EMET 5.1 is available. Which problems are solved?

EMET 5.1 was released today. On the EMET connect portal there isn't a announcement (yet) about the changes. A short list of changes can be found at
http://blogs.technet.com/b/srd/archive/2014/11/10/emet-5-1-is-available.aspx and/or
https://support.microsoft.com/kb/3015976#Changes. Several feedback items on EMET 5.0 we have submitted should be fixed in this version. Here is a short list:
ASR settings are deleted when turned off through normal application
configuration
Internet Explorer: Manage all Add-ons or Run without
permission triggers an ASR mitigation
App can't be deleted when advanced settings are shown
Does anyone know what other things are fixed and/or which new features are added which aren't listed on the Security Research & Defense Blog or the KB3015976 article?
W. Spu

I have a problem installing EMET 5.1. I get a message that the istaller is interupted. EMET 4.1 no problem.
After Windows updates today IE 11 did not work anymore and I got a message from EMET.
Deinstalling and IE worked again. Now I can only install 4.1
Did you execute the installer with "Run as administrator"? This issue was reported before. See also
Installer interrupted before EMET 5.0 could be installed. and
EMET 5.0 Installer "interrupted" and reverses
W. Spu

Similar Messages

  • Trying to update apps on iPhone keeps saying funds not available which there are. What's the minimum balance for free updates?

    Trying to update apps on iPhone keeps saying funds not available which there are. What's the minimum balance for free updates?

    Updates are free. Upgrades aren't.

  • When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

    When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
    Sincerely,
    Eric

    Run this when you have the problem and post the results here.
    EtreCheck
    This will tell us what is loaded

  • Printer HP ENVY 7640; which problems are equivalent to this Printer model?

    17th December 2014
    From Florianstor-4
    I'm a beginner. I d'ont now yet questions. I will send message later.
    Thanks.
    Ursula

    Hello Florianstor-4,
    Welcome to the HP Forums.
    Please feel free to write me back at any time with any questions or concerns you may have.  I am always happy to help.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Weblogic datasource - Created "1" resources for pool "DataSource", out of which "1" are available and "0" are unavailable.

    I am performing some transactions with java application deployed on weblogic. I faced some issue of getting the transaction response with some delay. I found these below mention messages logged into the managed server logs. 
    Following is my datasource settings
    Initial Capacity: 2
    Maximum Capacity: 100
    Capacity Increment: 20
    Anyone have idea why these following errors coming.
    ####<Nov 26, 2013 2:25:41 PM PKT> <Info> <Common> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '25' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <BEA1-1B6BE1217D118A188C49> <> <1385457941513> <BEA-000628> <Created "1" resources for pool "DataSource", out of which "1" are available and "0" are unavailable.>
    ####<Nov 26, 2013 2:25:42 PM PKT> <Info> <Common> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <BEA1-1B6EE1217D118A188C49> <> <1385457942413> <BEA-000628> <Created "1" resources for pool "DataSource", out of which "1" are available and "0" are unavailable.>
    ####<Nov 26, 2013 2:25:43 PM PKT> <Info> <Common> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <BEA1-1B71E1217D118A188C49> <> <1385457943792> <BEA-000628> <Created "1" resources for pool "DataSource", out of which "1" are available and "0" are unavailable.>
    ####<Nov 26, 2013 3:12:28 PM PKT> <Info> <JDBC> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1385460748433> <BEA-001128> <Connection for pool "DataSource" closed.>
    ####<Nov 26, 2013 3:12:28 PM PKT> <Info> <JDBC> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1385460748433> <BEA-001128> <Connection for pool "DataSource" closed.>
    ####<Nov 26, 2013 3:12:28 PM PKT> <Info> <JDBC> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1385460748433> <BEA-001128> <Connection for pool "DataSource" closed.>
    ####<Nov 26, 2013 3:12:28 PM PKT> <Info> <JDBC> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1385460748434> <BEA-001128> <Connection for pool "DataSource" closed.>

    i know this,
    The cause of the problem is: owing to the client's operations staff to modify the datasource ,and reployed
    thinks

  • Can I fit a 1TB HDD into a MacBook Pro 17" 2.4GHz which was released in mid 2007? There are 1TB HDD available but they are 12.5" high. Will they fit this model MacBook Pro?

