Email Delivery problem from Mailman to Exchange 2010 SP3 - Invalid Character Set Name in Message Subject
Dear all,
we have a problem in the email delivery from Mailman 2.6 List Server to Exchange 2010 SP3 CU7,
related to the encoding name of the Message Subject.
The error we receive is the following:
#550 5.6.0 CAT.InvalidContent.Exception: InvalidCharsetException, Character set name (iso8859-7) is invalid or not installed.;
cannot handle content of message with InternalId
First of all, we can notice that given an encoding name as 'iso-8859-X', it is transformed by the Mailman to 'iso8859-X' (without the first dash).
Our previous Exchange version ( Exchange 2003) didn't have any problem with this, but now,
Microsoft Exchange 2010 doesn't like the form of the encoding name without the dash,
and bounces the emails from Mailman.
The strange is that other email systems like Gmail, Yahoo accept the transformed encoding name.
Any help would be appreciated.
Kind Regards
Panagiotis Kontogiannis
Hi Panagiotis,
Base on my search, I found a similar issue which was caused by the antivirus software in exchange server.
I recommend you try to disable all the antivirus services and check if any helps.
The similar thread for you reference:
https://social.technet.microsoft.com/Forums/en-US/5bcf3098-2fe7-442f-a0bd-b720d703c6d0/problem-with-microsoft-exchange-2010-on-sbs-2011-550-560-catinvalidcontentexception?forum=exchangesvrdevelopment
Best regards,
Niko Cheng
TechNet Community Support
Similar Messages
-
Emails disappear automatically from outlook 2007 exchange 2010
Hello All,
I have an urgent issue with my CEO , my environment contain exchange 2010 mailbox/HUB/CAS, CEO have an outlook 2007 and he face an issue with his emails, he received emails and before he open it disappear after few time, when i open the recovery deleted items
i found the emails and they didn't appear in deleted item folder only on recovery deleted items, so any suggestions please.
notes :
No rules in outlook
No Auto archive
his computer have a FEP as antivirus.Hi,
Can you see the missing emails from OWA?
Have you tried to start Outlook in safe mode to check if any third-party add-ins caused this problem? To do this, press Windows key + R, type
outlook.exe /safe in the Run dialog box and press Enter.
If the issue would be gone in safe mode, please disable suspicious add-ins referring to the following article:
http://office.microsoft.com/en-in/help/enable-or-disable-add-ins-in-office-programs-HA010034127.aspx
Please also check if your virus scanner is integrated with your Outlook. If so, disable it to check the result.
If possible, we can try to create a new mail profile in control panel to check if the issue persists:
http://support.microsoft.com/kb/829918/en-us
Hope this helps.
Best Regards,
Steve Fan
TechNet Community Support -
Hi
My exchange environment consist with "Server Exchange 2010 SP3" and "Edge Server with Exchange 2010 SP3".
On Edge server in SMTP receive log i get every now and then an entry: xxxxxx 500 5.3.3 Unrecognized command.
It is serius problem because I got few e-mails from senders that they had problem with sending e-mail messages to our e-mail domain. They receive e-mail report, for example
Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the server for the recipient domain domena.plby
mail.domena.pl.
[95.xxx.xxx.xx].
The error that the other server returned was:
500 5.3.3 Unrecognized command
Could you help me to solve this problem? What could cause this problem?
Thank you in advance
Tomasz
Kind Regards TomaszI have the same issue, but there is plenty of hard disk storage on the Exchange Server. This seems to only be happening from Google Business account/ Postini. If I send message from my personal Gmail account it works fine, but an agency who is on Google
business seems to have issues sending to us and they are delayed, sometimes they get through and other times they just don't.
Results from Mail Acceptance Test:
I enter my internal address and the remote users postini account as the test setup I received two emails from the tool but the end results of the test are:
Error submitting mail
Mail submission failed: Error message: Syntax error, command unrecognized. The server response was: 5.3.3 Unrecognized command.
