Enhancement for FB03

Hello Experts,
I have a requirement for enhancement to Tcode FB03. In header data of the document we have field name
entered by (i.e. usnam).In this field when the user press F4, then it should show the username and contact details in a pop-up window .
Can any one help me if there are any USER-EXITS or BAD's or if there are any other solution.
Regards,
Ramesh Kodavati

Thanks Arindam.
But the end user is using portal.He can't open another session.
Thant's why he wants in the same screen.
Is there any other solution like changing the BKPF table and adding the
search help for the field USNAM in BKPF table.If it works or not please tell me.
Regards,
Ramesh Kodavati

Similar Messages

Enhancement for t.code FBRA

Hi,
I tried using user-exit F050S006. i inserted a break-piont in the exit and executed transaction code FBRA but control doesnt go to this exit. please help me out in finding an enhancement while executing FBRA.
Regards,
Sonali.

hi,
check this
Enhancement
F050S003                                FIDCC2: Change IDoc/do not send
F050S002                                FIDCC1: Change IDoc/do not send
F050S001                                FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
SAPLF051                                Workflow for FI (pre-capture, release for payment)
RFKORIEX                                Automatic correspondence
RFEPOS00                                Line item display: Checking of selection conditions
RFAVIS01                                Customer Exit for Changing Payment Advice Segment Text
F050S004                                FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005                                FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006                                FI Outgoing IDoc: Reset Clearing in FI Document
F050S007                                FIDCCH Outbound: Influence on IDoc for Document Change
F180A001                                Balance Sheet Adjustment
FARC0002                                Additional Checks for Archiving MM Vendor Master Data
FEDI0001                                Function Exits for EDI in FI
Business Add-in
FI_FB08_SUBST_BUDAT                     FB08: Check Posting Date for Reversal of FI Doc. with FB08
FI_GET_INV_PYMT_AMT                     BAdI for determining the payment amount for an invoice
FI_HEADER_SUB_1300                      Screen Enhancement for Document Header SAPMF05A
FI_PAYREF_BADI_010                      BAdI: Payment Reference Number
FI_RES_ITEM_CURRENCY                    Document of Residual Item with Invoice Currency
FI_TRANS_DATE_DERIVE                    Derive BKPF-WWERT from Other Document Header Data
BADI_ENJ_ALT_ADR                        Go to alternative vendor/customer data
BADI_F040_SCREEN_600                    Screen Enhancement on F040 0600 Document Header
BADI_FDCB_SUBBAS01                      Screen Enhancement 1 on FDCB Basic Data Screen (010, 510)
BADI_FDCB_SUBBAS02                      Screen Enhancement 2 on FDCB Basic Data Screen (010, 510)
BADI_FDCB_SUBBAS03                      Screen Enhancement 3 on FDCB Basic Data Screen (010, 510)
BADI_FDCB_SUBBAS04                      Screen Enhancement 4 on FDCB Basic Data Screen (010, 510)
RFESR000_BADI_001                       BAdI for Own Processing of POR Item
BADI_FDCB_SUBBAS05                      Screen Enhancement 5 on FDCB Basic Data Screen (010, 510)
BADI_MIRO_SPLT_ADD                      Append additional fields of ACCVS to ACCIT
BADI_PRKNG_NO_UPDATE                    BAdI for Deactivating Update of Parked Documents
FVFZ                                    Replacement for Function Modules of Function Group FVFZ
INVOIC_FI_INBOUND                       BADIs for Inbound IDoc INVOIC FI (Vendor Invoice)
F050S008                                FIDCC1, FIDCC2 Inbound IDoc: Update Comparison Ledger
AC_QUANTITY_GET                         Transfer of Quantities to Accounting - Customer Exit
ADJUST_NET_DAYS                         Change to Net Due Date
FBAS_CIN_LTAX1F02                       Tax interface
FBAS_CIN_MF05AFA0                       EWT - Downpayment Clearing - Tax transfer for CIN
FISPLIT                                 Online Split: Cash Discount, Exchange Rate Differences
FI_AUTHORITY_ITEM                       Extended Authorization Check for Document Display (FB03)
FI_DOC_DISP_LI                          Diversion to Document Items (FB03)
Yogesh N

Screen Exit for FB03 TCODE

Hi All,
I need to enhance the Standard SAP FB03 screen by adding an custom pushbutton. Kindly can some body help me in finding Screen Exit.
I have searched for User Exits for FB03 in SMOD but could not find out an exact one.
If any body has step by step Screen Exits document - that would be a great help me.
Thanks a lot for help.

