EMIGALL Distributed Import Job for BP is getting cancelled in background

Hi,
When I'm restarting Distributed import and it's getting cancelled after some time with system error as "internal lock table overflow".
I checked SM12 (while job was running) it's  showing 14,000 - 15,000 locks on table BUT000, even though EMIGALL is not updating that table as it's rerun of the old job. (Old job been cancelled due to network issue.).
Can anybody please help me to understand why it's happening?
Thanks in advance,
Sagar

Hi Sagar,
I think I can explain what happened in your system:
During data migration the application encountered many errors and does not release the locks immediately. Remember: it is not the slave jobs that creates locks but the called application (through the service functio module). If the application enncounters an error (also when the business object cannot be locked due to a lock table overflow) it returns the error and the load program writes it to the error log. The saved error message is not always directly related to the lock table overflow situation. Often it is saying: object already locked by user xxx).
The master jobs uses also locks to block the configuration of its profile against concurrent access (exclusive access). If a user blocks the profile temporarily during an update of the profile, the master job waits until the update operation finishes. This last usually only very few ms. If the master encounteres a 'lock table overflow' situation it cancels - as designed be the developer.
The simple solution is that you should avoid a lock table overflow situation and/or that the lock table must not be too small.
Sagar,  I might also be that you find also the error 'lock table overflow' in the system log. Please check.
Kind regards,
Fritz

Similar Messages

  • I wander where to set import job for transports

    I wander where to set import job for transports to be imported automatically. On transport domain controller I can not manage other job than the one for the system itself.
    On the system which is not transport domain controler I have only display function

    are you asking for 'automatic import' in QAS/PRD ?
    When you go to STMS import queue in a particular system like QAS, there you can see a button 'import all'. This will enable to you schedule automatic import periodically in intervals for eg. 15 min or whatever you want.
    just click on import all and it will ask for inputs and schedule
    OR, do you want to confirm for RDDIMPDP job ?
    Run report RDDNEWPP to schedule RDDIMPDP
    Edit: Note 11677 - Transports with event-controlled RDDIMPDP

  • EMIGALL Distributed Schedule Job - Getting Error

    Currently I Placed migration formatted file and try to execute the "distributed
    import" i am getting error,"Object in import-file header does not
    correspond to the migration object". Same file i am able to execute
    thru REMIG_SPLIT_SUBMIT report successfully. I am having issues in
    Schudule job also. Is there any OSS note i need to apply.

    Srini,
    - The header information in the import file (1st data record) does not fit to the name of the selected migration company and migration object.
    - The REMIG_SPLIT_SUBMIT report works in a generic way and ignores the infomraiton in the header record.
    Kind regards,
    Fritz

  • Job SM:EXEC SERVICES  gets cancelled with  SYNTAX_ERROR

    Hi,
         The job which refreshes Service sessions (for Early Watch Alerts) in SolMan 4. gets cancelled with the message:
    Syntax error in program "RDSVASAEA_ROOT_____________050 ".
    I performed a syntax check on the program in the ABAP Editor and it gives the following result :
    Field "BDLDLTRHOSTS001030" is unknown. It is neither in one of the
    specified tables nor defined by a "DATA" statement. "DATA" statement.
    Can you let me know, how to solve this problem.
    My system is SolMan 4.0 SP 15 on Win 2003 with Oracle 10.2.
    ST-SER and ST-ICO are with the latest support pkg level,
    Regards,
    Anil.

