Embedded BI in 2004s ECC 6.0

Dear BI/ECC 6.0 practitioners,
Is there a specific statement from SAP or paper out there regarding the embedded BI in ECC 6.0 ? I read note 855534 and it seems that SAP does not recommend separating BI from ECC 6.0.
This is very apparent, as one cannot order the BI CDs separately and BI. Once ECC 6.0 has been installed, BI is installed and you should have BI on a separate client.
What I am looking for is a clear document from SAP on this. We have some non-SAP-technical people here who holds the purse strings who cannot believe that this is the way it should be and SAP "would do such a thing", as some additional investments in hardware and infra. is required to maintain ECC+BI on one database.
Does anyone has any specific info., experienced this situation ? Any asssistance is greatly appreciated.
Regards
Wai-Hon Lam

Some Insights -
BI and ECC in same SID concept is totally new.
SAP deals this scenario on project to Project case basis ,while there are few advantages of it ,only select customers have enabled this option.If needed you need to talk to SAP abt this and answer with few questionaires with.
The installation of SAP NetWeaver components/usage types BW/BI, XI/PI, EP, MI, and/or DI together with SAP ECC in the same system instance (the same SID) is TECHNICALLY POSSIBLE but the following restrictions apply:
The installation of SAP NetWeaver MI (mobile infrastructure) in the same system instance (the same SID) with SAP ECC or any other NetWeaver component/usage type is currently not supported. Further is such an installation in view of a possible future upgrade not recommended.
The installation of SAP NetWeaver DI (development infrastructure) in the same system instance (the same SID) with SAP ECC or any other NetWeaver component/usage type is not recommended.
For the embedded installation of ECC and NetWeaver components/usage types BW/BI, XI/PI and EP the following points need to be considered:
If one of the components imposes specific requirements to the installation (e.g. XI: Unicode installation, double stack installation etc.) this always applies to the whole instance.
In an embedded installation, a common client for SAP BW and SAP ECC is not supported. SAP XI/PI must also be set up in a dedicated client.
Inform yourself about the supported platforms for each component/usage type you wish to install. Some components may feature platform restrictions. For more information, refer to SAP Service Marketplace at service.sap.com/platforms for support information of a common database and operating system platform.
For each component/usage type involved in the system stack a separate sizing is required using the respective sizing procedure. The total size of a server which can accommodate all components/usage types is the sum of the individual sizing results This applies to:
CPU sizing (SAPS)
Memory sizing
Disk space sizing
Note 855534 - Embedded NetWeaver Components in ERP addresses this issue.
Hope it Helps
Chetan
@CP..

Similar Messages

ESS with SAP ERP 2004 ECC 5.0

Hello,
with SAP R/3 we used the Employee Self Services via an external ITS. Now we are using SAP ERP 2004 ECC 5.0 with an installed Java AddIn without Enterprise Portal.
My Question is:
What ways are possible, so that we can use the ESS functionality?
My Ideas are:
1. Use the old external ITS and connect it to the new system.
Problem: Is the connection possible?
or
2. Use the existing services from the internal ITS.
Problem: It seems that some are not working - is it possible to activate them?
or
3. Use the WebDynpro-Technology without Enterprise Portal.
Problem: Will it work?
All information I could find, is, that none of the mentioned ways will work, but maybe someone tried to do the same and was successful.
Thanks for ideas,
André

Hello Andre,
I don't have experience with using ESS web dynpro applications standalone without EP but I believe that should work just fine. We use standalone web dynpro applications for our mobile ISR/PCR approvals where we access web dynpro application directly via Blackberry. You should be able to access any web dynpro application directly without EP iView - for certain services you will need to provide the correct attributes and values via URL though.
Hope that helps you a little bit,
Harald

