Empty-Message Handling is not working in receievr File Adapter

Hi All,
I have selected "Empty-Message Handling" = 'Ignore'in Receiver File adapter, but still empty files are creating in target directory.
Message mapping generates output based on the conditon, if the condition is 'false' mapping will generate empty file (no data is being mapped).
Why Receiver file adapter is processing empty fiels even i set 'ignore' empty fiels in configuration (ID)?
Hoe can i manage not to place empty fiels in target directory?
File type is '.txt'
Your help would be appreiciated greatly.
Thanks,
Rajesh

Not sure why is it not working. Make sure the channel is activated and cache is refreshed properly. But as a workaround you may use OS script checking for size of message and deleting it or configure a BPM to avoid the file creation. Or else an adapter module as shown
/people/gowtham.kuchipudi2/blog/2006/01/13/stop-creation-of-an-empty-file-from-file-adapter-using-module
Regards,
Prateek

Similar Messages

  • Receiver file adapter creates empty files, Empty-Message Handling SP19

    Hello,
    We have just upgraded the system to SP19.
    One of the new features is that it should be possible to determine how XI messages with an empty main payload are to be handled in the receiver file adapter.
    If the parameter Empty-Message Handling is set to 'Ignore' no file should be created if the main payload is empty. In our case an empty file (size 0 kb) is still created even though the main payload is empty and the flag is set to 'Ignore'.
    Has anybody experienced the same problem?
    //  Best regards  Hans

    This should work:
    Use your own adapter module that parses incoming message and checks if it has any record sets in the document. If it does not have any record sets, then set the message to empty and then give this modified message to File receiver.
    For example, see the example code below:
    Module imports..
    Audit log import..
    DOM imports/SAX imports..
    public ModuleData process(ModuleContext moduleContext, ModuleData inputModuleData) throws ModuleException {
              try {
                   // get the XI message from the environment
                   Message msg = (Message) inputModuleData.getPrincipalData();
                   AuditMessageKey amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.INBOUND);
                   Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"RemoveRootTag: Module called");
                   XMLPayload payLoad = msg.getDocument();
                   Document doc = parseXmlFile(payLoad.getInputStream());
                   if(doc != null){
                        if(!doc.getDocumentElement().hasChildNodes()){
                             Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS, "Document is empty!!");
                             payLoad.setContent("".getBytes());
                             msg.setDocument(payLoad);
                   // provide the XI message for returning
                   inputModuleData.setPrincipalData(msg);
                   } catch (Exception e) {
                   // raise exception, when an error occurred
                   ModuleException me = new ModuleException(e);
                   throw me;
                   // return XI message
              return inputModuleData;
         private Document parseXmlFile(InputStream xmlpayload) {
              try {
                   DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
                   factory.setValidating(false);
                   //        Create the builder and parse the file
                   Document doc = factory.newDocumentBuilder().parse(xmlpayload);
                   return doc;
              } catch (SAXException e) {
              } catch (ParserConfigurationException e) {
              } catch(IOException e){
              return null;

  • Receiver File adapter - 'Empty Message Handling' option to ignore not worki

    Hi,
      I am trying to create the Files in receiver based on condition.But I am gettiung error in communication channel when there is no payload. Receiver I am usuing FCC and processing tab I selected -'Empty Message Handling' option to ignore .
    one source -> Target 1 (0..1 occurance in signature tab changed, message mapping and operation mapping)
                 and Target 2 (0..1 occurance in signature tab changed)
    and I put the message type level condition. While creating first message If did not create the Message type in my maaping still my Receiver File communication channel is giving error. even thow I my receiver interface occurance is 0..1
    Right now I am in PI7.1 and SP7 is the bug for support pack do I am missing any thing. and do I need to upgrade any nwe patch. appreciate your help.
    Regards,
    Venu.

    Hi,
    here is the my requirment one source -> two target interfacess (0..1)
    If u have 2 target interfaces,then this is not suffice..... u should make it as 0..unbounded both in operation mapping and message mapping.
    But based on ur requirements posted above i guess u have only one inbound interface at a time based on some conditions....
    But,
    <messages>
    <messages1>
    based on condition first message type not created in mapping.
    <messgaes2>
    The error u r getting is because.... u want only one interface in target at a time....
    Then u should not generate Message1 also in the target.
    So avoid mapping to message1 if u want only message2.
    If both message1 and message2 are created in target means... it is triggering for two interfaces.... so avoid one message1 or message2... based on some conditions u have..
    Still nt solved do post...
    Babu

