Entering 2nd Inv with UNplanned deliv costs

Hi all,
In MIRO, after all the invoices are entered against the PO and all are passed for payment (No payment block) and if the vendor sends another invoice with just additional UNplanned Delivery costs..... How do I enter this invoice? Is this a "Subsequent Debit"? Do I still enter the Unplanned Delivery Costs in the "Details" tab of the Invoice header?
Thanks in Advance.
Changed Question
Edited by: Duke Dukester on Aug 26, 2008 8:34 PM

Hi,
There are 2 ways:
1. To Post the subsequent debit...
2. If you would have not posted the docs for payment..then it was possible for you to cancel the invoice and correct the unplanned cost and post again...
hope it helps..
Regards
Priyanka.P
AWARD IF HELPFULL

Similar Messages

Questions about Unplanned deliv cost as Freight in Invoice

Hi Experts,
I believe if you don't have any condition for freight in purchase order, then only way to charge freight in Invoice is by using "Unplanned deliv cost" field. My questions are:
1. Is there any way that we can calculate tax on this unplanned deliv cost value?
2. Can we have some tolerance limit for "Unplanned Deliv. cost". (e.g $500)?
We are receiving invoice through EDI.
Regards,
Kamal

1. Is there any way that we can calculate tax on this unplanned deliv cost value?
Yes, you can. Go to OMR2 trasnaciton adn maintain the tax code for you rcompany than it will populate that in tax code in MIRO for unplanned
if you want to see the tax code in MIRO than in the SPRO-MM-Invoice verificaiton-Incoming invoice- Configure How Unplanned Delivery Costs Are Posted
here you have to maintain the 2 in your company code
than only you can see the tax code in MIRO for unplanned delivery cost
2. Can we have some tolerance limit for "Unplanned Deliv. cost". (e.g $500)?
No, this free form fiedl except you use the custom code or user eixt for this to control

Service tax calculation on unplanned deliver cost

Hi,
While doing MIRO if we are give negative amount in unplanned delivery cost than system calculating service tax on the total value of GRN.
For example MIGO (GRN) has been done for amount 100,000
But while doing MIRO if I put (-20,000) in unplanned delivery cost than system still calculate service tax on 100,000 not (100,000-20,000= 80,000)
We have also implemented two notes 1402621 and 1300860 but problem still the same.
Please advise whether we are missing some configuration or something else.
Regards,
Abhinav Sharma

Hello Vishal,
There is one settings in SPRO - MM - Logistics Invoice verification - Incoming Invoice which asks for the default tax code for unplanned delivery costs.You can put V0 there as zero tax calculation for unplanned delivery costs But am not sure whether it will work if we are posting the unplanned delivery costs in the same line item of material values. Check the same from your side. Now i dont have access to the system and i will check from my end also for the same and get back to u.
Regards
Gregory Mathews

While doing MIRO with unplaned cost system is picking accurel G/L account

Dear All,
While doing MIRO with unplaned delivery cost system is picking accural G/L account rather than cost element from PO.
Thanks
KMR

Hi,
It depeneds how the Unplanned Delivery Cost has been configured for the comany code.
SPRO>Material Management>LIV>Incoming Invoice>Configure Unplanned Delivery Cost.
Against Comapny Code put blank if : Unplanned delivery costs are distributed among the invoice items ( here the Materil account or the Account in the PO will be used. )
Put 2 if : Unplanned delivery costs are posted to a separate general ledger account ( here the posting key UPF will be used to determine the g/l account ).
Thanks and Regards

CO OBJECT ERROR IN MIRO FOR UNPLANNED DEL COST

Dear Friends
I m facing one error in MIRO can u guide me in that context.
well in MIRO i m postin Unplanned deliver cost.......and it is asking me assignment to this G/L for Cost center object..
ERROR: Account 40201070 requires an assignment to a CO object
..I have already assigned the Cost center for the G/l in OKB9 is there anything else has to be done
Actually we have 4 plants and 4 Business area i.e whenever i am doing any posting for BW01 -and Business Area BA01 My cost center BW01402 will get hit similarly for other plant and Business are Cost center has been assigned in OKB9 in Details per business Area,is it the right method or anything else has to be done.
Actually in OKB9 i have maintained that GL and in Detail per business area i have maintained cost center per business area
we have assigned the right Cost senter only i.e for different Plant and differenct business area we have asigned different cost center.
Then y i m getting error i m not understanding..
Please guide me in this context.
Also i am trying other method of posting Freight (unplanned delviery cost ) as well as labour charge through ACTIVATING -"Activate Direct Posting to G/L Accounts and Material Accounts"
So that for particular G/L I can Debt or credit that account,in which will doing MIRO G/L Tab gets activated ,i m entering G/L and entering amount for freight and Labor is this the correct procedure.
Regards
shailesh