Google support stated this:
Here are the logs from Postini trying to connect to mydomain.com (IP x.x.x.x) :
1. 2014/08/09 03:26:28 IP:209.85.218.50 SMTP-STLS:OK <null> TLSv1:RC4-SHA Validate:None 2. 2014/08/09 03:26:28 IP:209.85.218.50 SMTP LOG: Sender => FFD:MAIL FROM:<[email protected]>
3. 2014/08/09 03:26:28 IP:209.85.218.50 Fdal:Customer has null root_iid outbound default at org 100000001 4, 2014/08/09 03:26:28 IP:209.85.218.50 SMTP LOG: Sender <= FFD:250 Ok 5. 2014/08/09 03:26:28 IP:209.85.218.50 SMTP LOG: Sender => FFD:RCPT TO:[email protected]>
6. 2014/08/09 03:26:34 IP:209.85.218.50 To:[email protected] SMTP LOG: FFD => mydomain.com (x.x.x.x):Connection established 7. 2014/08/09 03:26:34 IP:209.85.218.50 To:[email protected] SMTP LOG: FFD <= mydomain.com (x.x.x.x):220 server.mydomain.com
ESMTP Service ready 8. 2014/08/09 03:26:34 IP:209.85.218.50 To:[email protected] SMTP LOG: Sender <= FFD:250 Ok 9. 2014/08/09 03:26:35 IP:209.85.218.50 To:[email protected] SMTP LOG: Sender => FFD:968 last bytes of data with dot 10. 2014/08/09 03:28:05
IP:209.85.218.50 To:[email protected] From:[email protected]:1119780 FP:2603ec6d38c69886eb1000e516fb745a0384e50b SMTP:Delivery still in progress after 90 seconds, recording FP 11. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected] SMTP
LOG: FFD => mydomain.com (x.x.x.x):failed to send the last period(.) 12. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected] oremote:Skipping Archive for Sender because did not deliver message 13. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected]
SMTP:451 Remote connection lost - psmtp 14. 2014/08/09 03:31:17 IP:209.85.218.50 To:[email protected] SMTP LOG: Sender <= FFD:451 Remote connection lost - psmtp
As you can see, on line 9, at 03:26:35, we declared to the receiving server what we were about to send. At the line number 10, almost two minutes passed without an authorization (250 OK) from the receiving server. You can see our status being pushed back
at that moment to the receiving mail server: SMTP:Delivery still in progress after 90 seconds. Two more minutes later the connection was simply dropped and so we generated a 400 error message to encourage the sending server to try again later (since no bounce
was given per say from the receiving server, we won't hard-bounce it but defer it).
I hope this will help. you can try to look in the mydomain.com inbound logs and see at that exact time what happened? Unfortunately, our visibility pretty much ends there as we don't have full visibility of your mail environment. You'll need to investigate
within your own environment unfortunately. If you have any more information to share with me, in case it might help me help you, feel free to do so. I'll leave this case opened for now.
Sincerely,
Patricia
Google Enterprise Support -
Hi,
When an HTML email with attachment is received on iPhone/iPad (iOS 8.2),
it can be downloaded in three cases of
intermittents ways :
- The full message is downloaded in HTML format
- The message is download in text format and a
"Download full message" link is displayed
at the bottom of the message
- The message is displayed in text format,
but continues to download the rest of the message.
When the download is complete, the message is displayed
in HTML format.
This behavior is intermittent. The Apple's support
says it is a particular configuration on Exchange server
that causes this behavior.
I want to know if there is a way to fix
this problem and force download email
either in text or HTML format ?
This problem occurs on iPhones/iPad
(iOS8.2) with ActiveSync account (Exchange 2010
SP3). It occurs also with Outlook.com account.
On the Exchange 2010 SP3 server, The MaxEmailBodyTruncationSize
and MaxEmailHTMLBodyTruncationSize settings are
unlimited in ActiveSync policies.
Thank you for your help.Hi,
We can configure Exchange ActiveSync Mailbox Policy Properties to force device download HTML or text format email.
Use the EMC to view or configure Exchange ActiveSync Mailbox Policy by the following steps:
In the console tree, navigate to Organization Configuration >
Client Access.
In the result pane, click the Exchange ActiveSync Mailbox Policies tab, and then select the policy you want to view or configure.
In the action pane, click Properties.