    Can I fit a 1TB HDD into a MacBook Pro 17" 2.4GHz which was released in mid 2007? There are 1TB HDD available but they are 12.5" high. Will they fit this model MacBook Pro?

    Sorry, 12.5mm high not 12.5" high!
    Can I fit a 1TB HDD into a MacBook Pro 17" 2.4GHz which was released in mid 2007? There are 1TB HDD available but they are 12.5mm high. Will they fit this model MacBook Pro?

  • Which functionalities are available activating the EA-FIN extension?

    Hi All,
    cuold anyone tell me which functionalities are available activating the EA-FIN (Financials Extension) extension?
    and which ones are available activating the EA-FS (Financial Services) extension?
    Thanks
    G.

    hi
    check out the below link
    http://www.sapsolutionbrowser.com/Search.aspx

  • How to tell which maps are the latest?

    I have Maps v3.01 loaded on my 6710 Navigator (came with free worldwide licence) and Map Loader v3.0.28 on my PC.
    How do I tell which maps are loaded on my Nokia and what version/date the maps availalble on Map Loader are?
    Map Loader does not state which maps are already on my phone, nor does it state the date or version of the maps which can be uploaded.
    Obviously, I'd like to install newer versions of my country map if and when it is available, but how do I know which version is available and which I already have?
    Ovi.com does not seem to be the answer either as all maps were downloaded using Map Loader.
    Solved!
    Go to Solution.

    If you already have a free worldwide license and V 3.01 is working well for you then you are right to leave it for the moment. I hear of problems  searching for addresses etc with V3.03.  Can always update later when everything is sorted.
    I believe if you delete all your maps and then use Ovi Suite to download new maps, Ovi Suite will at least tell you what maps you have on your phone. I haven;t tried it myself because I can't stand Ovi Suite.
    Speed warning is available for Ireland but just like you I have to import the speed camera locations as landmarks. Hopefully, we will see these as new features in future updates.

  • Availability Check Problem

    Hello Folks
    I have a problem in availability check . When i raise a sale order for material A quantity 1500 and when i have 1000 quantity of material A in stock, there are two schedule lines, and on the order creation date there is 0 quantity confirmed even though 1000 quantity of Material A is available. Instead it creates a another schedule line where it confirms wholly the 1500 quantity.
    I have a necessity where i need to confirm 1000 material stock on the order creation date, and the rest 500should be confirmed on a later date. Have also checked with the config, i don't find anything wrong, Please advise me or guide me through how to handle this now !!
    Thanks in advance
    Cheers
    Vj

    Hi,
    1.If the material is already assigned to existing order, you can not assign it to other order.
    2.At the schedule line level, check item availability which will take u to availability overview screen..
    There selecet System Proposal push butto which will meet ur requirement..
    If u select one time push button, then you'll be getting only one schedule line with the 1000 qty.
    If u select full qty push button, then you'll be getting one schedule line with 1000 qty and remaining 500 qty will be in next schedule line date which can also meet ur req.
    If u select proposal, system will propose a date which will also meet ur req..
    Note that the material should be available at the time of availability check without getting assigned into any order..
    Make sure that the customer is allowing partial delivery..
    Hope it'll helpful..
    Thanks & Regards,
    Venkatesh.S.P.

  • How can I know which nodes are doing what?

    I have QMaster helping with a Compressor job, is there a way I can tell in the Batch Monitor (or maybe somewhere else) which nodes are working on the task?

    Thanks. Problem is that Apple Qadministrator tells me that information is not available for QuickClusters. Since I just let Qmaster sortof set itself up, that's what it is, a QuickCluster.

  • Which transitions are supported in Keynote iPad?

    I use some simple transitions in Keynote '09 on the Mac that work flawlessly. Usually dissolve, sometimes several on a single slide, and sometimes with grouped objects.
    It seems as if grouped object transitions on K-iPad is no good, and also seems as if more than one transition on a slide is a problem -- either doesn't work or is put in the wrong place.
    Is there a list of which transitions are supported, etc? I can't find it in the Apple support pages, but perhaps I'm not looking in the right place.