  • Text messages ringtones are not working in the Storm Two

    Device:  Storm Two running OS version 5.0.0.713 on the Verizon Wireless network.
    Recently, I upgraded from a Storm One to a Storm Two because of a multitude of issues with the Storm One; not enough memory, constant lock-ups; dropped calls, etc.  On the Storm One I had customer ringtones for contacts; so when a contact calls me the phone will sound a specific ringtone for that contact; the same for text messages from that contact. Now that I have the Storm Two the text message tones for the contacts are not working. In fact, even when I select a ringtone for text messages for a contact the phone will ring the generic ringtone that comes with the phone. If I go into the sound profile and change the generic ringtone to one of my own and the contact sends me a text/sms message the phone will ring the ringtone that I selected in the profile that is being used at the time. This is not the way it worked on the Storm One.  On the Storm One; if I have a specific ringtone for the contact and that contact sends me a text message it will sound the text messages tone for that contact. These ringtones have worked for previous devices including my Treo and Palm devices. The ringtone files worked well in the previous Storm One.
    So to make a long story short; I want to know why my text message ringtones are not working as designed/setup-up. If a contact calls me the phone will sound the ringtone for that contact; but if that same contact text me it will not ring the ringtone for the contact. This is annoying and I am at my wits end trying to find out why this is not working.
    Vernon

    Hi Jain....
    Field separator is for separating the fields.That means it will effect every field in the node.
    But end separator is not like that.It will apply at the end ofall fields of a node.It will effect node not a field.
    according to ur scenario if u use data.endseparator 'nl',output will come like this
    2008/0701$101
    2008/0701$102
    2008/0701$103
    2008/0702$105
    if u want new line for every field try to insert a separate node for second field.That means
    MT_DATATYPE:
    Data -
    1:UnBounded
    . .OrderDate----
    1:1
       <Data2>                   1:1
    . ....OrderNo -
    1:1
    now give data.endseparator  'nl'
                data2.endseparator 'nl'
    if possible try like this....
    Sreedhar Goud L

  • Why is my text messaging app is not working at all, is a blank screen? Help!!!

    My text messaging app is not working at all is a blank screen when I open it! Help!!!

    Abdussalam.A,
    you mentioned that Terminal does not work at all for your MacBook Pro. What currently happens when you run Terminal? In what way does it not work?

  • Itunes not working, get "missing file, reinstall itunes" message.

    1.  Itunes not working, get "missing file, reinstall itunes", message.
    2.  When try to reinstall itunes, gets as far as "starting services", then stops with message, "Apple mobile device failed to start. Verify that you have sufficient privileges to start system services."
    I am logged in to my laptop as Administrator.
    3.  After selecting "retry" and "ignore" a few times, install went ahead and got "Congrats, you have successfully installed itunes"
    When I went to itunes I got, " Itunes not installed correctly, please reinstall. Error7 (Windows error 126)".
    4. On reinstalling itunes yet again, got, "Programme cannot start because MSVCR80.dll is missing. Try to reinstall programme"
    Help !!!

    See if this post from turingtest2 helps : https://discussions.apple.com/message/24620553#24620553
    There is also this user-tip for troubleshooting issues with iTunes for Windows from turingtest2 : https://discussions.apple.com/docs/DOC-6562

  • I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

    I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

    Hi Hardy Tasso,
    Are you seeing this problem since first launch of PSE13 after installation or recently?
    Please try:
    Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
    Thanks,
    Anwesha

  • Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file bu

    Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file but not working. What is the matter and how can I deal with it?

    I am trying it on Adobe Acrobat Reader 9.2.1. Tried to fix Hex code, and also tried 'edit-preference-trust manager'. I focusing on Adobe registries but still couldn't fix the problem.

  • My text messaging app is not working PLEASE HELP!!!

    My text messaging app is not working at all is a blank screen when I open it! Help!!!

    No its a well known bug with iphones caused by their over complication of things and their complacency that their users will buy the phones on looks alone irrespective of its basic functionality.
    Suggestion 1 - The most common suggested solution seems to be: iMessage needs switched off on all your devices and switched back on after a rest. I found that this did NOT work.
    Suggestion 2 - Having a Wi Fi Signal seems to confuse iMessage to send an SMS as a text or as an iMessage. Turn off WiFi on your phone and manually send as text message. Slow, I lnow!!
    Suggestion 3 - Move away from any wifi source ie out of range.
    Suggestion 4 - Send an email, or a letter. Its more personal!!
    20 Minutes later - still not sent 2 short texts.
    Apple are very complacent and disdainful of their user community. Not what Id expect but this is a global corporation with the same business ethics as an Oil company or a car company. Profit not function.

