End User Experience Monitoring Querries

Dear Experts,
I have a doubt in End User Experience Monitoring (EEM), I created a SAP GUI Script
that script  execute automatically every day. How to set automatically.
Regards
Balaji

Dear Experts,
I want to know the End user Experience Monitoring in the EEM Script how to assign the Region, Location,
then how to call the script.
Please give me provide solution.
Regards
Balaji

Similar Messages

  • Network traffic of an End-User Experience Monitoring (EEM) Robot

    Dear Experts,
    our company is currently using three EEM-Robots in different countries.
    After one month we noticed, that the network traffic of the robots is quite high (one robot used about 8 GB in one month).
    So I checked the configuration of the robots:
    Every Robot runs about five scripts, which are executed every ten minutes. Therefore every robot exectues 30 scripts in one hour.
    There are four SAPGUI Scripts and one http-script. Every Script (besides the http-Script) is collecting the system data (bold letters in the monitoring) and the trace level low (parameter trace.e2etracelevel = 0).
    So I start measuring the network traffic. I observed the connection with Wireshark:
    The robot uses in average 4000 Byte per second, which equates to 9,66 GByte for one month.
    After stopping every script and rebooting the robot, I measured the traffic again.
    The robot uses without executing a script in average 820 Byte per second, which equates to 2 GByte for one month.
    Are there some settings I overlooked, possibilities to decrease the network traffic? 
    Is that size of network traffic within the normal range?
    Regards
    Alex
    Edited by: Alexander Beck on Jan 11, 2012 10:57 AM

    Hi  Beck,      
    I am also working on End user experience monitoring.
    I want to in depth details in End User Experience Monitoring. If you have screen shots please share for me.
    Regards
    Balaji
    Edited by: Balaji Rao Bhoomraogari on Jan 18, 2012 12:19 PM

  • Recording NWBC scripts for End User Experience

    Hi Experts,
    I am recording NWBC scripts using the Netweaver Business Client GUI for loading and running it through Robots for End User Experience Monitoring. I don't see an option to "LogOff" in NWBC client while recording  the script. We only have option to "Close all session and LogOff" in NWBC client .
    When I am using this option, it closes all the sessions including the EEM Recorder also without saving the recording .
    I need to include "LogOff" as the last step so that it doesn't leave any active sessions for each run by different robots.
    I have a Solution Manager 7.1 SP10 and NWBC client 3.5 Patch 13.
    Please help me achieve this.
    Regards,
    Manish K

    Hi,
    for a browser the recommendation is to open a new, empty tab to keep the browser alive while closing the tab with the  session. All that with the hope that the backend will use the triggered event of collapsing tab to close session.
    Maybe a similar strategy works for NWBC.. but I don't know the UI in detail.

  • End-User Experience error running agent on windows server 2008 R2

    Hi,
    I have installed implemented the end-Uer experience agent in a Windows 7 without issues but when we have installed the SDM 7.30 agent and the SAP GUI 730 in a Windows server 2008 R2 and we have configured the agent as End-User experience monitoring Robot in solution manager.
    We have distributed one script without issues but the executios are failing with the message:
    "SAPGUI Compontent" could not be instantiated (sapfewse):605
    We have reviewed the bellow notes but wothout success:
    1261706 - Kill bits set for SAP GUI Scripting
    1092631 - Remote vulnerabilities in SAP GUI for Windows
    We are able to run the scripts in the server directly in the SAPGUI and even with the EemEditor.
    SAP message is open since last week, but my be you can provide a faster response.
    Could you please help me.
    Kind Regards

    Have you followed installation procedure described in the following article: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_install.html ?
    You can find troubleshooting hints in the following article: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_troubleshooting.html
    I'd reccomend to install CDA instead of AD agent (nice GUI...) but you'll have to create new (virtual) server for that: http://www.cisco.com/en/US/docs/security/ibf/cda_10/Install_Config_guide/cda_install.html

  • End User Experience Management(EEM)

    Does any one has insight information about SAP's End User Experience Management(EEM) in Solution manager vs CA's Customer Experience management?
    Please provide me relevant information.

    Please check this:
    Link: [http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/5093bee4-27f2-2c10-869e-e523d818f2e9&overridelayout=true]
    Regards,
    Gerald

  • End User Data Monitoring?

