Enable to display tray in Iview

Hi
I have added an iview to Portal under a Role.
But when I click on that Iview i am unable to see the Tray as it is not getting displayed because of which i am not able to personalize my iview at runtime........
When I added same Iview in a page and then added this page in a role.
The tray is getting displayed. It might be because it is getting displayed for that page !!
Please tell me how can i get that tray displayed if i am adding that iview directly to role.

Hi
I myself hovered around this problem by trying all ifs and buts...
results are :
Show Tray (Page) - Yes
Shaow Tray (Iview) - Yes
(Tray displayed)
Show Tray (Page) - Yes
Shaow Tray (Iview) - No
(Tray does not get displayed)
Show Tray (Page) - No
Shaow Tray (Iview) - Yes
(Tray displayed)
Show Tray (Page) - No
Shaow Tray (Iview) - No
(Tray does not get displayed)
which means it is iview property which decides wether tray is to be displayed for a particular iview or not.
When that iview is added to page only then tray will be displayed........
Edited by: Saurabh Agarwal on Nov 25, 2008 10:52 AM

Similar Messages

  • Can i display My application iview and transaction iview in single page ?

    Hi,
    I am new in web dynpro and portal. i am doing one approval application through web dynpro. Now i need to attache sap inbox to application. For that some budy suggested me about transaction view. So my questions are as folloes.
    1.> How i attached my application to iview ?
    2.> How i created Transaction  iview ?
    3.> Can i attache my application iview with transaction iview if it is possible then how ?
    4.> Can i display My application iview and transaction iview in single page ?
    Please guide me in this procesure.
    Regards,
    Gurprit Bhatia

    Hi Gurprit,
    1.> How i attached my application to iview ?
           You can attach your application to web Dynpro IView, for this login into portal, in the Content Management tab right click on a folder, then New --> IView. Select WD java Application. Select your application and create an Iview.
    2.> How i created Transaction iview ?
           Similarly, instead of selecting WD java Application, select iView template, you will get a list of available templates, and in this you will find template for Transaction Iview, in this template define the Tx for which you want to create the template.
    3.> Can i attache my application iview with transaction iview if it is possible then how ?
          No, I dont think you can attach your application to transaction Iview. but, you can attach both IViews on single page.
    4.> Can i display My application iview and transaction iview in single page ?
          Yes, you can attach  both IViews on single page. Again in Content Management tab, crate a PAGE; Then right click on created IViews and select  add IView to Page ßß: Delta Link.
    Hope this helps.
    Regards,
    Amit

  • Webdynpro application can't display a URL iView in a new External window

    Fellow developer:
    In my WD4A application, I called the method 'navigate_absolute' to display a URL iView in a new External window.
    The code is as follows:
    data lo_portal_manager type ref to if_wd_portal_integration.
    call method lo_portal_manager->navigate_absolute
    exporting
      navigation_target = 'ROLES://u2026'
      navigation_mode = '1'.            ('0' - Displayed in the Same Window, " '1' - Displayed in a new External Window)
    The application can display the iView in the same Window (navigation_mode = '0'), but cannot in a new External window (navigation_mode = '1').
    In the iView properties, the following attributes are set to:
    1. Launch in New Window - Dipslay in Separate Window
    2. Open iView Links in New Window - Yes
    If you know the answer, please advise.
    Thanks
    Bac Quan

    hi,
    i have the same problem. Did you solve it?. Please let me know...
    regards,
    MC

  • I have Two Monitors how do i enable dual display

    I have two monitors hooked up to my G4 and they are displaying the same thing how do i enable dual display where i can pan between them? Thanks for your help I am using Os 10.3.9

    Hi
    I'm fairly certain your graphics card doesn't support it. As far as I'm aware, Apple only introduced Macs with stock graphics cards capable of supporting dual displays (spanned) when they released the QuickSilver model. The cards in earlier G4s (Gigabit Ethernet, Digital Audio) had multiple connectors so you could connect either an Apple ADC display or third party VGA display, but I believe they only mirror each other.
    If you needed to support two independent displays at the time, I guess you went for one of the built to order graphics card options, or bought a second (PCI) graphics card.

  • Test button not enabled in Display Template...