  • Recevier adapter empty message-handling ignore

    Hi all,
    I configured file receiver adapter with file content conversion (comma separated).
    In processing parameters Empty-message handling is set to Ignore.
    Payload that is in message generated from SAP is:
      <?xml version="1.0" encoding="utf-8" ?>
         <mt_ap_invoice xmlns:prx="urn:sap.com:proxy:DES:/1SAI/TAS128FC2C2C3C8E901DC22:700:20 08/06/25" />
    There are no any data that is filling structure (structure main node is defined as 0...unbounded) and still empty file with 0 bytes is created.
    Please can you tell what is wrong in this setup as In case of empty message I don't want that file is generated?
    Regards,
    Nenad

    - open Integration Builder
    - open your file receiver adapter
    - go to tab Processing
    - change Empty Message-Handling to 'Ignore'
    Cheers,
    André

  • Empty Message Handling with Receiver File adapter

    Hi,
         We were using the "Empty-Message-Handling" (status set to Ignore) of Receiver file adapter to stop a 0 KB file from being written to the specified directory.
    However, inspite of this, a 0KB file continues to be written.
    The specifications are given below-
    File Construction Mode - Add Time Stamp
    Put File - Directly
    Empty Message Handling - Ignore
    Maximum Concurrency - 1
    File Type - Binary
    Can anyone please help with this.
    Thanks and Regards,
    Shiladitya

    HI,
    In one of thread the same problem was coming. Just look at the thread.
    Receiver file adapter creates empty files, Empty-Message Handling SP19
    Or
    Follow the weblog for the same requirement.
    /people/gowtham.kuchipudi2/blog/2006/01/13/stop-creation-of-an-empty-file-from-file-adapter-using-module
    Thnx
    Chirag
    Reward points if it helps.

  • HT201412 Message tones is not working sometimes

    1.My iPhone 5 message tones is not working sometimes suddenly, have to restart device or eventhought sometimes is not working too after restart my device. I have to reset my iPhone n restore again .
    2.Restore with iOS is not as good as last time coz I can't get back all my iOS photo stream photos n all the photo in my albums too. This is ***** n takes few days also not complete download all of my photos.
    3.some of my iPhone apps will suddenly not respond or will log out to home screen suddenly . Have to open the apps few times only its working as normal .

    Hi,
    I have nothing found regarding your issue. But maybe a look at SAP note 638058 will give you a hint.
    Regards,
    Klaus

  • Message.saver is not working under 10.6 - anybody know of an alternative?

    Message.saver 1.5.2 (http://www.apple.com/downloads/macosx/icons_screensavers/message.html ) is not working under 10.6. It is a screensaver that allows you to put a text on the screen as the saver kicks in. IMHO a excellent piece of software that worked fine under 10.5 but not under 10.6.
    Does anybody know if there is something like it? and that works under 10.6?
    Thanks.

    Hi
    i have the same messages on 10.6.4 and with the sonic xx170:
    28.06.10 11:39:04 racoon[489] IKE Packet: transmit success. (Phase2 Retransmit).
    28.06.10 11:39:07 racoon[489] IKE Packet: transmit success. (Phase2 Retransmit).
    28.06.10 11:39:08 racoon[489] IKE Packet: receive success. (Information message).
    28.06.10 11:39:10 pppd[488] IPSec connection failed
    28.06.10 11:39:10 racoon[489] IKE Packet: transmit success. (Information message).
    28.06.10 11:39:10 racoon[489] IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA).
    any ideas?
    waiting on 10.6.5, 10.6.6 ....?
    regards, Arthur

  • Everytime i close firefox, i get an error message about quicktime not working. 6 times.

    browsing normally, close firefox, i get an error message about quicktime not working. i click ok. then another comes up. i click ok. 6 times total this error message comes up, every time i close firefox. really annoying.

    If there are problems with updating or with the permissions then best is to download the full version and trash the currently installed version to do a clean install of the new version.
    *Trash the current Firefox application (open the Applications folder in the Finder and drag the Firefox application to the Trash) to do a clean (re)install
    *Install the new version that you have downloaded
    * http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
    Your personal data is stored elsewhere in the Firefox profile folder, so you won't lose your bookmarks and other personal data when you uninstall and (re)install Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    You can also try to repair the disk permissions:
    *http://thexlab.com/faqs/repairprocess.html

  • Yahoo mail message editor is not working in Firefox 3.6.9

    Hi
    Yahoo! main message editor is not working in latest firefox release 3.6.9
    I am unable to type any text in message body.

    Try changing privacy.clearonshutdown.history to false

Maybe you are looking for