Information on SAP: ERP 2004 ECC Component

Hi All,
We are performing a Pilot Project for one of our client, by integrating and harnessing the functionalities of technologies like SAP: Netweaver Portal (GUI), SAP: Exchange Infrastructure (Middleware), Manufacturing Execution System (MES) along with SAP: ERP 2004 (Client's scope).
Request all to suggest a good source (website) for collecting information on ECC component of SAP: ERP 2004.
Thanking you all in anticipation.
With regards,
Deepak Pai

Hi Deepak,
Help.sap.com is the best. Anyways what is area of information you are looking at? is it installation and configuration of the product or is it like what the product would offer.
You can close this thread as you have already posted the same query in the forum "Integration with mySAP ERP 2004"
Information on SAP: ERP 2004 ECC Component
Regards,
Naresh
[email protected]

How to use 0EC_CJOB_ATTR instead of 0JOB_ATTR in 2004S ECC HR?

Situation:
We did some enhancement (addition of fields) to the datasource 0EC_CJOB_ATTR. All the changes made to 0EC_CJOB_ATTR appear in 0JOB_ATTR as well.
1. But when trying to extract data in /nRSA3, 0JOB_ATTR is erroring out and 0EC_CJOB_ATTR does not give any data eventhough ECC maintains some data for some particular PERNRs. Is there any suggestion on what could be the reason?
2. In the standard cubes like 0PA_C01, 0JOB is used as a characteristics. What is the process to use 0EC_CJOB instead of 0JOB so that we can use the standard cubes and associated queries without customization? Any thoughts?
Thanks
Raj

HI experts,
Any thoughts? We desparately need some direction!!!

How to use 0EC_CJOB_ATTR instead of 0JOB_ATTR in 2004S ECC HR BI?

Situation:
We did some enhancement (addition of fields) to the datasource 0EC_CJOB_ATTR. All the changes made to 0EC_CJOB_ATTR appear in 0JOB_ATTR as well.
1. But when trying to extract data in /nRSA3, 0JOB_ATTR is erroring out and 0EC_CJOB_ATTR does not give any data eventhough ECC maintains some data for some particular PERNRs. Is there any suggestion on what could be the reason?
2. In the standard cubes like 0PA_C01, 0JOB is used as a characteristics. What is the process to use 0EC_CJOB instead of 0JOB so that we can use the standard cubes and associated queries without customization? Any thoughts?
Thanks

HI experts,
Any thoughts? We desparately need some direction!!!

Access to SAP Netweaver 2004s --- ECC 6.0

Good evening....
The question is: Must I install the java engine in my sap ECC 6.0 to access via web to SAP or isn't necessary ???
I've read in the marketplace and I think isn't necessary but I need to be sure.
I'll can access via web (internet explorer) to my SAP without install the java engine ???

if using SAPGUI through the internet, you do not heed JAVA.
if you want to go through a browser, I cannot say.

Faxing inside of mySAP 2004 ECC 5.0

Please excuse me if this is in the wrong section or if it is a dumb question. I just got hired to learn SAP/ABAP (I know nothing now) and the first task they gave me was to investigate a better way to fax inside of SAP. Right now we use Fax Commander but we are upgrading to ECC 5.0 and they would like another application that can integrate with SAP to allow faxing, email, etc.. of documents. The little research I did so far pointed me to DeliveryWare. Has anybody used it or do you have any other suggestions?
Thanks,
Aaron

Hi Shau,
I've read very interested your reply in this thread.
Actually we're trying to configure Esker Deliveryware v. 4.0 with SAP ECC 6.0 without success.
In our configuration the user, using trans ME22N, create a new message, put the fax number and send it. Then via SCOT transaction the fax is sent correctly.
The problems start when we expect the notification by Faxserver. It doesn't arrive by a problem of logon failed. We have changed password of fax user used, and also we have created a new user. We, also, have unlock various time the user but without result.
Besides we are in un upgrade project, we have tried to made same solution on
Production system (but on SAP 4.6c version) and all is running correctly.
Do you known if there are some incompatibilites between Esker and ECC 6.0 ?
Any suggestion and help will be very appeciated.
Regards,
Corrado

