Enhancement to standard WD component are not reflecting in other systems.

A few months back, an SAP consultant created a couple of enhancements to the web dynpro component DPR_DET_DATA_TASK_O for CPROJECT in ECC (the SAP consultant is no longer available).
The first enhancement transported fine to our quality system
The changes on the transport for a second enhancement did not reflect on our quality system.
Transport did not show any errors.
None of the objects are local objects.
¿Does anyone have any idea of the cause of this problem o what I should be looking for?
Thanks in advance.

Hi,
I've had occasions where texts have not been correctly shown after a transport, and have had to manually regenerate (activate) the WD component in the test/prd systems - when I did that the texts then showed.
Hope this helps,
Chris

Similar Messages

  • Standard business contents are not installed in BI system

    I am new to SAP Basis Team,  Consultants are saying  that standard business contents are not installed in BI system. What package should I install or what is the steps I should Do. Following is the content of SAINT
    FINBASIS  --  600             -- 0013   -- FINBASIS 600 : Add-On Installation
    PI_BASIS  -- 2006_1_700   -- 0006  -- Basis Plug-In (PI_BASIS) 2006_1_700
    SAP_BW  -- 700                -- 0017  -- SAP NetWeaver BI 7.0
    SEM-BW   -- 600               -- 0013  -- SEM-BW 600 : Add-On Installation
    ST-A/PI     -- 01K_BCO700  -- 0000  -- Servicetools for other App./Netweaver 04
    ST-PI        -- 2005_1_700    -- 0006  -- SAP Solution Tools Plug-In

    I'm not on a 7.x system ... but on my 3.x system, the component BI_CONT is for the business content data.
    Brian

  • Changes are not reflecting in other users

    HI all it's urgent
    One user abcd who had made some changes is not reflecting to other users after transport, we have 2 clients 100 and 200 ,changes are reflecting in own user id ,we transported with scc1 transaction
    with regards
    vinod

    Dear Vinod,
    Can you explain what did you try to do ? what changes do you make ?
    Dimitry

  • After transport changes are not reflecting to other users

    HI all it's urgent
    One user abcd who had made some changes to some screens is not reflecting to other users after transport we have 2 clients 100 and 200 changes are reflecting in own user id we transported with scc1 transaction
    with regards
    vinod

    I am not a developer, so pardon me if I misunderstood this question. I thought screens and other repository objects are client independent. That means the change should be evident in all clients without a need to transport.
    Is this to do with security by any chance ( though it seems unlikely )? Can the other users see the change in the original client in which the request was made? That should help you determine whether the problem lies with the transport or outside. Also you can check the contents of the transport in SE01 and see if it holds the kind of data that you are expecting it to. I am guessing you have already generated the screen after saving the changes.
    Hope this helps,
    Sanket

  • Changes are not reflecting on same system for WD Component

    Hi ,
    I have one interesting issue , I have done some changes in Webdynpro component , changes are reflecting for some users but not reflecting for some other users on the same system. Can anyone tell me why it is behaving like that ?
    In R/3 I have faced this issue , this is one option of GENERATE via this I have resolved this issue but how i will do it here?
    Thanks
    Ankesh Jindal

    I am not sure if i understand your real problem here.
    It could be very well related to Personalization and Customization.
    Go to SICF transaction and then
    sap/bc/webdynpro/sap/wd_analyze_config_user

  • Smartforms : CHanges in one language are not reflecting in other languages.

    Hi
    I did some changes to the smartforms in language en and was trying to see the effect in other client in language de. But dont see any changes in other language.
    Changes that i did were, Changing the text in the forms, addition of new fields, set some conditions to text.
    Hope the problem is clear.
    Please help.

    After doing changes in the German Form in transaction SE63, the changes do not reflect in English language after activating the german form.Please help me with your valuable suggestion to solve this problem.
    Regards
    Ankur Godre

  • Service request fields enhanced through AET are not reflecting in BW DS

    Hi All,
    the CRM developer has added 3 service request fields to crmd_orderadm_h, crmd_service_h via AET. He has marked all the 3 fields as 'BW reporting relevant'.
    I have now checked the BW extractors in the hope that these 3 fields will now be appended to the BW service request datasources automatically.
    But instead of adding the fields to service request datasource(0CRM_SRV_REQ_INCI_H)(BUS2000223), it added the 3 custom fields to process datasource 0CRM_SRV_PROCESS_H.
    I am not sure what exactly have gone wrong . Is there a way to get these custom fields automatically into 0CRM_SRV_REQ_INCI_H.
    Thanks in advance,
    Ramz

    Hi Ramz,
    this seems to be identical to
    Re: Fields enhanced through AET are not reflecting in CRM DS Extract structure
    Please find my reply there.
    Best regards
    Matthias

  • Changes are not reflected in Script output

    Hi All,
    i am facing a problem in SAPscript.
    I have made a Zscript by copying standard script F110_FR_CHEQUE. I have made the changes in the script as per requirement in development client and transported it to testing client to test (As i dont have any data in development client). But, surprisingly, when i run the program and check the output, the changes are not reflected in the script output.
    First i thought that my script was not triggered thats whay i m not getting any change, but later i changed the dimension of one of the window, in which some hard coded text is written, the differece i found was that, window size is changed, but the text written in that window is still same (what was in standard script.) .
    I am using standard texts for hard coding in script. Standard texts have been transported in testing client also.
    please help me in this regard.

