Enhanced receiver determination - Idoc 2 Idoc scenario

Hi,
I am trying Enhanced receiver determination - in an Idoc 2 Idoc scenario.
But when I selected Enhanced receiver determination in ID, it is asking for interface mapping.As it is an Idoc 2 Idoc scenario, I did not create any mapping objects in IR.
Is there any round about for this.
reg,

Hi,
if you are planning to send the Idoc to two systems then you do not need Enhanced Recieevr Determination.
You can add multiple Receivers In the receiver Determination under Configured Receivers and now the same idoc will be sent to 2 receivers.
Like mentioned by moorhty, Enahnced Receievr Determination allows you to dynamically determine receivers using a mapping program.! I dont think that is needed in your case
Regards
Bhavesh

Similar Messages

Enhanced receiver determination and value mapping

I want to use enhanced receiver determination functionality in my scenario.
I couldn't see any message interface or data type under http://sap.com/xi/XI/System.
we are on Sp08 nw04s and SAP BASIS 7.0 software component in IR.
I don't want to hard code my business service name in mapping.How can I achieve this?
Thanks,
Rekha.
Message was edited by:
Rekha Lather

Hi,
> couldn't see any message interface or data type under http://sap.com/xi/XI/System.
we are on Sp08 nw04s and SAP BASIS 7.0 software component in IR.
After upgradation to SP08 on NW04s , did you reimport the SAP BASIS Component into your IR? Ask your basis admin team to reimport the SAP basis Component into the IR.
>I don't want to hard code my business service name in mapping.How can I achieve this?
Similar discussion available in the comments section of this blog,
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
Would suggest you use value Mapping.
Regards
Bhavesh

PI 7.3 receiver AAE idoc scenario-No receiver comm channel found in ICO

Hi,
I am working in PI 7.3 receiver AAE idoc scenario.When I try to configure Integrated Configuration(ICO),I am not able to see the receiver comm channel in receiver agreement.
What is the reason for this??I have configured the communication channel,but still its not shown in reciver agreement dropdown.
Please help.
Regards,
Sriparna

Hi Sriparna,
In PI 7.3 there is are two separate IDoc adapters: "standard" IDoc adapter and one that is dedicated for AAE (ICO). Make sure that you have used the right one - most probably not, which is why you cannot see the channel in the dropdown list.
Hope this helps,
Grzegorz

Interface Determination under Enhanced Receiver Determination Scenario

Hi,
One of the very basic assumption for Enhanced Receiver Determination is that Receivers are found at run time, and one of the such requirement is that we don't know about Receiver Business System at the time of configuration.
Now for such scenarios, how do we configure "Interface Determination". For Interface Determination one of the input filed is "Receiver Service/Party", in addition to "Sender Service/Party" plus "Sender Interface"
Since we don't know Receivers at config, what value(s) should come in "Receiver Service/Party" in Interface Determination at config time.
Thanking all of you in advance

Hi Rajan,
You have to do the following things:-
First, maintain Database Table in SAP XI. Which contains several keys like Sender, Receiver system and then according to that key combination we perform a JCO call and fetch the values which gives us the correct receiver and interface.
Create a Data Type which will be having Two elements Service And Interface.
Now careate a message type and message interface for this data type. This will be for your receiver.
Then use source payload and perform a message mapping between Sender Payload & this Message Type.
Use UDF and make a JCO call and fetch table entries for service and interface.
Then in Directory perform extended determination and use this mapping into it. The result will be Service & Interface.
Thanqs
Biplab

