Encore CS 5 hangs when burning DVD

Windows 7 64-bit
Encore CS 5.1
Burned 2 projects successfully (6 Discs). Then:
It hangs at "Writing Files ..."
The DVD burner will keep spinning at high speed with LED flash (writing) but no progress is shown in Encore.
At that point, cancelling the build no longer work as it stucks at "Cancelling". I can't close the program either. The only way out is to kill it in Task Manager. That leaves the DVD burner spinning until the shut down.
Tried a few times, same results. The Disc is no longer empty after that and it show little writing on the surface.
Tried to upgrade QuickTime. Same results.
Followed
http://forums.adobe.com/thread/641646?tstart=0
to
http://forums.adobe.com/thread/629151?tstart=0
Installed Roxio pxengine fix
Same results.
I realized the 2 failed projects have muxed mpg files instead of separate video/audio. Have not yet tested if that's the problem.
Work-around: build to DVD folder and use ImgBurn to write to Disc. It works fine.
Any suggestions?
Thanks

Mavericks causes problems.
Some users reports the following fixes their problems:
http://forums.adobe.com/message/6109315#6109315
The earliest mavericks problems reported was the photoshop -1:
http://forums.adobe.com/message/5950080#5950080
The workaround was not to left-click on the menu. Use right click, or other options and menu commands.

Similar Messages

K3b hangs when burning DVD ISO

When I try to burn a DVD ISO with k3b, the application hangs with high CPU usage after I click "Start" and does not start burning. This has not been a problem previously.

Easy answer: did you try as root?

Encore Photoshop ERROR 1 when burning DVD

I'm burning a Blue ray disc in ENCORE CS5, I always get "photoshop Error 1" when trying to create a menu.
Any help. I'm on a Mac
Richard Australia

Mavericks causes problems.
Some users reports the following fixes their problems:
http://forums.adobe.com/message/6109315#6109315
The earliest mavericks problems reported was the photoshop -1:
http://forums.adobe.com/message/5950080#5950080
The workaround was not to left-click on the menu. Use right click, or other options and menu commands.

Hardware Error when burning DVD's

I keep getting an error message when burning DVD's using Toast Titanium on my iMac..it reads:
"Drive Reported an error, Sense key = hardware error, sense code = 0 x 03."
Twice after getting that message I couldn't continue to burn and it stopped, once it did continue to burn and finished successfully. Any ideas, anyone?
17" iMac G5 w/ iSight Mac OS X (10.4.3) upgraded to 1GB RAM

I get the same message today when burning from Toast 7.02 on my iMac. It happened when I was trying to make an audio CD from my iTunes collection (not when Copying from CD to CD). The exact message I got in the middle of my burn was:
The drive reported an error:
Sense Key = hardware Error
Sense Code = 0x03, 0x01
I tryed again with another CD and got the same thing. I never had a problem with these CD's (TDK CD-R up to 48x).
I wonder if there has to be some sort of software upgrade fro Roxio Toast or is this a superdrive malfunction/etc. My Superdrive gets very loud during this burn as well. I may take it in to Apple Genius Bar. Any ideas?

Unable to obtain full screen when burning DVD

I have a trial version of Adobe Premiere Elements
8. When burning dvd and then playing on my tv through dvd player I am not getting a full screen. The wide screen video covers about 3/4 of the screen instead of the entire screen. The settings I am using are NTSC widescreen dolbyDVD, and Quality is checked with no changes in quality. The preview screen is set on a magnificatgion fit. The Video is centered on the preview screen. I have spent hours trying to resolve this problem? I have a trial version and not sure if want to purchase with this problem.
I tried to upload the 8.01 up grade and my computer just blinks on and off; will not load?

I have been having the same problems. See my discussion threads on aspect ratios in the past few days.
Let me share my thoughts on this. Apparently Elements 8 is optimized to work on 4:3 CRT TV's; HD flat screen TV's must not have made much penetration in India yet. So when you set the output for NTSC widescreen, what Elements does is compress the widescreen data into a 4:3 frame, squeezing the image horizontally. Counterintuitively, what you have to do is select NTSC normal. Then Elements does not further squeeze the widescreen data. What it then does is fit it into a 16:9 letterbox, still containing the left and right bars, within the 4:3 frame. Set the DVD to playback in widescreen mode, which expands the letterbox image to full width of the TV, though retaining the left and right bars, then zoom the TV image to full the screen, to eliminate all the bars top, bottom and sides. Worked for me, but I used a SD camcorder set to record in widescreen.
A better option might be to change the default pixel aspect ratio, which I am yet unable to effectuate.

