Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator

Dear Techies,
We have registered an Extra Information Type as self service OAF page and did some validations using user hook which are working fine. But for some requests EIT creation page is throwing below errors.
1. Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
2. An unexpected situation occurred while executing routine FND_DATA_SECURITY.GET_SECURITY_PREDICATE_HELPER.The cause was: The parameter 'p_object_name' cannot be 'GLOBAL'.
System throws these errors whenever user hook suppose to throw our customized validation messages.Since we are at UAT instance, we are bouncing apache and oacore to get rid of these errors every time they appear. But we cannot bounce once it is moved to production.
Kindly share some ideas to fix these errors as we are very close to Go-Live and we are facing this issue with all EIT's and SIT's.
Thanks and Regards
Dileep Kumar.

Hi Mahesh,
Thanks for reply.
I have gone through the link that you have suggested. But our EIT user hook validations doesn't have any code related to submission of concurrent programs. More over our error is not stable. If we bounce the apache and oacore, the system will work fine without unexpected errors for some time. We are not even able to replicate these errors.
Thanks and Regards
Dileep Kumar.

Similar Messages

ORA-20160: Encountered an error while getting the ORACLE user account.

when users trying to apply for the leave . Once they apply for the leave and the respective manager approves it.
They get an notification mail with the error message The changes were not applied because ORA-20160: Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator. ORA-06512: at "APPS.ALR_PER_ABSENCE__800_53447_IAR", line 3 ORA-04088: error during execution of trigger 'APPS.ALR_PER_ABSENCE__800_53447_IAR'
EBS : 12.1.2
Database : 11.2.0

We are also facing the same issue , with the following error.
The Changes were not applied because ORA-20160: Encountered an error while getting the ORACLE user account for your concurrent request, Contact your system administrator. ORA-06512: at “ APPS.ALR_PAY_ELEMENT_801_53338_IAR”, line 1 ORA-04088: error during execution of the trigger ‘APPS.ALR_PAY_ELEMENT_801_53338_IAR’
Dear Hussein ,
As per your suggestion , if we disable the trigger , does it workflow goes ahead without any problems ?
By Disabling the trigger , what would be the impact ? I mean does we are going to loose the data that was supposed to be updated the trigger.
And basically please educate me . what is the use of this APPS.ALR_PAY_ELEMENT_801_53338_IAR’ ?
Regards
Raghu

Error while getting the ORACLE user account for your concurrent request

Hi ,
When I am submitting the Concurrent Program from OAF page Iam getting
Error
Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
When we will face this error.
Not able to submit the Request
Krishna

Krishna
Try like this
public int submitCPRequest(String shipmentId) {
System.out.println("into submitCPRequest");
try {
OAApplicationModule am = pageContext.getApplicationModule(webBean) ;
OADBTransaction transaction = am.getOADBTransaction();
Connection conn = transaction.getJdbcConnection();
ConcurrentRequest cr = new ConcurrentRequest(conn);
cr.setDeferred();
String applnName = new String("XXAPL"); //Application that contains the concurrent program
System.out.println("ApplName"+ applnName);
String cpName = new String("SHIP_REQ"); //Concurrent program name
System.out.println("Concc Name"+ cpName);
// String cpDesc = new String("Shipping Request"); // concurrent Program description
// Pass the Arguments using vector
// Here i have added my parameter headerId to the vector and passed the
//vector to the concurrent program
Vector cpArgs = new Vector();
cpArgs.addElement(shipmentId);
System.out.println("Args"+ cpArgs);
After this it is going into exception
// Calling the Concurrent Program
int requestId = cr.submitRequest(applnName, cpName, null, null, false, cpArgs);
System.out.println("Req Id"+ requestId);
tx.commit();
return requestId;
catch (SetDeferredException e)
throw new OAException("SetDeferredException " + e.getMessage(),OAException.ERROR);
catch (RequestSubmissionException e) {
System.out.println("Into Exception");
OAException oe = new OAException(e.getMessage());
oe.setApplicationModule(this);
throw oe;
}Thanks
AJ

