Empname in Arabic not getting printed correctly in smartform

Dear friends,
          I have developed smartfomr and iam able to print all the data correctly,However i hve to get the Empname in english and Arabic. When iam printing the English is correctly gets but Arabic is getting printed wrongly.
Eg : David Harry -
> correctly printed in English
       yrraH David(as i dont know arabic iam writing in in english only  how it is coming in arabic after checking with my user) --- some thing like this is getting pritned in Arabic which is totall wrong.
However when i login in Arabic the name is getting priented correctly but the English is getting wrongly  i.e Vice versa case.
Is there any chance how i can i login in English and getting the Arabic Name also printed correctly . Please could anyone help me in this  regard.
Regards
Divya.
Edited by: Divya Kumari on Jul 24, 2011 6:23 PM

Well, what was the solution?

Similar Messages

  • Barcode is not getting printed in the SmartForm

    Hi All,
    I am trying to print BARCODE in a SMARTFORM but it is not getting printed.
    I have created a barcode ZTest_Barcode from the transaction SE73. Then I have created a Character Format C1 with this barcode ZTest_Barcode.
    In the SmartForm I have applied this character format like this <C1>&WA_VBAK-VBELN&</C1>.
    But in the preview of this SmartForm barcode is not getting printed while this field is printing like <C1>220<C1>.
    I have also tried with some SAP barcodes like BC_CD39, C128A_01, etc. But the result is same.
    Please help me to resolve this issue.
    Regards,
    Avaneet

    hi avaneet,
    check this site for barcode.
    http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
    it may help you.
    thanks
    Sachin

  • Arabic data not getting printed correctly

    Dear Freinds,
               I have developed a smartform where in i have to print the English Name and Arabic name one below the other .
    So to ge the ARabic letters to be get printerd i have used the Device type ARSWIN,
    i can see now the data  being displayed correctly for Arabic name in PRINT PREVIEW ,however when i take printout of the same in the printer which is assigned to my system i can see that the data is getting jumbled on the printed stationery and i can very cleary see that data which is there on Print preview is different to that printed matter , so i have checked with my Arabic collegue and he said  after reading the print preview that it is getting displayed correctly but the data in the printed output paper is not correct  .
    So  I really not able to figure out why it is displaying correctly in Print Preview and not getting this printed  on the printed stationery .  Could any one please help me out what i should do in gettign the data also correctly in the Printed data on the Stationary paper.
    Thanks & Regards
    Divya.
    Edited by: Divya Kumari on Oct 3, 2011 7:48 AM
    Moderator Message: Moved to right forum.
    Edited by: kishan P on Oct 3, 2011 11:24 AM

    Hi,
    Now i understood your problem.
    I think you are using Text Elements to print Arabic Text.
    Use Include Text instead of Text Elements.
    By using So10 you can create Standard Texts.
    Note: Create these standard texts under language key "AR".
    Hope it solve your problem.
    Regards,
    Suresh
    Edited by: suresh kumar on Oct 16, 2011 6:33 PM

  • Invoice is not getting printed for particular 3 customers

    Hi,
    When user is printing the Invoices, only for specific 3 customers it is it not getting printed automatically, but the output is shows success with green. When they re process it manually, it is printing successfully for the same printer.
    1. Printer setup is checked it is correct
    2. There are two outputs one is External send (E-mail) and one is Printout.
    3. The problem is with only the Printout, where as the external send (E-mail) is sent successfully.
    Help me out in this issue...
    Thanks
    BP

    Hi
    First of all Welcome to SCN Forum
    Please check wheather any subroutine has been assigned to the output type access sequence.If the problem is with printout only then check the Logical destination that has been maintained in VV32 for those 3 customers.In VV32 for those 3 customers check wheather Release Immediately has been checked or not. Before reprocessing it go to VF02 and check on determine analysis
    Regards
    Srinath