    A number of our users are exceeding their monthly data allotments. One user for instance is already at 18gig for this month alone. Many of the users are unaware of what might be causing this ridiculiusly high usage (for instance they aren't using streaming apps so the logical explaination of the overage isn't present).
    Has anyone had success with a data monitoring tool which can inform the users of what EACH APP is using? Having the breakdown of which app is using the most data is the key, overall usage is something easily handled via the carrier but that does not help us determine what is causing the excess usage.

    I have tried the Onavo app and I was told by their support it only displays the potential "data savings" not actual data used.
    We utilize an MDM agent which shows apps currently installed, this one particular user does have the Sirius XM app which I am sure is responsible for some of their usage however other users who are going over have only our MDM (which simply acts as a connector to exchange).
    Here's the email from Onavo
    MAR 03, 2013  | 02:12PM IST
    Hi,
    Thanks for reaching out.
    Firstly, we honestly apologize for the confusion. Allow me to try and explain:
    The "Saved XX of" parameter displays the POTENTIAL data saving and not the total. For example, an HTTPS (encrypted) connection or Streaming Data cannot be compressed by Onavo.
    Meaning, Onavo displays the amount of saved data ONLY for the apps that it can compress. All the reset are ignored.
    Unlike this parameter, the iOSs total number include all data that you consume.
    Hope that it helps.
    Best regards,
    Onavo Support Team
    http://onavo.com

  • End-user experience during CREATE OR REPLACE TRIGGER

    Is CREATE OR REPLACE TRIGGER intended for you to be able to update a trigger in production while users are actively using a that table's data?
    Just wondering how it behaves. People currently in the middle of an event will use the old trigger, while new requests will use the new one?
    Thanks
    Chuck

    Actually, this one kind of surprised me. I tried:
    SESSION1 > DESC t
    Name                                      Null?    Type
    ID                                                 NUMBER
    DESCR                                              VARCHAR2(10)
    SESSION1 > CREATE TRIGGER t_bi
      2  BEFORE INSERT OR UPDATE ON t
      3  FOR EACH ROW
      4  BEGIN
      5     :new.descr := UPPER(:new.descr);
      6* END;
    Trigger created.Then, in anothe session I did:
    SESSION2 > INSERT INTO t VALUES (1, 'One');
    1 row created.Then in the first session:
    SESSION1 > CREATE OR REPLACE TRIGGER t_bi
      2  BEFORE INSERT OR UPDATE ON t
      3  FOR EACH ROW
      4  BEGIN
      5     :new.descr := LOWER(:new.descr);
      6* END;
    Trigger created.
    Just to prove no commit happened
    SESSION1 >SELECT * FROM t;
    no rows selectedI was expecting to see
    ORA-00054: resource busy and acquire with NOWAIT specified
    or something similar. So in session 2 I did:
    SESSION2 > COMMIT;
    Commit complete.
    SESSION2 > SELECT * FROM t;
            ID DESCR
             1 ONE
    SESSION2 > INSERT INTO t VALUES(2, 'Two');
    1 row created.
    SESSION2 > SELECT * FROM t;
            ID DESCR
             1 ONE
             2 twoSo, the new trigger is working. Now change it again:
    SESSION1 > CREATE OR REPLACE TRIGGER t_bi
      2  BEFORE INSERT OR UPDATE ON t
      3  FOR EACH ROW
      4  BEGIN
      5     :new.descr := UPPER(:new.descr);
      6  END;
      7  /
    Trigger created.and back to session 2
    SESSION2 > INSERT INTO t VALUES (3, 'Three');
    1 row created.
    SESSION2 > SELECT * FROM t;
            ID DESCR
             1 ONE
             2 two
             3 THREESo, it looks like whichever trigger is current at the time of the insertion or updation seems to control what gets in the database.
    John

  • ESSO - Full SSO end-user experience

    Hi all,
    I have been testing Windows authenticator and Windows V2 authenticator and I have been unable to set it up so that it does not request the password when a user first logs into the system. Is it possible to set it up so that it does not show this authentication dialog in the first login? Any hints would be appreciated.
    Thanks in advance

    hello,
    to my knowledge, i think you won't be able to prevent (at least) your first authentication for the simple reason that when FTU is done, a key is generated to encrypt your credentials and this key is generated based on your authentication.
    For subsequent use, i've found out that you can prevent recurring authentication (apart from the reauthentication timer setting) by adding a key to the registry HKLM/Passlogix/AUI/<your authentication here>/CheckForParentProcess the type of the entry being DWORD and the value being 0.
    Of course it will still ask for authentication for "password reveal" feature (but still depending on the settings you specified).
    hope it helps.
    regards

  • How to monitor end user response times?