Problem calling web service: Error while getting the ORACLE user account

Hi All!
I was able to call the service EGO_ITEM_PUB-PROCESS_ITEM, but after implemented some patches, suddenly I get this error as result:
- <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
- <env:Body>
- <OutputParameters xmlns="http://xmlns.oracle.com/apps/ego/soaprovider/plsql/ego_item_pub/process_item__1/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<X_INVENTORY_ITEM_ID xsi:nil="true" />
<X_ORGANIZATION_ID xsi:nil="true" />
<X_RETURN_STATUS>U</X_RETURN_STATUS>
<X_MSG_COUNT>1</X_MSG_COUNT>
<X_MSG_DATA>Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.</X_MSG_DATA>
</OutputParameters>
</env:Body>
</env:Envelope>
Any ideas?
Thanks,
Konrad

hsawwan wrote:
Hi,
I was able to call the service EGO_ITEM_PUB-PROCESS_ITEM, but after implemented some patches, What are those patches?
# Patch 8407693:R12.TXK.B ISG: Service Generation Failure - Java Compiler Could Not be Found
# Patch 8459663:R12.OWF.B : Mandatory Consolidated One-Off Fixes for ISG on Top of 12.1.1
# Patch 8916358:R12.OWF.B : Service Timeout When Invoking Services Deployed to Integrated SOA Gateway
# Patch 9349321:R12.OWF.B : Issue with item Bulk Load in Oracle Product Hub PIP 2.4
# Patch 9446625:R12.FND.B : 1OFF:8995921:12.1.1:12.1.1:PERF : LoginModules Performance Issue
# Patch 9070077:R12.OWF.B : 1OFF:9045280:12.1.1:12.1.1:Invoking a Web Service Requires NLS Lang When It Should be Optional
# Patch 9153106:R12.OWF.B : IREP_Parser.PL Exits with GETPWUID Function IS Unimplemented in PARSER.PM -> Wichtig für ISG (für custom pl/sqls im ISG)
# Patch 9004712:R12.OWF.B : One-Off for IREP PARSER on Top of Oracle E-Business Suite Release 12.1.1 -> Wichtig für ISG (für custom pl/sqls im ISG)
IAS:
# Patch 8607523 for the AS version 10.1.3.4
Oracle Support told me that I need this patches because of some other problem (generating wsdl and deploy for BOM_BO_PUB package does not work in my environment) and since that, the process_item call stopped working!
btw: The EGO_ITEM_PUB-PROCESS_ITEM call for an existing item still works (I can modify the description), but creating a new item does not work anymore. Here are the parameters I send to the web service:
Header:
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken>
<wsse:Username>sysadmin</wsse:Username>
<wsse:Password
Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">sysadmin</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
<q0:SOAHeader/>
Body:
<q1:InputParameters>
<q1:P_API_VERSION>1.0</q1:P_API_VERSION>
<q1:P_INIT_MSG_LIST>T</q1:P_INIT_MSG_LIST>
<q1:P_COMMIT>T</q1:P_COMMIT>
<q1:P_TRANSACTION_TYPE>CREATE</q1:P_TRANSACTION_TYPE>
<q1:P_ITEM_NUMBER>KHR_WS_05</q1:P_ITEM_NUMBER>
<q1:P_DESCRIPTION>desc2</q1:P_DESCRIPTION>
</q1:InputParameters>
Thanks,
Konrad

Error while starting the Oracle BI Server

Hi ,
I am getting the services.msc error while starting the Oracle BI Server as -
Error handling the control request.
Please help me out ..
Thanks and Regards ,

It is actually Windows services error that I am facing ....
while starting the BI server after making any changes to NQS config file ..
Could not start the Oracle BI Server service on Local Computer
Error 1064: An exception occured in the service when handling the control request
Message was edited by:
user460211
Message was edited by:
user460211

Error "Encountered an error while exporting the data. View the lof file (DPR-10126)