    Hi,
    Could you plese Check NACE whether your script is confiugring or not.
    If it is configured well then Check Standard Text is available or not in Test client by open it in SO10.
    Check all the paragrah formats applied to Standard text are transferred to Test client which are in SE72.
    IF it is available in SO10 then debug the print program for that windows any standard conditions are calling to print the text.

  • Deleting items from R/3 are not reflected into BW

    Hi all,
    We are facing an issue in the extraction of sales data. (2lis_11_vascl)
    If the items in a sales document are deleted in R/3 through the transaction VA02 then these changes are reflected into BW system.
    But if the items in a sales document are deleted through a background job in R/3 system then these changes are not triggering any delta records and are not transferred to BW system.
    How to enable the R/3 system to capture the change even when the records are deleted using a background job?

    The delta is not that simple....
    The delta is based on certain fields being changed. These fields are controlled by change pointers set into the tables..
    It is a long process but then the summary is :
    1. You have change pointers set for each table to capture changes... these change pointers write back to your dellta queue whenever these fields change. If you change a field which does not have a change pointer attached to it then the delta is not recognized..
    2. Also it depends on how you do the deletion in the background job - if you are just deleting from VBAP then this is not right - there will be a standard SAP function module for deletion which has to be used - the reason being that when you delete sales orders then the stock , allocations etc for the same have to be adjusted...
    3. You will have to find out the change pointers in place currently for the sales extractor ( I think it is ROOSOURCE ) and then identify the fields which are linked to this change pointer. You will then have to create either a new change pointer or change the existing one to capture these fields also and then the delta should start flowing...
    You can ask an ABAPER or a R/3 functional person about the way these change pointers are configured and setup in R/3

  • Changes are not reflecting when de-implemented the SNOTE.

    Hi All,
    I have implemented SNOTE : 79847 , which is having two steps one is manual and the another one is automatic . but now i want to de-implement the Snote due to some requirements .
    After de-implementing the Snote ,i checked for changes in the standard program which were automatic . Over there the changes are not reflecting , that is the code which was  got appended due to implementations of note , now it is not getting removed. 
    kindly help me out.....

    Hi All,
    I have implemented SNOTE : 79847 , which is having two steps one is manual and the another one is automatic . but now i want to de-implement the Snote due to some requirements .
    After de-implementing the Snote ,i checked for changes in the standard program which were automatic . Over there the changes are not reflecting , that is the code which was  got appended due to implementations of note , now it is not getting removed. 
    kindly help me out.....

  • Changes are not reflecting in Quality server

    Dear All,
    We have recently installed the Portal 7.4 servers.
    Currently we are having two servers Development and Quality.We have Configured NWDI using CMS and created tracks(Defined run-time systems as Development and Consolidation)  we are able to checkin the activities at NWDS , when we are selecting the component in the consolidation and on  click of  import we are getting the message as import finished, but the changes are not reflecting at the Quality server. i.e in earlier 7.01 version when we imported , the ear was deployed automatically in quality but it is not getting deployed in the new version 7.4
    Regards,
    Ramana.

    Dear Ervin/Jun Wu,
    Thanks for the Responce.
    As per the given link the track is configured  with out any issues (When we are clicking on Deployment in the Transport studio it is opening new tab like below and we are not having any errors when we click on Start deployment nothing is happening)
    http://hostname:50000/webdynpro/dispatcher/sap.com/tc~SL~CMS~WebUI/Deployer?BS=EPD_PRTADEV_C
    Please check the below log regarding deployment when we do the import
    SDM-deployment-notification  Log file.
    20141028125231 Info :Starting Step SDM-deployment-notification at 2014-10-28 12:52:31.0994 +5:00
    20141028125231 Info :Deployment is performed asynchronously.
    20141028125231 Info :Following DCs are marked for deployment (buildspace = EPD_PRTADEV_C):
    20141028125231 Info :
    20141028125231 Info :RequestId: 152
    20141028125231 Info :==> no resulting DCs for deployment
    20141028125231 Info :Follow-up requests:
    20141028125231 Info :
    20141028125231 Info :
    20141028125231 Info :Step SDM-deployment-notification ended with result 'success' at 2014-10-28 12:52:31.0995 +5:00
    Regards,
    Ramana.