SAPLF051               :-                 Workflow for FI (pre-capture, release for payment)
RFKORIEX               :-                 Automatic correspondence
RFEPOS00              :-                  Line item display: Checking of selection conditions
RFAVIS01                :-                Customer Exit for Changing Payment Advice Segment Text
FEDI0001                 :-               Function Exits for EDI in FI
FARC0002               :-                 Additional Checks for Archiving MM Vendor Master Data
F180A001                :-                Balance Sheet Adjustment
F050S001                :-               FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002                :-                FIDCC1: Change IDoc/do not send
F050S003                :-                FIDCC2: Change IDoc/do not send
F050S004                :-                FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005                :-                FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006                :-                FI Outgoing IDoc: Reset Clearing in FI Document
F050S007                :-                FIDCCH Outbound: Influence on IDoc for Document Change
OR
U GO SE80
AND WRITE REPORT NAME RFBUEB00 OR SAPMF05L
THEN
IN TREE SELECT SCREEN
AND CHEK SCREEN EXIT

Suggest EnhanceMent For SALES area determination In stock Transfer.

Suggest EnhanceMent For SALES area determination In stock Transfer.
V02V0001 Sales area determination for stock transport order Doesnt Work,

Is user exit required, as the sales area will be different. Incase of Intra company stock transfer the process will be as under:
Create Purchase Order (ME21N)
Create Delivery in background (VL04, VL10a, VL10C, etc)
Change Delivery for picking / packing & PGI (VL02n)
Create Billing Document (VF01)
Assumption: Stock Transfer configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
Incase of Inter-company, the process will be as under:
Create Sales Order (VA01)
Create Delivery (VL01N, etc)
Change Delivery (VL02N)
Create Billing Document (VF01)
Assumption: Configuration is in place. Assistance can be taken from SAP Best Practices in help.sap.com
Regards,
Rajesh Banka

Badi / Exit / Enhancement for replacing INSMK during PO creation

Hi Gurus,
we want to default the INSMK field (stock type) during Purchase Order creation..
Can someone help me findind the right BAdI / exit / enhancement for it?
Thanks in advance,
Regards,
Alessio

Hi Alessio,
You may check these first:
Re: Negative postings to MVER table
Re: select stock type
Thanks,
Gordon

I need the drivers of EDR Enhanced for LabVIEW 8.6 or more, please.

Hello, I want to acquire a signal with the microDAQ-Lite of EAGLE Technology and I need the EDR Enhanced LabView Driver. The one I have is for labview 6.x or 7. Currently I am working in Labview 2010 so I am needing the drivers for this version. I have found in a webpage (http://edr-enhanced-for-labview.software.informer.com/8.5/ ) that a version developed by National Instruments for version 8.5 exists, it says it is free, but i cant find it. Does anyone knows if a newer version exist? or where can I find the latest one?? Please help.
Thanks in advance.
Alejandra

NI does not develop drivers for third-party DAQ devices. Contact the vendor or use the driver you have. You can load version 6 and 7 into LabVIEW 2010.