    Thanks Tom for the helpful article link. Though where would one find a list of the iPad availabe fonts...?
    From Apples own text...
    Use fonts common to both the Mac and iPad platforms. Fonts that are not available on the iPad are replaced with the Helvetica font.
    So does the iPad tell the user which fonts are "common" ???
    Thanks again.

  • My computer says I cannot use icloud because I have multiple versions of outlook installed. How do I find out which versions are installed and how do I decide which one to delete?

    My computer states that I have multiple versions of outlook installed and that i cannot use icloud. How d if find out which versions are installed and which ne to delete without interrupting the other?

    That's a Windows/Office problem. You should ask in the Microsoft support forums.

  • How can i determine which devices are used at the moment?

    Hi all,
    I am designing an interface with LabVIEW for uing agilent devices. My work colleagues will use this interface.  I want to determine which devices are used at the moment and if I determine used device, i will add automatically device names to interface's main vi. So all my work colleagues can see on the program which devices are used by another colleague. This devices are connected with GPIB. İ want to learn is there any function on Instrument I/O palette.
    Thanks,
    Omer
    Solved!
    Go to Solution.

    Hi Omer,
    so those devices are connected to the PC with a GPIB connection. Will your collegues run several DAQ programs at the same time?
    GPIB-devices being controlled by PC don't have a "in use"-signal. They wait for commands, execute them and send an answer. When you start to control them using two programs they may respond to both programs, mixing up settings/measurement values and so on.
    That being said: In MAX you can see all devices connected to your GPIB port. You could scan the GPIB port using VISA commands in your program. You might even try to access a certain device by it's VISA alias. I really don't know if you will get a "device nopt available" error message when that VISA alias is in use by a different program - but you might do a quick test on your own…
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • In I06, I have no way of knowing which songs are on my iphone 4s vs being stored in the cloud. There used to be a small cloud next to songs that were not downloaded. This was important to make sure I had the music I wanted when in an airplane.

    In the new i06 that I just loaded into my 4s, I have no way of knowing which songs are on my iphone vs stored in the cloud. There used to be a small cloud next to songs that were not on the phone. This is an important piece of information if you are a frequent traveller, as most of the flights I am on don't have onboard wifi, so it becomes a crap shoot as to what I will have available to listen to.
    Is there a way I can view what songs are actually stored locally?

    Go to Settings > Music and set "show all music" to OFF.

  • See which clips are already used in the sequence

    hi there,
    I am a complete newby for mac and fce
    I started a project for my dive video in the Filippines.
    I have like a 1000 clips in the browser.
    Is there a way in fce to see which clips are already use in the sequence and which are not?
    In pinacle studio they were marked with a red v

    This is a way to solve your problem.
    http://discussions.apple.com/thread.jspa?threadID=2283002&tstart=0

Maybe you are looking for

  • I have two accounts and want to merge them

    Somehow I managed to create two Apple ID's. This started even before I got a Mac but when I opened my iTunes account... Anyway, how do I merge them or do I have to figure out how to delete one profile? I'm only one person with one iPod and well, two

  • Can't see Time Capsule disk

    Hi there, need some help. I can no longer see my Time Capusle disk (and it's not performing back ups). I've just moved and set my time capsule back up as my wireless router last night. All seemed to be working fine. Came home from work today and coul

  • Outlook for Mac 2015 keeps crashing

    I installed the latest version of outlook for mac about 4 months ago and everything was working very well until yesterday when outlook started crashing. I've tried several fixes that I found in other MS postings like clearing the cache and preference

  • RFC_ERROR_SYSTEM_FAILURE: Error in ASSIGN: Memory protection error.

    HI, I need an urgent help in this error. I am getting this error, while i am trying to access the R3 from portal. i.e While saving the employee info. ESS -> PERSONAL INFO -> PROJECT EXP-> SAVE (dump) error msg in portal Error while saving: com.sap.mw

  • Find my iPhone in iCloud is not able to find my devices

    I have upgraded all my apple devices (including my iPad , iPhone to iOS 5 and my macbook air to 10.7.2) to the latest software. When I use find my iPhone feature in icloud.com its not able to find any of my devices. Is anyone else also facing the sam