Enhanced Receiver Determination in Synchronous Scenario

Hi,
my synch scenario with standard Receiver determination is working fine.
the service interfaces i used are SI_OutSynch_EmpInfo_Request and SI_InbSynch_EmpInfo_Provide.
I am now trying to apply enhanced Receiver determination for the same synch scenario.
For this, in ID, in my Receiver Determination object i selected the radio button Extended, then it is asking for an operation mapping. infact it is asking for an OM with sender Interface=SI_OutSynch_EmpInfo_Request (from my swcv) and Receiver Interface = ReceiverDetermination (from SAP BASIS swcv)..
So I logged into ESR, and created an OM_test_EnhancedRD, with sourceInterface=SI_OutSynch_EmpInfo_Request (from my swcv) and TargetInterface = ReceiverDetermination (from SAP BASIS swcv)
But when i tried to activate the OM_test_EnhancedRD, it is not getting activated, and giving below error:
Interface modi are different. Source interface Operation SI_OutSynch_EmpInfo_Request | http://mycomp.com/myns is synchronous. Target interface Operation ReceiverDetermination | http://sap.com/xi/XI/System is asynchronous
So my queries are:
1. is for synch scenarios, if receiver information is part of the request payload, how can we apply the extended Receiver Determination, so that the Receiver is determined dynamically.
2. or is there any synch version of ReceiverDetermination (from SAP BASIS swcv) available.
thanks in advance.
madhu.

in this case, does SAP provide synch version of ReceiverDetermination SI, so that we can use that in OM for enhanced Receiver Determination.
If you have a look at the blog-reference given by Ravi you will find a way on how to make the ReceiverDetermination Si synchronous or work with the same async SI.....for quick reference below is the way mentioned in the blog:
From the blog:
Option 1:
A quick and easy way to allow for synchronous enhanced receiver determination setup is to circumvent the check that prevents
a synchronous interface to be matched to an asynchronous interface in an interface mapping. This can be done simply by
manually entering the name and namespace of the ReceiverDetermination interface object (e.g. 'ReceiverDetermination'
and 'http://sap.com/xi/XI/System' respectively) for the target/receiver interface in the interface mapping, but leaving the value for
the Software Component Version empty.
Option 2:
Select Modify and then change the mode to synchronous. Since a synchronous interface requires an input message as well, you
can reuse the Receivers message type used in the output message - it doesn't really matter as long as some message type is
used.
Both of the above options are available under the Applying the Workarounds section of the blog
Regards,
Abhishek.

Enhanced Receiver Determination for synchronous interface.

Hello!
Was anyone faced with the Enhanced Receiver Determination? When I try to create
the definition of the Interface Mapping, I get the error:
"Interface modi are different. Source interface Message Interface MI_My_sync_iface | urn:my is synchronous. Target interface Message Interface ReceiverDetermination | http://sap.com/xi/XI/System is asynchronous"
Thank you.

Hi ,
U can go through below limks :
Illustration of Enhanced Receiver Determination - SP16
SAP NetWeaver Process Integration: Enhanced Receiver Determination for Synchronous Scenarios
Enhanced Receiver Determination in SAP XI - Exchange Infrastructure - Wiki
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/enhanced%2breceiver%2bdetermination%2bin%2bsap%2bxi
Thanks

Problem with Enhanced Receiver Determination

Hi Friends,
I am doing the enhanced receiver determination scenario, But it is giving the
error in SXMB_MONI like this
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
<SAP:P1>Problem while determining receivers using interface mapping: Fehler beim Parsen der Empfänger-Liste.Länge des XML-Dokuments 264</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when determining the receiver: Problem while determining receivers using interface mapping: Fehler beim Parsen der Empfänger-Liste.Länge des XML-Dokuments 264 Problem while determining receivers using interface mapping: Fehler beim Parsen der Empfänger-Liste.Länge des XML-Dokuments 264 Fehler beim Parsen der Empfänger-Liste.Länge des XML-Dokuments 264 System expected the element 'Receivers'</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
this is error is coming in the SXMB_MONI
THE DATA type(Receivers) we create in basis component is comes automatically?
are we have to create?
in my scenario i creted manually,
is it compulsory to specify the properties for the party and agency?
is it compulsory to create 2 Receiver structures in msg structure?
if yes what r those, actually i used from sap.help.com,
Can any body should give me the solution for this, regarding mapping and configuration , if anybody experienced this scenario. Pls . give me the guidelines to do.