  • Not getting print out of PO

    Dear all,
                 I am not getting print out of PO. In the message out put, the config ( NACE , MN04 ) and as well as all setting are correct. in FURTHER DATA tab, the despatch option id 4 : Send immediately ( when saving the application) ; but it is not generating any spool request for print out. i have checked in SP01 and SP02 , but I could not find out any spool request. More interesting, with the existing config and message setting , we were getting print out till one day ago but presently it is not working.
                  Hoping for corrective solution.
    Regards,
    Partha

    Hi,
    check t.code SPAD and involve Basis Consultant.
    Also check NACE t.code for Program, std form,routine, medium
    Note:
    Customisation steps for Output of Purchase Order
    1. Condition Table
    SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select:
    Purchasing Doc. Type,
    Purch. Organization,
    Vendor
    2. Access Sequences
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
    4. Message Determination Schemas
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
    Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
    Regards,
    Biju K

  • Script 2nd page-data not getting printed

    Hi Folks,
    I have a script which is related to TDS Certificate.The problem is I am having all the data in the table that is used to print the data but I am not getting only the tabular column i.e contigious data printed for the next page.The rest all getting printed correctly.
    To be clear
    first page is having
    index,belnr,total amount,educess,sur charge etc.
    1/10100/22.00/33.00/44.00/77.00
    in the second page again it should print again
    index belnr total etc but it is not getting printed.
    blank
    But the final  table is having 2 belnrs data.Where I am going wrong?
    Thanks,
    K.Kiran.

    Hi,
    During test print, you cannot see the second page.
    The second page will be visible only when there is data flow from page 1 to page 2.
    Execute with actual data and check if it flows through to page 2.
    Also Please try this:
    After your first page, include this:
    CALL FUNCTION 'CONTROL_FORM'
    EXPORTING
    command = 'NEW-PAGE'.
    and then call the the write form with text element in second page,
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    element = 'PG2'
    window = 'INV'
    EXCEPTIONS
    element = 1
    function = 2
    type = 3
    unopened = 4
    unstarted = 5
    window = 6
    bad_pageformat_for_print = 7
    OTHERS = 8.
    Reward points if found helpful…..
    Cheers,
    Chandra Sekhar.

  • Text overflown is not getting printed in the next page in ADOBE

    Hi Experts,
    I have a text field, where the users can enter the comments. In this text field if the user enters more than a page, a scroll bar appears in the print preview where the users can view the complete text what they have entered, but while printing the text which exceeds more than a page is not getting printed in the next page.
    I have set the subform properties as "Flowed" and the check box "Allow Page Break within content" is also been enabled, but still the extra contents is not getting printed in the next page.
    Please help me regarding this.
    Thanks & Regards,
    Karthik MD

    Hi Lohitha,
    Even "Expand to fit" is been enabled.
    Thanks & Regards,
    Karthik MD

  • Text overflown in the first page is not getting printed in the next page

    Hi Experts,
    I have a text field, where the users can enter the comments. In this text field if the user enters more than a page, a scroll bar appears in the print preview where the users can view the complete text what they have entered, but while printing the text which exceeds more than a page is not getting printed in the next page.
    I have set the subform properties as "Flowed" and the check box "Allow Page Break within content" is also been enabled, but still the extra contents is not getting printed in the next page.
    Please help me regarding this.
    Thanks & Regards,
    Karthik MD

    Hi,
    This issue is in ADOBE, I think there is no concept of Window in ADOBE,
    The text box is placed inside a Subform.

  • APEX4.0.2 - Interactive Report total is not getting printed when downloaded

    I've an Interactive Report based on a sql in Apex 4.0.2. There is a Balance column whose total sum is displayed at the bottom of the table.
    When I download the report, the total sum of balance column is not getting printed in the bottom of the report.
    Could this be a bug or have I missed some setting?
    Thank you for the help.