    Hi everyone.
    I'm using Oracle Enterprise Manager 10.2.0.5.0 for monitoring our development environment. We have many products but my focus is on a web application that is running on an Oracle Application Server. I need to monitor the reponse time of every HTTP request to check if this time is in the range of our SLAs.
    I've seen that OHS monitoring shows the mean response time, resource consumption, etc. But I haven't found any that lets me do more detailed monitoring (at the level o HTTP request).
    I'm reading right now 3 books about it but it does't mention this feature (just in case):
    - Middleware Management with Oracle Enterprise Manager Grid Control 10gR5
    - Oracle Enterprise Manager Administration 10.2.0.5 (from Oracle Library)
    - Oracle Enterprise Manager Grid Contro lInstallation And Configuration 10.2.0.5.0
    ¿Does anybody knows if Enterprise Manager have this feature?
    Thanks in advance.

    Hi.
    Sorry for a long delay.
    The answer was so generic and didn't help too much. But today, after several days of research I found how to monitor the user perceived performance by using "End-User Performance Monitoring". In theory this feature lets me register a Web Server and monitor its access log and also create a SLAs monitor based on it.
    Right now I'm reading a lot about it just and trying of enable it to an OHS. I did it for an Oracle Web Cache.
    Anyway, thanks a lot for your interest and if someone find it useful, when I get more functionality working, I'll post something here.
    Best regards.

  • Introducing the Microsoft Intune End User Enrollment Guide

    Help Your Users Get Their Devices Enrolled in Microsoft Intune with the End User Enrolment Guide
    Choosing how you manage mobile devices within your organization is just one of many steps involved in protecting your corporate data while enabling a great end user experience on the devices they choose.
    Now, you need to encourage your users to enroll their devices into Microsoft Intune to be managed. We’ve created the Microsoft Intune End User Enrollment Guide to help get you started. This two-page document helps explain to your users the importance of protecting corporate data, as well as their own, by letting your IT department manage their devices. It explains what may happen on their devices (installation of apps, security policies applied, etc.) and what will NOT happen on their devices (collecting personal information like phone and...
    This topic first appeared in the Spiceworks Community

    Depends which Guide you're looking at in 1.9.
    You can choose the Full Guide (in Standard or Classic) views, Channel Guide, Half Guide or Mini Guide.
    7xxx HD
    Full Guide Standard = 7 channels (hit Guide once)
    Full Guide Classic = 5 channels (available option in Television settings menu)
    Channel Guide = 7 channels horizontally (hit Guide twice)
    Mini Guide = really just one channel at a time (hit the down arrow on live TV)
    Half Guide = 6 channels (hit the up arrow on live TV)
    2500 / 6xxx / 7xxx SD
    Full Guide Standard = 6 channels (hit Guide once)
    Full Guide Classic = 4 channels (available option in Television settings menu)
    Channel Guide = 6 channels horizontally (hit Guide twice)
    Mini Guide = really just one channel at a time (hit the down arrow on live TV)
    Half Guide = 5 channels (hit the up arrow on live TV)

  • OIM approval -  End User Experiance

    Hello,
    In my configuration for OIM resource request :
    * 1st level of approval goes to manager -> user could login and check status of his request and could understands that it is pending on manager and verify his manager name in the request pending status. This is good. :)
    * 2nd level of approval goes the resource owner - (which is implemented as a group - the approval request goes to member of the group). What user sees is that the request is pending on the approval-group. He don't know whom to reach and eventually ends up talking to OIM admin to understand the current approver for the request.
    A valid use case is - in case resource approver changes then dynamically all the pending requests should move to the new approver. This works best in the current configuration (group member approval).
    How to enhance end user experience when the request is pending on 2nd approval step.
    thanks,

    But i don't think this will automatically re-assign the request to new approver in case of approver change.I didn't understand this line. What do you mean by Automatically Re-assign to new approver in case of approver change.
    How approver will get changed? Someone has to reassign the task to other person/group ?
    What is your Use Case ?

