Enhanced Field is Blank - Debug with RSA3 - Unable to see the code in Exit

Hi all,
I have created a View on a table and created the Generic Extractor on that View and enhanced the Extract Structure to add a Amount field along with Currency Key. I have added the ABAP code to fill that new field. The same code has worked fine in Sandbox and copied the same into Dev. Everything worked fine and it populated the data into that enhanced field in Sandbox, but something is wrong in Dev. I have set the Break-Point after my Generic Extractor in the Exit's Include member ZXRSAU01 and tried to debug in RSA3, but it is not going there. Some how it is not recognizing the code in the User Exit. I am doing the same that I have done in the sandbox. Only initial values (0.00) are there in that field. That field is un-hided.
What could be the problem, please ?
Thanks in advance.
Regards,
Venkat.

HI Venkat,
Look at ur Datasource is Trancsaction Data or Materdata Attributes/Text.If it T.Data use Incled ZXRSAU01 or For Master Data attributes use ZXRSAU02 or Text
ZXRSAU03.
And Observe the Exit is Active or not and Debug the code once.

Similar Messages

I am unable to see the airplay icon on my macbook air, iphone or iPad which would enable me to use my Bose speaker through airplay. I set this up in the UK but have taken my macbook and bose speaker travelling with through Thailand. Ive wifi in my room an

I am unable to see the airplay icon on my macbook air, iphone or iPad which would enable me to use my Bose speaker through airplay. I set this up in the UK but have taken my macbook and bose speaker travelling with through Thailand. Ive wifi in my room and am able to access the internet on my laptop, Ive also been able to through the Bose Soundlink air wifi set application connect the bose speaker to the Wifi too.
I am only able to play my itunes through my macbook speakers and cannot find the airplay button which should be next to the volume slide once turned down to less than 1/3 of the volume..

Thanks for your help. Since I'm uninterested in loading all my photos (the only option) into photostream, I won't be able to use the settings in ATV. I guess I'm just stuck with using iPhoto on my MB Air. Thanks again.
paul

I have a Mac Pro running OS X 10.8.2. Frequently the system fails detect a CD. Doesn't seem to make a difference if it contains music or is blank. I am unable to eject the CD. The system just doesn't recognize that a CD has been loaded.

I have a Mac Pro running OS X 10.8.2. Frequently the system fails detect a CD. Doesn't seem to make a difference if it contains music or is blank. I am unable to eject the CD. The system just doesn't recognize that a CD has been loaded.

Step one, boot the new MBA into recovery mode (CMD+R on startup), launch Disk Utility, wipe the HD, and restore the OS. On reboot, use the Setup Assistant to do the migration. Details in Pondini's Setup New Mac guide.

I am unable to see the photos which i have taken with iPhone on the photostream option of ipad

I am unable to see the photos which i have taken with iphone on my ipad ( photostream features is not working). i have checked the settings of both devises and photostream of both is working.

Are you talking about older pictures you took before turning photo stream on? If so, they don't sync via photo stream. You have to sync them to a computer's itunes then sync to other device.

I work with Blackboard and the website is being changed with my updates, but I am unable to see the changes.

I use Blackboard, which is a platform for online teaching. I make updates/changes to the site, but I am unable to see the changes. This only happens with Firefox. How do I enable updates?

Reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"

When I try to use 'Stacked Column Bar'. with data assigned in the graphs, and want to see it in the 'Preview' mode in Xeclsius, I unable to see the graphs apart from the Axes ans Series Value, the graphs becomes totaly invisible why So ?

When I try to use 'Stacked Column Bar'. with data assigned in the graphs, and want to see it in the 'Preview' mode in Xeclsius, I unable to see the graphs apart from the Axes ans Series Value, the graphs becomes totally invisible why So ?

Hi Ranendra,
For basic understanding of Dashboards and Models you can use standard Templates or samples which ll come along with dashboard designer(Formly Xcelsius) installation.
For path File-->Templates(or Samples).
Under Templates you ll have different categories and for each you ll find the dashboard Templates.
Regards,
Venkat P

Before downloading the latest version of I-Tunes, I used to be able to view the ALBUM ARTWORK at bottom left when clicking on a song. I am now unable to see the artwork. Is it no longer possible with the updated software ??

before downloading the latest version of I-Tunes, I used to be able to view the ALBUM ARTWORK at bottom left when clicking on a song.
I am now unable to see the artwork.
Is it no longer possible with the updated software ??