    Hi,
    Whilst you can update the SQL to include totals, these would probably not be effective if the user filters the data (the total row may be filtered out) or sorts columns (as the total row would likely be sorted as normal data).
    Unless someone else has any other ideas on this, this may be something that needs to be logged with the Apex team as an enhancement request - create a new thread and start the Subject as "Enhancement Request:"
    Andy

  • Vendor Address not getting printed properly in cheque printing.

    Hi
    While printing the vendor address for the cheque printing, for certain vendors the street no. is not getting printed & for certain vendors PO Box is not getting printed.
    In the program we are fetching vendor address from REGUH table & then passing onto the global variables which are being used in the script & data is there in the database table for both street & PO Box number.
    The code in the script is as follows:
    /:           ADDRESS PARAGRAPH UH TYPE '3'
    /:             TITLE    &W_ANRED&
    /:             NAME     &W_ZNAME1&,&W_ZNAME2&,&W_ZNAME3&,&W_ZNAME4&
    /:             STREET   &W_ZSTRA&
    /:             POBOX    &W_ZPFAC& CODE &W_ZPST2& CITY &W_ZPFOR&
    /:             POSTCODE &W_ZPSTL&
    /:             CITY     &W_ZORT1(28)&
    /:             COUNTRY  &W_ZLAND&
    /:             FROMCOUNTRY &W_LAND1&
    /:             ADDRESSNUMBER &W_ZADNR&
    /:           ENDADDRESS       
    Can anyone please let me know, what could be the possible reason for this?

    you can tyr with TYPE '1' or TYPE '2'
    : ADDRESS PARAGRAPH UH TYPE '3'

  • GLPCA table not getting updated correctly for VBUND

    Hi All,
    I have come across one issue that the value of trading partner field (VBUND) in table GLPCA are not getting updated correctly for document type KP.
    In vendor master this field has different value versus it is showing in GLPCA-VBUND.
    Does any one knows about ?
    Thanks for your help on it.
    Regards,
    Manoj

    Hi Sridhar,
    Thanks for your response on it.
    This note is not applicable for our system as we are working on 4.0B with support pack 52.
    Also we are getting this worng update of this field (GLPCA-VBUND) while doing MR11 creating document with doc. type KP. This value is not picking from vendor master (LAF1-VBUND) and randamly picking any value. Not sure from where ?
    Please advise your thought.
    Thanks,
    Manoj

  • Excel Charts do not get displayed correctly (colour) !urgent!

    Hi,
    believe me: I spent days in research to fix my problem but could not find a solution yet...
    I use a lot of Excel Web Parts on my SharePoint Site. Basically to display charts or tables. Everything worked fine for months but out of a sudden some of the web parts do not anymore. These Web Parts still get displayed but all in black or grey and
    because of that are partly unreadable. For example: a cell with a white font and a blue blackground just gets displayed as a black cell with black fontcolour. I thought it might depends on the settings of the server computer but other colourful charts/tables
    still work fine (but on the other hand, all new web parts do not get displayed correctly...)
    I tried to remove macros, conditional formatting, creating completely new subsites with content. But the result is always the same: black cells.
    Then I tried to just use 8bit-colours and tada: it worked (except of the colour white, that still does not work).. I do not have access to the server computer. And I am wondering because some other charts still work..
    Any ideas?
    I do not use SharePoint Designer, just the browser version of 2010.
    Thanks for your help!!!