Under the Sync Settings tab, check or uncheck the box
Allow HTML-formatted e-mail. Select this check box to enable e-mail messages that are formatted in HTML to be synchronized to the mobile phone. If this check box isn't selected, all e-mail messages will be converted to plain text before synchronization.
And use this command to configure whether allow text messaging on the mobile phone. The Exchange Enterprise Client Access License is required to change the values of this setting.
Set-ActiveSyncMailboxPolicy -Identity PolicyName –AllowTextMessaging $True
For more information, please refer to this document.
https://technet.microsoft.com/en-us/library/bb123484(v=exchg.141).aspx
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support -
Exchange 2010 SP3 - Delayed emails with XLSM attachments...
Running Exchange 2010 SP3 Rollup 5. Clients running Windows 7 and Office 2010 Pro Plus SP2. Have one specific user / client that when sending emails with an XLSM attachment around 5:30AM, the email is delayed getting to the Exchange server and
is delayed up to 16 hours. Unfortunately, this is a random occurrence, and not necessarily easy to duplicate.
The Sent Items on the Outlook client reflect the correct sent time, but the Message Tracking Log on the Exchange server shows the server did not receive the email until approximately 12 to 16 hours later.
The desktop is a shared system and this issue appears to be isolated to the user's profile, AD account, or Exchange. I've literally blown away the users local profile and reconfigured it with no resolution.
Any suggestions are greatly appreciated.
FuelHi,
Please verify whether there is any error/warning/information message left in App log. If yes, please paste the details without sensitive information.
I suggest re-send a .xlsm attachment for testing to verify whether it delays.
Thanks
Mavis
Mavis Huang
TechNet Community Support -
Recall message from OWA in Exchange 2010
Dear All,
Is it possible to Recall message from OWA in Exchange 2010?? we have ex2010 sp2.
if possible please provide steps
Sunil
SUNIL PATEL SYSTEM ADMINISTRATORFirst, Exchange 2010 SP2 is no longer supported. Please update to SP3 at your earliest convenience.
https://social.technet.microsoft.com/Forums/en-US/b3085dd9-6777-454e-af30-279dfccffb8b/exchange-2010-sp1-and-sp2-are-no-longer-supported?forum=exchange2010
Second, message recall has never been available in OWA. This is an Outlook feature, not an Exchange feature.
http://support.microsoft.com/kb/197094 -
Exchange 2010 SP3 installation Problem
Im getting below error when upgrading with Exchange 2010 Sp3. Please assist.
Couldn't remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1. Fatal error during installation. Error code is 1603.
Below the complete error from Exchange Setup Logs
[02/16/2014 04:55:04.0515] [0] Setup will run the task 'uninstall-msipackage'
[02/16/2014 04:55:04.0515] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU''
[02/16/2014 04:55:04.0515] [1] Active Directory session settings for 'Uninstall-MsiPackage' are: View Entire Forest: 'True', Configuration Domain Controller: 'domain.local', Preferred Global Catalog: 'Domain.local', Preferred Domain Controllers: '{ domain.local
[02/16/2014 04:55:04.0515] [1] Beginning processing uninstall-msipackage -LogFile:'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode:'4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues:'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU'
[02/16/2014 04:55:04.0547] [1] Removing MSI package with code '4934d1ea-be46-48b1-8847-f1af20e892c1'.
[02/16/2014 04:55:06.0187] [1] [ERROR] Unexpected Error
[02/16/2014 04:55:06.0187] [1] [ERROR] Couldn't remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1. Fatal error during installation. Error code is 1603.
[02/16/2014 04:55:06.0187] [1] [ERROR] Fatal error during installation
[02/16/2014 04:55:06.0234] [1] Ending processing uninstall-msipackage
[02/16/2014 05:03:04.0333] [0] End of Setup
[02/16/2014 05:03:04.0333] [0] **********************************************Hi,
As you have found, the error is caused by that .msp installer files correlating to all the Update Rollups are not present in the c:\windows\installer folder.
Based on my research, there is no Microsoft article about the hotfix of KB2492690 (SP1 Update Rollup 3). Because our Exchange Team pulled the download due to issues with integration with Blackberry.
