Entry 001 is missing in table tab_fskb

Hi , I get a problem when I use t-code:fb70, the error message is "entry 001 is missing in table tab_fskb" , is tab_fskb a table ? I use se16 to view the table ,but there is no table named tab_fskb. who can give me some solution?
thanks a lot

Dear Victor,
Once you open a particular thread, after that why you don't follow it..?
Forget about awarding points to a helpful suggestion or closing a thread,you don't even reply when anybody starts showing interest in your question.
Yesterday you asked:
What should I pay attention to do a successful client copy ?
I do the remote client copy successfully , I see the message"remote client copy complete" in SCC3. but the developers say they can not do the post.
so , I want to have your advices about how to do a successful copy. what should I pay attention to.
And when I asked for certain information:
Please specify the following things to help us analyze your situation.
1. Your system landscape
2. Your source and target system while doing the remote client copy.
3. Also why you did client copy and more details about the problem that your developer is facing.
Then only we can guide you.
You didnt replied and again opening a new thread today
PS: What you expect from others..?..To share knowledge when you dont even follow your post and least bothered about answering certain doubt of various potential repliers.
Regards,
Ashutosh

Similar Messages

FB70_The entry 001 is missing in table TAB_FSKB

Hi,
    I create a company code, when I use FB70, enter company code、customer number、invoice and posting date, then click enter, a warning message will jump:
The entry 001   is missing in table TAB_FSKB
Message no. F5100
    If I change the company code to other one,everything is ok. So I think maybe something is wrong with the data related to company code.

HI
Plz go to OBY6 and check whether your company code is there are not. I dont think it is there. Even if it is there, see whether you have assigned the Chart of a/cs, fiscal year, document types, document no. ranges, field status grp.etc.
Plz assign points, if its helpful.
Regards
Rajaram

Error: "The entry 1111 is missing in table T043S"

Hello All,
While clearing a G\L account the below error was encountered:
"The entry 1111 is missing in table T043S"
1111 is company code,
However when I look at the table T043S, 1111 is there.
Could help me to figure out what might be the other cause of this error?
Thanks in advance!
Jhero

Hello,
In T043S and T043G (OBA3) you need to create two tolerance limits.
one tolerance limit with some name
second tolerance limit without any name (blank)
If you do not create tolerance limit blank then your tolerance is not going to work.
First create tolerance group blank for your company code, then copy that tolerance and give some name for your company code.
Hope it should solve your issue.
Regards,
Ravi

The entry AGX is missing in table T030B

Hi all,
When i create new record in FB70, with SGL Ind Z, there is an error: The entry AGX is missing in table T030B.
How to fix this issue?
Thanks,
Quang,

Hi,
Please maintain values for AGX at transaction code OBXW. You need to maintain posting key for Customer item with special G/L indicator at AGX.
Path for transaction at SPRO:-
Financial Accounting ---> Accounts Receivable and Accounts Payable ---> Business Transactions ---> Outgoing Invoices/Credit Memos ---> Outgoing Invoices/Credit Memos - Enjoy ---> Define Posting Key for Outgoing Invoices/Credit Memos
Regards,
Anand Raichura
Edited by: Anand Raichura on May 14, 2010 11:55 AM

The entry 1810 is missing in table T043S

hi ,
i am gettign the above eror in f-03 . clear g/l accounts, kindly help.
aslo waht is the diff between f-03 adn f.13 ( automatic clearing ), the compnay code is 1810
please let me know

Hi
Maintain - Tolerances for Groups of G/L Accounts
SPRO>FA>GLActg>Busi.tran>Open item cle>clearing dif>Tolerances for Groups of G/L Accounts
1810 100 100 99 99
VVR

F-32 the entry is missing in table

Hi ,
When we are performing the transaction F-32, we are getting the below error message
" The entry YYY is missing in table T043G ".
However, I could find the tolerance groups attached to this company code YYY in OBA3.
I have serached the forum and it says to create another entry for company code YYY in T043G and leave the Tolerance group as blank to resolve this issue..
But if i assign the Tolerance group as Blank to this company code, then would the tolerance check be completely removed for this company code ?
How does this work...Any idea on the after affects of this change...
Thanks,
Srikanth.

Hi,
Through a blank tolerance group, we specify the lowest level of payment differences and cash discount allowed for Customer.
this will be applicable for all customers in co. code. For any other set of customer whom we can have less control, we can create a new tol. group with desc and assign the same in master.
Regards,
Gangadhar

The entry T017 is misssing in Table T052,Message No.F5100

Hi Experts,
While Posting Entry useing T-code-F-02 i'm getting below error
The entry T017 is missing in Table T052 and message No . F5100.
What could be the reason?
Kindly give valuable input.
Shriram.

Hi,
Once in production whether that payment termis available or not if it is there ,
Then change message control to warning & proceed.spro-- cross component application --Bankdirectory there you can change
regards,
Santosh kumar
Edited by: santosh kumar on Oct 22, 2009 1:25 PM

While Manual BRS " missing in table T043S"---???

Hi All,
While i am doing Manual BRS FF67 following error is coming what is that and how to overcome
"The entry AM01 is missing in table T043S"
AM01 is my Company code here
i already assigned tolerance all the places where it required but still problem is coming
Regards,

Do you have the entry with AM01 in transaction OBA0?
Also check the below thread:-
[Re: Error: "The entry 1111 is missing in table T043S";
There should be and entry with blank tolerance group also.
Regards,
SDNer

Copying is not poss.because an entry is missing in Table TVCPL: ZOV2 ZDV2

Hi,
I created sales order and delivery for consignment purpose and for return it I create return sales order again, but at the time delivery creation the system shows me the error:
"Copying is not poss.because an entry is missing in Table TVCPL: ZOV2 ZDV2" Message no. VL473
I checked VTLA and copy sales order type to delivery type with following data:
Order requirements: 001
Combination requirement : 051
Header data: 001
and copy item category REN as follow:
order requirements: 101
Item data: 101
business data : 2
but problem still remained. So I want to know how I can fix this error message?

