Enhancement section does not visible at runtime

I created enhancement section in SAP standard program, activated it but it does not visible at runtime. How do I make it available? Thanks!

Hi Anthony,
Have you implemented Implicit Enhancement?
Once code is activated without error there is no other step required.
Refer [Enhancement|https://wiki.sdn.sap.com/wiki/display/ABAP/ThenewEnhancementFrameworkandthenewkernel-basedBAdI] for more information.
Regards
Shital

Similar Messages

HCM P&F - Attachment section is NOT visible for the approver

Hi
Attachment possible in the process but after submission (with attachment), when approver opens the process, attachment section is not visible to them. We are using FPM forms.
Appreciate your inputs.
Thanks

Thanks Chris,
let me clarify.....
I want that when a user click on "Back to Author" button, do_operations should trigger
Your below part is really what what I want....
"Now if you expect that when the user clicks "back to author" that you can "catch" that in your "do operations", then that is very wrong. "Do Operations" only gets triggered by the started "check", "user_event_check" and your "user events" set up as such. Things like "back to author" or "withdraw" are handled within the application itself.You would have to modify/enhance that in order to "catch" the "back to author" button press event."
Any help on how to achieve this functionality would be greatly appreciated.
Chohan

Value attribute not visible in runtime collection

Hi,
I have created some 2-3 value attributes (display only) in a standard model node for BTDOCFLOW (which also contains some display only fields). Put in the logic in their Getter methods and fields are getting displayed in UI with the values.
Now, my requirement is to display this table view (Assignment block) in default sorting based upon one value attribute and one model node attribute. But the problem here is, I am unable to find value node attribute at runtime in BTDOCFLOW collection at DO_PREPARE_OUTPUT. (Even display only standard context node attributes, which are not part of model node structure are not visible)
I have re-defined method GET_TABLE_LINE_SAMPLE with the value attributes, resulting in enhanced rv_sample line, but still the value attribute is not visible at runtime in the collection.
Can someone pl. tell me, how can I display my value attributes in collection along with model node attributes, so that I can do default sorting based upon one custom and one model node attribute.
Thanks,

Hi,
Whne you define value attributes within the model attribute then the node becomes mixed instead of either value node or model node.
So you need to access the mixed node and then should access model attributes and value attributes separately.
Get your collection into a normal entity then assign the entity to mixed node
DATA: lr_mixed TYPE REF TO cl_bsp_wd_mixed_node ,
            current TYPE REF TO if_bol_bo_property_access,
             lr_current TYPE REF TO cl_crm_bol_entity.
     current ?= me->typed_context->entity name->collection_wrapper->get_current( ).
      lr_mixed ?= current..
      lr_current ?= lr_mixed->if_bsp_wd_ext_property_access~get_model_node( ).
Best Regards,
Dharmakasi.

Interface mapping Object does not exist in runtime cache

I am getting the following error after importing IR into our test system (PI7.0 SP10).
Interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 does not exist in runtime cache Exception of class CX_XMS_SYSERR_MAPPING
You want to execute interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 .     However,the data of this interface mapping is missing in the runtime cache. Activate the interface mapping in the Integration Repository.
I cannot change the mapping and reactivate - as this cannot be changed.
I have run SXI_Cache, Cleared SLD caches on IR and ID and run cacherefresh=full, but no luck!
The mapping is there and I can test it in the IR.
Any thoughts?

I had this problem today, maybe this helps someone when searching about this (at least this is the first hit at a very big search engine when searching for interface mapping does not exist...)
I have a RFC => PI => File scenario. I was aware that this would need to be asynchronous so I set up the message interface (service interface for PI > 7.0) as asynchronous inbound. This is the file receiver part of the interface.
Hints on the error: Audit Log in message details of RWB showed a line like this: RFC adapter received sRFC for ZMY_FM from <sender SID>/<sender client>. Attempting to send message synchronously. This of course could not work as file is asynchronous by default.
Bottom line however was, to make the call of the sender RFC asynchronous by using "in background task" like so:
CALL FUNCTION 'ZMY_FM'
   IN BACKGROUND TASK
   DESTINATION 'PI_DEST'
   EXPORTING
     t_file = lt_file.
COMMIT WORK.
Don't forget the commit work here.
Hope this helps.
Cheers
Jens

"shared" section does not show up in the itunes window

I'm trying to use Home Sharing on iTunes but the "shared" section does not show up on the left hand side of the screen where it should be, so now I cannot use home sharing. Help?