For more information, you can refer to the following article:
http://blogs.technet.com/b/exchange/archive/2011/03/14/exchange-2010-sp1-rollup-3-and-blackberrys-sending-duplicate-messages.aspx
Thus, to get more professional and faster help, I recommend you contact with our following support:
https://support.microsoft.com/common/international.aspx?RDPATH=%2foas%2fdefault.aspx%3fgprid%3d730
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support -
Problems with OWA after installing Exchange 2010 SP3
Hi,
I just installed Exchange 2010 SP3 on a SBS 2011 machine. The installation completed successfully, but after the installation OWA isn't working anymore. When I browse to OWA I get the following message:
I did a reset for the OWA vritual directory, but nothing helps..
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Microsoft.Exchange.Clients.Owa.Core.Logon..ctor() +28
ASP.auth_logon_aspx..ctor() +17
__ASP.FastObjectFactory_app_web_9ficbu1h.Create_ASP_auth_logon_aspx() +30
System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +137
System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext context, String requestType, VirtualPath virtualPath, String physicalPath) +49
System.Web.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +424
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +262Hi Alelieveld,
When you reset a virtual directory, the virtual directory is removed and a new virtual directory with default settings is created.
After you reset the VD, did you restart IIS?
For more information, please see:
Reset Client Access Virtual Directories
http://technet.microsoft.com/en-us/library/ff629372(v=exchg.141).aspx
Frank Wang
TechNet Community Support -
Sharepoint 2013 vs Exchange 2010 SP3 search (Error while crawling LOB contents)
Hi there:
We are trying to solve the problem: ERROR CRAWLING LOB CONTENTS when we wish to search Exchange 2010 SP3 public folder content on Sharepoint 2013 Foundation.
Quick briefing:
Followed this instructions:
http://technet.microsoft.com/en-us/library/jj591608(v=office.15).aspx
* Created CRAWL RULE
- Used Domain Admin for content access ---> IS THIS WRONG?
- Domain Admin can access public folder thru Outlook Web Access (checked)
- Included all items in this path
PRINTSCREEN 1
* Added a content source for Exchange Server public folders
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 1st subfolder in new window and copied the address
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 2nd subfolder in new window and copied the address
PRINTSCREEN2
* Did a FULL CRAWL
PROBLEM:
- Search results does not throw "correct data". Some items are not being found
CRAWL LOG is reporting: Error while crawling LOB contents
Detailed error message:
https://mail.domain.com/OWA/?ae=Folder&id=PSF.LgAAAAAaRHOQqmYRzZvIAKoAL8RaAwAnt2ed15IATLg8XoXLNj4EAAAAXsN8AAAB&t=IPF.Note
Error while crawling LOB contents.
Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
System.InvalidOperationException An internal server error occurred.
Try again later.; SearchID = 4E8542D3-48EF-404E-8025-8D9AAEFE777A )
We thought it's a throttling issue / found possible solution:
http://powersearching.wordpress.com/2013/07/23/exchange-public-folders-search-fail-error-while-crawling-lob-contents/
Tried it, still same Error messages, problem not resolved.
Any hints? Please advise.
With best regards
bostjancHi Bostjan,
From the error message, the issue might be caused by throttling policy on Exchange side. And the article you posted provides the right solution, some modification to the solution and please try again.
For throttling policy part
1.Execute the command for Set-ThrottlingPolicy
Set-ThrottlingPolicy SharePoint -RCAMaxConcurrency Unlimited -EWSMaxConcurrency Unlimited -EWSMaxSubscriptions Unlimited -CPAMaxConcurrency Unlimited -EwsCutoffBalance Unlimited -EwsMaxBurst Unlimited -EwsRechargeRate Unlimited
2.Execute the command Get-ThrottlingPolicy SharePoint to double confirm the policy setting has been successfully executed
For registry key part
1. Start Registry Editor (regedit).
2. Navigate to the following registry subkey:
\\HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
3. Right-click ParametersSystem, point to New, and then click Key.
A new key is created in the console tree.