Dear,
Table TVCPL is the table which is used for copy control so the error says maintain it properly and as per message
there is error of Copy control Between Document ZOV2 to ZDV2 so I would suggest following step,
1)Check the Item Cat.(REN) is define for delivery (ZDV2) check it out if Item Cat. (REN) determination is done in Delivery
That is the only thing which will be missing, if stil problem exist then
2) Do set Copy Control altogether again just copy it between RE TO LR and rename as ZOV2 and ZDV2 and retry ur process.
AND IF U ARE DOING CONSIGNMENT PROCESS THEN LET ME KNOW AS IT REQUIRE DIFFERENT SETTING.
Regards
AJIT K SINGH
HAPPY TO HELP U

Error while creating cust In table T078D, the entry VD01 is missing...

Hi Gurus,
I am new to SAP and have just installed SAP 4.7 on my laptop. While creating customer master, a message displays In table T078D, the entry VD01 is missing, and even for XD01 the same message is displayed. Can you guysplease help me with this?
Thanks
Shiva

Hi,
this looks like some customizing records are missing in your installation.
Table T078D contains the transaction dependant field settings.
This is in relation with customizing transaction OB20
In that table, there should be at least 15 records with the corresponding table key
FD01
FD02
FD03
VD01
VD02
VD03
WR01
WR02
WR03
WR11
WR12
WR13
XD01
XD02
XD03
So, if you don't find why standard customizing records are not part of you installation, you may re-create such records with the above keys.
Please note that all fields that are not part of the key should at least contains '.' character for each digits of each fields.
eg: FAUSA is 40 digits long.
FAUSA = '........................................'
Hope this helps
Regards
Alain

Entry VEHICLE missing in table COM_SE_BUSOBJ

Hi Experts,
I’m facing an issue in SAP VMS (Vehicle Management System). If I click on the “Find” option in VELO transaction then list of vehicles will be displayed but system throwing following error” Entry VEHICLE missing in table COM_SE_BUSOBJ”
Plz help me to solve.
Thanks in advance!
Regards,
Naga

Hi Naga,
You have to maintain business object VEHICLE in customizing table COM_SE_BUSOBJ:
SPRO -> SAP Netweaver -> Application Server -> System administration -> Search engine service -> Define business objects for search engine service
Maintain record:
Business object: VEHICLE
Object type: 1
You have to enter the Index-ID for SES, see F1-help.
Regards
Joachim

Error F5100 - The entry FR 3 A1 is missing in table 021T

Hi all;
We have an error message when log on in French and try to run transaction F-44. After update Vendor Account, Company Code and click on the button "Process Open Itens" the system returns an error message F5100 - "The entry FR 3 A1 is missing in table 021T."
It is only happen when we log in French. Error message in French: "Dans la table 021T, il manque l'entrée FR 3 A1".
Can you help?
Thanks in Advance!
Gustavo

Hi Gustavo
Please refer to instructions in note 75750 to solve the incident.
Cause and prerequisites
Customizing error:
The user usually logs on to the R/3 System in a language other than
English. For the language English, the user has not maintained any line
layout variants under 'Financial accounting editing options: Document
entry' (Transaction: FB00).
Solution
After you have logged on in English, maintain the 'financial accounting
editing option: ...' by means of Transaction FB00.
Maintain the line layout variants for:
- Document entry
- Open items
- Line items
Example:
- 'Open items': Line layout variants
                (for example: A1, A1, A1, Z1, P1 or such like)
- 'Document entry': Line layout variants
                (for example: AA, STD)
- 'Line items': Line layout variants
                (for example: B3, A1)
- 'Payment advice notes': .... (SAP01, A1)
- 'Credit management': .... (ST1, S01).
Hope it helps
Kind Regards
davide

The entry ABCD ABCV is missing in table T043G

Hi
I have to clear an open invoice manually using F-53.
This is the error message i m getting
"The entry ABCD ABCV is missing in table T043G" [Here ABCD is the company code]
Please Help!
Thanks!

HI,
please check if Your company code is defined in transaction OBA3
or check the path IMG -> Financial Accounting -> Accounts Receivables and Accounts Payables -> Business Transactions -> Incoming Payments -> Manual Payments -> Define Tolerances (customers)
Go through the customer master and check which tolerance group the customer is assigned to (field' technical name is LFB1-TOGRU.
Regards,
Satish Muvva.

The entry FBZ4 S is missing in table T021V

HI
I am doing the service tax thorugh f-58 , there i am geeting this error.
The entry FBZ4 S is missing in table T021V.

Hi,
I think you have not maintained the t. code for payment.
Go to SM30. Enter the table name V_T021V. Click on Change button. Maintain the entries for FBZ4, Account Type S.
I hope this will solve your problem.
Regards,
Jigar

"The entry is missing in table T030"

Hi,
I'm trying to close a period but, after all the selections made, when I execute I get this message: "The entry is missing in table T030". I mention that I'm trying to do this in localization for Romania. Maybe somebody could tell me what this message means and what should I do?!
Thanks, Andreea

Hi Andrea
It looks like there is some account determination that is missing. Please recheck using TCode OBYC(relating to MM). Also please provide detailed information as to what transaction was exceuted when you got the error message.
However do check your automatic posting procedures in OBYC.
Regards,
Karthik
Message was edited by:
Karthik Coneru

Entry 001 is missing in table tab_fskb

Similar Messages

Maybe you are looking for