    These steps can be done easier as of Support Package Stack 15:
    >
    Amit Devale wrote:
    > Step 1:
    > Run report BDL_DELETE_ALL_TABLES via SE38 to delete all entries
    > in the service definition tables
    >
    > Step 2:
    > Execute a 'Refresh service definitions' task session in transaction
    > SDCCN ->Task ->Create ->'Refresh service definitions'
    >
    > Step 3:
    > Execute in transaction SE37 the function module "BDL_GENERATE_LOGFUNC
    > _INCLUDES" and enter the value "ALL" in the 'OPTION' field.
    Hi Amit,
    Support Package Stack 15 of SAP Solution Manager does contain an update of SDCCN (shipped within ST-PI 2005_1_700 SP06.
    [SAP Note 727998|www.service.sap.com/sap/support/notes/727998]
    This offers an easy way to update the service definitions and to generate the logfunc Includes.
    Step 0: Ensure that optimizer statistics exist for table D010INC.
    Step 1-3 :You can use functionality in SDCCN to execute these steps.
    Perform:
    - Path: SDCCN -> Utilities -> Maintain Service Definitions
    - Select 'Delete and Replace Service Definitions -> Confirm this selection
    - Confirm that you want to delete the definitions
    - Confirm that a new task 'Service Definition  Refresh' was created
      (Take a note of the task id -> Review the log for this task id when it is completed)
    You should not not see any errors for either the update of a Service Definitions table or the generation of any re-import include.
    Best regards,
    Ruediger
    P.S.: Great, that you start to share your rich experience here in SDN.

  • Job getting cancelled in background scheduling

    Hi,
        I have written a report  in the SAP HR system and it is to be scheduled in background. This program transfers the PERNRs from HR system to CRM system as partners in BUT000.The report works perfectly fine if it is run in foreground. When I run it in background the job gets cancelled and I get the job log having a message that it could not ascertain code page and the system exception ERROR_MESSAGE is raised. If anybody has any clues regarding this problem please help me.
    Thanks & Regards,
    Rahul.

    Hi,
    I Guess you are using container controllers in the Report, and all container contols requires help from Sap Gui for execution. I guess that is the reason it is failing in background . Please check on that aspect as well.
    Hope this helps..

  • CHARM: schedule job for tansport of copies

    Hi Expert,
    I'm working with charm and it work fine but we have an extra effort in order to perform manually the import of transport of copies in the test system. Is It possible to schedule a specific job in the test system  that is able to timport ONLY the transport of copies?
    Thank in advance for your help.
    regards
    gio'

    Hello Jansi,
    I am looking for the same feature for UC's. Is there a way to schedule an import job for the transports of UC's on a hourly basis?
    Both the Maintenance Cycle and the Urgent Changes use differenct tasklist variants. The Urgent Change Tasklist Variant does not contain any jobs which can be scheduled.
    Can you please explain how I can make the Maintenance Ccycle import job pick up UC's?
    As you have mentioned I have executed the reports:
    /tmwflow/scma_btch_sync_uc
    /tmwflow/scma_btch_sync_test
    But my hourly report /TMWFLOW/SCMA_TRORDER_IMPORT is only looking for Maintenance Cycle transport and does nothing with UC's.
    Please advise.
    Thanks in advance.
    Kind regards,
    Wouter Huiberts

  • Job getting cancelled

    Hi All,,
    We have a job" UPC_BUNDLE_EXECUTE" which is getting cancelled everyday
    here ar
    Job started
    Step 001 started (program UPC_BUNDLE_EXECUTE, variant &0000000000000, user ID )
    Global planning sequence was terminated with errors
    Job cancelled after system exception ERROR_MESSAGE

    Hi,
    I have already checked... but no dumps exits..
    but this job is getting cancelled daily...
    can anybody throw a light on this...
    appreciate your guidance
    Regds

  • Export getting cancelled

    Hi all,
    Im working in  ECC 6.0 system. While transporting the development request to Quality server using Transport of copies,
    the export  gets cancelled. The target system is configured as dummy.
    I did the following things :-
    1. Checked the transport log : It is not showing any errors
    2. Checked the bacground job RDDFDBCK : The status is Finished but when I checked the Job Log there was an Information message 'Transport control program tp ended with error code 0016'.
    What could be the reason for the export getting cancelled?
    Regards,
    Ramya Iyer

    Hi all,
    The problem was because of insufficient space in the /usr/sap/trans folder.
    Resolved the issue by creating the required space in it.
    Regards,
    Ramya

  • 'Data for last import/Statistics' tab missing for Distributed imports in EMIGALL

    Hi experts,
    For some reason when I initiate Distributed loads using 'Distributed imports' in EMIGALL, I do not get the third and fourth tabs viz. 'Data for last import' and 'Statistics for import runs' after the loads are triggered. Is there a specific Note that needs to be applied. I checked Notes like 1179843, 780996 however they were relevant for previous releases and I am currently on release 605. Any insights to this problem?
    Thanks,
    Caroline.

