Enter a country for partner 0000002185 with type 'Goods Recipient'

Hi  everyone,
We are using SRM 4.0. For a certain user we are facing the error as: "Enter a country for partner 0000002185 with type 'Goods Recipient'".
Kindly help me to resolve this. This error is not occuring for any other user.
Regards,
Bhakti

I am closing the message.
The issue has been resolved with the help of note:597475

Similar Messages

  • Message: Enter a country for partner xyz with type 'requester'

    We are using SRM Server 500.
    I am customizing a new installation. When I create a SC in classic scenario using "Describe Requirement" I get following messages:
    "Enter a country for partner 0000000081 with type requester."
    "Enter a country for partner 0000000081 with type goods recipient."
    I didn't enter a source of supply, the partner number 0000000081 is a BP that belongs to the user in who creates the SC, as I can see in ppoma_bbp.
    All org-units are matched up in TA BBP_BP_OM_INTEGRATE.
    In TA BP I checked the address of 0000000081. Everything is ok, country is entered. What I cannot find is Partner type 'Requester' or 'Goods Recipient' in TA BP.
    I never had this Problem befor and I customized a few SRM, EBP, BBP, B2B systems. Has anybody an idea?
    Thank you for your response.

    Hi BERTRAND,
    one of our users is also facing the same issue when she is trying to cancel one confirmation in srm 7. DO you have any idea how can i check the consistency of the user in SRM7 as BBP_CHECK_USERS are not working in my SRM7 system.

  • Enter a country for partner 4000053932 with type 'Delivery Point'

    Hi Friend,
    I had set up new company code in SAP (R/3) and MySupply
    Also updated comapny code parener in BP t-code
    But i am getting error while creating shopping cart
    Saying that" Enter a country for partner 4000053932 with type 'Delivery Point'  (Item  Set up test )"
    Can any one help on this
    Thanks
    Shrinivas
    Edited by: Shrinivas Siddapur on Mar 6, 2008 3:32 PM

    I am closing the message.
    The issue has been resolved with the help of note:597475

  • Enter a country for partner 0000000497 with type 'Proveedor

    Hi Masters.
    I am working in settup scenario SRM/EBP  to SRM/SUS.  version 7.0 
    problem when send XI message into Srm/sus CLIENT The transaction SXMB_MONI in trace show the next message of error
    Enter a country for partner 0000000497 with type 'Proveedor'        = partner Proveedor
    Enter a country for partner 0000001052 with type 'Parte venta'       = Partner sales
    Thanks.

    Hi S Neelima . thanks for you hellp, but I review the note 702786 and does not apply for my version srm server
    my sp level is SAPKB70107 . I  review the code in Include and yes is  the correction mentioned into note.
    another idea ?
    Thank.

  • Enter a country for partner with type 'Sold-to Party'

    Hi
    when we try to send Delivery Scheduld to SUS from R/3 thro
    Idoc "DELINS" we are getting the following error on the SRM side
    An error occured within an XI interface: Exception
    occurredE:BBP_PD:147 -Enter a country for partner with type 'Sold-to
    Party' E:BBP_PD:428 -Enter exactly one partner of type Sold-to Party
    I:R5:553 -'Different country' field contents deleted because identical
    to 'Country' E:BS:002 -"Create" is not allowed (SUS Purchase Order
    7500000062 ) Programm: CX_BBP_BD_ERROR===============CP; Include:
    CX_BBP_BD_ERROR===============CM002; Line: 57
    we also tried referring the note 987569, we are on SP as follows
    SAP_BASIS SAPKB70010
    SRM_PLUS 550 SAPKIBK007
    SRM_SERVER 550 SAPKIBKT07
    regards,
    Anand

    Hi
    <u>We have faced a similar problem in our previous Implementation.
    This is happening in some cases, where the configuartion settingas are not correctly done.</u>
    <b>After several tentatives, I managed to solve it activing on the Customizing for Multicompany in one client.
    I have accessed to table BBPC_MARKETSET (Status of selection in a market set system) through SM30 and I have just removed the flag "Configure Market Set Procurement".</b>
    <u>Also, another option,
    check your Enhancements (customer specific) because this is a clear logical error.
    The same partner function is added twice, hence it must be deleted programmatically in the enhancement logic.
    FYI.. I usually encountered same type of issues in almost every implementation.</u>
    Hope this will help.
    Please reward suitable points, incase it suits your requirements.
    Regards
    - Atul

