Enterprise Portal server node monitoring

Hi all,
I have an Enterprise Portal system based on SAP NW 7.02. I have 3 server nodes with max heap set to 3GB (I just created the 3rd server node).
I have a few questions regarding the monitoring part.
1) When a request comes from users, the dispatcher will send the request to the server node based on the load on the server nodes. Am I right?
2) Is there some way (tool or logs) I can measure the load on each server node at any point in time?
3) How do we interpret the content of the file dev_server0:
(a) Mon Apr 28 11:10:42 2014
48826.084: [GC 48826.085: [ParNew: 474420K->58192K(512000K), 0.1508051 secs] 1009031K->594433K(3043328K), 0.1513562 secs] [Times: user=0.80 sys=0.03, real=0.15 secs]
For example, 474420K was cleared to 58192K, what is 512000K? What are the remaining values?
(b)
Thu Oct 24 17:40:32 2013
68937.562: [CMS-concurrent-mark-start]
68937.572: [Full GC 68937.572: [CMS
Thu Oct 24 17:40:39 2013
68944.836: [CMS-concurrent-mark: 7.253/7.273 secs] [Times: user=7.29 sys=0.03, real=7.27 secs]
(concurrent mode failure)
This one is an earlier one when I had 2 nodes. Please help me interpret this also.
regards.

Hi all,
Thanks for the clarification.
I'll close the message now but just one last thing:
Even after adding the 3rd node, I got the full GCs and had to restart the system a few times:
Wed May  7 10:40:04 2014
47339.492: [CMS-concurrent-preclean: 0.680/1.488 secs] [Times: user=1.68 sys=1.36, real=1.49 secs]
47339.493: [CMS-concurrent-abortable-preclean-start]
47339.493: [CMS-concurrent-abortable-preclean: 0.000/0.000 secs] [Times: user=0.00 sys=0.00, real=0.00 secs]
47339.496: [GC[YG occupancy: 410037 K (512000 K)]47339.497: [Rescan (parallel) , 0.5012912 secs]47339.998: [weak refs processing, 0.0048337 secs]47340.003:
[class unloading
Wed May  7 10:40:05 2014
, 0.1856070 secs]47340.190: [scrub symbol table, 0.4474248 secs]47340.637: [scrub string table, 0.0371698 secs] [1 CMS-remark: 2478114K(2531328K)] 2888152K
(3043328K), 1.3325627 secs] [Times: user=10.39 sys=0.23, real=1.33 secs]
47340.830: [CMS-concurrent-sweep-start]
Wed May  7 10:40:15 2014
47350.605: [Full GC 47350.606: [CMS47350.940: [CMS-concurrent-sweep: 5.122/10.110 secs] [Times: user=12.70 sys=8.57, real=10.11 secs]
(concurrent mode failure)
Wed May  7 10:40:35 2014
: 2531065K->2392788K(2531328K), 20.2064808 secs] 2941102K->2687033K(3043328K), [CMS Perm : 292034K->291935K(786432K)], 20.2073316 secs] [Times: user=20.22
sys=0.04, real=20.21 secs]
47370.825: [GC47370.826: [GC 47370.827: [ParNew
Wed May  7 10:40:36 2014
(promotion failed): 297544K->297773K(512000K), 0.4042734 secs] 2690332K->2690567K(3043328K), 0.4049733 secs] [Times: user=7.29 sys=0.04, real=0.41 secs]
[1 CMS-initial-mark: 2392793K(2531328K)] 2690567K(3043328K), 0.7135858 secs] [Times: user=7.60 sys=0.04, real=0.71 secs]
47371.541: [CMS-concurrent-mark-start]
How do we interpret the above? Is there some parameter that I need to further fine-tune?
regards

Similar Messages

  • Deactivate Portal server node from Web dispatcher, but still keep online

    We want to deactivate a Portal server node from the Web dispatcher. We also need to connect directly to the specific node. 
    We configured the Server Node using  Config Tool --> Server_ID####### --> Debug --> Debuggable --> Restricted Load Balancing. The node is not available to the Web dispatcher, However we are unable to explicitly connect to that node. We get the error message in the browser:
    503 Service Unavailable
    SAP WebAS engine is starting...
    If this state does not change within a few minutes,
    please contact your system administrator.
    Check the recommendations in SAP Notes: 943498, 764417
    Message: Dispatcher running but no server connected!
    I have also read through the Web dispatcher online Help. They mention creating groups but they all seem to pertain to ABAP groups using SMLG. Our Web dispatcher is used in a strictly J2EE environment.
    There must be a Profile setting or some config to restrict specified nodes... Let me know if you have found out?
    Thank You,
    Jon Sells