  • Monitor connected front end users

    Hi ,
    I have an application with access control list and table which holds application users / used for authorization etc ...
    at the database level I would like to see and know which session belongs to which fron end users!
    at the database level I can only see session id's and application's username which is htmldb_public_user.... and its unique for every user..
    lookin at Utilities>Database Monitor>Sessions page I can only see one developer connected! but cant see session or session id for front end users? is there anyway to find out the session info for this user?
    Thanks

    its the same question with a diffrence that he is trying to have diffrent applications login as diffrent username so he can trace applications individually(which is what im intrested in too) where as im more intrested in knowing the session id for each front end users who are viewing/inserting or deleting data through the applications! hope this makes sense!
    I dont undrestand below response!
    Bill,
    FYI, the engine does this for each database session:
    begin dbms_application_info.set_client_info(g_user); dbms_session.set_identifier(substr(g_user,1,(64 - length(g_instance)-1))||':'||to_char(g_instance)); dbms_application_info.set_module('APEX:APPLICATION '||to_char(g_flow_id),'PAGE '||to_char(g_flow_step_id)); exception when others then null; end;
    ...where g_user is the authenticated user, g_flow_id is the application ID, g_flow_step_id is the page ID, and g_instance is the Application Express sessionID. I don't know where to tell you to look for these markers but they will be associated with the database sessions that you're seeing which are owned by APEX_PUBLIC_USER.
    We are looking to move to a 4 RAC environment which is creating many questions concerning APEX architecture.
    I've seen all your other posts about this and IMO, there are no questions to be answered about the architecture of Application Express vis-a-vis RAC, and vice versa.
    Thanks
    Message was edited by:
    friendlier

  • Help! ADF default behavior rejected by end users...

    Hi,
    We have built an ADF 11g application during the past months. Last week we had our first user acceptance test with a small group of users. The users were very satisfied about the nice looks of the screens. But they had quite a lot of issues with the default behavior of ADF. I'll provide a list of the most important issues below. I hope more people here at OTN have experienced these issues and perhaps have some workarounds. And perhaps Oracle can use lists like this to improve the next version of ADF...
    <ol><li>Multi record edit<br>We have a lot of multi record edit screens. These are all editable tables. Those tables have the following problems:
    <ol type="a"><li>Whenever a partial refresh occurs, the whole table gets reloaded. This takes some time, which is uncomfortable. But the main problem here is that the table does not preserve the scroll bar position. The situation can be improved a little bit by setting the <tt>displayRow</tt> attribute to <tt>"selected"</tt> on the table. This will cause the table to show the selected record at the top of the view port after a refresh. But this still confuses the end users. In their experience the records are randomly jumping around.</li>
    <li>Records are not always inserted at the bottom. (In fact, they are inserted above the selected record.) End users simply expect records to be inserted at the bottom of the table, no matter what. And I can't disagree with them. Isn't there a setting to achieve this in ADF?</li>
    <li>Whenever the user navigates to another record in the editable table, all validation rules on the record he navigates from are fired. That means he cannot leave a required field empty to fill it later. The end users say this is very annoying. We would like to delay all validation until the user presses the Commit button. But as far as I know this is not possible, is it?</li>
    <li>The selected record position is not preserved on a full refresh. Our Commit button forces a full refresh of the page. This sounds like a sensible choice to me. However, users tend to click on Commit quite often. But after a full refresh of the page, the currently selected record in a record set is always reset to the first record in the set. In a large data table, this annoys the users very much. Isn't it possible to preserve the selected record over a full refresh?</ol>
    <li>Annoying validation errors<br>Many end users are annoyed by the somewhat "persistent" validation error messages. In a larger form or an editable table, users sometimes want to ignore an error and first enter other data, before correcting the error. This is hardly possible, because ADF sets the input focus to fields with errors and keeps popping up windows with a list of fields that have errors. We would like to make the validation less "aggressive". It is okay to give a field a red border if it contains an error. But leave the input focus where it is. And don't show any popup until the user presses the Commit button. And even then show the popup window only once.</li>
    <li>ADF BC caching and business rules in the database<br>We have some business rules in our database that automatically fill some fields with default values. We have e.g. a master-details relation, where a value in the master record is calculated based on the values of the detail records. We have set the calculated field in the master record to "refresh after update" and "refresh after insert". Sometimes the value of the field gets refreshed, but sometimes not. Users know that the field should be calculated by "the system", and are asking if they did something wrong if it doesn't. I know we could do the calculation in ADF, but our policy is to have all business rules in the database and to not repeat ourselves (DRY). Is there another way to guarantee that the calculated value in the master record gets updated after an update or insert of one or more detail records?</li>
    <li>Partial refresh loses data<br>If a field causes a partial submit to occur, fields in the same record that were not (partial) submitted before lose their data. This forces us to enable partial submit on all fields. But that causes a delay after moving the focus to the next field and validations to be fired too early.</li>
    </ol>
    I've numbered the items above, please use these number as a reference if you're posting an answer to a specific question.
    Please let me know any solution, even if it is only a partial solution. We've a nasty situation now. Our application is (nearly) finished, but it is blocked for production by the users because of the behavior of the ADF framework, on which we have very little influence. We can't blame the users for that, most of their criticism is fully justified. So we have to come up with a good solution for these issues before we can go to production. So any help would be highly appreciated!
    Best regards,
    Bart Kummel
    PS.
    We're using JDeveloper/ADF 11.1.1.1.0, we deploy to a WebLogic 10.3.1 server and we have an Oracle 10g database. We're using the full ADF stack: ADF Business Components, ADF Bindings and ADF Faces.

