Email subject filter

I'm having trouble getting the email subject filter to work.  I am currently using redirector on my work laptop to push email to my Blackberry handset.  I am trying to build a subject filter that looks for one word in the subject line and does not forward the email if that word is found anywhere in the subject. 
For example, I select the subject filter and enter the word 'NEON'.  Next, I move this filter to the top of my filter list.  When an email arrives on my desktop with a subject of 'NEON 123' or 'NEON 234' or 'NEON 1: Alert', I would like it to be filtered and not forwarded to my handset.  Finally, I select the check box that says 'Forward messages to the device' when no filters apply.  Essentially, I am hoping the subject filter works with a partial match.  However, this does not appear to be the behavior.
Additionally, I've tried using * as a wildcard, but that doesn't appear to work either.  Any assistance is greatly appreciated.

Hi and Welcome to the Forums!
Perhaps these instructions will help:
KB05095 How to configure email message filters
Since you are using redirector, there might be a play based on the email server you are working off of...can you tell us what that is? (e.g., Exchange, Notes, etc.).
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Email spam filter

    I am using Intuit's GoPayment to process my credit card payments from customers.  GoPayment allows me to email a receipt to my customer but many do not have email addresses so I purchased the HP3522 ePrinter so that I could email the receipt directly to the printer's email address enabling me to provide them with a printed receipt.  The email spam filter is rejecting these emails.  Intuit creates the email and sends it with my gmail account listed as sender.  (I have the settings on the printer set to accept ANY addresses).  Anyone else have this issue?  
    I am able to send the receipt to myself and then send that email to the printer but that seems rather counter-productive and time-consuming.  Is there a way to get these receipts to print on this printer without this added step?? 
    I paid for the printer, the paper, and the ink cartridges - shouldn't it be MY decision if spam emails are using it up???  Please, let ME decide what is spam!!!

    Hi CARParts. The spam filter for email prints cannot be overridden. If the subject line is blank, that could be a reason it is being blocked, but I imagine it has something typed in. If you wish to print these receipts a workaround to consider would be to have them sent to your email directly and then save/convert them to a PDF file, and then send to the printer.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • How to set a form field that automatically saves as email subject title

    I am creating a form in acrobat 9 and want the submit to email button to automatically use the information from one of the text fields as the subject title of the email. So when the client submits the form at the end the PO number they have used will automatically be the email subject. Is there any way to do this? I have found an example created using javascript but I am very much a novice with this so I don't know where to start with this? Any help would be greatly appreciated

    Read this tutorial:
    http://acrobatusers.com/tutorials/dynamically-setting-submit-e-mail-address

  • Last opened email subject is shown when opening email with many destination addresses

    Platform IPAD2 64Gb, OS version 4.3.5 (8L1), English default language.
    Issue: email subject field contents not showing correctly.
    Today I received on my gmail account an email that was targeted explicitely to a group of over 60 addresses, all of them together in the "to:" field.
    on the left part of the screen I can properly see a part of the right subject of the email.
    If I access another email, then open that one, the wrong subject of the last opened email is shown in the right part of the screen, just under the long recipient list, and before the correctly shown date time and content.
    This happens consistently, and whatever other email I decide to open, its subject is shown in place of the right one.
    While having that email opened, if I kill the email application (doubleclicking home and then killing the mail icon), and then relaunch email, the email opens immediately, and the subject is correctly shown.
    I also had cases in which an attachment was not shown in the email, despite being there, and being visible as a clip icon on the left part of the screen (but this is a different issue).
    Marco Guardigli  ( @mgua )

    Unfortunately there isn't official commercial support for Mozilla Thunderbird from Mozilla Corp.. I believe some contributors here ([http://mozilla.magicfab.ca myself included]) do offer such support, though.
    ''Before doing anything else, please do exit Thunderbird completely and [https://support.mozilla.org/en-US/kb/profiles-tb#w_backing-up-a-profile backup the profile folder] - it contains all your email, settings, filters, etc.''
    Regarding your issue, it looks like the mail folder information may be corrupt. In the left pane, in the folder list, right-click on the Sent folder and select '''Properties'''. Choose "'''Rebuild Index'''" or "'''Repair Folder'''" - do you even have that option? Once done, exit TB completely and restart it.
    Updating to a newer version will help anyone help you, if only because some of the documentation for older Thunderbird versions is a bit harder to find and testing to try & reproduce your problem will be harder. Don't do this just yet, though :)
    After this issue has been addressed I would suggest considering using IMAP if your provider allows you to, and of course archiving your email to Local Folders and doing regular backups of your profile.
    If you want to arrange commercial support, contact me via the link I provided above and we can discuss rapidly. Otherwise I am fine continuing here, however I can only reply as time permits. I am in Montreal (so, EST time zone).