    Hi PR,
    Yes I understand that the Web Dispatchers Job ends at that point. That's why I want to stop the requests at the Web dispatcher by not allowing those nodes to be available.
    Here is the situation. We have 3 Windows Servers with 10 Server Nodes spread accros them.
    Host A - 2 Server Nodes, Central instance (Message Server) and SQL Server DB.
    Host B - 4 Server Nodes.
    Host C - 4 Server Nodes.
    The Going Live Analysis suggested we move the DB off of the CI. We cannot do that at this time. What we can do is shut down the 2 nodes on Host A. Instead of shutting them down, we would rather remove them from the WD group. that way, our users never connect to the 2 nodes on the CI but Basis can still use them for Administration and those 2 nodes on the CI are never used for production purposes. Those nodes will just be used for monitoring and maintenance or even emergency purposes.
    Right now our process to remove the 2 nodes from the Web dispatcher is to connect to the Admin page for Web Dispatcher --> Monitor Server Groups --> Right Click on the Host and select Deactivate. We have to do this whenever the Message Server is retarted. The million dollar question: How can that be set via a startup parameter?
    Thanks
    Jon Sells
    Here is an example of how you can connect to a specific node:
    https://<Host_name>.domain.local/b2b/b2b/init.do;sapj2ee_irj=7501753

  • Hosting two portals on a single instance of enterprise portal server

    Hi,
    We have a requirement to host two different portals on a single instance of enterprise portal server. The URLs to the portals would be different. Also for logging into the portal, one portal would have only User ID and Password and
    the other may have Retailer ID, User ID and Password for logging.
    I am trying to understand what kind of an approach needs to be followed. There
    is a single instance of Oracle server where PCD is stored.
    How will authentication/authorization happen and how would the user data be stored for both the portals in a single instance of Oracle database.
    Thanking you in advance,
    Regards,
    Veena

    Hi,
    in general,  could do that by using a distinct role concept. With the "Collection of base rules" you can assign different portal desktops with different layouts to everyone based on criterias like groups, roles or users.
    We have 4 very different portals running inside one instance. Every portal has its own standardized structure and is selected by logon groups, that points to roles, which points to desktops.
    What will not work is a logon concept other than "userid, password". SAP, by default. only allows standard authentication with userid and password or ticket. Even if you use an LDAP that would have that distinction, you cannot query that property without modifying the system
    If you want to use anything different, you have to write a new logon handler for the logon stack (using JAAS). This is tricky, but not outrageous difficult. We have implemented three different new steps in the logion stack, each handles a different case, from ip-based logon, ticket or LDAP query. It is possibly, all of them don't have more than 20 lines of java. 
    But, still tricky.
    It is a broad theme and you can try it out with showcasing two different desktop themes belonging to two different roles. Than you can work your way through tge problems.
    In terms of database, it makes no distinction. You work solely with the PCD, and that is stored in the database. We are using DB2 and I've never touched the DB at all.
    HTH
    hs

  • SAP Portal server node identifier

    Hi:
    We have SAP Portals installed in two server nodes with a load balancer.
    I know SAP gives a unique internal identifier (number) by server.
    I want to know, where can I find this identifier ?
    Thanks,
    Felipe Mendivil Ortiz

    Open the Visual Administrator - it will show you the server and dispatcher processes with their identifier.

  • Improve Portal performance with BI-Java by adding additional server node.

    Hi SAP Expert
    I wonder anyone might have attempted this before,
    In an environment with BI-Java and Portal Java stack installed on the same server, is it possible to improve the system performance by adding additional portal server node? or is there any improvement seen by adding the extra server node?
    I am after suggestion and experience on how the portal performance can be improve, with consideration of BI-Java sharing Portal resources.
    Any comment will be most appreciated.