Implicit enhancement for report painter reports(For GRR3 and CJE3)

Hi,
We have a client requirement to add 5 fields (In selection screen) to report painter reports ( Reports of CJE3 and GRR3 ).We created Z reports as a copy of standard reports, added required 5 fields by implementing SAP notes and other settings.We have also done implicit enhancement for all these reports to make change in the behaviour of new fields.This is working fine in the development client but the problem is once we transport this to other client new reports get generated( With new name ) and implicit enhancement will be lost.
For eg:in development client for CJE1/CJE2 report the program name will be "GPAVPSATWFP4NN0YRDBIQBHI8MQ"
but when we transport it to other client new program "GP8O1UCNZTJYY5LTO8GN0UW2GQB" is generated in which implicit enhancements are not found.
Can you please suggest how to handle implicit enhancement in such cases? Or what is the correct way to transport it.
Thanks in advance
Regards,
Shekhar

Hi,
Thanks for the quick reply..
I have already done implicit enhancement as you said ,my problem is to transport it to another client.
I have implemented implicit enhancement for one report lets say it as "ABC", and i transport it to another client with all the enhancement. But in another client new program "XYZ" is getting generated for same report( dynamic programs ), so my implicit enhancement is present but its applicable to "ABC" program but not for "XYZ".
Can you please suggest how can i handle this??
thanks in advance,
Greeshma.
Edited by: Accgreeshma on Jan 23, 2012 3:04 PM

Implicit enhancement for report painter (CJE2 & GRR3 reports)

Hi,
We have a client requirement to add 5 fields (In selection screen) to report painter reports ( Reports of CJE3 and GRR3 ).We created Z reports as a copy of standard reports, added required 5 fields by implementing SAP notes and other settings.We have also done implicit enhancement for all these reports to make change in the behaviour of new fields.This is working fine in the development client but the problem is once we transport this to other client new reports get generated( With new name ) and implicit enhancement will be lost.
For eg:in development client for CJE1/CJE2 report the program name will be "GPAVPSATWFP4NN0YRDBIQBHI8MQ"
but when we transport it to other client new program "GP8O1UCNZTJYY5LTO8GN0UW2GQB" is generated in which implicit enhancements are not found.
Can you please suggest how to handle implicit enhancement in such cases? Or what is the correct way to transport it.
Thanks in advance
Greeshma.

Hi,
Thanks for the quick reply..
I have already done implicit enhancement as you said ,my problem is to transport it to another client.
I have implemented implicit enhancement for one report lets say it as "ABC", and i transport it to another client with all the enhancement. But in another client new program "XYZ" is getting generated for same report( dynamic programs ), so my implicit enhancement is present but its applicable to "ABC" program but not for "XYZ".
Can you please suggest how can i handle this??
thanks in advance,
Greeshma.
Edited by: Accgreeshma on Jan 23, 2012 3:04 PM

Enhancement for F110

hi,
Can u please specify the particular enhancement which triggers between payment proposal and payment run.
Requirement:
I need to capture the username who performs the payment proposal and check with the same whether the same user is running the payment run....
Rgds.,
subash