I have already assigned this G/L as primary cost element in FS00 and in OKB9 also Cost center is assigned as per Business Area as mentioned in the thread
i.e we have 4 plants and 4 business area so we assigned 4 cost centers to 4 business area, so whenver i m postin unplanned delivery cost for a particular plant then my GL should hit with proper cost center but still it is asking for CO OBJECT
ERROR IS:
"Account 40201070 requires an assignment to a CO object"
If i maintained the default Cost center in FS00 in cost element then it doesnt give error but my requirement is that for a particular plant ,and business are only cost area assigned to it should hit
Any other solutions.
Thankz and regards
Shailesh

Tax calc. during invoice post - taking unplanned del cost into account

Hi all
Iam posting an invoice in Miro for a p.o
i have material cost,unplanned cost
Iam using a input Tax of 5% which should only take Material cost into
account while posting.
but in my case it is taking the unplanned del cost also for calculation
can you pl. let me know where the changes are to be made so that only material
cost is to be taken for tax calculation.
for eg
material cost -- 100
tax               -- 5.0%
unplanned del cost -- 10
so my inv. value should be -- 115.00
where as it is taking as -- 115.50.
regards
Prasanna

Hi srinivas
Thanks for your inputs
This is the present scenario.
We are distributing Unplanned del cost among the line items.
1. without having the Config made ( in OMR2)
We can still post the Invoices with Unplanned delivery cost
(without clicking the Calculate tax button )
by adding the
1. unplnd del cost in invoice details
2.clicking the Net proposal button on tax tab view
3. enter the total amt on basic data
4 when we are simulating we are getting
Warning message *********Twice ******
as Tax entered incorrect (code V4, amount 5.50), correct 6.05 eur
Message no. FF 707. and then we get the
5 We have to click the continue button twice
6 then we get the Invoice data view
7 when we click post , then again the
above warning message appears,
8 then we click continue button then it allows us to post.
correct me if the above process is wrong
My question :-
        1. is this the standard functionality when using unplanned delivery cost (without tax calculation )
       2. Can we apply some OSS so that this message appears only once.
Thanks
prasanna

Question on unplanned delivery costs need to go to GL account ????

Hello
I have a question regarding unplanned deliver costs. I am a FI analyst Can you please explain my how I can solve my problem . My user wants unplanned delivery costs to go in to the GL account .
In MM account determination GL account is set up but when I am doing MIRO
. I am putting total amount in amount field and freight costs in unplanned field under detail section.
When I simulate it gives me tax code related warning when I hit enter it credit vendor and debits GR/IR clearing and some debit to inventory account but not to freight account,
Whats the problem. Can someone explain me :
1)     What do I need to do to make it go to GL account ( account is set up but what is tax code related error . how do I fix that,
2)     How does unplanned delivery costs work if I have tax, discount and freight.
3)     Is tax calculated off total amount (inventory + freight) and discount too. How can I prevent that so that my tax is calculated just on inventory amount?
4)     DO I have to put total in amount field (meaning inventory amount + fright ) or not .
I will be grateful if someone can guide me towards right direction. Please give me a detailed answer. How does it work???
Thanks
Kavita Reddy

in standard setting the freight amount gets debit in the stock or inventoy account and gets credit in the fright accoutn at the time fo gr so it means the amount of frieght is gettting invenotrised
now at the time of IV IN MIRO SYSTEM CREDITS THE VENDOR ACCOUNT AND DEBITS THE GR/IR account
if u want to settele the planned delivery cost then select the laout variant for the planned delivery at item level
or in case if u want to make use of the unplanned delivery cost then u r doing the right step
but as u simulate the g/l accounts sytem will debit the inventory or stock account for it rather then frieght account (i belive so )
as the uplanned delivery cost may be getting inventorised that is added to the material price
and as u said u dont want to have tax calulated on the unplanned delivery cost then i suggest u to post it as subsequent debit and there do not make use of the claulate tax option or do the direct posting for the g/l account option

MIRO- Unplanned Delivery Costs info. not showing on FS10N line items

HI,
Can anyone explain why when posting an Invoice with unplanned delivery costs using T-code MIRO, the purchase order info. does not show in the GL line item display T-code FS10N for any of the unplanned delivery cost line items. If anyone have a solution to allow the purchase order info. to show on the uplanned delivery costs line item that would be great.
Thanks.
Rickey.