    Hi,
    I created a query template then created a display template using that query. If i want to test that output then the Test button is not getting enabled. But if i use dynamic page generator or applet its working I am able to see the graph. Also Test button working in query template, only thing its not enable in Display Template.
    Thanks in Advance,
    Murugappan.

    Another method of quickly seeing changes to a display template is to use the <i>Dynamic Page Generator</i> accessed via the main xMII Menu under Visualisation Services > Dynamic Page Generator.
    Once there, pick the Query Template you are going to use from the top pair of applets, and use the bottom pair to select the Display Template you wish to "preview". Make sure that the Query Template is configured with default parameter values (i.e. that it returns good data when pressing "Test" immediately after opening it in the Query Template editor).
    Then, press the <i>Generate Image</i> button to have xMII run the query, pass the results to the selected Display Template and render the result as an image. Because the image name is random, it won't be cached by your browser, and you will be able to see changes to Display Templates without clearing your browser cache/restarting your browser.

  • In Maps Module, please enable simultaneous display of multiple GPS Tracks

    Hi LR4 team,
    First of all, a big thank you for adding geotagging and mapping support in this version.  I was one of the (many) users who was disappointed that geotagging (as well as soft-proofing) did not make it into LR3.  This time around I'll gladly part with $99 to upgrade to LR4 as it has some great new features.
    In the maps module, there does not seem to be a way to display multiple tracks simultaneously.  There's an option to switch between tracks (Map->Tracklog->Next Track|Previous Track) but it doesn't appear to be possible to display multiple tracks simultaneously.  This is a pain, especially if you load a tracklog which contains multiple tracks.  Many dataloggers will start a new track each time the GPS is power cycled (e.g. with battery changes).
    Instead of cycling through tracks one at a time (as is the case in LR4 Beta), please consider implementing a multi-select list where the user can check which tracks he/she wishes to display.  Naturally the multiselect should also allow for "Select All" and "Deselect All" and selection of (multiple) ranges using the Shift and individual tracks by holding the Control key -- you know, the typical behavior for lists.
    Also please ensure that LR4 hand comfortably handle large track files. I use a datalogger that records its location every 1-10 seconds throughout the day.  This results in a fairly large data set to process.  When travelling, I may not have the opportunity to upload from CF to LR and sync with GPS tracks for several days, which means that I may have accumulated somewhere in the range of 5MB to 50MB of NMEA track data (depending on the sampling rate) in around 5-20 separate tracks.  I'd like LR4 to be able to efficiently handle loading these tracks and tagging all newly imported images.  As above, it would be helpful to enable simultaneous display of many tracks.
    Thanks!
    PS: Love the animated (bouncing) trackpoint to disambiguate multiple images taken in close proximity to one another.

    Just as a side question:
    Have you ever loaded a tracklog containing different tracks belonging to more than 1 month?
    This is what a tracklog with tracks from 10/14/2011 to 11/07/2011 looks like here:
    Dropdown for the first November 2011 row:
    Dropdown for the second November 2011 row:
    Not a big problem, but also not nice.
    Beat
    Message was edited by: b_gossweiler: cosmetics

  • Will my Mac automatically stop using wifi when connected to an Ethernet enabled thunderbolt display?

    Will my 2012 Macbook pro retina  automatically stop using wifi when connected to an Ethernet enabled thunderbolt display?

    Depends.
    If you go in System Preferences / Network, you will see a list of all the network interfaces your current configuration has. If you click on the gear icon next to the minus sign, the drop menu will offer "Set Service Order...". There you can prioritize the order of use: Ethernet above Wi-Fi and wireless will be ignored if Ethernet is available.
    Note that the Wi-Fi card will remain active and associated with an access point nonetheless. It just won't be used for communications by the OS and apps.

  • Window size of web-enabled SAP transaction in an iView

    I have a problem which maybe a bug concerning a web-enabled SAP transaction within a Portal iView.  If the transaction is an ABAP report or a Dynpro program that requires a wide display area, the display is cut-off which requires to user to use the scroll bars.  However, if manually entering the SAP transaction within the tCode input-field of the web-enabled transaction inside the iView, the window length changes and thereby the scroll bar disappears.
    I would like to know how to set the inital width of the web-enabled iView so that there are no scroll bars when the iView opens an SAP transaction which requires a wide display area.  I've tried both the Wizards for creating iViews for R/3 and SAP transactions without success.