It doesn't show up until you go to the iTunes Advanced menu and select "Turn on Home Sharing".

Report header section does not print all pages

Hi,
I have a custom report that consists of all 3 parts. it has a header section, main section, and a trailer section.
I have a problem in a header section that it does not print all pages. It only gives the output of the first page and the last page for the header section.
I open the .rdf file with oracle reports 6i .
what do i need to check please?

Please refer the following thread:
http://oracle.ittoolbox.com/groups/technical-functional/oracle-dev-l/report-header-section-does-not-print-all-pages-4166062

Step type section is not visible in workflow builder.

Hello Friends,
Step type section is not visible in workflow builder even though I am in change mode. How to make it visible.
Cheers,
Senthil

Hi,
I in workflow builder ucan see three dropdown box in the left side of your screen. In that the third listbox you click to get the Step Types..
thank You.

Interface Mapping does not exist in runtime cache

Hi,
I have a scenario of RFC to SOAP, when I do the test I get the error message "Interface mapping http://sapxi.xxx.co.za/XXXXXX/ InterfaceMapping_Name does not exist in runtime cache"
Regards
Scharlotte

Hi...
Try to re-create the Interface mapping.
And also test your Configuration with test tool where you can find the error on which step.
if the error found in interface mapping.. do re-create the interface determination step and receiver agreement.
Provide the payload which is taken from sxmb_moni --> Inbound msg --> Payload
u can follow this blog for how to test configuration part:
Test Your XI Configuration With The New Test Tool
Regards,
Parvathy

Error : Interface mapping does not exist in runtime Cache

Hello Guys
I have a simple SOAP-To-RFC connection which was working fine until recently. I have not made any changes
but the data is not getting transfered from one point to another.
I checked SXMB_MONI and saw the following error:
Interface mapping http://cincom.com/config AddConfig does not exist in runtime cache
Then I went and checked SXI_CACHE and it says 'Cache contents are upto date' with a green light.
Just to be on the safer side, I shutdown and restarted XI server selecting All tasks.
But still has the same problem.
Can some one help me with this? I would really appreciate it.
Thanks
Ram

Hi,
We too faced the same problem.
Do the following
1) Delete the Interface mapping and re-create it
2) First test your Config with test tool
/people/paul.medaille/blog/2005/06/24/test-your-xi-configuration-with-the-new-test-tool
I think here you will find the error on Interface mapp or Receiver agreement
Then delete the interface det and receiver agreement also and re-create those.
Make sure that u have provided the sample payload which is taken from MONI--Inbound msg--Payload
Then finally u will get the success
Regards
Seshagiri

Trying to download image files into lightrrom 5 on an imac running 10.8.5. Works fine with camera roll section but Icloud section does not appear as source in lightroom. How to access?

Trying to download image files into lightrrom 5 on an imac running 10.8.5. Works fine with camera roll section but Icloud section does not appear as source in lightroom. How to access?

You need to sync them in iTunes and download them there, then simply open them from the folder where they are stored in other programs.
Mylenium

Enhancement not visible during runtime

Dear experts,
I have a problem with getting enhancements up and running in runtime.
I Changed 2 enhancements in FM J_1B_NF_VALUE_DETERMINATION and activated them. Activation goes fine, but for some reason during runtime (in debug mode), I can not see the code of the enhancement at all. My changes are not triggered, I can not even see the code in debug-mode. The complete code-block is missing. It seems that the enhancements are not active and are just not embedded during runtime. Do I have to activate something else? I guess CMOD and SMOD are not relevant in this case but if they are please let me know.
Thanks in advance
William

if you are usng enhancement framework then there is no need of CMOD/SMOD.
where have you created your enhancement spots? and what type have you given there?
goto SE19 and see what actually is the status of the enhancement .. if active, keep breakpoint directly inside your enhancement coding,
when FM starts executing, you will find a circular swirl(just on the left side of the code ), that mean it will goto your enhancement. it wont direcly show in the deugger, you press F5 and then it will go inside your code.