    Hi Jim,
    We've this configuration at our site, Portal and BI running together (not federated).  Recommendations would be to:
    1. Set a sensibly large max heap size on each server node of Portal (at least 2GB if not larger) and implement several nodes at least.  For example we have 4 x physical nodes, each running 3 server nodes of 2GB max heap size apiece so a total of 12 nodes.
    2. Implement the BI Safety Belt for large results sets (1127156)
    3. Implement the latest JVM / JDK you can on your environment.  We found much improved performance after implementing JDK SR10 with the J9/2.3 options enabled e.g.,  -Xjvm:j9vm23
    -Xsoftrefthreshold0
    4. Patch your BI components on the Portal (BIBASES, BIWEBAPP etc) to the latest available patch level for your Portal SP level
    5. Make sure all your RFC connections are load balanced to the backend and tuned for the kind of load you expect on your reports, and the BI is sized appropriately in terms of app servers and dialog work processes, RFC-enabled login groups in SMLG etc.
    6. Consult notes 1048691 (especially useful, opions &PROFILING=X&TRACE=X added to reports for example for performance tracing), 937697, 1021921, 948158 for information about problem analysis for this scenario
    7. Implement SAP Web Dispatcher for Portal to reduce load on static mime files
    8. Tune the Portal application.  There's plenty information on SDN related to Portal performance tuning.
    I hope this helps!
    Cheers,
    Marc

  • How to bind an IIS to the enterprise portal installed on a linux machine

    Dear all,
    I am very new to the topic of Enterprise Portal.
    Our intention is, to develop .NET IViews and deploy them in the Enterprise Portal.
    The Enterprise Portal Server is set up on a linux machine.
    The Guy who did install the Portal Server, has no idea how to "integrate" the Microsoft IIS to the Portal.
    After deploying my .net Component, i tried to view this component in the portal (by right clicking the mouse on the Component in in the .NET Solutions Explorer).
    This gives me the following error:
    Portal Runtime Error
    An exception occured while processing a request for:
    iView:N/A
    Component Name: N/A
    Could not find portal application com.sap.portal.dotnet.framework.
    Exception id: 02:06.......
    See the details for the exception ID in the log file
    I think that this has something in common with integrating the IIS on the Linux Machine, and maybe additionaly installing the pdk.net on the IIS webserver machine which should be used.
    Thank you for your help.
    Regards

    Hi,
    Welcome to the world of Enterprise portal
    Seems to me like you are trying to use the PDK for .NET. If so - Please read the overview section in the documentation to get a general idea of how it works (for example - IIS is not used at all!).
    See the Visual Studio integrated help or click this https://media.sdn.sap.com/html/submitted_docs/dotnet/index.htm
    there go to "Getting Started" and mostly "Overview".
    Anyway, It seems like the problem is that you didn't deploy the 2 required SDA's to the portal. You should also take a look at the "installation and configuration" guide. Download it here: https://www.sdn.sap.com/sdn/developerareas/dotnet.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/pdk for .net administrator guides.zip
    Good luck,
    Ofer

  • OS username issue to start the portal server

    Hi Friends,
    We are working on Enterprise Portal server with xyz os username. Now xyz user left the company and his id is disabled.
    Please let me know how to change the os username and password to another user.
    Regards,
    Lakshmi Prasad.

    Hi
    Please refer the below forum:
    how to change password for <sidadm> user on HP-UX
    OS USER PASSWORD
    Thanks
    Susmita

  • Siteminder 6, Apache 2.0.4.2, Enterprise Portal 6- SP15, AIX

    Enterprise portal server front ended with apache reverse proxy server which hosts Siteminder web agent 6.0.  Enterprise portal server and backend SAP application servers all configured to use sap logon tickets.  Enterprise portal server "ticket" login module stack configured to accept "HeaderVariableLoginModule" as optional criteria.  We verified that Siteminder web agent is indeed sending "HTTP_LDAP_UID" (LDAP userid header variable).  However, Enterprise portal is not accepting header variable as authentication and still challenged for basic UID password authentication even through reverse proxy.  I will gladly provide screenshots as needed.  Has anyone made this setup work, we need your assistance.  Thanks in advance.