Correct, Apple have removed that feature. However, you can still see the artwork of the song that's playing; it's shown in the Now Playing indicator at the top of the iTunes window. It is small, but if you click on it, a larger version pops up.
Also, in Albums View, you can see the album artwork.

Where to see the code of enhanced field

Hi experts,
there is field called ZZEDATU , for 2LIS_12_VCITM i want to see the coding for it where do i see
Thanks in Advance,
Nitya

Hi,
Thanks for your answers, Resolved my problem
Thnaks,
Nitya

Unable to see the values in detail block

Hello,
I have a master detail block, when I query the form, I am unable to see the values for a particular field(Column), all other columns appear properly in the details block, Upon checking the same table(s) in SQL ( by using the JOIN defined in the where clause of the relationship in Forms) , it shows the relevant records for all fields. So what could be wrong with the Form, please advise.
Thanks
FM

IQ wrote:
I have just checked the field its a non-database field which is being used as a LOV column to display a value derived from LOV. How do I make this populate at Query time, as obviously this works when the Form is in a insert mode but not for Query mode. How to make it work for Query ? As it for LOV column and non-database filed, ignore my first suggestion.
Does your non-database filed has associate any column ?
For example, you have SUPPLIER_ID (database column) and SUPPLIER_NAME (non-database column). SUPPLIER_NAME has LOV column. And when selecting supplier name from LOV value also assign at supplier_id.
Now to show supplier name when querying, you have to write POST-CHANGE trigger at supplier_id. like
SELECT ASSC_CODE INTO :MST_SUPPLIER.ACC_CODE
FROM ACC_SUB_SUB_CONTROL
WHERE ASSC_ID=:MST_SUPPLIER.SUPP_ASSC_ID;Hope this helps

Unable to see the pageviewer in a page from pages library in a custom page layout

<File Url="Inbox.aspx" Type="GhostableInLibrary" Level="Published" Path="myPages\Pages\Inbox.aspx" >
<AllUsersWebPart WebPartOrder="0" WebPartZoneID="Header" ID="inboxwp1">
<![CDATA[<WebPart xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/WebPart/v2">
<Title>Inbox</Title>
<FrameType>Default</FrameType>
<Description>Displays another Web page on this Web page. The other Web page is presented in an IFrame.</Description>
<IsIncluded>true</IsIncluded>
<ZoneID>wpz</ZoneID>
<PartOrder>0</PartOrder>
<FrameState>Normal</FrameState>
<Height></Height>
<Width />
<AllowRemove>true</AllowRemove>
<AllowZoneChange>true</AllowZoneChange>
<AllowMinimize>true</AllowMinimize>
<AllowConnect>true</AllowConnect>
<AllowEdit>true</AllowEdit>
<AllowHide>true</AllowHide>
<IsVisible>true</IsVisible>
<DetailLink />
<HelpLink />
<HelpMode>Modeless</HelpMode>
<Dir>Default</Dir>
<PartImageSmall />
<MissingAssembly>Cannot import this Web Part.</MissingAssembly>
<PartImageLarge>/_layouts/15/images/mscntvwl.gif</PartImageLarge>
<IsIncludedFilter />
<Assembly>Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c</Assembly>
<TypeName>Microsoft.SharePoint.WebPartPages.PageViewerWebPart</TypeName>
<ContentLink xmlns="http://schemas.microsoft.com/WebPart/v2/PageViewer">/_layouts/15/AppPages/InboxRedirectPage.aspx</ContentLink>
<SourceType xmlns="http://schemas.microsoft.com/WebPart/v2/PageViewer">URL</SourceType>
</WebPart>]]>
</AllUsersWebPart>
<AllUsersWebPart WebPartOrder="0" WebPartZoneID="LeftWP" ID="wpLeft">
<![CDATA[
<webParts>
<webPart xmlns="http://schemas.microsoft.com/WebPart/v3">
<metaData>
<type name="myWebParts.ProjectLinks.ProjectLinks, m, Version=1.0.0.0, Culture=neutral, PublicKeyToken=52f3214933d771f7" />
<importErrorMessage>$Resources:core,ImportErrorMessage;</importErrorMessage>
</metaData>
<data>
<properties>
<property name="Title" type="string">myprojectLinks</property>
<property name="Description" type="string">My Visual Web Part</property>
</properties>
</data>
</webPart>
</webParts>
]]>
</AllUsersWebPart>
<Property Name="ContentTypeId" Value="0x010100C568DB52D9D0A14D9B2FDCC96666E9F2007948130EC3DB064584E219954237AF390076F7B5D03DD146D699D042E1C5D76EF7" />
<Property Name="FileLeafRef" Value="Inbox.aspx" />
<Property Name="Title" Value="Inbox" />
<Property Name="PublishingPageLayout" Value="~SiteCollection/_catalogs/masterpage/myPageLayout/myPage.aspx, my custom Page Template"/>
<Property Name="ContentType" Value="myPageCT" />
<Property Name="_ModerationStatus" Value="3" />
<Property Name="FileDirRef" Value="Pages" />
<Property Name="FSObjType" Value="0" />
</File>
I have created a custom page layout in my site collec. using VS 2012 and deployed am able to see the page in the pages lib [inbox.aspx].
Here, I have added a page viewer web part and I want to redirect to another application page, which is already coded [inboxredirect.aspx] in my solution[its another dll - another SP solution which has appln pages and web parts
etc - ]
The issue is that, i am unable to see the page viewer web part when the page is displayed. inbox.aspx is a page which is created once my custompagelayouts solution is deployed and when i navigate to this page, i am stuck . i am getting
the " access denied " message is displayed.
can anyone help why this error is displayed?
in my inboxredirect.aspx page i am inherting from unsecuredlayoutspagebase class, so i dont think , access denied message should come.
using System;
using System.Configuration;
using Microsoft.SharePoint;
using Microsoft.SharePoint.WebControls;
namespace myproj.Layouts.AppPages
public partial class InboxRedirectPage : UnsecuredLayoutsPageBase
string projectName = string.Empty;
protected void Page_Load(object sender, EventArgs e)
string siteUrl = SPContext.Current.Web.Url;
using (SPSite site = new SPSite(siteUrl))
using (SPWeb web = site.OpenWeb())
string urlProjectName =Request.UrlReferrer.ToString();
projectName = urlProjectName.Split('/')[5];
//end
SPUser user = web.CurrentUser;
if (user != null)
above is my appln page to which i am redirecting.