4. Rename the key MaxObjsPerMapiSession, and then press Enter.
5. Right-click MaxObjsPerMapiSession, point to New, and then click DWORD (32-bit) Value.
The new value is created in the result pane.
6. Rename the key to <Object_type>, where <Object_type> is the name of the registry object type that you're modifying. For example, to modify the number of messages that can be opened, use objtMessage. Press Enter.
7. Right-click the newly created key, and then click Modify.
8. In the Value data box, type the number of objects that you want to limit this entry to, and then click OK. For example, type 350 to increase the value for the object.
9. Restart the Microsoft Exchange Information Store service.
If it still doesn’t help, please check ULS log for related error message.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Database mailbox grow quickly Exchange 2010 SP3
Hello.
Since we migrated from Exchange 2003 to
2010, the growth of our databse mailbox
is excessive. We have a total mailbox
size hovering around 75 GB and the size of
the database is 120 Gb.
Mailbox quotas are very
limited and 90% of users move emails
from mailbox to PST personal folders.
I get the impression that the space freed by removing
emails or move them to PST
is not claimed as White Space
and hence the excessive growth of
the DB.
I have seen that there is a fix to solve this
problem for versions prior to Exchange 2010
SP3 but the current version we have
implemented and it is with SP3.
Any idea to find out what is happening and
how to fix it?
Thanks in advance and best regards.
tzariksiHi.
I have reviewed the total size the mailboxes
and Dumpster with the following command:
Get-MailboxDatabase"MailboxDatabase"|Get-MailboxStatistics|SortTotalItemSize-desc|ftdisplayname,TotalItemSize,itemcount,TotalDeletedItemSize
The result is:
•Total Mailbox size(GB)->82,213
•Total Dumpster size(GB)->14,531
•Total ->97,344
The size of the DB using the command:
Get-MailboxDatabase-Status|Sort-ObjectDatabaseSize-Descending|Format-Table
Name,DatabaseSize,AvailableNewMailboxSpace
Is as follows:
Name
DatabaseSize AvailableNewMailboxSpace
MailboxDatabase 107.4 GB (115,302,531,072 bytes) 1.438 GB (1,544,486,912 bytes)
The actual disk size occupied
by the MailboxDatabase is->112GB
What else may be using the space in theMailboxDatabase?.
Thanks and regards.
Pedro.
tzariksi -
Exchange 2010 SP3 Rollup 8 and Rollup 7
Hi
I have a customer with a Small Business Server 2010 with Exchange 2010 SP3.
The Customer installed updates on the server 10/12/2014 where Rollup 8 for Exchange was included.
After that the Customer has a lot of problems with connection from Outlook to Exchange and they phoned us.
We have looked on the problem and found a Microsoft article about rollup 8 where they said DO NOT INSTALL
We ran Windows Update again on the 13/12/2014 where Rollup 7 was installed
The customers still has problems with connection from Outlook.
One of the errors:
From: Systemadministrator
Sent: 15. december 2014 10:54
Subject: Unable to be delivered: Test
This message did not reach one or all of the recipients.
Subject: Test
Sent:15-12-2014 10:54
Unable to deliver to the following recipient(s):
MST the 15-12-2014 10:54
This message could not be sent. Try to send the message again later, or contact the networkadministrator. Error [0x80004005-00000000-00000000].
Another error in Application log:
Log Name: Application
Source: MSExchange Common
Date: 16-12-2014 08:09:00
Event ID: 4999
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: <servername>.<domain>.local
Description:
Watson report about to be sent for process id: 9340, with parameters: E12, c-RTL-AMD64, 14.03.0224.001, M.E.RpcClientAccess.Service, M.E.RpcClientAccess.Handler, M.E.R.H.ViewCache.IsRowWithinUnreadCache, System.IndexOutOfRangeException, 8e38, 14.03.0224.001.
