sorry if this question is beyond the scope of Servlets/Java or J2EE but I figured it was worth a shot:
    I have two servlets, one is a very simple class consisting of a doGet which just calls doPost and the doPost which just plucks out a single parameter from the request and prints out some HTML. Here is the code:
         public void doPost(HttpServletRequest request, HttpServletResponse response)
                   throws ServletException, IOException {
              String videoDir = request.getParameter("directoryofvideo");
              response.setContentType("text/html");
              PrintWriter out = response.getWriter();
              if (videoDir==null||videoDir.equals("")||!new File(videoDir).exists()) {
                   out.println("<script type=\"text/javascript\">alert(\"There was an error locating the selected videos\");</script>");
                   //return;
              out.println("<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01 Transitional//EN\">");
              out.println("<HTML>");
              out.println("  <HEAD><TITLE>A Servlet</TITLE></HEAD>");
              out.println("  <BODY>");*/
              out.println("   <object id=\"player1\" width=\"480\" height=\"360\" data=\"/MyApp/serveUploadedFile?url=//ns20/data3/Video/player_flv_maxi.swf\" type=\"application/x-shockwave-flash\">");
              out.println("    <param value=\"/MyApp/serveUploadedFile?url=//ns20/data3/Video/player_flv_maxi.swf\" name=\"movie\"/>");
              out.println("    <param value=\"true\" name=\"allowFullScreen\"/>");
              out.println("    <param value=\"configxml=/MyApp/serveUploadedFile?url=//ns20/data3/Video/1.xml\" name=\"FlashVars\"/>");
              out.println("   </object>");
              out.println("  </BODY>");
              out.println("</HTML>");
              out.flush();
              out.close();
         }In case that is hard to read, the HTML printed is this:
       <object id="player1" width="480" height="360" data="/MyApp/serveUploadedFile?url=//ns20/data3/Video/player_flv_maxi.swf" type="application/x-shockwave-flash">
        <param value="/MyApp/serveUploadedFile?url=//ns20/data3/Video/player_flv_maxi.swf" name="movie"/>
        <param value="true" name="allowFullScreen"/>
        <param value="configxml=/MyApp/serveUploadedFile?url=//ns20/data3/Video/1.xml" name="FlashVars"/>
       </object>The second servlet, appropriately named: serveUploadedFile, reads in from the file off the file system and streams the data back to the client and I know it works because I can hit /MyApp/serveUploadedFile?url=//ns20/data3/Video/player_flv_maxi.swf and get the swf player but if you'd like to see the code I can copy and paste that in here as well.
    The problem is by page loads blank, all the html is written but in firebug the only thing actually downloaded to the client is the first swf player, and if I right click in the window it says "Movie Not Loaded" on Firefox, IE and Safari. I have a working example of a video that is hosted on our NAS with the exact same HTML (which is where I got that from) except the swf and xml files appear as just their names because they are in the same directory as the index.html.
    Any ideas?
    Thank you so much in advance.

    Also, I realize the parameter is not being used here that is because in order to eliminate possibilities of the problem I hard coded the path into the println statements and I am sure the path and all the files exist as well ;)

  • 10.4 client problem with OSX Server 10.5.8

    I have an late 2009 X_server with OSX 10.5.8 running, have binding to AD and enabled system as OD master. I have added an ad user to an od group and set a prefernce in the DOC to add the Group folder to the doc.
    On my MBP mostly all goes well except for a question mark for ther group folder. But on an old G4 tower I'm testing with it just prompts me about not being assigned to a group and gives the option to apply settings. but the settinsg never take place. Has any had this problem before? Thanks in advance. Art

    I've got the Audiotron working again. I found some info on basically opening the entire share to guest access. Reference this thread: http://discussions.apple.com/thread.jspa?threadID=392697
    I tried changing "encrypt passwords" (global section) to "no" and that didn't help. Then I added this to the music share and everything works. Probably not the best security solution, but I'm behind a firewall.
    In /etc/smb.conf added for the music share:
    public = yes
    only guest = no
    writable = no
    printable = no
    (I still left "encrypt passwords = no" in the global section. I'm not sure if that made a difference or not.)

  • Problem with importing scanned photos into iPhoto

    I have an Epson scanner that scans photos into the JPEG format. However, when I try to import these photos into iPhoto I am told that the file format is incompatible with iPhoto. This is odd since photos in iPhoto ARE in JPEG format.
    Can anybody help?
    Many thanks in advance for any assistance.
    Sir Leicester

    Did you scan these photos as grayscale b/w photos? If so that's the reason. iPhoto does not support the grayscale mode when it has the *+Dot Gain 20%+* profile added to it and that's what scanners use.
    Rescan all b/w images as color and they will be accepted by iPhoto. Or you can download the Automator workflow application, Convert to JPG and Embed sRGB profile, from Toad's Cellar and drop the files onto the application. This will batch convert them to jpegs in the RGB mode with the sRGB IEC61966-2.1 color profile.
    OT

Maybe you are looking for