End user and password change

Hi.
I have a small application running on 3.0.
I created 10 end-users with a dummy password as "not developers" and "not administrators". Further I marked for change password at next logon.
However, users are able to logon using the the link from the logout page directly into the application without changing the password. Also, the "FIRST_PASSWORD_USE_OCCURED" = N in table wwv_flow_fnd_user.
Change_password_on_first_use is Y.
Anyone seen this before?
rgds
Kjell Ove

Alex,
Connect as the Application Express product schema, e.g., FLOWS_030000 for version 3.0. Unlock this account first if it is locked or simply connect as SYS and alter session set current_schema=flows_030000. Then:
select value from wwv_flow_platform_prefs where name='MAX_LOGIN_FAILURES';
That should show the 9999999... value. You can update that row with a new value.
We'll look into fixing this problem. Thanks for the info.
Scott

Similar Messages

When i change the hard drive does the admin user and pass change ?????

when i change the hard drive does the adminstrator user and password change ?????

bin_bella wrote:
when i change the hard drive does the adminstrator user and password change ?????
Yes, if you do a fresh install of the operating system, it's like a brand new machine.
No, if you restore from a backup like a bootable clone or TimeMachine drive.
Most commonly used backup methods

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

URL in sender SOAP channel with user and password

Hi Expert,
I have developed SOAP to proxy scenario.The serder WSDL is generated by using sender agreement. In the WSDL we are using default below URL.
http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel
But the client requirement is that he want SAP user and password also in above url.
Is this possible in sender SOAP channel?
Any body can please help me for above issue?
Thanks.
Edited by: darshana-PI on Feb 1, 2012 5:26 PM

Thanks prateek,
we have used HTTP plain adapter for this and used below link to call that interface in PI. And its working.
http://server:port/sap/xi/adapter_plain?service=<xxx>&namespace=<xxx>&interface=<xxx>&sap-user=<xxx>&sap-password=<xxx>&qos=BE
I can understand the security related problem, but that was the requirement for end application.
Thanks,
Darshana.

How to pass user and password in workspace when open a bqy

hello,
how to pass user and password of workspace when refresh a bqy for a query in DB2.
I don't know where to insert the properties in order to use user and password of workspace,
I want to use user of login of workspace,
I don't want to make to appear the mask of login newly when the user refresh the query.
I don't want to set a default user and password
thanks
massimo

Dear Friend,
What you mean?
1. Do you mean how to pass login page on workspace ?
2. or Do you mean how you can use a connection file to connect to db that is hide from user?
3. or You mean how to use user & password to login to doc on workspace
Answer for 1:
use link
http://HyperServer:45000/workspace/browse/get/MyFolder/MyIR.bqy?user=admin&pass=password
Answer for 2:
a) Upload or import connection file ( MyConn.oce ) to DB2 into workspace,
b) for IR doc properties change file connection ( MYConn.oce )
Answer for 2:
use link without user & pass parameter
http://HyperServer:45000/workspace/browse/get/MyFolder/MyIR.bqy <?user=admin&pass=password>
regards
siyavuş

What is the user and password to Oracle 8.17

Dear expert,
I have loaded IDES 4.7 with Oracle 8.17.
I wish to query the SAP table using Oracle PL/SQL.
What is the user, password and string to login into SAP Oracle database? Since I was not asked for user and password when installing Oracle I do not know how to login.
Also can you let me know how to view/change table fields in SAP tables. I understand there are different ways but which in your opinion is the easiest to find the record I want to correct(as some tables have many fields).
Your kind assistance is appreciated.

Thank you for your reply. Both the user and password does not work on my IDES 4.7e system.
However I tried with user Internal and without password and I successfully login.
I then create a new user and also change the user=system
password.

Forget router user and password

Dear All,
I forget my CISCO1921-SEC/K9 and cisco 1941 routers user and password. So I want to reset my router. I have tried by following method, but did not success. Every time ask user name and password for User Access Verification. Pls. help me.
Method1:
I am tried to factory reset by press reset button. Did not work
Method2:
1) Connect via console to the device
2) Power on the device
3) Hit ctrl+break until you are in rommon mode
Type confreg 0x2142 at the rommon 1> prompt in order to boot from Flash.
This step bypasses the startup configuration where the passwords are stored.
Type reset at the rommon 2> prompt.
The router reboots, but ignores the saved configuration.
Type no after each setup question, or press Ctrl-C in order to skip the initial setup procedure.
Type enable at the Router> prompt.
You are in enable mode and should see the Router# prompt.
Thanks,
Qamrul

thank you for provide link.
i tried but failed. now i need to try by following method. but i don't know how can i remove flash from router and what is step?
If unable to break into ROMMON mode, perform these steps:
Remove flash.
Reload the router. Router will end up in ROMMON mode.
Insert flash.
Perform standard procedure for password recovery.
http://www.cisco.com/c/en/us/support/docs/routers/3800-series-integrated-services-routers/112058-c1900-pwd-rec-00.html

Can't write my user and password when accessing OV...