FDTAX001 Enhancement to Transaction FDTA (event after the downlo
FEDI0002 Function exits for EDI DOCS in FI - Incoming pyt adv.no
FEDI0003 Function exits for EDI docs in FI - Save PEXR segments
FEDI0004 Function exits for EDI docs in FI - particular events
FEDI0006 Function Exits for EDI-docs in FI: Save IDCR Segments
RFFOX003 Frame for user exit RFFOX003 (in program RFFOM100)
RFFOX041 Framework for user exit RFFOX041 (in program RFFOBE_I)
RFFOX042 Framework for user exit RFFOX042 (in program RFFOBE_E)
RFFOX043 Framework for user exit RFFOX043 (in program RFFOBE_D)
RFFOX061 Frame for user exit RFFOX061 (in program RFFOCH_P)
RFFOX062 Frame for user exit RFFOX062 (in program RFFOCH_P)
RFFOX063 Frame for user exit RFFOX063 (in program RFFOCH_P)
RFFOX064 Frame for user exit RFFOX064 (in program RFFOCH_P)
RFFOX065 Frame for user exit RFFOX065 (in program RFFOCH_P)
RFFOX066 Frame for user exit RFFOX066 (in program RFFOCH_P)
RFFOX071 Frame for user exit RFFOX071 (in program RFFOCH_U)
RFFOX072 Frame for user exit RFFOX072 (in program RFFOCH_U)
RFFOX073 Frame for user exit RFFOX073 (in program RFFOCH_U)
RFFOX074 Frame for user exit RFFOX074 (in program RFFOCH_U)
RFFOX075 Frame for user exit RFFOX075 (in program RFFOCH_U)
RFFOX081 Frame for user exit RFFOX081 (in program RFFOF__T)
RFFOX082 Frame for user exit RFFOX082 (in program RFFOF__T)
RFFOX100 Frame for user exit RFFOX100 (in program RFFOUS_T)
RFFOX101 Frame for user exit RFFOX101 (in program RFFOUS_T)
RFFOX102 Frame for user exit RFFOX102 (in program RFFOUS_T)
RFFOX103 Frame for user exit RFFOX103 (in program RFFOUS_T)
RFFOX104 user exit
RFFOX105 Frame for user exit RFFOX105 (in program RFFOUS_T)
RFFOX200 Frame for user exit RFFOX200 (in program RFFONZ_T)
RFFOX210 Frame for user exit RFFOX210 (in program RFFOAU_T)
RFFOX211 Frame for user exit RFFOX211 (in program RFFONZ_T)
RFFOX230 General program for user exit RFFOX230 (in program RFFO
RFFOX240 Enhancement for User Exit 240 (RFFOAT_P)
RFFOX250 Enhancement for User Exit 250 (RFFODK_E)
RFFOX901 Framework for user exit RFFOX901 (in program RFFOM100)
RFFOX902 Framework for user exit RFFOX902 (in program RFFOM100)

F-48- Downpayement related to downpayment request and enhancements for PO

Hi to all,
Is there anyone that can explain me why in F-48 transaction, when I make a downpayment related to downpayment request, in the subsequent screen the fields are filled with the value retrieve from previous screen ( in which I selected the downpayent request related to DP I'm posting) all fields except the purchase order field that remains NOT filled ("space" ). So it should be filled by the user. I was asked to find a substitution in order to make this field automatically filled with the correct value without the user needs to fill it manually . The problem is that purchase order field seems to be related to another field called LPN (Long Procuerement Number ). Anyone can suggest a suitable enhancement for substitution ?
Thanks in advance...
Andrew

Thanks Tejas sir, AND VV sir,
Sri Problem resolved. But sir, we want while F-47 payment request special GL Indicator A in both case in F-48 too.. spl GL Indicator A only. while doing the same thing getting error.. see the error Below.
Special G/L indicator A is not defined for down payments
Message no. F5053
Diagnosis
The specified special G/L indicator is not classified as "down payment" or not listed in the list of the target special G/L indicators for indicator "F".
System Response
The entry is not accepted.
Procedure
Enter an allowed special G/L indicator or initiate a change of the default settings.
Kindly help me sir.
Thanks
Pranav Kr. Gupta
Note: i will give u the point. as well sir.

Question about "Enhanced for loop"

public class NewLoopTest{
     public NewLoopTest(){
          int result=0;
          int[] a=new int[20];
          for(int i=0;i<a.length;i++){
               a=i++;
          for(int i:a){
System.out.println("i="+i+";"+"a["+i+"]="+a[i]+";result="+result+"+"+i+"="+(result+i));
               result+=i;
          System.out.println("-------------");
          result=0;
          for(int i=0;i<a.length;i++){
               System.out.println("i="+i+";"+"a["+i+"]="+a[i]+";result="+result+"+"+i+"="+(result+i));
               result+=i;
This code counts sum of the elements of a array.
At first I use the enhanced for loop and at second I use the traditional for.
Enhanced for loop in sdk1.5 returns only even elements of array, am I right?

Enhanced for loop in sdk1.5 returns only even
elements of array, am I right?No. It covers them all.
The i in the enhanced for loop is not the index. It's the element at the current index. You don't have access to the index in the new loop because you don't need it.
for (int item : arr) {
    System.out.println(item);
// is equivalent to
for (int ix = 0; ix < arr.length; ix++) {
    int item = aa[ix];
    System.out.println(item);
}The i in your new loop is the same as a [ i ] in the old loop.