    SharedObjects does the trick nicely!

  • When I hit the import button for a new project I get an internal error message stating: Could not find namespace: AgCreativeCloudUtils

    When I hit the import button for a new project I get an internal error message stating: Could not find namespace: AgCreativeCloudUtils
    Can someone help me with this issue please? Tks

    https://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…

  • I recently had the genius bar change my imac hard drive because it crashed. For some reason Time Machine didn't back up some of my important files. Can I get my damaged hard drive back from the genius bar to see if I can access that info?

    I recently had the genius bar change my imac hard drive because it crashed. For some reason Time Machine didn't back up some of my important files. Can I get my damaged hard drive back from the genius bar to see if I can access that info?

    Unfortunately, that drive is long gone, probably back to the mfr. Drives are not returned when they are exchanged. You can go by and ask them, but the chances are slim to none.

  • Iphoto has been importing photos for over an hour and i can't get it to stop. can't stop importing and can't shut down computer.

    iphoto has been importing photos for over n hour and I can't get it to stop.  Can't get out of iphoto and can't shut down computer.

    iPhoto works best when the source (Pictures folder) is on a different disk drive than the iPhoto Library is on.
    And you need to have enough free disk space to work with, the faster the better.
    Also, do not keep your media folders and those in your home folder on the same drive as the system, also another bottleneck.
    Until or unless you have everything on 1400MB/sec SSD PCIe controller, you want
    System boot drive
    Media and data folders and such
    scratch
    backup
    etc
    I put iPhoto on an SSD off an SSD PCIe Sonnet Tempo card
    If you stop- it, you will need to trash the Library it was creating.
    Reading and writing to/from the same hard drive will be slow.
    You don't mention which Mac, or how large you are trying to import etc
    Also the support page and link to the iPhoto Commuinity is off this page:
    http://www.apple.com/support/iphoto
    Take a look in Activity Monitor. See what the % being used for iPhoto, how many pageouts, how much free space on the various disk drives, and how much RAM do you have installed?
    http://support.apple.com/kb/HT1342

  • I downloaded Adobe immigration software for Aperture, opened Lightroom, but the Aperture library was grayed out so it couldn't be selected to import. How do I get it to work? I only have a few days left on the test version of Lightroom to see how it works

    I downloaded Adobe immigration software for Aperture, opened Lightroom, but the Aperture library was grayed out so it couldn't be selected to import. How do I get it to work? I only have a few days left on the test version of Lightroom to see how it works with my Aperture library.

    Gracias photo-enthusiast por tu respuesta pero hay docenas de de usuarios que tienen esta mismo problema, me da la sensación que nos tomas por gagas que no tenemos ni idea de lo que tenemos entre manos.
    Me alegro enormemente que no hayas tenido tu este problema.

  • HT201250 My time machine back up does not appear to back up documents and e mails (the most important things for me). How do I get this done?

    My time machine back up does not appear to back up documents and e mails (the most important things for me). How do I get this done?

    How do you know it's not backing up those things? To check documents, go in the Finder to your documents folder, then go to the Time Machine icon in your menubar and click Enter Time Machine. Scroll back through time and see if previous versions of the documents exist in the backups.
    For Mail, same thing. Open the Mail app, go into Time Machine in the same way, and scroll back. Your inbox should change to reflect how it looked when it was backed up.
    Matt

  • Job gets cancelled - Plan version cannot be planned for fiscal year

    hello,
    In R/3, I am trying to delete data using KEPM TCODEand the job gets cancelled with message "Plan version cannot be planned for fiscal year".
    Does anyone know what I should do to resolve it.
    thanks,
    Bhat

    Hello,
    Thanks for your response.
    I have checked OKEQ and
    we have entries for fiscal year planning version and in operating concern the version is locked. I don't know if I should unlock the version and what will be the impact.
    thanks,
    Bhat

Maybe you are looking for