Firefox feedback section does not work in firefox 6 or other browsers with a more sane update schedule

I tried to post this in the feed back section but it does not appear to be working in firefox version 6.
I have been working with computers for 30 Years, used Firefox since version 1.0 recommended it through websites that I develop and for people that I work with - I am afraid that will be coming to an end unless you guys stop the nonsense.
I do not like how you assume I want a new version very 6 weeks.
There is no clear documentation of the changes for each release. I Do not have time for this – it should be simple – it’s not -
There is no way to know why my add-ons are disabled with every update. And I have a basic vanilla system with a Java Console Broken, Kaspersky URL Advisor – Broken – vendors are going to stop supporting the Firefox browser if you break their code every time there is an update – and if I was them I would – this is the second time this has been broken in 6-months.
WTF - Can't you guys just write a patch or fix a security problem without a version change and breaking everything? I want stable and secure - that appears to have stopped with Firefox version 3.6
I know it’s free but there is a ton of free software I choose not to run because it is crap -

<< I Tried to post it through this link -
http://input.mozilla.com/en-US/feedback#sad
There was no visual clue that it took the feedback - just sat on the screen with my information in the text box. >>
The same thing happens with me.

Enhancement view does not appear in my list of views

Hi ,
I have created an enhancement and now I used the wizard to add a new view to this application.The view created does not appear in my list of views but it appears in my Z BSP application.
Please help!
Regards
Shilpi

Check whether you are in Enhanced Version of UI Component ! (Original UI CMP name and Enhanceset : Z*)
Thanks
Allot points if this helps !

Edge animation does not visible on Business Catalist

HI,
I made a simple Edge animation, published as .oam and placed in Muse, when previewing in browser form Muse, the animation is visible, when publishing to Business catalist, it is invisible and Button with ! Report Abuse apears where the animation should be. What is the reason, what am I doing wrong?

Home
This is the url, currently still in progress stage, however it would be nice to be able to see the animations in this stage all ready if not, wont be able to use them at all.
Animations is not visible on any of my browsers- mozilla, safari, chrome
I'm not an expert in code - reason for using muse and edge
Animation should be on page SPECIFICATION

Enhancement object does not exist for enhancement implementation

Hi Experts,
When i tried activating my implementation, i got the sujected error. any kind of inputs will be very helpful. This is an existing implementation and was last changed in October, I just wanted to added few more changes to that.
Here is the long description of the problem.
Diagnosis
An enhancement implementation xxxxxxxxx was delivered to customers, but the enhanced object YYYYYYYYYY does not exist in the system. The corresponding record does not exist in Table .
This can have different reasons:
The enhanced program object YYYYYYYYYY belongs to a different software component than the enhancement and this software component was not relevant for delivery.
An error occurred during system setup so that the enhanced object YYYYYYYYYY was not imported.
The enhancement implementation xxxxxxxxx is obsolete and the enhanced object YYYYYYYYYY has meanwhile been deleted or copied. As a result, there could be enhancement implementations in the system that have not been adjusted or that have incurred an error during deletion or renaming.
Procedure
Contact your system administrator and try to clarify the problem - if necessary, with SAP's help.

Hi Reddy,
1) Please go through the enhance implementation of that. 2) Check whether any thing activation is missing.3) Check the implementation class. It is better to understand if you explain for which badi you are using.
Regards,
Madhu.

Enhancement section does not visible at runtime

Similar Messages

Maybe you are looking for