Problem During Installation of ECC 6 on Windows 2003

Here I am facing problem during Import ABAP Phase.
It is throwing Error like that::
CJS-30022 Program 'Migration Moitor' exists with return code 103.
After completeing 9 stages, it's getting problem in Import packages and installation get stucked.
My Server is like that:
OS: Windows Server 2003
Hardware: HP Itanium IA64
Database: Oracle 10.2g
SAP Release : 2004s ECC 6
I have configured Java with j2sdk 1.4.2_12:
JRE 1.5 is not available for IA64 .
I reconfigured the parameter "shared_pool_size" (to 400MB)in init<sid>.ora at \oracle\<sid>\database.
Also adjusted another parameter which is "shared_pool_reserved_size" i.e. 10% of the shared_pool_size.
What to do now.
Please send me feed backs.
Regards,
Sumanta Chatterjee
 

run 'ls -lrta' in /tmp/sapinst_instdir/.... (whatever the lowest path is there, where all the log files are). You should see something like sap<something>.tsk and sap<something>.log. Look at the most recently updated sap<something>.log file for the specific error. One problem I've seen is that if you configure the advanced oracle config to turn off AUTOEXTEND on the tablespaces, the abap load will bomb because it runs out of space. Also, make sure your SYSTEM tablespace has at least 500M.
Posting the relevant contents of the log with the detailed error description would help us provide a better answer as well.
Rich

Source system icons changes when connecting SAP BW to mySAP ERP 2004

Hi,
Just an Interesting observation in relation to the creation of source systems in SAP BW to SAP Web AS 6.40 based systems (mySAP ERP 2004, mySAP SRM, etc).
I thought it would be interesting to share!
The behavior is logical but can be a surprise for a BW administrator who is not aware of the new internal SAP BW systems within mySAP ERP 2004.
Scenario:
The customer was connecting a stand-alone BW system to two new systems with latest and greatest mySAP ERP 2004 (ECC 5.00) and mySAP SRM.
Observation:
In the past the SAP R/3 source system would be created with a "SAP R/3 icon" indicating a SAP Source system.
As of mySAP ERP 2004, the source systems will be created in the SAP BW standalone system with the "SAP BW System icon".
Note: This is also the same behavior for new releases of mySAP SRM, and other SAP applications that are based on SAP Web AS 6.40 or greater
Why?:
The standalone SAP BW system is connecting to a system that contains an internal SAP BW system. The standalone SAP BW system determines that it is possible to extract both from the internal BW System and from the Plug-in extractors. It simply denotes that this source system is a SAP BW system and uses the BW Source system icon. (Remember SAP BW is client independent*!).
Note: This behavior will still occur even if you do not use the internal SAP BW system within mySAP ERP! It is there whether you use it or not.
Second Note: You can still use the ERP Content extractors from the mySAP ERP Source System as you did in prior releases.
Another related observation:
I would expect that this case will probably be true even if you only use the internal SAP BW.
Scenario: You use the internal SAP BW in another client in the mySAP ERP system than your ERP processing.
Result: The connection between the BW client and the ERP client source system(s) (i.e. client 001 for ERP, client 100 for BW), both the 'myself' and ERP client source systems, will show up as BW source systems!
Source system 001 and source system 100 will be displayed as SAP BW icons because SAP BW is client independent*
user master and authorizations are client dependent
I hope this was interesting.
Cheers,
Mike.

Hello,
I used my user id to login. I recieved a message :
User already exists in source system I continue:
Anothre window pops up : "Check RFC connection" and it asks
'RFC connection already exists in source system . Do you want to check, use or cancel source system connection'
Here I select Use - but i get an error : Error in source system'.
how can i track down this error.
Kindly inform.
Regards,
Nikekab

Delta in 4.7 to ECC 6.0

Hi Guru,
Can anyone please provide me with the list of delta functionalities between 4.7 and ECC 6.0 in MM/WM module.
Thanks in advance.
Regards
Prashant

