Email encryption in Exchange Server 2007

Dear Support Team,
Now, current environment is Exchange Server 2007 and Outlook 2007. We have some question.
1. How do I scan external/public domain before email sent out? Should I config in Exchange and Outlook 2007?
2. How do I encrypted email? Do you suggested solution? required 3rd party? Exchange or outlook?
3. Can I encrypted email only email that send to external email?
Thank you.

Hi,
According to the descritpion, I know that you want to make sure the messages that you sent out be safe.
Please refer information below:
Encrypt all outgoing messages
Choosing to encrypt all outgoing messages means, in effect, your e-mail is encrypted by default. You can write and send messages the same as with any other e-mail messages, but all potential recipients must have your digital ID to decode your messages.
On the Tools menu, click Trust Center, and then click
E-mail Security.
Under Encrypted e-mail, select the
Encrypt contents and attachments for outgoing messages check box.
To change additional settings, such as choosing a specific certificate to use, click
Settings.
Click OK twice.
More details to see:
http://office.microsoft.com/en-001/outlook-help/encrypt-e-mail-messages-HP001230536.aspx#BM2
Please correct me if there is any misunderstanding.
Also find a similar thread for your reference:
http://social.technet.microsoft.com/Forums/exchange/en-US/a0acf5e1-7525-4ce9-b487-a112a881b4ce/sending-encrypted-emails-externally
The RMS is supported in Exchange org. More details to refer:
New Rights-Protected E-Mail Functionality with RMS
http://technet.microsoft.com/en-us/library/bb123950(v=exchg.80).aspx
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Similar Messages

How to move all emails from mailbox to an external email account in Exchange Server 2007?

I have a user who is leaving the university in a few days. The user would like to forward all of their old emails from their mailbox to their G-mail account. Will setting up email forwarding forward all of the old emails to the G-mail account or just the
new emails that are received after setting up email forwarding? If forwarding isn't the correct solution; then what is? We are running Exchange Server 2007.

No, as you've suspected the forwarding will only affect new messages coming into the mailbox, not existing ones. Additionally, if you did get all existing messages to forward to another account (you could probably do it by creating a rule in Outlook) then
the gmail account would show every single one of them as arriving now, and lose their existing send date.
Probably a better option would be to export the mailbox to .pst, and then assuming the user has their gmail account configured in Outlook somewhere as something other than POP3 they can then open the .pst file on their machine and copy the messages over
to their gmail account, which I think would also preserve the original information.
You could do that via the server using Export-Mailbox as described here
http://technet.microsoft.com/en-gb/library/bb266964(v=exchg.80).aspx (note it has to be run from a 32-bit OS with the Exchange Management tools installed), or the user could just as easily do it themselves from within Outlook using the Export option.

MimeMessage.reply() issue with MS Exchange Server 2007 Emails

I have an application that retrieves emails from an MS Exchange Server 2003 mailbox. The data from each message is read, validated and conditionally loaded to a table. If the message doesn't pass validation, a rejection email is sent back to the sender with an error message and a copy of the email. (We're using Java 1.5. However, I test with both 1.5 and 1.6.)
Also, if the message passes validation, positive notification is sent back to the sender.
Both processes use the method: javax.mail.Message.reply()It's coded as:
MimeMessage reply = (MimeMessage) message.reply(false);My organization is in the process of migrating to MS Exchange Server 2007. We've found that the reply() method no longer finds the sender method, thus unable to create a reply message. The error message we receive is:
javax.mail.SendFailedException: No recipient addresses
     at javax.mail.Transport.send0(Transport.java:110)
     at javax.mail.Transport.send(Transport.java:80)
     at org.ccci.gms.datacollector.DataCollector.sendReply(DataCollector.java:514)
     at org.ccci.gms.datacollector.DataCollector.processMessages(DataCollector.java:162)
     at org.ccci.gms.datacollector.DataCollector.main(DataCollector.java:101)After creating the MimeMessage object from the reply() method, I printed out the email header detail from both 2003 and 2007 messages. You'll note from below that the "To" or recipient address is missing from Server 2007.
MS Exchange 2003 works fine
From: [email protected]
To: [email protected]
Subject: Re: Report
In-Reply-To: <[email protected]>MS Exchange 2007 no longer works
From: [email protected]
Subject: Re: Reports
In-Reply-To: <[email protected]>I know I could just use the "addRecipient()" method to get around this problem. I wanted to know if anyone has encountered this issue. Please share the resolution. Any suggestions will be greatly appreciated.
Thanks,
LaelW