ErrorReportingEnabled: False
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange Common" />
<EventID Qualifiers="16388">4999</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-12-16T07:09:00.000000000Z" />
<EventRecordID>174679</EventRecordID>
<Channel>Application</Channel>
<Computer><servername>.<domain>.local</Computer>
<Security />
</System>
<EventData>
<Data>9340</Data>
<Data>E12</Data>
<Data>c-RTL-AMD64</Data>
<Data>14.03.0224.001</Data>
<Data>M.E.RpcClientAccess.Service</Data>
<Data>M.E.RpcClientAccess.Handler</Data>
<Data>M.E.R.H.ViewCache.IsRowWithinUnreadCache</Data>
<Data>System.IndexOutOfRangeException</Data>
<Data>8e38</Data>
<Data>14.03.0224.001</Data>
<Data>False</Data>
<Data>
</Data>
</EventData>
</Event>
What to do ?
Best Regards
John BHi John,
Please type
outlook /safe in RUN to start Outlook in safe mode and then check if this issue still exists. Meanwhile, please run Exchange Best Practices Analyzer and check if find relevant issues.
à
This message could not be sent. Try to send the message again later, or contact the networkadministrator.
Error [0x80004005-00000000-00000000].
The issue typically occurs if send messages to a large number of recipients.
When this issue occurred, did you check if send message successfully via OWA?
à
We have looked on the problem and found a Microsoft article about rollup 8 where they said DO NOT INSTALL
Did you mean this article:
Exchange releases: December 2014?
à
We ran Windows Update again on the 13/12/2014 where Rollup 7 was installed
From the Event ID 4999, I noticed that point to
14.03.0224.001, it should mean the old Exchange Server 2010 SP3 Update Rollup 8. From above
mentioned article (Exchange releases: December 2014),
Exchange Server 2010 SP3 Update Rollup 8 has been re-released to the Microsoft download center resolving a regression discovered in the initial release. The update RU8 package
corrects the issue which impacted users connecting to Exchange from Outlook. The updated RU8 package is version number 14.03.0224.002. Just a confirmation, did you
reinstall that re-released Exchange Server 2010 SP3 Update Rollup 8? Any difference?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Exchange 2010 SP3 maximum journal mailbox size for performance
Hello all,
Does anyone know if there is a limit mailbox
size near 01 terabyte than
above it generates performance problems?
We have a journaling mailbox that
reached today 1.077 GB and
from there began the process very
slowly messages to store.
All (4) Exchange Hub Trasnport that try to connect to this store get an 4.32 store drive error. A new
journal mailbox was created in the same
database, and the problem was solved.
Thanks
João Paulo.
Exchange 2010 SP3 RU8 on-premissesHi Paulo,
Base on my knowledge, journaling mailbox as the same as any other mailbox, the maximum size depends on the data to be stored in the mailbox, the hardware resources available, and the disaster recovery requirements
for the server where the journaling mailbox is located.
If you configure journaling mailboxes without storage quotas, monitor the Mailbox server to ensure that it doesn't exceed the available hardware resources or disaster recovery capabilities.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support -
Exchange 2010 SP3 with Update ROllup 8-v2
Event Viewer/APP contains a lot of this errors:
Content Indexing function 'CISearch::EcGetRowsetAndAccessor' received an unusual and unexpected error code from MSSearch.
Mailbox Database: Production Databases
Error Code: 0x80041606
We have tried with runing: C:\Program Files\Microsoft\Exchange Server\V14\Scripts\ResetSearchIndex.ps1 on Exchaneg server and restarting Information Store, but errors still appear.
Any hints how to fix this error?
With best regards
bostjancHi,
Basically there's a problem with the catalog data for the database, we need to recreate it. Please try the following method first to check this issue.
On the Exchange server that's hosting the database that's giving you the error. Start > In the search/run box type services.msc {enter} > Locate the Microsoft Exchange Search Indexer Service and stop it.
Navigate to the folder that holds the problem Database (By default, the path is: C:\Program Files\Microsoft\Exchange Server\V14\Mailbox\Mailbox Database). Within the folder you will find another folder called CatalogData-xxxxxxxxxxxxxxxxxx > Delete this
folder.
Then restart the Microsoft Exchange Search Indexer Service.
The catalog will now rebuild.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support -
Hi there!
I have a problem which makes me very angry already :)
I have two servers Exchange 2010 SP3 with MB role started on Windows Server 2012. I decided to create a DAG.