Solved it myself guys... (Well the major part)
Got help from here...
https://www.nothingbutsharepoint.com/sites/devwiki/articles/pages/blank-open-save-dialog-when-browsing-document-library-from-office-clients.aspx
and
http://www.sharepointconfig.com/2011/02/vs2010-list-definition-template-missing-file-dialog-view/
with some tweaks of my own..
Still working on it because its showing SharePoint 2010 header... And I need 2013 look...

Unable to see the uploaded file using gos object

Hi Experts,
I uploaded the file to server by using the below code. But I am unable to see the uploaded file. Please help me out hot to view the uploaded files (list the file name and view the content) (i want to upload the file by getting the url as input and by clicking the button)
Code to upload the file.
DATA: wa_zqtc_gos_request TYPE zqtc_gos_request.
DATA: l_attachment        TYPE swo_typeid.
DATA: lo_gos_service      TYPE REF TO cl_gos_document_service.
obj-objkey = req_num.
obj-objtype = objtype.
CREATE OBJECT lo_gos_service.
CALL METHOD lo_gos_service->create_attachment
    EXPORTING
      is_object     = obj
    IMPORTING
      ep_attachment = l_attachment.
I tyied with this to view the files but the attachement link is disabled. (i want to view the files by clicking the icon-GOS icon in tool bar)
DATA: wa_zqtc_gos_request TYPE zqtc_gos_request.
DATA: l_attachment        TYPE swo_typeid.
DATA: lo_gos_service      TYPE REF TO cl_gos_document_service.
obj-objtype = objtype.
obj-objkey = req_num.
CREATE OBJECT manager
    EXPORTING
      is_object = obj
    EXCEPTIONS
      OTHERS    = 1.
Please help me out how to view the file and list.
thanks & regards
T.Tamodarane
Edited by: T.Tamodarane on Oct 23, 2009 9:55 AM
Edited by: T.Tamodarane on Oct 23, 2009 9:56 AM