    Hi Sasha ,
    we have got this working .
    Follow the instructions in
    http://help.sap.com/saphelp_nw04/helpdata/en/d0/a3d940c2653126e10000000a1550b0/frameset.htm EXACTLY ...particularly make sure you add them to the ticket template in the J2EE engine (not the SAPJ2EE template) .
    Make absolutely sure the header variable is what you think it is ( we used a perl script running in Apache to verify this as Apache can append HTTP_... to the header or not depending on the level and OS )..Do all that and it will work !
    Regards
    Daniel

  • Reverse Proxy and SLD on an Enterprise Portal 7.0

    Hi
    I need to configure SLD and Reverse Proxy on an Enterprise Portal Server.
    How do i do this...
    can you refer me to the applicable guides
    Thanks
    Kalyan

    Hello,
    Thank you to interest to my problem.
    Browser -
    SSL----
    > Firewall/DMZ (No SSL termination, all traffic forwarded to ISA Server). Yes but there is a port translation port 443 to 50201
    Firewall/DMZ -
    SSL----
    > ISA Servrer -- (SSL Termination)--. IN fact it is noit the ssl terminaison. But from this point the url is modify to reach the host with EP7.0
    ISA Server--SSL--
    > EP7.0 (port 502010) When I test my configuration I have the Message web page not found. With a capture software i have verified that the request is sent to my EP 7.0( url2). But no logon page appeares.  With the modification on line of the HTTP provider in the dispatcher, i have checked that the response contains the URL1 and the standard port. But none web page is displayed.
    Thank you for your help.
    Regards,
    Julien

  • Error when Integrating Ms Exchange server into Enterprise Portal

    HI All,
    We are trying to integrate them MS Exchange server into Enterprise Portal and is facing the problem with WebDAV Repository manager.
    i've already created a HTTP System given the right url for the system and i used the system in the WebDAV Repository, when i try to monitor the component called repository manager it is in yellow color and is showing the server status as start up failed and error msg is,
    <b>errors   1
    requests   1
    bytes-per-second   0
    successes   0
    response-average   234
    last-error-0   2006-05-19T05:22:31Z: PROPFIND /exchange/: 401 Unauthorized
    failures   0</b>
    do anyone of u know the exact error?
    Your help will be appriciated.
    Thanks in advance,
    Sireesha.

    With a Live Office connection, you would typically use the URL iView and the opendocument URL to integrate the dashboard into the Enterprise Portal. There are existing posts on this forum about opendocument and Xcelsius dashboards.
    Obviously you need to make sure the dashboard refreshes fine outside of the portal, for instance from Infoview.
    Then, you need to look at the cross domain constraints : have both Infoview and Enterprise Portal in the same domain or use crossdomain.xml. They are lots of posts on this forum about that too.

  • Configure SSO Connection from SAP Enterprise Portal to BOE Server

    Hi Guys,
    We recently installed a BOE Server and want to connect it to our SAP Enterprise Portal. What we need is just to display the Crystal Reports via Enterprise Portal. We have set up the following:
    SAP EP with AD Authentication
    SAP EP configured with SNC to SAP BI7 system
    SAP BOE XI 3.1 - SAP Integration Kit
    BOE Server configured with SAP Authentication via SAP BI7 System
    We've also set up BOE IK iviews and URL iviews pointing to existing reports in BOE. However, when we access it from EP, it prompts for a username and login to BOE. Is there a way to configure these so that there is no prompt for login to BOE server and SSO is used? Is it also possible to have a service account (e.g. domain/crystal) that will run the reports in BOE everytime a user accesses a report from SAP EP?
    Let me know if this is at all possible

    Hi,
    You should configure InfoView for SSO first, which required infoview.xml file modification, using windows AD default authentication. If you want to utilize the OpenDocument URL for iView then you also need to configure OpenDocument.xml file for SSO also. The SAP portal must have trust relation with the SAP BW server so the Windows AD token can be authenticate with SAP BW server.
    If you want crystal user to run all the report then you will lose data security. It can be done by hard coding user name and password in the report properties and database logon but the SSO capability can be accomplished only by windows AD, SAP or LDAP.
    For more details check BOXI Admin guide and SAP Integration Guide.
    Thanks,
    Muhammad