Un-planned freight is entered on the header of the invoice and therefore relates to the entire invoice. Since, its possible to have mulitple PO's on one invoice it would only be possible to assign the PO when there is exactly one PO on the invoice.
Alternative, you can use planned freight or post the unplanned freight using the G/L tab in transaction MIRO. By using the G/L tab you can enter any information required for accounting (including multiple lines in case it is required to split the un-planned freight by several PO's.

TAX not Calculating for Unplanned Delivery cost in MIRO

Dear All,
I am having an issue with Unplanned delivery cost in MIRO,
We have to do an accounting of a invoice/PO which contains in addition to actual Value the Unplanned Delivery cost also, and for which also the TAXes also applicable with ED 10% and ECess 2%,SHcess 1% ,
Now in MIRO if i want to enter these Packing and forwarding chanrges in Unplanned delivery cost, but the TAX rates is not calculating for the same.
The TAX rates are calculating only for the values other than Unplanned delivery cost.
What i want TAX also need to be calculate based on the TAX code choosen in MIRO or as flow that of PO.
I have checked in OMR2, there we have mentioned Default Unplanned delivery cost tax code as ED NIL.
Can any where in the setting we can say by default the TAX rates should calculate as that of PO or whatever TAX codes we have choosen in MIRO.
How to achive this, pl help.
Regards,
Nagaraj S

hi
the screen shot i sent is also of 4.7E
now u can check OMR2 for default tax code for unplanned delivery cost
can u show us the screen shot of the details tab of MIRO
also check in SPR>MM>LIV>Configure How Unplanned Delivery Costs Are Posted
here what value u have maintained ,we are using 2 as (2 Different G/L line)
regards
kunal
Edited by: Kunal Ingale on May 19, 2010 6:18 AM

Unplanned delivery cost for different Vendor

Hi,
For a import PO we need to pay OCTOI to Municipal corporation.
Unfortunately while PO creation the octroi condition was not entered.
Now we need to post a invoice for this and the condition is, we must post this to material.
We dont want to do direct FI entry as then this will not load on material.
Entring Unplanned delivery cost at the time of invoice will not be possible is the Vendor is different.
Any suggestions please...
Rajesh

Dear Rajesh,
unplanned delivery cost is basically which not plan at the time of PO and it will be expected at the time of invoice.
you can enter extra amount in unplanned delivery cost, but check at the time of Stimulate which a/c is being captured.
The Unplanned Delivery cost is default in separate GL or in Stock Account depends upon the configuration.
check In SPRO ,Maintain settings as shown
MM---> Logistic Invoice Verification -->Incoming Invoice --> Configure How unplanned delivery costs are posted
Please check the below link for more information
http://www.sap-img.com/financial/unplanned-and-plan-delivery-costs-in-stock-and-gl-account.htm
Unplanned delivery costs in MIRO
Regards,
PK.

Unplanned Delivery Costs in Invoice Verification

Hiii All ,
I am getting an error " Balance in Transaction Currency " when i give the Unplanned delivery costs. The configuration that i made is Unplanned delivery costs should be added to the Invoice Items. This comes when i am posting the Planned delivery costs i.e freight Conditions. Please suggest me if any configuration is missing.
Regards,
Kumar

Hi,
You appear to be adding Planned AND unplanned delivery charges somehow????
If you have entered freight conditions on the PO and if that freight cost is being captured during GR (as you indicate by the value of 110 at GR stage) then why are you entering unplanned delivery costs as well?
You should be simply selecting the option "goods/service items + Planned delivery costs" from the pull down list in the centre -right of the MIRO screen (if the delivery costs are included on the same invoice and vendor). the total value for the invoice amount should be entered as 110, (If you are ONLY entering the planned delivery costs then select this option and ONLY enter 10 as the invoice amount) but there is no reason to enter ANYTHING in the unplanned delivery costs field because these are PLANNED delivery costs.
Or are you saying that there are unplanned costs on top of the planned costs? In which case the invoice amount should be 10 PLUS the unplanned costs.
Steve B