Hi all,
can somebody help me to resolve my issue
when i access OVI, i am requested to enter user and password, but when i write my user and password, it looks like i am writing in white caracters , i can't see what i am writing.
thx for all and regards

are you using predictive text ?what phone have you ?you can use the hash key to change characters
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

User and password fields vanish in login window

Hi all
I'm scratching my head. I have a managed 10.7 client, bound to a 10.7 OD, for various testing. Set login window to show user and password text fields. Sometimes (but not always, haven't found a rule yet), there is a little left/back arrow left to the user field. If I click it, user and password text fields vanish, leaving me with a more or less blank login screen except for the restart/shutdown/sleep buttons. Nothing I tried will bring back the text fields, and the only option is to do a restart.
Anyone seen this? What should it be good for?
I thought that maybe this should be something like in Windows, where you have to press ctrl-alt-del to get the actual login screen to show, but neither cmd-option-shift-enter nor cmd-option-ctrl-enter have any effect. Nor does esc or ctrl-option-esc.

Finally got the upgrade rolling again. Not sure which trick did it, But the last thing i did was this. I changed the password for the user SAP* using the configtool under cluster-data -> Global server configuration -> services -> comn.sap.security.core.ume.service -> ume.superadmin.password. Type in the value field, hit "set" and retyped it in again. Hit save, restarted the instance. I had tried this earlier under the single instance server. But that didn't seem to take effect.

Crystal needs user and password.

When I run my program in the same laptop that I have devoloped my application I dont have problems, but when I try run the application in another laptop I have problems with user and password.
In my application, into load event of my report I have read this sentence.
report.SetDatabaseLogon(UsuarioSQL, ClaveSQL, MaquinaSQL, BaseDatosSQL, True)
Any idea, please?
Thanks in advance.

"What version of Crystal Reports are you using? 10,5 Version
What are you developing yoru application in? Visual Studio 2012."
This is where your problem is. Version 10.5 of the Crystal assemblies does not work with VS 2010 and above. You need to do the following:
1. Uninstall your current version of the Crystal development tools.
2. Download the "Install Executable" of CR for VS SP 9 from here: http://scn.sap.com/docs/DOC-7824
3. Install CR for VS.
4. Change all of the references in your project to point to the version 13.9.x assemblies.
-Dell

Active directory, SSGD and password change

Hi everybody, we have some problems with SSGD, active directory and password change
Scenario:
We have 2 different perfectly working Active directory called "Gruppo" and "Eracle";
We have 2 different tarantella installations called "Sgd" and "Tlv";
Sgd servers are working servers and users authenticate against Eracle, used by our customer.
We made 2 basic different test with Tlv:
1. we configure Tlv to authenticate users against Gruppo (that is our real need)---> we can't change pasword using kpasswd or ttakpasswd
2. we configure Tlv to authenticate users against Eracle ---> everything was ok
There are NO DIFFERENCE beetween Sgd and Tlv, they have same configuration, same krb5.conf etc..
There is ONE DIFFERENCE beetween Eracle and Gruppo:
Eracle Active Directory's properties:
Domain functional level: Windows 2000 mixed
Forest functional level: Windows 2000
Gruppo Active Directory's properties:
Domain functional level: Windows 2000 native
Forest functional level: Windows 2000
SSGD documentation doesn't speak about different Active Directory properties. The SSGD documentation says that you can authenticate users against Active directory, so, IT HAS TO WORK even if the domain functional level of active directory is different.
Can someone help us^Hi Simon
I'll try again to explain you our problem, because it seems that I wasn't so clear.
Scenario:
We have 2 different perfectly working Active directory called "Gruppo" and "Eracle";
We have 2 different tarantella installations called "Sgd" and "Tlv";
Sgd servers are working servers and users authenticate against Eracle, used by our customer.
We made 2 basic different test with Tlv:
1. we configure Tlv to authenticate users against Gruppo (that is our real need)---> we can't change pasword using kpasswd or ttakpasswd
2. we configure Tlv to authenticate users against Eracle ---> everything was ok
There are NO DIFFERENCE beetween Sgd and Tlv, they have same configuration, same krb5.conf etc..
There is ONE DIFFERENCE beetween Eracle and Gruppo:
Eracle Active Directory's properties:
Domain functional level: Windows 2000 mixed
Forest functional level: Windows 2000
Gruppo Active Directory's properties:
Domain functional level: Windows 2000 native
Forest functional level: Windows 2000
SSGD documentation doesn't speak about different Active Directory properties. The SSGD documentation says that you can authenticate users against Active directory, so, IT HAS TO WORK even if the domain functional level of active directory is different.
Can someone help us?
Many thank
Patrizia