    Hi,
    You have to set the iview property to FULL-PAGE and height to be some 8000 in the portal then the problem solves.
    Regards,
    Lakshmi.

  • How to display infotype as iview in portal?

    Hi All,
      I have a requirement where i have to display a infotype in portals.
    For this i created transactional iview( tcode:pa20) but i must not display the selection screen for the employees.
    When the Employees login and click the link, they should be able their salary structure(infotype:9004) directly.
    How to go abt this.
    Regards,
    Mahesh.M.R

    Mahesh,
    first of all you'll need the Netweaver Developer Studio (NWDS). then you can decide either to develop with PDK an iView or you can create a webdynpro application.
    In both cases you'll need additionally an remote-enabled function module (RFM) or bapi that reads your infotype.
    another possibility (if you have already ECC6.0), you can write a webdynpro for abap application.
    kr, achim

  • Is there a way to enable 3D display outside of the software that came with the device?

    Hello, 
    I just bought this device and my primary use for it is the 3D function, but unfortunately there is no option to enable or disable the 3D function outside the set of software that came with it. For example in Cyberlink Power DVD 3D works fine, TriDef software creates depth from games but that is not actually what I need. I need just to have an image or a sequence in standar over-under or side-by-side formats and to enable the 3D effect on the display. 
    Some third party software, Stereoscopic player for example recognizes the monitor fine and displays the 3D content normally. But what I need is to display a full screen image from After Effects so I could have a live preview of the 3D, is there a way to somehow engage the 3D mode by some utility or driver?

    MHetlerovic, welcome to the forum.
    I read the manual thoroughly and it doesn't appear that there is any way to access the 3D mode without using some type of program.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Viewing PDF's in Safari 3 w/ "2 Pages" Enabled - Cover Displays Incorrectly

    When viewing PDF's in Safari 3 with "Two Pages" view enabled, pages 1 and 2 are displayed on the same spread. 3 and 4 are together and so on. Normally, when viewing two pages at a time, I'm expecting the front and back covers to appear seperately from the spreads. 2 and 3 are displayed together and so on (the assumption being that the PDF is based on a book-style layout).
    Preview displays PDF's the "correct" way, and Safari shows them "incorrectly", yet I can't find a relevant option in either application.
    In Acrobat, the equivalent option is View -> Page Display -> Show Cover Page During Two-Up.
    Any ideas?

    the application is safari. - in this case is it safari thats displaying the PDF or a plug in. at this point i dont have any 3rd party PDF plug ins.
    the link is on a website, i have not downloaded the PDF. When I click on the link, another safai window opens and it displays the PDF. I close the window, and click on the same link. When that happens, the gibberish appears.
    ....at this point...im maybe thinking that its a problem with the web server? This doesnt happen all the time.
    Thanks so much for you interest in my problem. =)

  • MSS reports displaying Employee Information iView

    Hi all,
    I'm currently working on MSS project where I'm trying to show reports on MSS portal.
    I have done the neccessary configurations regarding tables:
    T77MWBS (Manager's Desktop Senarios)
    T77MWBFCD (Function Code Definitions)
    T77MWBFCO (Object-dependent Function Codes)
    T77MWBFCH (Function Code Hierarchies)
    and also converted MDT data to MSS Reporting Launch Pad using RPT0 senario.
    The reports are showing in the MSS portal but when i click on for instance Birthdays, a new window pops up showing Launchpad for Reports page but I'm not able to define selection criteria i.e. select an employee from a list but instead I'm redirected to General Information page where General Data and Personal Data iViews are displayed. I clicked the Options button on the popup window to view Details and I'm able to see:
    Portal Components: com.sap.portal.wdintegrator.WebDynproIntegratorPage
    Object ID:  pcd:portal_content/com.customer.customer_content/com.customer.customer/com.customer.roles/com.customer.mss/com.sap.pct.erp.mss.general_information
    A theori i have is that Launchpad for Reports is redirecting me to General Information page and maybe the issue lies here. If that's the case, where do i change the pcd path to the correct Launch pad?
    I'm missing some configuration but can't seem to figure out what.
    Now, I'm hoping for you experts to guide me and show me the way to a successful and working portal solution.
    Points will be rewarded to helpful answers.
    Thanks in advance.
    Regards,
    Messay
    Can somebody please help me with this issue, it's urgent!!
    Edited by: Messay on Dec 1, 2011 11:09 AM