  • 1 step approval good receipt with different Good Recipient

    Hi gurus,
    We have implemented SRM 5.5 (SAPKIBKT09).
    We are using standard WF's for goods receipt:WS10400002 1 step approval + WS10400010 Goods receipt without approval. This WF is working perfectly since using shop on behalf.
    Managers don't want to create any shopping cart neither confirm them. So, EMPLOYEE creates a shopping cart on behalf MANAGER throught Screen "Shopping Cart Full Functionallity" selecting "MANAGER" in field SHOP FOR and "EMPLOYEE" in field good recipient.
    After PO creation, Goods receipt without approval is working because EMPLOYEE is able to confirm the SC.
    However, when there is an internal dispacther that confirms and the 1 step approval WF is triggered, the item is going to MANAGER inbox, not EMPLOYEE's. Remember that the good recipient is the EMPLOYEE not the MANAGER, the MANAGER is only the Requester.
    Do you know why this is not working?
    Many thanks!
    Regards
    Patrícia

    Chriastian,
    It is possible only by using split valuation or by creating two different material master.
    Sorry i could not found any other way.
    Regards,
    Manish

  • How can I enter "Flate rates for travel costs" with more than 2 decimals?

    Hi expert,
    I want to enter flat rates for travel costs in table T706F.
    I have a figure with more than 2 decimals (0,066), but I cannot save it, because only 2 decimals are allowed for EUR.
    I don't want to change the decimals for this currency.
    I found OSS note 446116 which is release independent. It is a note of 30.10.2001.
    It suggests to create a new currency e.g. EUR3 and enter translation ratio's and exchange rates.
    This seems pretty drastic.
    Do you know if there is another way to handle this issue?
    Thank you.
    Kind regards,
    Linda Verding

    Hello Christian,
    I have checked it with consultants from SAP Brussels.
    They confirm that OSS note 446116 can be used to create flat rates for travel costs with more than 2 decimals.
    I will create a new currency (EUR3) with the description "for travel expenses only".
    Kind regards,
    Linda Verding

  • Specifying byte stream type for Read File with Type Descriptor

    Hi.
    I'm trying to write a VI that reads an image file format that can have
    different datatypes. What I have so far is that I open the file, read
    the header, and get the width, height, number of frames, and datatype.
    I calculate number of pixels by nrows*ncols*nframes with no problem,
    but I'm not sure how to tell Read File the correct datatype to read
    the data into.
    I tried using a Case structure where I have a Read File in each case
    with the correct type constant as input for that case. The problem is
    that the tunnel graduates the datatype to the highest representation.
    I found in Application Note 154 the discussion about Type Descriptors.
    Is there a way to generate a Type Descriptor and output it from a C
    ase
    structure? I tried just returning the value (e.g. 0x0402 for a Word),
    but Read File will just see that the byte stream type is a uint32.
    Is there any other way to do this?
    Thanks for any help.

    I converted the code to LabVIEW 6.1 for you and attached it below.
    Don't worry about being a newbie. We all start there. Keep asking this type of question and you won't stay there long.
    As you are discovering, being strictly typed means that you must rewrite code even for a simple data type change, or convert everything to the same data type first. For image data, conversion can result in a lot of extra space being wasted. Use a modified version of the GLV_WaveformBuffer.vi to hold your data. Use the array functions, which operate inline, to add to and delete the data wires in the buffer. This allows you to save several different data types. You will need several different inputs and outputs to handle these data types. I ha
    ve also attached a similar file created for exactly the problem you have - storing arrays of different data types (data from NI-SCOPE devices, in this case - can be float, I8, I16, or I32).
    Routines that take any type work in one of two ways. LabVIEW primitives, such as plus and minus operators, work by figuring out the type and doing the right thing in the C code layer of the LabVIEW environment. Users of LabVIEW can't do this. Users can make polymorphic VIs. Polymorphic VIs are actually a single VI for every data type that are referenced by a "wrapper", the polymorphic VI. Users still need to write a different VI for every data type they need.
    Take home message - if you need to work with different data types, you will need to rewrite your code for every data type or convert your data to a common data type. Polymorphic VIs and case statements are your friend.
    Let me know if you need more help.
    This account is no longer active. Contact ShadesOfGray for current posts and information.
    Attachments:
    GigaLabVIEW61.zip ‏362 KB
    sfpScpChan_Waveform_Buffer.zip ‏74 KB

  • Emulation for partner link with async operation and no callback client

    In our Composite, we are calling a partner link with operation 'XYZAsync'. It is called in async mode and there is no callback client attached to this call. Hence, it is not possible to create emulation for it ( Create new emulate option is unavailable for the particular operation).
    We are facing the following issues:
    1. Jdev is unable to generate the sample XML.
    2. When we tried to add emulation, the "+ icon" is not high lighted.