Added question.
Do you guys know if changing the password will change the password on their Active directory access.
Thanks,
helmut

Linking to an OBIEE report without showing the user and password

Hi!
we are trying to access to an obiee report from an external portal (coded with php).
The idea is that the user clicks on a link an gets the report in pdf format. For that purpose we are using this url:
http://ttivobiee01:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criteria"."Key"&P3=1402&NQuser=user&NQPassword=pass&format=pdf
But this url is expossing OBIEE's user and password.
In order to avoid this security issue we tried to do an wget of the url but it doesn't return the report. Instead we get an html, which seams to download the report chunk by chunk (using javaScript).
The question is, is there any way that we could let our portal ussers access to an obbie report without expossing the user and password?
I have been looking into oracle forums and have found this: OBIEE Go URL with password protected
but we couldn't use this aproach due to security issues.
Thanks!
Nuria

Hi!
We have finally done this (and it works!)
<?php
$urlInforme='http://obi:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criterios"."Clave oficial"&P3=1402&NQuser=user&NQPassword=pass&format=pdf';
$ch = curl_init($urlInforme);
$ckfile = tempnam ("./", "CURLCOOKIE");
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEJAR, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$output = curl_exec ($ch);
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEFILE, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$fp = fopen("salida.pdf", "w");
curl_setopt($ch, CURLOPT_FILE, $fp);
$output = curl_exec ($ch);
curl_close($ch);
fclose($fp);

I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don't remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone.

How i said on the question. I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don’t remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone. I have the phone box and the bill. I sent you an email with my problem and attachments with the box informations, the bill and the reset request. What to do? You said to me:
Your request comes from an unrecognized email domain. Apple accepts email requests only from email domains for Apple-authorized carriers.
Please re-submit your request using your official carrier domain.
but this email is authorized, what to do??
respectfully, Beba

If you have forgotten then these links are the only way to resolve
http://www.apple.com/support/appleid/
As long as you have owned the iPhone from new and your Apple id is the one used to activate when new
OR have you recently purchased the iPhone secondhand ?

External Web Service - User and password in HTTP header

Hi!
How is it possible to add user and password in the HTTP header in a external web service call?
I have created a "Portal Service from WSDL file - Client side" with the wizard in SAP Developer Studio. I following the Java Development Guide - Web Service Security, and use the <i>secured service connection</i>. I have also created a new <i>System Landscape</i>, but should the new system be based on HTTP, my own PAR or what?
How can I check that the user and password is added to the HTTP header or the SOAP envelope? Do I have to scan http traffic with a proxy as Paros or can I find the request sent from SAP EP in the logs?
Cheers
Asle

Hello All,
I have been struggling a bit while putting a reasonable security framework on a jax-rpc style web service. I'm using JWSDP1.2 to set up the webservice. I've tried to outline my problem below. Please correct me where I'm wrong.
I've been through the Sun's WS tutorials, but they are not really clear on security. However, from them I surmised that there are two decent authentication techniques. HTTP Basic and mutual authentication (MA) . Both have their drawbacks though. HTTP Basic suffers from poor encryption while MA is a bit difficult to set up on both client and server sides. Another problem with MA is that there is no central repository for users/passwords.
OK, what I would really like to do is use my own user database to verify users/passwords i.e. use a HTTP Basic like authentication (but at application level) but run it over SSL for encryption. It seems simple, but is it possible?
Also, I have noted that when I use HTTP Basic on the service side, and use a java client, then setting username/password has no effect. In other words, I can always access the web-service, even with wrong username/password.
Sorry for the long post. Hope someone can help. Thanks.

HT1600 I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing? I am able to get the 'Home sharing' 'user and password on my Mac.

I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing?
I am able to get the 'Home sharing' 'user and password on my Mac.
Also using IPad 2 I am able to get the ITunes to accept the user name and same password as the Mac.
However, the only way I can see the 'Home sharing; icon is in Music on the Ipad. When I tap on the Icon it asks for a password.
When I give the same password, it is rejected.
Help!!!!
Jaxxdiggs

Personally I think the iOS devices are poor at reconnecting - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
Something along those lines anyway.
I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
AC

End user and password change

Similar Messages

Maybe you are looking for