Unplanned delivery costs in MIRO

Hi,
In what scenario we use "Unplanned delivery costs" in MIRO.
We created the Purchase Order and did the goods receipts. At the time of Vendor Invoicing, we came to know that we forgot to enter freight value in the Purchase Order. We don't want to reverse the goods receipt, and we want to rectify the error in the MIRO. What is the best way to do this.
I have explored the various possibility in MIRO like,
a. putting freight amount in Unplanned delivery costs of Details tab.
b. putting the freight amount directly in the G/L (below in the G/L Account tab).
I just want to know "should we stop the users to do the mistakes in future (our user is saying - the SAP has given the option, hence we must use this). Our user is saying that he is not aware of the freight amount at the time of PO creation, hence he will not enter the freight value in the Purchase Order and will use the Unplanned delivery costs for entering the freight always.
Regards,
PK

>
PK wrote:
> Hi,
>
> In what scenario we use "Unplanned delivery costs" in MIRO.
>
> We created the Purchase Order and did the goods receipts.
At the time of Vendor Invoicing, we came to know that
we forgot to enter freight value in the Purchase Order.
We don't want to reverse the goods receipt, and
we want to rectify the error in the MIRO. What is the best way to do this.
> I have explored the various possibility in MIRO like,
>
> a. putting freight amount in Unplanned delivery costs of Details tab.
> b. putting the freight amount directly in the G/L (below in the G/L Account tab).
>
> I just want to know "should we stop the users to do the
mistakes in future (our user is saying - the SAP has given the option,
hence we must use this). *Our user is saying that he is
not aware of the freight amount at the time of PO creation,
hence he will not enter the freight value in the
Purchase Order and will use the Unplanned
delivery costs for entering the freight always*.
>
> Regards,
> PK
If freight amount is only know at the billing then enter freight amount in unplanned delivery cost field.
In SPRO ,Maintain settings as shown
MM---> Logistic Invoice Verification -->Incoming Invoice --> Configure How unplanned delivery costs are posted --->
For required Company Code = '2'.
Create new g/l account in Chart of accounts(FS00)

Distributing several unplanned delivery costs.

Hello,
Is it possible to enter more than one unplanned delivery cost? I need to inform three unplanned delivery costs as follows:
Example
Unplanned delivery cost A: G/L 630100 Tax S3
Unplanned delivery cost B: G/L 630100 Tax S0
Unplanned delivery cost C: G/L 472003 Tax S3
Finally, the three unplanned delivery costs have to be distributed to the invoice items.
Thanks in advance,
Ricard.

Any Suggestions?
Thanks,
Ricard.

MIRO - Unplanned delivery costs

hi all,
in MIRO transaction there is a field name "unplanned delivery costs" today all this costs post to GR/IR account and our company want to define a seperate GL account to unplanned delivery costs (INVFO-BEZNAK)
we ask to know where in the customizing we should do this definition
thanks,
meir

Dear meir
There is an additional configuration needed for posting Planned Delivery Cost to a specific G/L account apart from OBYC - Transaction key UPF
Please use the path below to do your configuration:
SPRO-->Materials Management --> Logistics Invoice Verification --> Incoming Invoice --> Configure how Unplanned Delivery Cost is Posted
Here you have to assign the Co Code with Unplanned Delivery Cost type 2 (Post to Diff G/L Acct)
This will resolve your problem.
Cheers
IMK

Unplanned delivery cost picking rounding off value in sap miro

Dear Experts,
I have configured unplanned delivery costs to be posted to separate GL account. I have set the default tax code also. In OBYC i have set the frieght and transportation GL account against UPF transaction key. Now even though the user is not entering any value in unplanned delivery cost field, system is automatically taking the rounding off values(manually entered by user to match the vendor invoice) from MIRO line item and is posting to the freight account.
Query -2 - while reversing the already posted MIRO document in MR8M the rounding of value which has been taken automatically in unplanned delivery cost is showing in the error message as :
"Balance is not equal to zero: 0.35- inr"
please refer below screen shot for the error message
Please suggest.
Regards
Chinmaya

please read my blog it explains how to close a question, just replying "closed" does not do really this job
How to close a discussion and why

Entering 2nd Inv with UNplanned deliv costs

Similar Messages

Maybe you are looking for