  • IPlanet Enterprise Web Server hosting a portal server

    Has anyone tried to port the Plumtree portal server component to iPlanet Enterprise Web Server (aka SunONE Web Server, v6.0 or later)? Plumtree doesn't support this, but I am trying to merge a custom SSO authenticator to the Plumtree portal (v5.0.1).
    I have this working great in security mode 0 (with SSL turned off), but I am having a difficult time getting past one last issue in security mode 2 (full SSL mode). I can get the portal server to run fine in mode 2 through Tomcat on the same machine, using the same certificate and JRE. I can also get iPlanet to run other servlet applications fine with SSL turned on. However, there appears to be either: (1) an incompatibility between iPlanet's NSServlet plug-in that handles servlets and the Plumtree framework classes that set up replies via SSL, or (2) a configuration error in my setup somewhere. I'm hoping that (2) is the real culprit, but I've tried just about everything I can think of, and haven't been able to resolve this problem.
    The server starts up fine and I can load non-portal content without a problem. But when I log in, the portal's main community page that should be returned is not being returned to the client. PTSpy doesn't indicate any problems, so I know the content is being built by the portal correctly, but the built page is never being sent back to the requesting client.
    Here is the error that gets logged to iPlanet's error log:
    [29/Dec/2003:15:05:53] failure ( 2772): Internal error: Unexpected error condition thrown (unknown exception,no description), stack: java.lang.NoClassDefFoundError: javax/net/ssl/SSLSocket
    at sun.net.www.http.HttpClient.parseHTTPHeader(HttpClient.java:793)
    at sun.net.www.http.HttpClient.parseHTTP(HttpClient.java:702)
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:583)
    at java.net.URL.openStream(URL.java:960)
    at org.apache.xerces.readers.DefaultReaderFactory.createReader(DefaultReaderFactory.java:149)
    at org.apache.xerces.readers.DefaultEntityHandler.startReadingFromDocument(DefaultEntityHandler.java:493)
    at org.apache.xerces.framework.XMLParser.parseSomeSetup(XMLParser.java:314)
    at org.apache.xerces.framework.XMLParser.parse(XMLParser.java:1097)
    at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:195)
    at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
    at com.plumtree.openfoundation.xml.dom.XPBuilder.LoadDocumentFromURI(XPBuilder.java:203)
    at com.plumtree.xpshared.jsutil.JSRegistry.LookupJSComponentVersions(JSRegistry.java:243)
    at com.plumtree.xpshared.jsutil.JSRegistry.GetJSComponentVersions(JSRegistry.java:184)
    at com.plumtree.xpshared.jsutil.JSRegistry.GetJSComponent(JSRegistry.java:465)
    at com.plumtree.xpshared.jsutil.JSRegistry.GetJSComponent(JSRegistry.java:444)
    at com.plumtree.uiinfrastructure.statichelpers.ConfigHelper.GetCommonJSIncludes(ConfigHelper.java:1330)
    at com.plumtree.uiinfrastructure.form.AFormAS.DisplayCommonJavaScript(AFormAS.java:59)
    at com.plumtree.portalpages.common.uiparts.PlumtreeAS.DisplayCommonJavaScript(PlumtreeAS.java:88)
    at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayHead(PlumtreeDP.java:599)
    at com.plumtree.portalpages.common.uiparts.PlumtreeDP.Display(PlumtreeDP.java:112)
    at com.plumtree.portaluiinfrastructure.activityspace.Interpreter.ProcessDisplayPageOrRedirect(Interpreter.java:816)
    at com.plumtree.portaluiinfrastructure.activityspace.Interpreter.HandleRequest(Interpreter.java:1589)
    at com.plumtree.portaluiinfrastructure.activityspace.Interpreter.DoService(Interpreter.java:448)
    at com.plumtree.uiinfrastructure.web.XPPage.service(XPPage.java:141)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:919)
    at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1061)
    at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:981)
    It looks like a Java classpath issue, but I've verified (even in the same log file with java debugging turned on) that the SSLSocket class is getting loaded. I've even tried moving the specification of the jar file containing this class (jsse.jar, part of the JRE) to the beginning and end of my classpath setting.
    I'm using the same JRE that is bundled with the Tomcat release supplied with my Plumtree 5.0.1 installation (1.4.1_02).
    I've posted a similar message on a couple other forums (Java and iPlanet-related) and haven't found an answer yet. Does anyone have any ideas?
    John

    In case anyone else experiences this, I have apparently stumbled upon an issue with iPlanet's handling a specified JRE/JDK instead of the supplied JDK in iPlanet (SunONE) Web Server v6.0, SP5, though I found a way around it to resolve my problem.
    I had been specifying a different JRE to run with through iPlanet's administrative server manager. However, even though I was specifying to load all the JRE's jar files in my classpath setting, iPlanet was only loading the rt.jar file for my specified JRE. With verbose logging turned on, the error log was indicating that the other classpath specified jar files were being loaded, but apparently they were not being used. The JDK that was released with iPlanet appears to be being used for all other JRE classes outside of those defined in rt.jar. Since the JDK supplied with the iPlanet release didn't contain jsse.jar, which contains SSL support, it was not being loaded and was causing the problem I was seeing.
    Instead of specifying the JRE of a different JDK that I was using, I changed the global setting in the administrative server manager to override the entire JDK. This has resolved my problem.
    So if you specify a JRE to override the iPlanet supplied JDK/JRE, it appears that only the rt.jar file of the specified JRE will be loaded, and the jar files associated with the iPlanet-supplied JRE will be used for all other classes. Specification of a complete JDK to override the supplied one will resolve this, and the portal server appears to work fine now in any security mode setting when hosted on iPlanet Web Server (SunONE), even though Plumtree doesn't support that as a host server application.