Hi,
the mapping creating the receiver list is not producing the required element "Receivers" from Namespace "'http://sap.com/xi/XI/System". Look to the operation mapping given in the enhance Receiver Determination (IB Directory) and detect the corresponding mapping program (ESR). Copy the source payload from MONI, test the mapping program and correct it.
Regards,
Udo

PI 7.1 - Parameter in enhanced receiver determination

Hello experts,
I am working on PI 7.1.
I defined a scenario where I am using an enhanced Receiver determination to determine the list of target services thanks to an operation mapping and its related message mapping. I'd like to pass a constant value from this receiver determination to use it in the message mapping.
To do so, I set an import parameter in the operation mapping and the message mapping and made the needed binding.
I can then see this parameter in the receiver determination, but I can not put a constant value in it and then activate my configuration..
Do you know why ?

Hi
I have not used this feature yet, however I dont think that this is a bug.
the Parameterized mapping feature is for ID->OM->MM & not for RD.
more info
http://help.sap.com/saphelp_nwpi71/helpdata/en/43/bbb7fd90f5332ee10000000a11466f/frameset.htm
/people/jin.shin/blog/2008/02/14/sap-pi-71-mapping-enhancements-series-parameterized-message-mappings
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/909e33f0-738c-2a10-4f87-ce73398bcf08
Regards
Vishnu

Enhanced Receiver Determination in PI7.1

Hi,
We have a requirement where in we have to use the Enhanced Receiver Determination for one of our scenarios for choosing the receiver.We are on PI7.1.
As of now,we have mapped a constant rcvr(Test_Supplier) to the Service in the message mapping from our source to the target -Receivers, as we do for Enhanced Receiver determination.The rcvr determination choosing Extended and the correct Operation mapping has been configured.The coresponding Interface determination and Receiver agreements have also been configured.
When trying to test this by posting a payload through RWB,we get the No_Receiver_Case_Async error.
Is it necessary to map the party field also in the message mapping?Am I missing something here?Kindly advise.
Thanks and Regards,
Induja

When trying to test this by posting a payload through RWB,we get the No_Receiver_Case_Async error.
Is the Mapping which you developed to determine the receiver(s) able to give the appropriate output? Apart from cache problem, this can also be the issue when the mapping does not produce i.e. no proper service is populated in the corresponding node....the service must be actually present (and active) in ID
Regards,
Abhishek

Problem while determining receivers in enhanced receiver determination

i am doing scenario FILE-TO-FILE (with one sender and 2 receivers, dynamic receiver identification based on mapping)using enhanced receiver determination,
it is giving following error in MONI,
Problem while determining receivers using interface mapping
System expected the element 'Receivers'
pls. help me if anybody experienced this scenario,
i am doing this scenario based on the below blog.
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16

Have u properly followed the weblog,
Integration Repository Step No 2 and Step No 5
2. In order to use the enhanced receiver determination, create a message mapping which has the target message as Receiver Determination in the SAP BASIS --> http://sap.com/xi/XI/System.
5. Create the Interface Mapping 
U must have checked that ur Xi is on SP 16 or above )
Regards,
Prateek

Enhanced Receiver Determination with RFC Lookup

Hi All,
I am building an interface with Enhanced Receiver Determination. Scenario would be that the Receiver Systems would be stored in a Z table in SAP ECC, and in PI Receiver Determination I am doing an RFC look up to find the systems, and using those.
I built the mapping for Receiver Determination, and it tested fine in ESR. But while Creating the Receiver Determination in Integration Directory, After I specify the Receiver mapping name, and put the RFC channel name for the RFC parameter, it doesnt allow me to save the Receiver Agreement with a run time error message
"Link from Receiver Determination | <Sender>| <Interface>| * | * to object type "Channel" with role "122474913b1311deaadb42057dd8b002" is not permitted"
My question is a) if the RFC lookup allowed in the mapping for Receiver Determination?
B) if yes, am I missing someting or is it a system issue?

i have seen Enhanced RD with lookups that work. Have to say it was not a RFC lookup used but rather a DB look in one of the implementations i had worked with. But still I really dont think a RFC lookup should be an issue.
Troubleshoot the lookup mapping to be working other than in the enhanced RD (i.e independently) .
if you head no where, i suggest opening a OSS note.