I'm getting "runtime error: unknown exception" when burning DVDs on PE12

I'm getting "runtime error: unknown exception" when burning DVDs on PE12

Some of this may be for Premiere Pro, but SHOULD also help with Premiere Elements
http://helpx.adobe.com/x-productkb/global/troubleshoot-c-runtime-errors-products.html
Also http://www.microsoft.com/en-us/download/details.aspx?id=14632 for a Microsoft download
Also search http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US for Microsoft help articles
Set your Premiere Elements DVD output to a folder on your hard drive and then use the FREE Imgburn to burn the folder to disc for DVD... Premiere Elements does NOT burn to a folder for BluRay (send the author a PayPal donation if you like his program)
Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any toolbar add-ons... Set Imgburn to use the slowest burn speed your drive and media will use... I set my burn speed to 1x and let Imgburn adjust to the actual minimum

Error53005 when burning DVD

When I build a disc for a preimere project, it shows the following error after the encore is over and starting burning...
"Encore was unable to complete the operation because of a hardware error. Sense Code 53005."
I've tried to google but I didn't find anything
my burner is a NEC ND 3520A

This LOUNGE area is not visited by many/most people, and you should have posted in the regular forum anyway, since this is a technical question
But, go read Things and Software to AVOID when authoring/burning a DVD
Read all links/sub-links to create a "best" burned disc
Start --> http://forums.adobe.com/thread/608660?tstart=0
#2 here has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941?tstart=0
Also... you could have bad media, or a failing drive, or a drive that needs a firmware update
What brand of media?
ADDED - I see the message was moved to the regular technical forum

Error when burning DVD

I just bought a Mac a few weeks ago, and have had some trouble burning DVD's. I have a G5 running 10.3.9, with a Pioneer Superdrive. I try to burn an image in Disk Utility, but get the error message "The disc is reserved for exclusive use by another application". When I try just burning files using finder, it says "This disc cannot be used". I have tried DVD-R and DVD+R. Anyone have any ideas?
Thanks!

Hi macaboo
Welcome to apple discussions. Just to add to the already excellent advice kindly provided to you by Fred Shippey;
I too have one or two suggestions:
First is to delete the plist for iDvd (but first quit the app). The plist is located in your preferences folder and looks like this (assuming the app has been launched at least once):
com.apple.iDvd.plist
Now try your iDvd project again. But if that too fails then ...
Delete encoded assets from the Advanced menu tab and then try the burn again.
That procedure looks like this. Hope this helps but if not just come on back. Good luck.
Click Here
Message was edited by: SDMacuser

Error when burning dvd's

I have a satellite a305 with vista. I had been downloading torrents awhile back and got a nasty something because my computer went crazy. I managed to "fix" it except that the keyboard and mouse were nonresponsive. A usb mouse worked but no usb keyboard would install. Despite this, I was still able to burn dvd's.
Now, since it is unacceptable to NOT have a properly working keyboard I had to factory reset the computer. Now it all works great.
EXCEPT when I burn a dvd (dropping files to it....I haven't downloaded any 3rd party software) it starts to encode...gets to about 3.5% and then encodes super fast (usually burning a dvd takes 1 1/2 to 2 hours) and eject the disc after 30 seconds. A window pops up saying an error ocurred while burning the dvd. I am using memorex dvd-r discs. It did the same thing when I used my old disks (Sony dvd-r) but I assumed that since they were scratched a bit that must be causing an error.
I just want to make my DVD's. So frustrated!! I tried checking to see if Toshiba had a driver update I was missing since I did an out of the box reset, but they're screen to choose my laptop doesn't have my model available.
Any ideas for me?

Since Toast is not an Apple product, you should probably post your question on Roxio's discussion boards:
http://forums.support.roxio.com/

Error occur when burning DVD

My macbook pro can't burn DVD, both DVD-r and DVD+R DL.
I tried to use a better media (eg. verbatim) and slower speed (1X)
but the problem comes again and again.
I suspect the error may relate to the failure of "laser component" in the DVD drive
Because when I was using LiquidCD ,whcih is a DVD buring software, to burn DVDs,
the error message said that the software cannot control the strength of the laser.
Does it mean the problem relates to the failure of "laser component" in the DVD drive?
Also, I tried Hardware Test, but it said everything is fine.
Any method can help to check or solve the problem?

Take it to an Apple Store or call Applecare assuming it is under warranty. Is this problem only with this software, which I have to admit I have never heard of.
Out of warranty I'd get an external burner vs. fix it since they perform better anyway.

Error when burning DVD - no plugin DLLS

When burning a DVD I get an error message that says Plugin Coder error : no plugin DLLS. Why is this happening and how can I fix it?

They do but aren't cheap.
Look at SuperMediaStore.
You might be able to find them cheaper. I was just checking to see if they make them.