When the original message is accessed using IMAP, the reply method uses the information in the
IMAP ENVELOPE to determine where to send the reply. It first looks for the Reply-To address
in the ENVELOPE, then the From address.
Interestingly, when not using IMAP, the getFrom method returns the Sender header if the From
header is empty. The IMAP-specific code doesn't do that, although perhaps it should.
It would be interesting to compare the ENVELOPE data from the protocol trace in the two cases.
The ENVELOPE data will follow this syntax:
envelope     = "(" env-date SP env-subject SP env-from SP
          env-sender SP env-reply-to SP env-to SP env-cc SP
          env-bcc SP env-in-reply-to SP env-message-id ")"
So it's the first three address fields after the Subject that are relevant. If the From and Reply-To
fields are NIL, but the Sender field has a valid address, let me know. I should probably fix the
IMAP provider to fall back to the Sender field if the From field is missing.

Exchange Server 2007 shows email as "Receive" but not "Deliver"

Hi Guys
We have Exchange Server 2007 inside of a SBS 2008 set up.
One specific email from a regular sender wasn't received by the recipient. The recipient is used to receiving messages from this sender and the email is not hiding within Outlook.
Exchange 2007 mail tracker shows the email was received, but that's it. Nothing has happened to the email after that. Normally we'd see a "Deliver" report, or possibly a "Fail", but always something to show the email has been actioned
in some way.
The queues are all empty.
So, this one email has disappeared into the ether of Exchange! So far as I can see, this is the only email with only a "Receive" notification. All others have something else immediately following the Receive.
The Server has GFI anti-spam installed, but that hasn't seen the email either, because emails are collected by Exchange before being passed to GFI. In this instance it hasn't been passed, or returned to the sender as undeliverable. It just seems
to have been eaten.
Would anyone have any sensible suggestions on where to start kicking this email back into life?

Hi Simon
Apologies for the late response, but I only get to this client once a month.
1. Did the sender get NDR? ~ No
2. Let the receiver check the email via OWA and see
whether the email is available. ~ Still not available
3. Use MFCMAPI to check the user mailbox, can you
find the missing email? ~ I haven't yet worked out what is MFCMAPI or how to use it to check, but I suspect that as the Exchange email tracker doesn't have any actions after "Receive" that it cannot have sent the email on to the user's mailbox or rejected
the email as non-deliverable.
The client isn't too willing to expend too much effort
/ cost on this issue which does appear to be a one-off glitch, but I am interested in resolving it for myself as I haven't heard of this problem before.
Thanks for the interest,
Michael D

Exchange Server 2007 OWA users can receive email but can't send

Hi,
I have an Exchange server 2007 in an SBS 2008 environment with POP3 connector configured and working fine , smtp send mail connector configured.
Now users can connect to OWA, receive email but cant not send.
smtp connector works fine from Outlook client. Tried to track the emails from exchange server management console and I get the
SEND DELIVER SUBMIT TRANSFER.
The emails go to the sent items folder, but it never reach the recipients.
Have been troubleshooting for a while without succes. Any help will be most appreciated.
Regards
Faisal

POP3 is a single mailbox client mail retrieval protocol, not a mail transport protocol.
Any attempt to use it as a mail transport protocol is a great big kludge.
Exchange is designed to connect to the Internet using SMTP.
No version of Exchange has a POP3 connector.
I recommend that you post this in the SBS Forum: http://social.technet.microsoft.com/Forums/en/smallbusinessserver/threads
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Exchange server 2007 stop receiving emails