    Here is the code:
    IANode QueryContractResultNode = wdContext.nodeA();
    IBNode ToolTipNode = wdContext.nodeToolTipNode();
    QueryContractResultNode.invalidate();
    for(int i=0; i<searchContractListSize; i++)
       IAElement newQueryContractResultEl =   QueryContractResultNode.createAElement();
    WDCopyService.copyCorresponding(getList.getOutput().getI_Detail().get(i),newQueryContractResultEl);
    IBElement newToolTipEl = ToolTipNode.createBElement();
    if(newQueryContractResultEl.getParentName().length() >= 5)
         newToolTipEl.setChildName  (newQueryContractResultEl.getParentName().substring(0,4) + "...");
    else
         newToolTipEl.setChildName (newQueryContractResultEl.getParentName());
    QueryContractResultNode.addElement(newQueryContractResultEl);
    ToolTipNode.addElement(newToolTipEl);
    Node A is bound to a model structure.  Therefore, the value of A.parentName is set after the RFC execution.
    Zita

  • Barcode not getting printed from web dynpro

    Hi,
    We have a smnart form with bar code. When we test it from GUI, it is diplaying the bar code and also printing the bar code successfully.
    However when we show the same smart form in webd ynpro as PDF,  Bar code is getting displayed but when we print the form, bar code is not getting printed.
    Are there some settings for this?
    Regards,
    Madhu

    https://discussions.apple.com/message/23759716?ac_cid=tw123456#23759716

  • Not getting print preview

    Hi,
    i'm not getting print preview screen when using a standard print program with a smart form.
    i cant change the print program..is there any other way?

    hi
    check for these options
    DATA:     gs_control          TYPE ssfctrlop,
              gs_output_options   TYPE ssfcompop,
      'X' TO gs_control-no_dialog,
      'X' TO gs_control-getotf,
      'PRINTER' TO gs_control-device,
      'LOCL'(047) TO gs_output_options-tddest.
    if there is osme table controlling the flow disable that or u may remove it from calling program
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname           = 'ZLB_BIL_INVOICE'
        IMPORTING
          fm_name            = lv_fnam
        EXCEPTIONS
          no_form            = 1
          no_function_module = 2
          OTHERS             = 3.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      CALL FUNCTION lv_fnam
        EXPORTING
          control_parameters = gs_control          * "" Disable these two options*
          output_options     = gs_output_options  * "" same here*
          user_settings      = space
          is_bil_invoice     = lv_bill_invoice
          is_nast            = lv_nast
          is_repeat          = space
        IMPORTING
          job_output_info    = gs_job_output_info
        EXCEPTIONS
          formatting_error   = 1
          internal_error     = 2
          send_error         = 3
          user_canceled      = 4
          OTHERS             = 5.
      IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    shiva

  • Not getting the correct data at reciever side

    Hi
    I have done mail adapter... My senario is Mail --> XI --> File... In this mail adapter is sender. i have give the url as pop://<ip address> the xi server is picking up the file...
    Source File Is:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:Mail_Message_Type xmlns:ns0="http://mailtofiledemo.com/ravi">
       <Order>
          <Header>
             <Name>Ravi</Name>
             <Address>Vsp</Address>
          </Header>
          <Item>
             <material>Computer</material>
             <units>3</units>
             <price>90000</price>
          </Item>
       </Order>
    </ns0:Mail_Message_Type>
    Target File is:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:File_Message_Type mlns:ns0="http://mailtofiledemo.com/ravi">
    <row>
       <name>Ravi</name>
       <address>Vsp</address>
       <material>Computer</material>
       <units>3</units>
       <price>90000</price>
    </row>
    I have  an unread mail in my Inbox and i have attached the source file to that mail... the server is picking up the file but in receiving side i am not getting the correct target file... i am getting the target file like:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:File_Message_Type xmlns:ns0="http://mailtofiledemo.com/ravi"></ns0:File_Message_Type>
    </ns0:File_Message_Type>
    eventhough if i dont have any unread mails in my inbox i am getting the same file at target side continuosly...so please give me the solution as early as possbile or else my folder will going to be overflow with that target file
    Thanks & Regards
    Ravi Shankar

    Ravi,
    Have to check the Transport Protocol used by internal Mail Server. The parametes you pass to the mail adapter should be same to the internal mail sever where you are trying to send and also check with XIPAYLOAD option.
    If this helps to u. Allot the points please.
    Thanks
    Gowri K

Maybe you are looking for