    Hi again,
    i managed to solve the problem:) Totally stupid.. the process variable name was not specified correctly..., but more stupid sounds the error message:))))
    Best Regards,
    Evanela

  • Problem with an enter inventory count for a material with serial number

    Hi all,
    I must post an Enter inventory count with the transaction MI04 for a material with serial number that it has more 250,000 of serial number, but the system give an error message of dump.
    Are there any alternatives to post the inventory document?
    Thanks.
    Best regards,
    Gaetano

    you can't but uplaod using LSMW rather entering manually otherwise you need coremod

  • Find partner number based on goods recipient and ship to address

    Hi SRM Experts,
    Can anybody please tell me that how i can get the partner details like partner number, partner guid etc based on ship to address and goods recipient?
    I have seen some shopping carts in BBP_PD. In those shopping carts, i have seen that goods recipient's  partner details are same as requestor partner details.
    Can i consider that generally goods recipient partner details remains same as requestor partner details ?
    Thanks & Regards,
    Akash

    Hi,
    Other than shop on behalf functionality, always requester and goods receipient are same.
    Thanks
    Rajesh K

  • Where to enter the base for skf and act type

    Dear Forum,
    1 where can i define the total number of employee for each cost center? i cannot enter in KK01 as in KK01 i only can define the measurement which is number of employee.
    2 where can i define the number of hour spent? cannot be in KL01 as in KL01 only define the measurement which is hour only.
    thanks

    hi,
    1. for SKF its KP46
    2. for activity types it can be eitheir in the KP26 or in the cost object incase if its related to product costing.
    hope this helps.
    regards
    sayeed

  • For what is the field SVER with type RSRSVER in structure RSDRI_S_SELNODE ?

    Does anyone know what does the field SVER with type RSRSVER in structure RSDRI_S_SELNODE mean ??
    Thx....

    If this indicator is set, the material is costed using costing with a quantity structure (BOM and routing).
    The system searches for any existing cost estimates with quantity structure for the individual materials; it ignores existing cost estimates without quantity structure. If the system does not find any valid costing data for the materials, it costs the material or accesses the price in the material master.
    If this indicator is not set, the planned costs for the material are calculated using the cost estimate without quantity structure. In this case, you use unit costing to create the quantity structure manually by entering costing items for materials and activity types, for example.
    The system now searches for any existing cost estimates without quantity structure. If a cost estimate without quantity structure exists for a material, the results of this cost estimate are included in a cost estimate with quantity structure. If there is no cost estimate without quantity structure, the cost estimate with quantity structure accesses the price in the material master record. The planned costs for this material then go into the cost estimate with quantity structure as raw material costs.
    This does not apply if the indicator Ignore prod cost est w/o qty structure is set in the costing variant.

  • Issue with Shopping Cart ... No Address Found For Partner Function etc.

    Hi Experts,
    I am facing an issue in EBP.
    Using SRM 5.0 classic scenario.
    While creating a shopping cart we are experiencing the following ERROR: "error in system, shopping cart cannot be processed any further."
    The details of errors are as below:
    No data found for contact person XXX. inform System Administration (XXX is the BP ID of the user)
    No address found for partner function type Goods Recipient
    No address found for partner function type Requestor
    Please help me in overcoming the issue.
    Thanks,
    Pratyush

    Thanks for your reply
    I have already checked that the BP number is present.
    However using bbp_bp_om_integrate i got the errors:
    using user ID from su01:  I got a red signal  in Object Existence / Consistency with error
    "Business Partner for user XXX is missing or containing errors"
    using CP & BP : I got a red signal in Address consistency & following errors:
    "Error determining address for employee XXXXXXXXXXXXXXXXXXXXXXX" & "Address for person (BP) XXX missing"
    Please help

  • Check on Shop for usrid and Goods recipient field in BADI

    I would like to make a check thro' check docuement BADI in SRM 3.0, Give an error to user if shop for usrid is different from Goods recipient field in the shopping cart.
    In which structure the shop for usrid information is stored and how should I read it. I can get the goods recipient information from structure-BBP_PDS_PARTNER.
    Any help is greatly appreciated.
    Thanks in advance!
    Mrudula

    Thanks Rupali,
    I've already created my search help and search help goes well with any of my ztable or zprogram. But, the field where I want to add my search help is a standard migo program SAPLMIGO, and the field where I want to add search help is "good recipient" field under "where" tab of "migo" transaction.
    And the name of the field is WEMPF, which belongs to the sap standard structure GOITEM.
    So, SAP wont allow me to edit it's standard tables. Is there any other alternative?
    ~With Regards,
       Him

Maybe you are looking for