i have a strange issue with our exchange 2007 server, and i hope any one can help me, each day i have one of our exchange servers can't receive emails, and all emails sent to users in this servers are queued in the sending email server, and i have to manually
restart the Microsoft exchange transport service in this server so that it's able to receive emails, i found an error in the server that always repeated with different parameters
the error is
Error ID: 4999
Error Source: MSExchange Common
Watson report about to be sent to dw20.exe for process id: 3508, with parameters: E12, c-RTL-AMD64, 08.02.0254.000, edgetransport, M.E.Transport, M.E.P.S.SmtpInServer.HandleConnection, System.NullReferenceException, 69f8, 08.02.0254.000. ErrorReportingEnabled:
False
i receive the same error each time the server stop responds but the parameters is changed each time (Process ID number always changed) like below
Watson report about to be sent to dw20.exe for process id: 3644, with parameters: E12, c-RTL-AMD64, 08.02.0254.000, edgetransport, M.E.Transport, M.E.P.S.SmtpInServer.HandleConnection, System.NullReferenceException, 69f8, 08.02.0254.000. ErrorReportingEnabled:
False
i hope any one can help me solving this problem
the server is windows server 2008
Exchange 2007 SP2 Server Rollup 5
McAfee Enterprise Antivirus is in the box
Backup Exec Agent is in the box Also
a lot of transport rules applied to our exchange organization
Mahmoud Sabry IT System Engineer

Hi
As per the information and details provided by you, Exchange server 2007 stop receiving emails, then please follow these steps: -
If you do have a 60 GB partition on the C: drive, one of the first signs of trouble is when the free space on C: drops below 2GB. Exchange 2007 stops receiving external
emails. This is caused by a condition known as Back Pressure.
Please check the following: -
Check the nslook up for correct MX record.
Run the exbpa and llok for any recent changes.
Check for the device in perimeter network which accepts connections on port 25 FW or any other anti spam device).
Try to run a telnet session from the firwall and then out side and drop email on the server.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

Journaling - Exchange Server 2007 Outlook POP Email Account

Hi there,
My current setup:
In Outlook
Account 1: Exchange Server Email Account
Account 2: Other Email accounts using POP setting (Only when outlook is open send/receive emails and used only via outlook)
Email Store -Incoming
Account 1: OST Cache -Inbox Folder
Account 2 :Same as account 1 (Emails are replicated on Exchange Server) so they are available through OWA.
Email Store - Outgoing
Account 1: OST Cache –Sent Folder
Account 2 :Same as account 1 (Emails are replicated on Exchange Server) so they are available through OWA
All emails are stored on Exchange Mailbox.
Now I will need to activate Journaling on Exchange Server 2007.
Will all email be collected in journal (Exchange+POP)?
If not how can this be done?
I will need an automatic way of doing it (maybe using Outlook rules - received/send via a specific account).
This is required as I am planning to implement
GFI Mail Archiver.
Thanks,
Rajiv

Exchange journaling only journals Exchange messages - it is not an Outlook-dependent system, nor does it journal everything that Outlook can access. It is server-side only - messages sent through the Exchange system will be journaled because they hit
the Exchange server; messages sent through POP accounts will not, since they never see the Exchange server.
So, messages you receive in the POP mailbox will not be journaled, but since all messages you send go out through Exchange, they will all be journaled.
Oh, and one more thing you need to know: all messages that are already in your mailbox will not be journaled - Exchange journals what is delivered through the transport system, not what is in the mailboxes already.

Spam Protection for Email showing Critical for Exchange Server 2007 after installing Symantec Mail Security for Microsoft Exchange

Hi there,
I have SBS 2008, and I have recently installed Symantec Mail Security for Microsoft Exchange version 7.5 but when I take a look on Windows SBS Console under Security, it shows "Spam Protection for Email Critical Exchange Server 2007" However,
when I open the SMSME it shows running well with no problem..
Any Suggestions???
Thanks

Hi,
Would you please let me confirm whether all functions (which are related to Exchange Server) run as normal? Just
a confirmation, thanks for your understanding.
Please run
SBS BPA and check if find relevant issues. In addition, please refer to GaryD9’s suggestion in following thread and check if can help you.
SBS
2008 & Forefront Protection 2010 for Exchange - SBS Console Error
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