  • Email subject and sender data is missing for HTML contents

    Dear all,
    Good day. I tried to send an email with HTML codes to draw a table. It works, however, the email sender and subject are missing. And the email body looks like the following:
    To: abc From: xyz Message-Id: Subject: This is email subject. Mime-Version: 1.0 X-Mailer: SAP R/3 Internet Mail Gateway 4.6B1 Content-Type: TEXT/HTML; Charset="US-ASCII"; Name="NO NAME.HTM" Content-Transfer-Encoding: 7BIT
    Table header and contents.
    Anyone has idea on what it happens and what is the solution? Your help and advise are greatly appreciate. Thanks in advance.
    Regards,
    CN

    is there any problem with Background spools with SAP? We are running R3 here. And looks like its the spool background job that's creating the error. When i execute the report it shows all the record in print preview or if i print it.
    Please Help!

  • Email notification in human task: How to customize email subject.

    Dear all community members,
    I am using email notification service in human task to receive email notification if task is assigned to me. I have configured email notification in human task & I do receive the email in my inbox as assignee.
    The default email subject is like [Action Required: TASK_TITLE], I want to remove this [Action Required:] from email subject.
    I tried setting <%null%> in Notification Header in .task file but the email subject is still has Action Required.
    Is there any way to customize email subject so that I can get rid of [Action Required:] [FYI] in email subject.
    Thanks & Regards.

    I believe this will help - http://docs.oracle.com/cd/E23943_01/user.1111/e15175/bpmug_cust_res_bndl.htm

  • Email subject in taiwanese language

    Hi,
    Login to SAP with English language where program sends an email with attachment.
    Whether email subject can have taiwanese character?. If yes please let me know the steps requied.
    Thanks.
    With Regards,
    Gandhi Subramani

    Hi,
    Please find the link Below
    [Help|http://help.sap.com/saphelp_nw04s/helpdata/en/8c/11984197eb2e7be10000000a1550b0/content.htm]
    Thanks
    kalyan

  • Re: and Fwd: in Email Subject

    Is there any way to prevent the Re: and Fwd: from being added in front of the text in an email subject when an email is reply to or forwarded?
    Solved!
    Go to Solution.

    No, it is automatically added and can be edited out if you choose.
    But there is not an option to not have it.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Email Subject in Subscription Notification - customize wording?

    Hi all,
    we use EP6 NW04SPS11.
    Our users have discussions in Collaboration Rooms to which they can subscribe. Then they get an Email containing a link to the discussion.
    The Problem: in the email the word "subscription" is not really optimal, so we took the SUBSCRIPTIONADMIN_de.xml from etc/notifications to change the text in the mail body.
    But i can't find the place where the subject of the email is generated, there we always have the text "Subskription "<DiscussionTitle>". There had been an great discussion thread with doku about this but the Email Subject is still an open issue
    Customized Subscription Massage
    Any ideas out there ?
    regard, yann

    Hi Yann,
    this is a little bit tricky, though.
    The subject is taken from a property file inside this JAR:
    <i>\usr\sap\{REL}\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.km.cm.repository.service\private\lib\km.appl.repository.service.app.subscription_core.jar</i>
    When you open this JAR you'll find several translated property files. (Res_??.properties)
    Inside these files you'll find the mailing subjects.
    I'm not sure if this trick works...: Unzip the JAR, edit the file, zip the JAR. Test if this works...
    Maybe you'll have to redeploy the PAR (that contains the JAR). The PAR could be found here:
    <i>\usr\sap\{REL}\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd\com.sap.km.cm.repository.service.par.bak</i>
    Simply rename the par from <i>.par.bak</i> to <i>.par</i> (after changing the JARs content) then restart the portal. This will redeploy the PAR, with its content. This should do it, if the first one doesn't...
    Puh...I guess this should do it.
    Hope this works!
    Regards
    Dirk

  • How can I have the title of the document be in the email subject line automatically when sending?

    How can I have the title of the document be in the email subject line automatically when sending?