Error when burning DVD RW (Error Code 0x8002006E)

Works with DVD +R, -R, CDR... but it wont burn DVD+RW for some reason
I had this problem 3 years ago when it refused to burn CDs, and I had my ODD replaced with one of these
MATSHITA DVD-R   UJ-857E:
Firmware Revision:          ZF1E
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, DVD-DAO
Media:          Insert media and refresh to show available burn speeds
So here I am again having the same problem - 'burning the disk failed because an unexpected error occured (Error Code 0x8002006E)
I tried both burning from Finder and disk utiilty. I tried quickly erasing the data on it, which was nothingnd when I tried to burn something it threw up this error - 'The disk can't be burned, because the devide failed to calibrate the laser power level for this media' (their bad grammer not mine)
So what is this a software problem or another faulty ODD?
I ran a hardware test recently and no problems were identified.

I just tried it again using a different account, same problem. I was burning DVD+Rs already today, then I went out and bought a packet of discs from tesco DVD+RW and they wont burn no matter which way I try it. I remember having this problem with Tesco CDRs 3 years ago when I sent my macbook in for repair, but I think I have used tesco discs since thren without problems. I've had trouble on two occasions reading music CDs as well + the drive is sluggish and noisy when inserting/ejecting discs.
Finding a lot of threads on this and not really much in the way of solutions. At best I've been able to ascertain that the problem is probably software related owing to the error code.
I don't know what else to try. I hope tesco take back this stack of discs that's probably got nothing wrong with them, I doubt Apple will refund me.
This computer has just turned out to be an endless source of problems and headaches.

Itunes hangs when burning cd's - possible solutions

Hello everyone,
I've had what appears to be the same problem as many many more people on this site.
I haven't got a complete fix, after 4 months of trying but I've got as far as I have with the help of Toonz and the people at Apple.
Now here is what I have found:
1. The problem with my Itunes hanging at burning only happens if I have a mixed playlist that I am trying to burn. When I say mixed I mean a mix of purchased tracks and uploaded tracks from my cd collection. Just uploaded tracks work fine.
2. If I just burn a playlist of purchased tracks it works fine too.
3. If I don't control alt delete when it hangs, and I wait for up to 2 minutes, the burn evenutally kicks in. Don't do anything. Just leave it and see what happens. I was having to control alt delete to get out of the unresponsive Itunes, but by chance, yesterday, discovered that by leaving it it finally burnt my cd! This was a mixed cd with both purchased tracks and uploaded tracks.
Now, the people at Apple don't yet know why this is doing this. It only happens since version 6 of Itunes. This version (I think) was the first to introduce the "checkingplaylist" stage of burning and they seem to think that it might just be something to do with that.
Anyway, that all helped me. It is still frustrating to have to wait for a couple of minutes, but it's better than nothing. They are still trying to get to the bottom of this for me, too.
I hope this helps at least some of you.
Please give me some feedback if it has, as I'd love to know that all my efforts over the last few months could help others!
Good luck
Jane

I think I'm in love...
I just spent the past 3 hours running through reinstalls of iTunes, looking at every support topic and finally found this wonderful, wonderful thread.
I am having the same exact problem with mixed playlist burns.
I also have great success with waiting for only about 1-2 minutes while iTunes shows "Not Responding". Then it fires right up and burns perfectly.
Thank you for posting this quazi solution, and it has helped me tremendously. Well, at least it has saved me from having to transfer all of my music to a new digital music manager.
I hope this issue gets resolved soon
Windows XP

Internal software error: .\vobulator\titleplanner\cgopgrouper.cpp, line 401 when burning DVD with sl

I am burning a DVD that has 10 slideshows. Each slideshow is treated as a chapter. I have burned DVDs in the past using this method with no problems. Now, with this project I get the following.
internal software error: .\vobulator\titleplanner\cgopgrouper.cpp, line 401

This error came up again (the first time i had to rebuild), and i figured out that it had to do with a clip i had in a timeline that needed trimming, and would not butt up cleanly to the preceeding clip. i am assuming that the chapter point i inserted did not fall on a GOP, and generated this error.
when i took that clip out of the timeline and put it in it's own seperate timeline, the disc burned with no problem.
hope this help someone else skip the frustration i had.

Subtitles when burning Dvd-Toast 10

Hello im using toast titanium 10 and i have a problem with subtitles when burning a dvd
the subs are .srt at the same name with the .avi in the same folder.
How can i add subtitles at the dvd im converting-burning?

Sounds like a question that should be asked in the Toast 10 forum.
Good luck,
x

Encore CS 5 hangs when burning DVD

Similar Messages

Maybe you are looking for