I have created the prestaged AD object for the cluster called msc-co-exc-01c, assigned necessary permissions and disabled it. Allowed through the Windows Firewall traffic between nodes and prepared the File Share Witness server.
Then I have tried to add nodes. The first node has been added successfully, but the second node doesn't want to be added :). Now I can add only one node to the DAG. I tried to add different servers first, but only the first one was added.
LOGS on the second nodes:
Application Log
"Failed to initialize cluster with error 0x80004005." (MSExchangeIS)
Failover Clustering Diagnostic Log
"[VER] Could not read version data from database for node msc-co-exc-04v (id 1)."
CMDLET Error:
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:06:21
MSC-CO-EXC-02V
Failed
Error:
A database availability group administrative operation failed. Error: The operation failed. CreateCluster errors may result from incorrectly configured static addresses. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode()
(MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed. [Server: msc-co-exc-04v.int.krls.ru]
An Active Manager operation failed. Error An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode() (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed..
This operation returned because the timeout period expired
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.174.1&t=exchgf1&e=ms.exch.err.ExC9C315
Warning:
Network name 'msc-co-exc-01c' is not online. Please check that the IP address configuration for the database availability group is correct.
Warning:
The operation wasn't successful because an error was encountered. You may find more details in log file "C:\ExchangeSetupLogs\DagTasks\dagtask_2014-11-17_13-54-56.543_add-databaseavailabiltygroupserver.log".
Exchange Management Shell command attempted:
Add-DatabaseAvailabilityGroupServer -MailboxServer 'MSC-CO-EXC-02V' -Identity 'msc-co-exc-01c'
Elapsed Time: 00:06:21
UPD:
when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
on both nodes.
It's confused me, because there is normal connectivity between these DAG members through the main interface.
Please, help me if you can.Hi, Jared! Thank you for the reply.
Of course I did it already :) I have new info:
when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
on both nodes.
It's confused me, because there is normal connectivity between these DAG members through the main interface. -
Exchange 2010 SP3 Create Dynamic DL for Direct Reports
I am not sure this is possible but if there is a will there is a way I guess.
System: Exchange 2010 SP3 on Windows Server 2008 R2
I am trying to see if there is a way to create dynamic DLs for Manager(s) direct reports.
Example: Manager has 5 people that report directly to them, is there a way to make an dynamic email distribution list that will poll the direct reports as people leave or hired.
I know I can create one manually but some depts. may have high turnover rates which increase overhead so I am just trying to simplify the process. I of course googled my question but not getting the results I intended.
Thanks.hi,
as from above i understand you are asking about creating an custom attribute and then referencing them .. if yes please check below command
Get-Mailbox -OrganizationalUnit Sales | Set-Mailbox CustomAttribute1 "SalesOU"Now you can create an e-mail address policy for all recipients that have the CustomAttribute1 property that equals SalesOU, as shown in this example.
New-EmailAddressPolicy -Name "Sales" -RecipientFilter { CustomAttribute1 -eq "SalesOU"} -EnabledEmailAddressTemplates "SMTP:%s%[email protected] check this.. http://technet.microsoft.com/en-us/library/ee423541%28v=exchg.150%29.aspx
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin
Maybe you are looking for
-
Cannot open iTunes: Unknown error (-50)
Greetings, Just trying to open iTunes ang go to Applications - which worked with no trouble up to right now - and get the following error: "We could not complete your iTunes Store request. An unknown error occurred (-50)" I have seen references in th
-
I'd like to cancel my Adobe PDF pack subscription
Id like to cancel my Adobe PDF pack subscription.
-
Ise & vlan load balancing (user balancing)
As far as I know anb based on some esperience in a test environment it seems that cisco ISE among two load balancing radius kind of attributes supports only vlan gropu assignment, this means that on the switches vlan group assignment is required. A s
-
My macbook pro says Shockwave Flash plug-in has crashed pretty much every day. I have to shut the computer down and restart to fix it. Is there any way I can keep this from happening?
-
Table maintenance dialog event to modify the screen
Hello All, Can anyone tell the Event in table maintenance generator where I can grayout the few fields of the SM30 screen dynamically? Thanks in advance. Best Regards, Sasidhar Reddy Matli.