Hello,
I would like to have sugestions and help to solve a problem in IS 4.2.
I've created a view from two tables, joined together with the key from each one.
Then i've binded the rule with the view (mentioned above) created and calculated score for it.
The calculation is successful, however when i try to export all failed data i have the following error:
"Encountered an error while exporting the data. View the lof file (DPR-10126)"
When exporting failed data from calculations made directly to the datasources i do not encounter any problem, but when i try to export all data to CSV file (not only the 500 results limit) i have this kind of error.
However, when i visualize the data from the view created, it is also possible to export to csv file.
Resuming, the error occurs only when exporting all failed data from the view.
Can anyone help with this issue?
Thx
Best Regards,

Hello,
Your information is correct.
I've just confirmed it in the 4.2 SP3 Release Notes and they specifically refer to this issue.
A user who has 'View objects' rights for the project and a failed rule connection cannot export the failed data. This issue has been fixed in this release.
Thank you very much for your input.
Best Regards,

Hyper-V encountered an error while Configuring the network on Vmachine

Hi all,
i am novice in window server 201, I learning from a ebook.While i doing the step of creating virtual machine , i got this error
Hyper-V encountered an error while configuring the network on Vmachine
Hyper-V encountered an error trying to access an object on computer 'localhost' because the object was not found. The object might have been deleted, or you might not have permission to perform the task. Verify that the virtual Machine Management service
on the computer is running. If the service is running,try to perform the task again by using Run as Administrator

Windows Server 201? Are you sure?
What sort of machine are you trying to install and run Hyper-V on? What OS is it running?
Bill

Error while filling the set up table for 2LIS_11_VAITM

Dear Experts,
i am facing an error while filling the set up table for 2LIS_11_VAITM in the source system.
The error was "Company code for sales org 9000 does not exist (document 1326)".
when i checked the document in the Header table VBAK,company code was blank for the document .
Company code was there in the selections for the setup table.
The error means that company code should be maintained for the sales document as per my knolwedge.i think document was not created properly in the source system.
Could you please help me out to over come the problem.
Regards,
Sunil...

in the selection screen for filling the setup table, there is a parameter No. tolerated faulty documents
you'll have to enter at least '1' here in your case
it might be that there are other erronuous records, in that case it will crash again, and you'll have to increase the value for this parameter
(under "normal" circumstances, all documents in the source should be correct... but apparently it's possible to circumvent this)

Error while running the Oracle Text optimize index procedure (even as a dba user too)

Hi Experts,
I am on Oracle on 11.2.0.2 on Linux. I have implemented Oracle Text. My Oracle Text indexes are fragmented but I am getting an error while running the optimize_index error. Following is the error:
begin
ctx_ddl.optimize_index(idx_name=>'ACCESS_T1',optlevel=>'FULL');
end;
ERROR at line 1:
ORA-20000: Oracle Text error:
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.CTX_DDL", line 941
ORA-06512: at line 1
Now I tried then to run this as DBA user too and it failed the same way!
begin
ctx_ddl.optimize_index(idx_name=>'BVSCH1.ACCESS_T1',optlevel=>'FULL');
end;
ERROR at line 1:
ORA-20000: Oracle Text error:
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.CTX_DDL", line 941
ORA-06512: at line 1
Now CTXAPP role is granted to my schema and still I am getting this error. I will be thankful for the suggestions.
Also one other important observation: We have this issue ONLY in one database and in the other two databases, I don't see any problem at all.
I am unable to figure out what the issue is with this one database!
Thanks,
OrauserN

How about check the following?
Bug 10626728 - CTX_DDL.optimize_index "full" fails with an empty ORA-20000 since 11.2.0.2 upgrade (DOCID 10626728.8)

Evdre encountered an error while retrieving the data

hi
all
i have an error
"evdre encountered an error while retrieving data" evdre addin
evdre cannot retrieve data
working on ms 7.0 bpc
excel 2003
i have gone thru the sap service place and found that i have to replace 2003 to 2007
please let me know also if there is any possibility to change my reports in such a way that i may pass with out this error
what is the mistake i am doing while i create the reports ?
ur help is appreciated
thanks

