Email switching to "read" after hovering

While scrolling through new email messages, message switch to "read" even after hovering for just a second, and going back to constantly change back to "unread" is a pain.  Can't find how to change this in my settings?  Help?  Thanks!

More info.  It's not RSYNC.  My LaCIE USB3 drive that has worked flawlessly as a RW volume decided that it is Read-Only.  My trick above does not work.  What a pain in the butt this is, and no answers from Apple as to why this happens.

Similar Messages

  • My iphone 5 stopped syncing to outlook email, calender and contacts after the IT department switched from a HP exchange server to MS2010 exchange server.  Help?

    My iphone 5 stopped syncing to outlook email, calender and contacts after the IT department switched from a HP exchange server to MS2010 exchange server.  Help?

    Try deleting your exchange account on your iPhone, then adding it again fresh.  I had the same problem when we upgraded servers and this fix worked for me.

  • Exchange email appears then disappears after one read !!

    Since installing OS 3.0 on my iPhone 3G my Exchange email appears then disappears after 1 reading.
    To get the emails back I go to the account settings and switch the Mail off (which removes the account and the folder format) then I switch the mail back on then the email are back again !!
    (if it can get through to the server, as I often get a Sever error message)
    Anybody else seen this problem?
    I don't use the Contacts or Calenders as currently through iTunes sync they seem OK.
    Note my Yahoo and other POP accounts have no problems.
    cheers

    Problem Solved- Atleast for me
    After going through this issue for more than 3 weeks, I was able to find the solution. For me emails continue to disappear but it was totally random. Calendar and Contact also disappeared but not as often as mail.
    The problem resides on Exchange OWA server. On IIS I have connection limit of 10 connections which we was causing this problem. After increasing the limit problem is gone.
    STEPS
    Search the logs under C:\WINDOWS\system32\LogFiles\HTTPERR for "503 1 ConnLimit", if you find this line then the solution is to increase the limit.
    To do that, go to, IIS Manager, Right click on Default Website (where OWA is hosted), properties and go to Performance tab. Under Website Connections, increase your current limit. Restart IIS Admin and try IPhone mail again.

  • Exchange SBS2003: Email that is deleted in Outlook 2010 is not deleted on iPhone 4, or marked read after upgrading to 6.0.1.  Win 7 64bit.  2 Other users in our office with iPhone 4 and iPhone 4s aren't having this issue.  They didn't upgrade to 6.0.1.

    Exchange SBS2003: Email that is deleted in Outlook 2010 is not deleted on iPhone 4, or marked read after upgrading to 6.0.1.  Win 7 64bit.  2 other users in our office with iPhone 4 and iPhone 4s aren't having this issue.  They didn't upgrade to 6.0.1 though.  Mail that is deleted or read on the iPhone 4 is deleted or marked read in Outlook 2010.  So it's a one-way problem.

    Exchange SBS2003: Email that is deleted in Outlook 2010 is not deleted on iPhone 4, or marked read after upgrading to 6.0.1.  Win 7 64bit.  2 other users in our office with iPhone 4 and iPhone 4s aren't having this issue.  They didn't upgrade to 6.0.1 though.  Mail that is deleted or read on the iPhone 4 is deleted or marked read in Outlook 2010.  So it's a one-way problem.

  • Apple iPad 3. BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Can anyone help me please.

    BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.

    All resolved at last
    Deleted the SMTP setting
    Recreated the SMTP using the same settings
    Able to send emails now
    No logic - as usual - just a bug!

  • My telus email no longer works after installing the new os Yosemite

    my telus email no longer works after installing the new os Yosemite

    This is a problem between Telus and Yosemite.  Telus, of course, blames Apple. 
    Check the box that says "Allow insecure authentication"  That will get your email working.
    However, this box will get un-checked when you stop start Mac Mail.  The next time you start Mail, you'll have to re-check it for each Telus account.  (This is the bit that Apple needs to fix.) 

  • When I send an email, a photo appears after my name in the sender line. How do I get rid of it?

    When I send an email, a photo appears after my name in the sender line. How do I get rid of it?

    I don't have a signature set up, but did a little research.  Someone posted that these will show up when I send an email to myself, but will not show up when sent to another person.  I sent a test email to a friend to check for sure.

  • PI 7.1 IMAP email Adapter Error reading large amounts of emails

    Hi,
    are there any known problems with the email-Adapter (Sender), reading IMAP MS Exchange Server?
    We have an email adapter reading the MS Exchange Server Mail Account once per Minute and in the mail account are about 4.000 unread email  (1KB each) .
    After 2000 emails, the adapter stops working and throws only exceptions.
    Any idea?
    Thanks
    hs

    Hi Holger,
    i made a few tests at that time, and there was no specific scenario which re-produced this error.
    In some tests i was able to process more than 3000 emails before the error occured, next time only 2000.
    And this only occured when the inbox had a huge amount of emails. if i moved, lets say 1000 emails to a temporary folder,
    processed 1000 and then moved the 1000 back to the inbox, there was no problem. Now i'm polling every minute and i'm
    not receiving 2000 emails in a minute, so i'm not having this issue anymore. it only happend when we stopped the
    sender channel for a while and a lot of emails were queuing up in the inbox.  I don't think that there are any MS Exchange settings that need to be changed and when we spoke to Support that time, they refered to the Note i mentioned earlier.
    Maybe there is still a problem in the mail adapter itself..
    regards,
    Daniel

  • My MCB Pro keeps booting when I switch it on after a shutdown???