HELP - Exchange Server 2007 Transport Rule Issue

Hi all,
sorry if here is not the place to put my question but I did not find another forum, so if anyone can help me I appreciate.
- I have an Exchange Server 2007 SP3 environment with 1 MBX Server and 3 CAS/HUB Servers.
- I have created a Transport Rule that said:
"all emails that have @test.com in BCC field are dropped off except one group can send" .
The issue is the rule doesn´t work.
Anyone can help me, please?
Thanks in advance.
Luiz

The Exchange previous versions forums are here:
http://social.technet.microsoft.com/Forums/en-US/category/exchangeserverlegacy
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Exchange Server 2007 Transport Agent Issue

This is the first time i am working on Exchange Server Development. Below is a simple Transport Agent that i am using, this agent should simply update the email Subjects
as shown below in the code.
using System;
using System.Collections.Generic;
using System.Text;
using Microsoft.Exchange.Data.Transport;
using Microsoft.Exchange.Data.Transport.Smtp;
namespace MyAgents
public sealed class MyAgentFactory : SmtpReceiveAgentFactory
public override SmtpReceiveAgent CreateAgent(SmtpServer server)
return new MyAgent();
public class MyAgent : SmtpReceiveAgent
public MyAgent()
this.OnEndOfData += new EndOfDataEventHandler(MyEndOfDataHandler);
private void MyEndOfDataHandler(ReceiveMessageEventSource source, EndOfDataEventArgs e)
e.MailItem.Message.Subject = "This message passed through my agent: " + e.MailItem.Message.Subject;
Below is the Powershell script i am using to install the Agent.
Net Stop MSExchangeTransport
Install-TransportAgent -Name MyAgent -AssemblyPath EmailLogger.dll -TransportAgentFactory MyAgents.MyAgentFactory
Enable-TransportAgent -Identity MyAgent
Net Start MSExchangeTransport
Agent installed successfully using Exchange Management Shell.
Now when i send/receive emails in exchange, Email subjects are not modified. Emails have their original subjects. I don't know why?
I also performed the steps mentioned in below links to debug the Agent but breakpoints are not being hit by Visual Studio Debugger.
sf-tools.net/Messaging/tabid/55/EntryId/163/Exchange-2010-Transport-Agent.aspx
stackoverflow.com/questions/12347123/debugging-ms-exchange-2007-transport-agent
omarjames.com/blog/index.php/debugging-exchange-transport-agent/
My System Configuration
I am using the Exchange Server 2007 Virtual Machine provided by Microsoft from link below
microsoft.com/en-pk/download/details.aspx?id=14901
I also installed the Visual Studio 2008 on the VM for debugging.
Please help me in resolving the issue?

How are you testing this ? a SmtpReceiveAgent will only fire when the server receives email over SMTP. So if your just logging on and sending an Internal Email (eg mailbox to mailbox) or sending Email externally then the
SmtpReceiveAgent wont fire. For a single server if you want to capture all email you need to use a router agent see
http://blogs.technet.com/b/postwoman/archive/2010/09/14/step-by-step-how-to-create-a-routing-agent.aspx
. If you want to test what you have try sending an email to mailbox over SMTP using an SMTP client or Telnet
http://exchange.mvps.org/smtp_frames.htm
Cheers
Glen

Hi, in our Enterprise environment, we have a single mac with Mavericks version 10.9.2 and Office for Mac 14.4.1. When setting up outlook, we are trying to connect to a mailbox on exchange server 2007.

Hi, in our Enterprise environment, we have a single mac with Mavericks version 10.9.2 and Office for Mac 14.4.1. When setting up outlook, we are trying to connect to a mailbox on exchange server 2007. We put in the EWS details in the server field since our autodiscover function is not functioning. But still it doesn't work. There are no errors, no popups. We turned on the logging and in the logs, it says a error of -3259. We are stuck and any help will be really appreciated.