Hi,
Please post ur thred below:
PL/SQL
Regards
Meher Irk

Unable to see the application in BPM Workspace for Sales Quote tutorial

I have created the Sales Quote tutorial steps and deployed the process. The Enter Quote Details user task is in the "SalesRep" role and I have assigned a user from WebLogic user store to "SalesRep" role in the BPM Organization artifact.
In order to kick off the process, I logged-in to BPM workspace with the user I have assigned as "SalesRep" role but don't find the Sales Quote application under the "Applications" tab.
I am using 11g PS4(11.1.1.5) and didn't seed the demo users, instead just created the user using WLS console.
Any thoughts why the user is unable to see the application in BPM Workspace?
Thanks,
Satya

Check two things:
1. Login to Workspace as weblogic and click the Administration link at the top to verify the role is actually set to a user (just to double check this).
2. Login to EM, click the SalesQuote composite, scroll down and click the EnterQuote human task component, and click the Administration tab.
This shows you if there is a task form URI associated with this human task. If not, the initiate link won't show up in the Applications menu in Workspace.
If not, you can either deploy again from JDeveloper, making sure you have selected the task forms in the deploy wizard and making sure the deployment is successful in the Deployments log window.
Heidi.

Unable to see the deployed application in BPM Workspace

Hi Every body,
We have developed the Project using Jdeveloper and it has deployed successfully. After that I login in Workspace with assigned user, I could't find the deployed application.
In Enterprise Manager I checked it shows it has deployed and I checked in in workspace login as a weblogic user and seen the assigned role,it has assigned currectly but I am unable to see the deployed application in BPM workspace. Can any body help on this.
Thanks in advance.

Hi
Try this. Log into the Workspace using weblogic user. Go to the Administration option (up and right if I'm not wrong) and check if the roles that you create for the process has the users correctly assigned.
Regards,
isabelbernely

Unable to see the Hyperion tab in Excel 2003

Hi Hyperion gurus,
Can anybody shed light on an issue that a user encountered with Smartview? This user installed Smartview and had been using it without any problems. We just started parallel testing and he needed to use Smartview as part of the process. He is now unable to see the add-in in Excel 2003. He has no Hyperion tab and we cannot find any evidence that it has been installed. We reinstalled Smartview but even after reinstalling Smartview he is still unable to see the Hyperion tab in Excel. What is puzzling is that he does have the Hyperion tab in Word and is able to connect.
Would appreciate any help provided? Thanks.

I have seen the same exact problem at my company regarding the missing Hyperion tab in Excel (but present in MicroSoft Word). If you go into Excel, then select 'Help', then About MicroSoft Excel, then you'll see 'Disabled Items'. Scan the list for HSAddin.Dll. If this is on the list, highlight it, then select the 'Enable' button. (this is my first suggestion). I've also had to do the following in some isolated cases:
You should also try re-registering the following 3 SmartView DLL files. To do this, simply locate where these 3 files are stored on your local machine (the file names are):
HSAddin.dll
HSSpread.dll
HyperionSmarttag.dll
Usually these are stored within the following path: C:\Hyperion\Smartview\bin
To Register the files:
Open DOS (start->run->cmd) and change your path to C:\Hyperion\SmartView\bin
Type in the following, hitting enter key after each line:
regsvr32 hsaddin.dll
regsvr32 hsspread.dll
regsvr32 hyperionsmarttag.dll
You should receive a 'success message' for each file you register. Reboot your machine following this, and go back to Excel. Your menu should now be in place.
Thanks,
James Pryal

Unable to see the portal content directory in content adminstration

Hi,
I am unable to see the portal content directory in the content administration. I am not the super administrator.I have been assigned content admin role. But, I am unable to see the PCD.I see from previous blogs that permission has to be set for my role.
Can any one help me in telling the procedure to set the permission.If permission is not the issue then do tell me the solution for it.
Suganya

Hi Suganya,
The content admin role normally is sufficient to see / read the portal content catalogue (as far as the standard settings are concerned). But maybe they have been restricted on your implementation by some administrator.
Some with sufficient permissions on the portal content catalogue has to right-click on the root (portal_content) object, "open", "permissions", and has to provide at least administrative "read" permission to you, some role (content admin for example) which is assigned to you or some group you belong to.
Hope it helps
Detlev
PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

Enhanced Field is Blank - Debug with RSA3 - Unable to see the code in Exit

Similar Messages

Maybe you are looking for