    It can be done if you use a script, like this one:
    this.mailDoc({cTo: "[email protected]", cSubject: this.title});

  • Customizing PO approval workflow POAPPRV for email subject/body changes

    Hi,
    The requirement is to modify the email subject/body of the emails sent to the suppliers once PO is approved.
    They would also like to remove the
    'From/To/Sent/Id' which is displayed as first section in body currently.
    I am new to workflow, so could you please guide me in achieving this?
    Is workflow customization only option?
    Do we have any other way in which the requirement can be accomplished?
    Thanks!

    >
    I would like to know how FYI gets appended before.
    in the body before the actual text, From/To/Sent/Id are all displayed. I would like to know where they are fetched from.
    I can understand it uses some template for email, but am unable to locate it.
    >
    The FYI is appended based on the type of notification. Since this message does not require any action from user, Oracle adds FYI.
    See http://apps2fusion.com/apps/workflows/327-workflow-notification-template to understand the template.
    >
    Also can you point me to good references for workflow customization.
    >
    You can look at
    Customizing seeded workflow steps
    http://www.workflowfaq.com/
    Anil Passi has good tutorials for this http://oracle.anilpassi.com/oracle-workflow-training-lesson-1-2.html
    See white paper at http://www.vivekasolutions.com/user_docs/WFCustomizationWP.pdf
    >
    Because this is the only change that am expected to do in this critical PO workflow. I dont want something else to be affected because of this.
    >
    As long as you stick to PO approval workflow, you won't affect other areas. If you modify the template (provided you find it), you may affect other areas.
    Sandeep Gandhi

  • Edit Workflow Mailer - Purchase Order Email Subject

    Hi,
    We have configured the workflow mailer to enable reminders to be sent out to approvers which relate to Purchase Order approvals that have not been responded to.
    However, as well as a reminder email being sent, there is also an email telling the approver that the previous email has been canceled. This has a the email subject prefixed with "Canceled:"
    Our problem is that users are seeing this and thinking that the Purchase Order has been cancelled. We therefore want to either edit the subject of this email, or stop it being sent.
    Any help/advice would be appreciated.
    Thanks,
    John

    JOhn
    I think this mail is sent by the workflow mailer using the item type System Mailer. This is auto generated notification when the notification itself is canceled or retired. You can customize the subject there based on the source.
    Thanks
    Nagamohan

  • Customizing Email Subject Line

    Can the email subject line be customized when sending my form? If so how do you change it?

    Hi,
    FormsCentral doesn't send emails for distributing the form. You, as the form author, are responsible for distributing the form.
    Regards,
    Brian

  • PDF forms - Change email subject to field content

    Hi,
    I created a fillable form with a sumbition via email button. When submitting, I need to replace the default email subject "Form Returned: fileName" with the content of a particular field.
    I have no idea where to start. Can you help? THanks, Jp

    wow! that was quick!I'll give it a try,  thank you! 

  • I have an email account on qou but all the incoming emails subject and body appear as question marks, why???

    I have an email account on QOU (al-quds Open University) but all the incoming emails subject and body appear as question marks, why???

    Try to set the Boolean pref <b>gfx.font_rendering.directwrite.use_gdi_table_loading</b> to <i>false</i> on the <b>about:config</b> page.
    *http://kb.mozillazine.org/about:config
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    Try to disable hardware acceleration.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"

Maybe you are looking for

  • Consuming webservice in a webdynpro component

    Hi Experts, I have a third party free webservice as WSDL link.My requirement is to make use of that webservice in my webdynpro component. Can any body give me a step by step approach to consume that webservice in my webdynpro Component. If possible,

  • How to set up one-button embed-hotlinking for Flash SWF?

    Hello, I'm publishing a webcomic in Flash.swf format and I'd like to make it as easy as possible for people to grab my comic and put it on their website. How can I set up one-button hot-linking that will automagically provide the code so that they ca

  • Connection closed

    Hi I just installed Oracle 8i and Oracle Enterprise Manager on a NT server machine. I already had a Oracle 8.0.x version sitting on the machine. The problem is that the enterprise manager can only connect to the old database, and when I tell him to t

  • All office programs crash when I click on the File menu

    I can open files in every program fine but as soon as I go to the File Menu it puts up the "program" is not responding box Excel, Word and PowerPoint all crash when trying for the File Menu. Outlook will let me go to the File Menu but if I click on O

  • How to select a different value based on $FLEX$ Value set

    Hi friends, am getting a column like position from positions_table.... now based on this value set am selecting another column from the same table like for ex amount...using $FLEX$.vlaueset_name now if the value in the table is 0 or null I should mak