  • Changes are not reflecting in the Quality

    Hi,
    These are standard SAP Components. I have imported the ESS and MSS Packages.
    Actually 3 Development Components are using in my application (Tra,TraTri and TraTre).Tra is the root DC.
    I have made  changes  to those objects and sucecessfully  build  without errors.
    After check-in all  activities  those activities are working fine in Development system.
    But those changes not refclecting in Quality system. So i was founded build log error in Consolidation.
    I was fixed the error in the Development system and build the components without build error.
    still now changes are not reflecting in the quality system.
    But out of 3 DCs(Tra,TraTri,TraTre) Tra and TraTre are working fine in Quality(changes are  reflecting) only problem in TraTri DC (changes are not reflecting in the Quality)..
    Please help me as soon as possible....Its very help full for me
    Regards
    Sudhakar Reddy A

    Hi Slava,
    very very thanks to you for the fast reply. but one thing in my side.
    When i release the activities after successful build, i export those changes and place them in the import queue of the consolidation system in the CMS.
    The export in the SAP NetWeaver Developer Studio packs all selected activities into a change request, and then places them in the import queue of the consolidation system.
    When the my system administrator imports this request into the consolidation system, the released changes are integrated into the DTR workspace of the consolidation system; the build server compiles the modified components.
    my system administrator findout build error in consolidation system:
    [wdgen] [Error]   .PersonnelNumberCheck: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Error]   .PersonnelNumberCheck.I_Employeenumber: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Output [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Info]    com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Output [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.E_Name: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Et_Return [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Info]    com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Et_Return [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Type: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Log_No: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Field: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.System: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V1: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V3: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V2: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Log_Msg_No: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Number: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V4: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Parameter: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Id: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Row: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextValueAttribute EmployeeName [readOnly]: The context attribute has to be read-only. (Hint: As the mapped context attribute is read-only this attribute has to be read-only, too.)
    I was fix error in my development system with out any build errors. still now not working ...pls give me any suggestion.i dont have access to consolidation system.
    Regards,
    Sudhakar

  • 2LIS_02_ITM deleted line items are not reflected in BW

    Hi,
    Our current Data flow 2LIS_02_ITM-->DSO-->CUBE.
    I am analyzing a Invoice, When it is created 01.04.2014 it has got 10 Line Items and all the data is load to BW,Invoice with 10 Line items.
    In ECC I can now see the same Invoice only got 5 line items and from change log I can see 5 line items are deleted on 15.04.2014.These changes are not reflected in BW.In BW invoice data still shows 10 line items.
    If I perform setup table job and ECC RSA3 for that invoice I am getting only 5.
    I believe it’s something to do with 0RECORDMODE,Can you please let me know how to fix this in BW.
    Thanks

    Yes this is a known behavior in case of deltas.
    For Deleted line items Rocancel field will have an entry with R.
    To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
    Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
    Regards,
    AL

  • Updated (VORowImpl ) values are not reflected in inline POPUP table

    Hi Expert,
    Currently i am getting exception when i try to update my iterator binding,
    Here is my use case,
    I have view object displayed inside the inline popup as a table. When i modify one of the cell i am firing the value change listener and it is called the ViewObjectRowImpl class method. Inside the method i do some computation (i am executing some DB query to get back some value). After the query execution i am updating the other columns data based on the changes.
    First i have PPR the table and check out the update values. Unfortunately the change values are not reflected.
    Then i used the following code
    DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
    if (itrBinding != null) {
    itrBinding.executeQuery();
    itrBinding.refresh(DCIteratorBinding.RANGESIZE_UNLIMITED);
    Now i am getting the " JBO-25003: Object EmployeeMgmtAM of type ApplicationModule is not found."
    May i know what went wrong? Am i missing anything. May i know how can i refresh the UI table based on the updated VORowImpl. Looking forward hints.
    Thanks

    Thanks Frank, Actually i am accessing the client method as follows,
    DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
    if (itrBinding != null) {
    EmployeeVORowImpl employeeVO = (EmployeeVORowImpl)itrBinding.getCurrentRow();
    empoyeeVO.methodName();
    May i know what is the different between accessing the method as shown above and access via the MethodBinding?
    How about access the attribute of the View object using the above approach? i.e empoyeeVO.getName() like ....
    Also i have configure the ADF looger to finest level and found the primary reason to "Applicaiton module not found" was some entity validation. But this not always happened. Same test case works fine and fails sometimes. I am clueless. Could you please throw some light.
    Thanks
    Edited by: user1022639 on Feb 7, 2012 5:24 PM

  • Changes are not reflecting in the discoverer workbook

    Hi ,
    I have a report created with user Disco(Disco.Report_name).Now I need to add a column to it and i have done that with other user Discodev but when I save it the changes are not reflected on Disco(Disco.Report_name) rather it is being saved with user Discodev(*Discodev.Report_name*) .
    The User wants that the changes should be reflected on Disco.Report_name (I can't use the credentials of Disco to do this as it is also a user) .
    Appreciate your help !!
    Discoverer Version 4i
    Thanks ,
    Vijay

    Hi West,
    Thanks for the reply.
    I want to get clarified one thing, Is there any option where DISCO user can give Privileges to DISCODEV to make the changes,as the DISCO user is not a common user I have a problem in making the changes.
    Thanks,
    Vijay

Maybe you are looking for