    Hello,
    Yes, you can build a WDA application to pick up the events from the WDJ application if and only if the events are portal events - quite a few of the WDJ apps actually share information through using a common component - not events.
    I would also check however, that there is not an easier way of picking up which employee has been selected - you may be able to within the RFCs that are being called add an enhancement to export the selected person to a shared memory object, which could be read by the WDA component.
    I've used this in the past to allow a WDA report to be launched from a WDJ application - taking the details of the selected item (in particular this was for WDA reporting on MSS ECM).
    Not sure what you mean with respect to the eventing of the FPM.
    You cannot include a WDA component as a Java FPM VC - so there is no way of having the WDA within your Java FPM application - events you raise to the FPM are only handled within the application.
    An alternate approach is to use the OADP views for selection and configure the columns to have links that open new windows, use the proxy class of the HPF link to embed in each link the personnel number of the employee selected - pass this as a URL parameter to the new page, this can then be picked up by both WDA applications.
    Hope this helps,
    Cheers,
    Chris

  • How to display related links iview in content area?

    Hi,
    I have created Related links, but they are opening in a separate windows even though I have set the attribute of the iviews to "open in portal content area".
    Please let me know how I can display the iviews of the Related links in the content area.
    -Ashwini.

    Hello Ashwini,
    I don't think you have changed the property at the right place.
    Open the iview for which related link is added. Now from the drop down box at the top right select Related Link. The related link editor will open which will show the related link iview. Select the iview and click the EDIT button at the bottom. The related link iview will open. Now Change the "Launch in new WIndow" property.
    When you add an iview as reletd link to some other iview, a delta link is created and added to the iview.
    This will solve ur problem.
    Regards
    Deb

  • How to enable/download/display hindi/marathi language in bb9790 bold os 7.1

    Please help on display/enable hindi lang in bb9790 bold os 7.1. Before os upgrade i was able to see msgs bt I'm not able to see them now. All appears as black box. Plz suggest

    Hi and Welcome to the Community!
    You need to ensure that you have an OS package installed to your device that contains the language you desire, as well as ensure that you have on your device fully activated the language. The simplest way is to, on a PC (you cannot do this on MAC):
    1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
    2) Uninstall, from your PC, any BB OS packages
    3) Make sure you have the BB Desktop Software already installed
    http://us.blackberry.com/software/desktop.html
    4) Download and install, to your PC, the BB OS package you desire:
    http://us.blackberry.com/support/downloads/download_sites.jsp
    It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
    Please use this KB as reference to make your selection:
    Article ID: KB05305 Localization support for BlackBerry smartphones
    5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
    6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
    If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
    If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
    KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to display the portal iView in Favorites screen without content role

    Hi,
          I created some T-iView containing some Z-report. Now my requirement is without giving any portal role how it will display in portal favorite  screen(left side of the portal main screen) so user can directly see the preview of the iview containing customize report?
    Thanks,
    Kundan
    Edited by: Kundan Babu1 on Sep 8, 2009 1:04 PM
    Edited by: Kundan Babu1 on Sep 8, 2009 1:06 PM

    1) first check your portal desktop which frame work it is using.
    By default we use default framework page.
    It can be found in the path   Content admin->portal content.   in pcd content navigate to  content provided by SAP-> end user content
    There you can find the default framework page
    open that and check the desktop inner page and click open
    remove the portal favorites iviews and put your own iview there.
    My suggestion is make a copy of your default framework page and customize it and use this framework page in the portal desktop
    Search for customizing the default framework page and desktop in SDN. you will get lot of links
    Here is the help link to know more on default framework page
    http://help.sap.com/saphelp_nw04s/helpdata/en/b4/771158e4cb4bf6af9974380948db86/frameset.htm
    Raghu
    Edited by: Raghavendranath Garlapati on Sep 8, 2009 2:29 PM

Maybe you are looking for