This error message has many root cause.
First let's check if the installation of BPC client is correct.
Just use a simple EVDRE functions and try to expand.
Are you receiving any error? If yes then I suggest to try also for Apshell ppset.
If it is not working then that's means you have a problem with installation.
If you can use EVDRE from another machine then the problem is installaytion of the client.
If the problem is into all computers then the problem is into server.
If the problem is just into one report then you have to review that report because some parameters sent to EVDRE are wrong otit is trying to retrievea region which is toobig.
I hope this will help you toinvestigate the issue.
Regards
Sorin Radulescu

Error while doing the Oracle 9i Database Installation

PROBLEM ONE
While installing the Oracle Database 9i on Windows 2000 Server with 256 MB Ram, I got the following error
Windows - Wrong Volume
The wrong volume is in the drive. Please insert volume ORCL9011_1 into drive E:.
This message occured when percentage done was 100%. It was copying visualsdo.exe
PROBLEM TWO
Then I deinstalled the Oracle 9i software and deleted the oracle folder from both the Windows Explorer as well as in the RegEdit.
Again I started doing the installation...
In Oracle Database Configuration Assistant, while it was installing "Adding Oracle JVM", I got the following error
"Oracle Database Configuration Assistant: ERROR"
"ORA-06576:not a valid function or procedure name"
When I clicked Ignore I got the following error
"Oracle Database Configuration Assistant: ERROR"
"ORA-04021:timeout occured while waiting to lock object
SYS.META-INF/MANIFEST.MF"
Please let me know why this problem occured and what is the solution for this......
If you need any information then please let me know
With Regards
Deepak

You have too few RAM on your machine, even you could successfully create an instance, it's going to slow as hell.
When you run DBCA to create database, instead of actually creating the database you could choose to dump the SQL scripts and files used for database creation to a directory. This way will give you a chance to modify pfile and reduce the SGA parameter. I believe the default SGA of instance created by DBCA is already beyond your RAM limit.

Fully_qualified_remote_host_name while Configuring the oracle User's Enviro

Hello All,
I am installing Oracle 11g R2 on HP-UX server.
I am connected to the HP-UX server through putty.
On the Quick Installation guide i reached the section "Configuring the oracle User’s Environment" and i have the below questions:
In the below
Enter the following command to ensure that X Window applications can display
on this system:
$ xhost fully_qualified_remote_host_name
what is the fully_qualified_remote_host_name ? is it the IP address of the my own PC where i am connecting to the remote server? or the IP address of the server it self?
and in the below example
$ export DISPLAY=local_host:0.0 -- local host is the IP of the PC i am connecting from it to the server?
Regards,

Hi;
In the below
Enter the following command to ensure that X Window applications can display
on this system:
$ xhost fully_qualified_remote_host_name
what is the fully_qualified_remote_host_name ? is it the IP address of the my own PC where i am connecting to the remote server? or the IP address of the server it self?
and in the below example
$ export DISPLAY=local_host:0.0 -- local host is the IP of the PC i am connecting from it to the server?If you use putty than you need to some program like VNCviwer or xming etc. to can see GUI screen on your desktop.Please check my previous post
Re: 11gR2 Grid Infrastructure cannout launch installer OEL 5.5
Still have some issue than update thread.
Regard
Helios

Error while executing the reversal in KO88 for an internal order

Hi Experts,
I am getting the below error while doing the Actual settlement : order reverse through t code KO88. we are currently using the SAP ECC 5.0 and i found the SAP notes 215944 and 335428, which are upto release 4.6C.
System error - deletion not possible
Message no. AAPO186
i can see that the doc has generated for the settlement and for reversal it is giving the error. Can some one help me who has faced this type of problem earlier.
Thanks & Regards,
Venkat