I have no idea how often questions like this have been answered here but I try to help you though.
Read the Release notes
http://service.sap.com/releasenotes
Read the deltas for ERP 2004/ECC 5.0 and ERP 6.0
Use the solution browser:
http://solutionbrowser.erp.sap.fmpmedia.com/
Markus

EPB 3.0 and ECC 6.0

Hi
Currently we are use EBP 3.0 with SAP R3 46C as a backend.
We will upgrade soon from R3 46C to ECC 6.0.
Is EBP 3.0 Compatible with ECC 6.0? do we have to upgrade EBP 3.0 too ?
Thanks,

Hi Momo,
There is an SNOTE 835267 related to SRM 2.0(EBP 3.0) can be connected to ERP 2004( ECC 6.0)
I dont think there is a possibility to connect EBP 3.0 to ECC 6.0.
Why dont you go for upgrade from EBP 3.0 to SRM 4.0 or more ( it is only suggession).
with regards,
mahesh

BW35 & ECC 500 in same system?

From the documents, and from the information from SAP, it appears that BW 3.5 can be installed into an ERP 2004 / ECC 500 system. Does anyone have any experience with this during the ECC 5 rampup?
I have a client that is considering this and would like to know of any gotchas before we hit them.

Hi Murray,
If you install or upgrade to mySAP ERP ECC 5.0, you will have SAP BW 3.5 automatically available in your ERP system. just the same way that you have Web AS 6.40 present too. This is a fully functional BW system!
If you customer is interested in using the internal BW system within your ERP system, I suggest you contact your SAP representative for more information.
Also there is a forum dedicated to the SAP NetWeaver integration with ERP. It is called "Integration with mySAP ERP 2004" and it is located in the SAP NetWeaver general section.
If you have specific questions about the impact of running the internal SAP BW with ERP, please post in that forum as it is continually monitored.
I hope this helps,
Mike.

SAP Best Practices --- is it available for mySAPErp 2004 ECC5.0

Is it possible to implement SAP Best Practices on mySAPErp 2004 ECC 5.0?
Also, is best practices available with the Discovery Box?
Thanks
Devendra Koppikar

Hi Devendra,
Yes, that is possible. If you like to find out the details I would like to recommend visiting the Service Marketplace. Just follow this link. It should directly take you to the information you are looking for:
http://help.sap.com/content/bestpractices/baseline/bestp_baseline_baseline_V500.htm
Best regards,
Frauke

Release date for ECC 6.0.

Hi,
Can anybody please tell me the release date for ECC 6.0.
Full points will be assigned.
Thanks,
JB

Hello JB,
mySAP ERP 2005 (ECC 6.0) was release on Sept 1' 2006
Here is some more release date information.
R/3
Version 3.1......................................... 1998
Version 4.0B...................................... 5/22/98
Version 4.5B...................................... 5/17/1999
Version 4.6B...................................... 1/31/2000
Version 4.6C...................................... 5/29/2000
Version 4.7 xt. 1.1.............................7/15/2002
Version 4.7 xt. 2.0.............................9/22/2003
mySAP ERP 2004 (ECC 5.0)...... 2005
mySAP ERP 2005 (ECC 6.0)...... 9/1/2006
Hope this helps.
Regards
Arif Mansuri

ESS implementation on MySAP ERP 2004

hi
we have ERP 2004 ECC 5.0 IDES version the online version of ESS is working fine, now we want to use ESS on portal.
now my queries are
what is the prerequisities for ESS on portal ?
is the java components for ESS are to be deployed on Portal Server?
How can setup the SLD for using WebDynpro Application on Portal?
and provide some guidelines to configuring ESS on the Portal Server
regards,
kaushal

Hi kaushal,
For ESS totally you need to download 3 Files and deploy them thro SDM.
Check the following thread to have a better idea:
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=70217">About Files to be downloaded for ESS BP</a>
Hope it helps.
Regards,
Vivek

Embedded BI in 2004s ECC 6.0

Similar Messages

Maybe you are looking for