    Hi Bart,
    I can answer for few of your questions.
    Bart Kummel wrote:
    Hi,
    We have built an ADF 11g application during the past months. Last week we had our first user acceptance test with a small group of users. The users were very satisfied about the nice looks of the screens. But they had quite a lot of issues with the default behavior of ADF. I'll provide a list of the most important issues below. I hope more people here at OTN have experienced these issues and perhaps have some workarounds. And perhaps Oracle can use lists like this to improve the next version of ADF...
    <ol><li>Multi record edit<br>We have a lot of multi record edit screens. These are all editable tables. Those tables have the following problems:
    <ol type="a"><li>Whenever a partial refresh occurs, the whole table gets reloaded. This takes some time, which is uncomfortable. But the main problem here is that the table does not preserve the scroll bar position. The situation can be improved a little bit by setting the <tt>displayRow</tt> attribute to <tt>"selected"</tt> on the table. This will cause the table to show the selected record at the top of the view port after a refresh. But this still confuses the end users. In their experience the records are randomly jumping around.</li>You can set the fetchSize in the iterator to a minimum value (Say if you are displaying 20 records in the table at a time, you can set the fetchSize to 20, so that, it will fetch only 20 records at a time, and the remaining records on demand basis, i.e they will be fetched when you scroll in the table).
    <li>Records are not always inserted at the bottom. (In fact, they are inserted above the selected record.) End users simply expect records to be inserted at the bottom of the table, no matter what. And I can't disagree with them. Isn't there a setting to achieve this in ADF?</li>I suppose you are using the default createInsert operation. You can write your own method instead of the default createInsert, which would have something like
    public void customCreateInsert(){
    vo.last();
    vo.createInsert();
    }You can expose this method as method action and use it in place of default CreateInsert.
    <li>Whenever the user navigates to another record in the editable table, all validation rules on the record he navigates from are fired. That means he cannot leave a required field empty to fill it later. The end users say this is very annoying. We would like to delay all validation until the user presses the Commit button. But as far as I know this is not possible, is it?</li>You can set the immediate property to true for the column for which you want to skip the validation. However, the validation will fire when you submit / commit the changes (which is expected).
    <li>The selected record position is not preserved on a full refresh. Our Commit button forces a full refresh of the page. This sounds like a sensible choice to me. However, users tend to click on Commit quite often. But after a full refresh of the page, the currently selected record in a record set is always reset to the first record in the set. In a large data table, this annoys the users very much. Isn't it possible to preserve the selected record over a full refresh?</ol>Again, you can have a custom method, which would get the current row, commit the transaction and do a setCurrentRowWithKey to point to the last selected record after commit.
    <li>Annoying validation errors<br>Many end users are annoyed by the somewhat "persistent" validation error messages. In a larger form or an editable table, users sometimes want to ignore an error and first enter other data, before correcting the error. This is hardly possible, because ADF sets the input focus to fields with errors and keeps popping up windows with a list of fields that have errors. We would like to make the validation less "aggressive". It is okay to give a field a red border if it contains an error. But leave the input focus where it is. And don't show any popup until the user presses the Commit button. And even then show the popup window only once.</li>You can add a af:messages tag in the top and set globalOnly to true. Also, set the immediate property for the items to skip the validation when they tab out.
    <li>ADF BC caching and business rules in the database<br>We have some business rules in our database that automatically fill some fields with default values. We have e.g. a master-details relation, where a value in the master record is calculated based on the values of the detail records. We have set the calculated field in the master record to "refresh after update" and "refresh after insert". Sometimes the value of the field gets refreshed, but sometimes not. Users know that the field should be calculated by "the system", and are asking if they did something wrong if it doesn't. I know we could do the calculation in ADF, but our policy is to have all business rules in the database and to not repeat ourselves (DRY). Is there another way to guarantee that the calculated value in the master record gets updated after an update or insert of one or more detail records?</li>We need some more information. Do you see any "pattern" on which this things occur?
    -Arun