Regarding Enhanced Receiver Determination

Hi Experts,
I go through the Blog
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
In this i am not getting the Source Msg Structure And Target Msg Structures
Can any one Give me a LOOK at this Structures Please..............
Regards
Khanna

Hi,
>>>>Can u Explain me in detailed what is the use of SAP BASIS 6.40 here.
What is the necessary in this scenario.
Why should we create Receiver et in the SAP BASIS.
>>>>SAP BASIS 6.40 here.
you can get required message type from it
>>>>Why should we create Receiver et in the SAP BASIS.
no need as it's already there (the message for receiver det)
Regards,
michal

Problem in enhanced receiver determination

hi all
I was doing enhanced receiver determination in that i got following problem
at first i copied abstract interface ReceiverDetermination from SAP BASIS to my component then i created my mapping program containing one udf related to my scenario.I also created one interface mapping but when i went in the directory then
my this mapping is not coming when i have to choose it after clicking to extended receiver determination in receiver determination.
my objects are already activated in design.the udf is also working properly.
Please reply. This is an urgent issue.

Hi-
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/43/a5f2066340332de10000000a11466f/content.htm

Error in enhanced receiver determination

Hi Experts,
I am trying to implement a scenario in which i have to get the receivers at run time by doing a lookup to a file which stores the destinations.
i am getting the error that no receivers could be determined.
thanks,
Anika

hi,
you r trying to impliment Lookup for the file adapter which is not synch in nature and hance u r not getting the responce back.
please find the link which deals with how to impliment lookup for file adapter.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file%252blookup%252bin%252budf.
now once u get rhe runtime receiver u can perform enhanced receiver determination (write a simple UDF)
regards,
navneet.

Purpose of Enhanced Receiver Determination

Hi
i go thrown the some sap help link .. But I did't understand.. so, can any of you plz explain the what is the purpose of the Enhanced Receiver determination..
for this.. in mapping side does we need to do any special things.. or for a normal scenario also.. can we use this..
I want to use this Enhanced Recever determination in my scenario.. for that what are the steps i need to follow..
Regards
Babu

Hi !
Enhanced Receiver Determination:
You use an enhanced receiver determination to have a mapping program determine the receivers of the message dynamically at runtime. Instead of creating the receivers in the receiver determination manually, you assign a mapping to the receiver determination and this returns a list of receivers at runtime.
http://help.sap.com/saphelp_nw04/helpdata/en/43/a5f2066340332de10000000a11466f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/frameset.htm
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
also check this
Please Check
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/a5f2066340332de10000000a11466f/frameset.htm
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/frameset.htm
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
Also check ....
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/a5f2066340332de10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/frameset.htm -
>Enhanced Interface determination.
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination --->Customised XPath
Also check the following threads
Enhanced Receiver Determination
Enhanced Receiver Determination synchronous
/people/robin.schroeder/blog/2006/11/15/using-dynamic-receiver-determination-with-sync-interface
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
List of receivers can be dyamically determined and assigned at runtime using enhanced receiver determination .
have alook at thses URl's also
http://help.sap.com/saphelp_nw04/helpdata/en/43/01322a7af25285e10000000a1553f7/frameset.htm
:Dynamic file and variable substitution
Similarly Extended Receiver determination is used to determine the receiver at runtime.
Refer my reply:Re: Condition In Receiver Determination Not Working
enhancement in ID
Enhanced Receiver Determination:
You use an enhanced receiver determination to have a mapping program determine the receivers of the message dynamically at runtime. Instead of creating the receivers in the receiver determination manually, you assign a mapping to the receiver determination and this returns a list of receivers at runtime.
http://help.sap.com/saphelp_nw04/helpdata/en/43/a5f2066340332de10000000a11466f/content.htm
Enhanced (Mapping-Based) Interface Determination
In an enhanced interface determination you do not enter the inbound interfaces manually, but instead first select a multi-mapping. You get the inbound interfaces from the target interfaces of the multi-mapping. The inbound interfaces are determined at runtime during the mapping step.
You typically use an enhanced interface determination if the source message has an element with occurrence 0 ... unbounded (for multiple items of a data record) and you want multiple messages (for the individual items) to be generated at runtime.
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/frameset.htm
Thanks

Enhanced receiver determination - Idoc 2 Idoc scenario

Similar Messages

Maybe you are looking for