    Hello Friends,
    My MCB pro (late 2011) was running perfectly on 10.8.2 for 2 months but yesterday i shut it down and when I shitched it on it kept on booting. After 10-15 minutes i had to switch it off by pressing and holding power switch. this happened again when i switched it on after a while. on the third attempt it started normally. Today the same thing happened and in the second attempt it started. whats happening??
    All application were closed when i shut it down. Please suggest??

    I suggest that you press and hold the option key whilst restarting your Mac.
    Then select the recovery partition.
    When it boots, choose disk utility, and verify your hard disk (Macintosh HD or whatever you have renamed it to).

  • Can't get email to go out after updating ios5. Settings look ok can receive incoming and can get to Internet   Help

    Can't get email to go out after updating ios5. Settings look ok can receive incoming and can get to Internet   Help

    Is this a POP account, or an IMAP account? Did you enable your account type in Gmail?
    You can verify whether or not you did (and enable it if you didn't) by logging into Gmail on the web. Then, open the 'Forwarding and POP/IMAP' tab on your 'Settings' page, and configure IMAP. After enabling IMAP in Gmail, make sure you click 'Save Changes' so Gmail can communicate with your mail client.

  • How come, when I add myYahoo! email account to MAIL, after verifying, I always get the "server unavailable. please try again later"

    How come, when I add myYahoo! email account to MAIL, after verifying, I always get the "server unavailable. please try again later"

    THANKS! this worked !!!
    I hit "DELETE THIS ACCOUNT" on my iphone (this is the Yahoo I tried to set up by "picking" it from the list that the iphone5 gives you) and then confirmed to delete everything.
    THEN: while in Mail (still in the Settings Section) I tapped on "ADD ACCOUNT..." but this time tapped on "OTHER" and manually put in my yahoo ID and password and I did not even have to go to the   SMTP or IMAP incomming/outgoing stuff at all. But I checked it out under the "ADVANCE" tab and it was already correct for yahoo. (ALMOST SEEMED TOO EASY)
    Went to my home screen and tapped on MAIL and my yahoo email loaded up just right!
    Now, I have no idea if I have any other issues like if I delete mail on the iphone; does it delete properly on my ipad...etc..etc. but one problem at a time is getting fixed. THANKS!

  • How to stop an email from being sent after I hit send?

    How can I immediately stop an email from being sent after clicking "send"?
    I can't seem to find any info on this. I am assuming that it is impossible. Correct?

    When sending the emails with larger attachments that take a little time to actually upload and get out, you can open the activity viewer by pressing command-0 (or is it command-o?--)--it may also be under the window menu at the top--I'm not at my Mac right now to check. The activity viewer has a stop button on it. After you stop it, you should be able to either delete the email from the outgoing mail folder or drag that email to another folder, such as the drafts folder. I've done this a few times without a problem.

  • My iphone is switched off suddenly n then it wont b started it continously shows the apple logo then again switched off automatically and when i charge it so it was switched on and after a long time then it shows battery low and then its also show 4% batt

    my iphone is switched off suddenly n then it wont b started it continously shows the apple logo then again switched off automatically and when i charge it so it was switched on and after a long time then it shows battery low and then its also show 4% battery what would i do im very tensed please help ...

    Hello s0ha1b
    If all you get is the Apple logo and it powering off, then the next step is to put your iPhone into recovery mode and then use iTunes to restore it. If you have a back up, then you can put that on there to once the restore is complete.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

  • Hi my girlfriend iphone 5 is switching off himself after few minutes of useing him.i was charged fully..there is the newest softwer plus is after restor to the factory settings...its showing flat battery but was charging full???

    hi my girlfriend iphone 5 is switching off himself after few minutes of useing him.i  charged him full then I install the newest softwer plus is after reset to the factory settings...its showing flat battery but was charging full???and still is switching off after some time.please help

    romifrommidleton wrote:
    Help some ideas thas what we askin all here...thanks anyway
    Do you not understand English? The "idea" we have given you is TO TAKE THE PHONE TO AN APPLE STORE OR AUTHORIZED SERVICE PROVIDER!!!
    If you want to follow the advice is up to you. No one here really cares what you do in the end.

  • Old emails won't load after upgrade to Mountain Lion

    old emails won't load after upgrade to Mountain Lion

    See if anything in here will fix it:
    1. Hold down the Command and Option keys as you click the iPhoto icon.
    The Photo Library First Aid window opens:

Maybe you are looking for

  • Travel Adapter

    Hello, I am going to Central America (specifically Belize & Guatemala) and will not be taking a laptop, which means I need a power adapter to charge my iPod. But, in looking at the adapters online none seem to conver Central America at all. Anyone ha

  • How to fix or stop postgres errors?

    10/5/11 7:41:12.633 PM org.postgresql.postgres: 2011-10-05 19:41:12 PDT FATAL:  could not create log file "/Library/Logs/PostgreSQL.log": Permission denied 10/5/11 7:41:12.634 PM com.apple.launchd: (org.postgresql.postgres[1234]) Exited with code: 1

  • Why have getInstance methods?

    Can anyone please explain what is the purpose of a getInstance method. If a class is abstract and cannot be instantiated why does the class allow you to make an instance of it by using a getInstance method. I find this concept very confusing. Cheers

  • 4.4 issues

    I have mac OSx 10.7.5 and have just upgraded to Lightroom 4.4, now all my files when I go to develop say 'file cannot be read' To be honest I am getting quite cross with LR4, I also have issues importing images from 5DmkII and 6D Files live on a DROB

  • Z1 Camera Condensation inside lens

    Hi, I have just returned from a week in Portugal, of which on the 22nd May I decided to use my phone for the first time under water in the pool.  I was physically in the pool for a couple of minutes, as whilst in the shallow end I was unable to take