Hi,
Additionally, try to check 300273 note.
Regards,
Eli

Error while calling the Mapping function module for BW Extraction

Hi
iam getting runtime error while calling the BW mapping function
The error description is as shown below.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "GP466CV1Y7W2VML1PJ3VB80KDOP" had to be terminated
 because it has
 come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "CALL_MAPPING_FUNCTION" "(FORM)", nor was it propagated by a RAISING
 clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "CMS_CB_BW_MAP", the STRUCTURE parameter "EXTRACT_DATA" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter " " has an incompatible fragment view.
I am passing the EXTRACT_DATA parameter as specification LIKE with the associated type - corresponding structure
Please let me know how can i resolve this issue
Regards
Leon

Dear benarji ,
I'm having the same problem help me to correct . I have mentioned below as what error i got.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "ZDLROUTSTANDING_COPY" had to be terminated because it
 has
 come across a statement that unfortunately cannot be executed.
Error analysis
 An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "PDF" "(FORM)", nor was it propagated by a RAISING clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "/1BCDWB/SF00000080", the STRUCTURE parameter "IT_WORKS_SF" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter "SFTWORKS" has an incompatible fragment view.
Missing RAISING Clause in Interface
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 876
 Module type (FORM)
 Module Name PDF
Trigger Location of Exception
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 894
 Module type (FORM)
 Module Name PDF
Source Code Extract
Line SourceCde
864 ** i_logo = 'ENJOYSAP_LOGO'
865 * IT_LIST_COMMENTARY = I_LIST_COMMENTS1.
866
867 ENDFORM. "alv_top_of_page1
868 *&---------------------------------------------------------------------*
869 *& Form PDF
870 *&---------------------------------------------------------------------*
871 * text
872 *----------------------------------------------------------------------*
873 * --> p1 text
874 * <-- p2 text
875 *----------------------------------------------------------------------*
876 FORM pdf .
877
878 * *** Smartforms & PDF ***
879
880 ssfctrlop-no_dialog = 'X'.
881 ssfctrlop-preview = 'X'.
882 ssfctrlop-getotf = 'X'.
883 ssfcompop-tddest = 'ERP7'.
884 DATA : mcheck LIKE sy-subrc.
885 CLEAR : fm_name.
886
887 "Get Function module name for given smartform
888 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
889 EXPORTING
890 formname = 'ZSFDLOS1'
891 IMPORTING
892 fm_name = fm_name.
893
>>>> CALL FUNCTION fm_name
895 EXPORTING
896 control_parameters = ssfctrlop
897 output_options = ssfcompop
898 mrefno = mrefno
899 * P_TITLE = MTITLE
900 IMPORTING
901 document_output_info = st_document_output_info
902 job_output_info = st_job_output_info " IT_OTF_DATA
903 job_output_options = st_job_output_options
904 TABLES
905 it_works_sf = sftworks
906 EXCEPTIONS
907 formatting_error = 1
908 internal_error = 2
909 send_error = 3
910 user_canceled = 4
911 OTHERS = 5.
912
913 IF sy-subrc NE 0.
Advance Thanks

Error while deriving the currencyfrom table T001P for International payrol

Dear Experts,
when i run the payroll in simulation mode. im geting an error msg as ' error while deriving the currency from table T001P'
I have checked all PA assignement with compnay code and country grouping (molga =99), which is correct and also i have checked all bellow tables.
V_T510F_B
T500W
T500C
Transaction code OE00
In Trasaction code OE00, system not allowing me to give the currency (LKR - Srilankan Rupees). its giving an error msg as ' maximum of 2entries are allowed for each country in table T500c'(Its not alowing me to save it)
I dont knw how to over come from this issue.
I have chnaged the company code and tried but still im getting the same error while running the payroll.
Any idea from Anyone....?
Regards
Dinesh.

HI Mohan,
Thz for your reply.i have checked all tables which u have mentioned. but currency (LKR- Srilankan Rupees) has been assigned.
In V_CURC.. there are no 2 entires. but when i try to assign the currency in T-Code OE00. its giving an error msg " A maximum 2 entries are allowed for each country in Table T500C"
I have tried to make one more intry in the same table and the same currency then its giving an error msg as " An entry already exist with the same key"
V_TCURR is currency exchnage rate... Is it necesory?
Thz,
Dinesh.

Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator

Similar Messages

Maybe you are looking for