I have a customer experiencing exactly the same issue. Their computer is running Windows 7 Pro with Office 2007 SP3. After seemingly exhausting all troubleshooting options, I backed up their data, formatted the hard drive and performed a clean install of
Windows and all their applications. It didn't solve the problem!
What's strange is the customer also has a laptop computer, running the same version of Outlook, and that doesn't experience any problems connecting to Office 365 on the same network.
My next step is to send the customer a new ADSL modem/router to try.
I have another customer on Office 365, also running Outlook 2007, and they also experience issues with emails sitting in the outbox while Outlook displays the status message “Outlook is trying to retrieve data from the Microsoft exchange server outlook.office365.com.”
In this case Outlook doesn't freeze/stop responding, like it does for the first customer I mentioned.

Exchange Server 2007 / Java issue

We have just upgraded to Exchange Server 2007. We have a couple of web apps that add an appointment automatically to users calendars using HttpClient PostMethod. Since the upgrade this no longer works. Any ideas or suggestions?

Hi,
From your description, I would like to verify the following things for troubleshooting.
1. Were you able to send and receive emails before?
2. What type of email account is configured in Outlook?
3. Please check if you can send and receive emails using OWA.
Best regards,
Amy Wang
TechNet Community Support

Grant Application Impersonation Rights for UPN on Exchange Server 2007

Hi,
I would like to know , how to grant application impersonation rights for UPN account in exchange server 2007 . As i am working for mailbox migration , i should have this rights . I can do impersonation rights for domain\username but not for [email protected]
Please anyone help me , how to grant permission for [email protected] .
Big thanks in advance.
.Thanks & Regards,
vinoth

Hi,
I have a test in my environment using Exchange 2007, you can use the following cmdlet to assign Application Impersonation rights to an account using UPN.
Get-ExchangeServer | where {$_.IsClientAccessServer -eq $TRUE} | ForEach-Object {Add-ADPermission -Identity $_.distinguishedname -User (Get-User -Identity
[email protected] | select-object).identity -extendedRight ms-Exch-EPI-Impersonation}
Get-MailboxDatabase | ForEach-Object {Add-ADPermission -Identity $_.DistinguishedName -User
[email protected] -ExtendedRights ms-Exch-EPI-May-Impersonate}
Note: Please change the "[email protected]" to the UPN you want to use.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support

Does Groupware portlet support Exchange server 2007

Hi ALL,
Does anyone had any idea, will the groupware portlet support Exchange server 2007. I tried with exchange 2003 is working with groupware.
Please let me know any ideas to display email, calender, tasks in the portal.
Thanks
Manu.

If groupware portlet is support for exchange 2007, is there any other options.

Mail / Calendar with Exchange Server 2007

Hi all,
We have a problem with Apple Mail and Calendar (Mountain Lion) connected to an Exchange Server 2007.
Apple Mail for no reason doesn't show the available data on the server. At first all goes right but after a few hours the data get corrupt. Folders disappear, mails aren't shown, ... The folders and mails are there in the server. I can check that with Outlook for Mac or on a collegues machine on Windows.
I tried:
- deleting the mail cache and mail data and restart
- removing the accounts and setting them up again
- creating a new user and trying mail in that user
None of those solved my problem.
Apple Calendar doesn't sync its data correctly. Example:
I create an event in calendar A. From that event I onvite calendar B to join the event. So far, so good. Everything just syncs fine. Then for some reason I delete the event from calendar A. In the server the event is still there. I checked in Outlook. This error is reproducable.
I tried:
- naming the user to <WORKGROUP>\<user>
- deleting the calendar cache and calendar data
None of those solved my problem.
Can anybody help me with this?

Hi and Welcome to the Forums!
The configuration I think you have is MS Exchange on the back end fronted (to the Internet) by Outlook Web Access (OWA). As such, Blackberry Internet Service is the interface between OWA and the BB...there is no direct interaction between the BB and the Exchange server. As such, only email will reconcile wirelessly in this configuration. Calendar, contacts, and other items must be reconciled via USB/BT tether.
Now, that said, there is a free solution to do what you desire -- it's called BES Express. BES is BlackBerry Enterprise Solution and provides OTA sync of email, calendar, contacts, etc. Full BES is not free. But BES-X is. If you truly require full reconciliation of all things from Exchange, I recommend you research BES-X.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Email encryption in Exchange Server 2007

Similar Messages

Maybe you are looking for