  • Enterprise Portal monitoring with Solution Manager

    Dear guru's,
    I have just installed a SAP Solution Manager 4.0
    I would like to monitor a Enterprise Portal SP15.
    Does someone have a walkthrough for this because very little information can be found on the sap help pages.
    I'm interested in user/memory/iview statistics etc.
    Hopefully someone of you has experience in this.
    I would appreciate it alot.
    Thank you
    Kind Regards,
    Bud

    Hi Bud,
    I've found useful docs here:
    https://websmp109.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001908512005E
    and.
    http://service.sap.com/nw04operation
    -->Supportability --Solution Manager Diagnostics - Setup Guide SP Stack 16
    bet regards
    Wolfgang

  • Two sap enterprise portal in the same server

    Hi,
    We have installed a SAP Enterprise Portal on a linux server, all ok!!. but now we want to install another SAP Portal in the same server with the same ehp and same sp, but diferent url, is it possible? and we have something in mind when we began to install it..
    e.g. diferents ports or diferents database SID to avoid errors.
    thankssss

    Hi Carlos,
    SAP Software in general is flexible regarding this requirement.
    A SAP ID identifies the system, and the Instance ID is related to the Portnumbers that are used...
    So lets say you have an:
    - host called "linuxhost1" and
       - you installed a SAP system "AB1" and
          - the CI is 00 and SCS is 01
    then you can install multiple additional installations for example
    - host called "linuxhost1" and
       - you installed a SAP system "AB2" and
          - the CI is 02 and SCS is 03
    etc etc..
    As long as your host has enough resources you can fill it up...
    The instance numbers you chose are reflected in the portnumbers. So in my example above  the AB1 portal is called by http://linuxhost1:50000 and AB2 portal is called by http://linuxhost1:50200...
    So in other words the instance number of the CI is used in the portnumber of the java instance (5NN00).
    The above info is also spread among different SAP installation guides, and SAP help pages.
    Cheers,
    B

  • How to install and add Enterprise Portal over an existing ECC server

    Hi Guys
    We have already installed the ERP package (ECC) and we have enough memory and diskspace on the server and there we are considering installing Enterprise Portal over the existing server so that we can use both ECC and EP.
    How can we do this? What are the steps to do it? I want to make sure that we don't corrupt the existing SAP stuff on the server, but just want to install enterprise portal .
    Your comments or suggestions will be highly appreciated.
    Thanks
    Ram

    just went ahead and installed from scratch

Maybe you are looking for

  • How to create Drop-Down with Function Module REUSE_ALV_GRID_DISPLAY

    Hi Experts, I have used Reuse_alv_grid_display function module in my report for ALV output. I have a requirement to add drop down in one cell of my output. I have searched but all are suggesting through OOPS programing that I can not use. If it is po

  • Payment program for foreign vendors

    Hi Experts, Can some body shed light on this.. Can we run the payment program for foreign vendors in their currency.. if soo what r the settings needed.Pls send in this mail iD ([email protected]) thanks in advance, R.Manigandan

  • Why do we have to activate individually all third party apps!!! There should be as easier way!

    Why do we have to activate individually all third party apps!!! There should be as easier way! Apple TV is not Apple anymore...

  • IT 2011

    Hi, _**While creating P10 ,P20 entries through IT201.I am getting dump.** Please let me know the error. Runtime Errors         IMPORT_FORMAT_ERROR Except.                CX_SY_IMPORT_FORMAT_ERROR Date and Time          08.06.2011 09:21:16 Short text

  • FDM multiload Error

    Hi All, When i am doing multiload, at Export step was failing with below Error: Data Clear Error Calc Script Failed. Code=10410 Description=Essbase API Procedure: [EsbCalc] Threw code: 1012004 - 1012004 - [Mon Nov 05 14:48:25 2012]as-sg-hyp11/FCRSSGR