  • End User Role for Service Desk in Solution Manager

    Hey,
    I am launching the Service Desk functionality for my End Users. One thing that i want to know of is the role that I should assign my user in Solution Manager to access his message. E.g.
    I have a user 'A' who creates a message from any system in my landscape:Test, QA, Dev or Production. Now this message reaches in Solution Manager and is assigned to a certain Support Team according to the rules I defined. Now the personnel of Support Team needs some feedback from the end user who created the message. For that the user 'A' has to log into Solution Manager, access his message and enter the details which the Support Team requested.
    I want to know that what Role should i give to this user 'A' so that he is able to access ONLY the messages that he created i.e. "Reported by" field showing user 'A'; and is able to view and edit them.
    If I give him the role SAP_SUPPDESK_CREATE and SAP_SUPPDESK_DISPLAY, he is just able to see the messages, all of them, but is not authorized to edit any. Please help me out in this matter as i need a solution asap.
    Regards,
    Bilal Nazir

    Hi Nazir,
    Create a role and add this t-code manually.
    CRM_DNO_MONITOR - Transaction Monitor
    This is will definitely solve your problem.
    Feel free to revert back.
    Thanks and Regards,
    Ragu
    ERP,
    Suzlon Energy Limted, Pune
    Extn: 2638
    +919370675797
    I have no limits for others sky is only a reason

  • Bad user experience/errors with Adobe Air widget installation

    I'm having a nervous breakdown at work (it's 10pm and I'm
    still in the office), an Adobe Air widget application I've built is
    somehow causing the client to panic (they can't install or run the
    Adobe Air installation or the widget and now they feel all their
    users are having the same problem). If anyone has a minute to try
    this out and let me know if the widget installs correctly of if you
    have any recommendations on a better user experience I'll greatly
    appreciate it. The client is receiving an error message when
    installing Adobe Air (error 0 or something).
    widget is on the bottom left (installs for PC and Mac). If
    the widget installs without any glitches please let me know. God
    bless.
    http://stayonhermind.com

    The application installed just fine for me. I'm running
    Windows XP SP2 and I already have AIR 1.1 runtime installed.
    I do have a few suggestions for improvement though! Just take
    or leave any or all of these! :)
    In your popup you say,
    "Before installing the 9IX Rules Widget verify that
    you’re running the latest version of Adobe Flash."
    Is this really a necessary requirement? If you are
    downloading the .air I think it would not matter whether or not you
    have Flash installed.
    Then you say,
    "After installing Adobe Air (link below), return to this page
    and re-install the 9IX Rules Widget. Install Adobe Air Now .
    Otherwise click on the button below (the widget install button)."
    I understand you are trying to make this easy for people but
    to me this seems confusing.
    <GENERAL AIR COMMENT>
    If someone does not have AIR runtime already installed I
    thought running a .air would trigger the download and install. If
    not this gets pretty complicated. How do you test if they have AIR
    or not? And since most will not at this early stage how dow we
    educate end-users to even know if they have it or not?
    </GENERAL AIR COMMENT>
    You should digitally sign your AIR app so it does not say
    Publisher: UNKNOWN with the big red "?" icon!
    I would recommend against using all caps in your messages.
    I would recommend choosing a better font (maybe a pixel font)
    since the message text is a bit blurry.

Maybe you are looking for

  • How to make to_date fail if hour is not specified

    Hi, select to_date('2013-01-01','yyyy-mm-dd hh24') from dual; TO_DATE('2013-01-01 01/01/2013 00:00:00 I just want to make sure hour is specified, so the previous query should fail, but it does not. How can I make hour mandatory? Thanks to all. Edited

  • Help please with MCC4 car phone kit

    I have just bought a 2 year old car with a nokia MCC4 car kit, it does not fit my existing phone which is a 5210, can anyone please advise on which phone will fit the kit and whether I should or can upgrade the kit without ripping out the trim of my

  • How to install dictionaries in Thunderbird

    I can download the English Us dictionary under Mac OS but I cannot see how to install it.

  • Can I run Lightroom 4 under Windows XP

    I have downloaded a trial copy of Light 4 and on completeion It has told me it is not suitable for XP how do I convert please?

  • How to reseat processors

    All, I am having issues with my G5 dual 1.8 early 05 model (well, basically it won't boot anymore...) that i have described in another post (light on/off, spin noise, no chime, then fans full speed, then nothing). Took it to an Apple approved service