Documentation Enhancer for Java

Documentation Enhancer for Java is a tool that enhances Javadoc files by enriching them with new information. The information is gathered by statically analyzing the corresponding Java class files. This tool enhances the Javadoc HTMLs in three respects: semantic information, sorting, and navigability.
http://www.alphaworks.ibm.com/tech/docenhancer?open&S_PKG=&S_TACT=103AMW61&S_CMP=GR&ca=dgr-awjw03docenhancer

First of all, can you explain what do you exactly mean by "is there a java api for java?"
About the second part of your question, if the desired file format is CSV, then you can use StringTokenizer class that by reading each line of your file, makes tokens based on some delimiter that you specify (space, tab, etc.) and then in each line, you have to concatenate each pair of tokens with a character ";" between them. However as I know, you cannot have text decoration (Bold, Italic, etc) with CSV format

Exit/BADI/Enhancement for Payroll driver

Dear Friends,
When we run transaction pc00_m10_calc for US payroll driver for an employee for a period,we can see the renumeration statement in the output screen.
I need to modify the internal table xrt to add the similar wage types in one period before it passes to form , which exit / BADI enhancement should for this purpose.
Pls. advice.
Thanks..
Regards,Prashant

Hi,
    Please check the below.
Enhancement
HRUSRCU0                                Enhancement for Customer Exit for RPCTRCU0.
Business Add-in
PC10_PAY0001                            User exit for base_wages in a gross up calculation
PC10_PAY0002                            Exit to determine if negative taxables should be allowed
PC10_PAY0003                            Exit to determine if distribution calc should be allowed
PC10_PAY0004                            Work Tax Area Override Add-In: Activation
PC10_PAY0005                            Work Tax Area Override Add-In: Default proration of wages
PC10_PAY0006                            User exit for additional ESS W4 (PZ10) fields; before output
PC10_PAY0007                            User exit for PZ10 and IT0210 fields; after input
PC10_PAY0008                            More than 99 exemptions for US payroll withholding tax calc
Regards,
Srini.

Enhanced for-loop by java5 needs to be more enhanced?

Hi, all of you,
I often need to iterate a collection. Sometimes I need to iterate a subset of a collection. Then I have found the enhanced for-loop is not enough.
Before Java 5, you did the following:
for(int i=0;i<collection.size();i++) {
Object object = collection.get(i);
doSomething(object);
}Thanks to Java 5, you can do the following:
for(Object object:collection) {
doSomething(object);
}However, before Java 5, I have the flexibility to skip the first two lines by purpose, as follows
for(int i=2;i<collection.size();i++) {
Object object = collection.get(i);
doSomething(object);
}What should I do the same thing with Java 5?
Kind regards.
Pengyou

pengyou wrote:
JoachimSauer wrote:
masijade. wrote:
uncle_alice wrote:
Or, if the collection is a List: for (Object obj : theList.subList(2, theList.size())) {
doSomething(obj);
Ah, yeah, I keep forgetting about that. ;-)
Actually, I just never think about it. ;-)I think you're not alone. I find that subList() is severly under-used. It simplifies a lot of operations (ever tried someList.subList(0, someIndex).clear()? Try it).The solution is nice except it might throw IndexOutOfBoundsException.Which probably means a bug somewhere else. The way to avoid runtime exceptions is to write code that doesn't put you into situations where they'll arise, not to avoid them being thrown

Picture enhancement for GeForce 7600 on Qosmio G30-188?

In the manual of my brandnew G30-188 there is on page 8-31 a picture with a menue called Toshiba picture enhancement for Geforce 7300. It is described that you can change the settings for the Video and TV-picture. But on my G30-188, which has the GeForce 7600 I dont find any Toshiba picture enhancement menue.
Can someone help out?

The 7300 is in some machines and this section applies to this. There is no windows based enhancement tool for the 7600 (I have one in my Qosmio) but you can alter settings in the Qosmioplayer by going into the setup screens directly (F1 or F2 I think.
Hope this helps

Enhancement for FB03

Similar Messages

Maybe you are looking for