Envelope Address File - How do 'you' do it

Wondering how others keep an address file for printing envelopes in Pages.
What I have done is opened an envelope document and added many 'pages' to it each with a different address. There are obvious limitations to this and am betting there's a better way.
First I have to scroll through my thumbnails till I find the correct address then select 'from page to page' in the print dialog for the appropriate address.
Not the most elegant, it works for now, but bet someone has a cleaner way. (?)

Drag the VCard of the appropriate addressee from *Address Book* onto your Envelope template in Pages which will then merge the information. Then print that.
Obviously you need to have the addressee set up as an entry in Address book.
If you need multiple addresses make a group in Address Book of the individuals, then drag the group onto your envelope template.
Peter

Similar Messages

  • Merging word document with pdf file how do you renumber pages?

    After merging a word document with pdf file, how do you renumber pages?  The pdf has more pages than the word document.  I first converted the word document to a pdf, using Acrobat Standard 9.

    Hi Petek ,
    After you merge the files or combine files ,click on the Page Thumbnails panel on the left hand side.
    In the Page Thumbnail panel ,right click and you will get a drop down list .Select the option "Number Pages".
    You will see a dialog box with several options .You can renumber the pages from there as per your requirement.
    Regards
    Sukrit Dhingra

  • PS or LR ACR 7.3 will support the D800 raw files, how do you remove ACR 7.3 so you can install ACR 7

    PS or LR ACR 7.3 does not support the D800 raw files, how do you remove ACR 7.3 so you can install ACR 7.1 ?

    Mylenium wrote:
    Uninstall PS/ LR completely and reinstall from the original media/ download. Run the Creative Suite Cleaner Tool if necessary.
    Mylenium
    Not so, Mylenium. It's relatively quick to downgrade Camera Raw with a download and a bit of fiddling. See http://forums.adobe.com/thread/1143545

  • We had a Ipad 1st generation IOS5.  Added second email address for Messaging.  Tested and message came from 1st email address.  How do you get the second address to be the sender?

    Have a 1st generation Ipad IOS5 and added a second email address for messaging.  Tested sending a message to my Iphone and it was received as being sent by the first email address.  How do you select the second email address as the sender of a message?

    Hello slapshot13scotty,
    The information below details where to adjust both where messages are sent from and received.
    Receive iMessages using another email address:
    Go to Settings > Messages > Receive At > Add Another Email.
    Specify the phone number or Apple ID email address that appears in the “from” field when you start a new conversation:
    Go to Settings > Messages > Receive At > Caller ID.
    Existing conversations aren’t affected when you change this setting.
    iPhone User Guide
    http://manuals.info.apple.com/MANUALS/1000/MA1622/en_US/iphone_ios5_user_guide.p df
    Cheers,
    Allen

  • Use of BAT file - How do you completely delete 150 phones and their associate DNs?

    How do you completely delete 150 phones and their associate DNs? All the phones are in the same device pool. I prefer BAT way.
    Version of the CUCM: 8.6.2
    Type of phones: 7962 phones - associated with the same device pool.
    Additinal questions: Is there a way to delete elegantly all the phones and their associated DNs when all the phones are associated to the same device pool? I rather not work with specific extensions and MAC addresses.
    Thank you,
    Calin Lupas

    Hi Calin,
    Using BAT this will require 2 - passes. 1 for the phones and 1 for "unassigned DN's". this is nicely shown in the attached doc;
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/bat/8_0_1/bat-801-cm/t03delph.html#wp1342774
    Of course for the DN's you could delete them via the Route Plan report>Unassigned DN>select all>Delete
    Cheers!
    Rob

  • How do you change the format on a file, how do you change the format on a file, how do you change the format on a file

    how do you change the format of a file.

    Why do you think repeating yourself is going to make things clear?
    Additional information that might help;
    current format of file,
    desired format of file,
    application that created file
    and applications file going to used in.
    Allan

  • I need to change my apple id in my ipod (it was an old email address).  How would you do this?

    I need to change my apple ID in my ipod touch (it was an old email address).  I have changed to setting in itunes.  How would you do this? - not sure what my OS is.

    Go to Settings>Store (or Settings>iTunes and App Stores for iOS 6) and sign out and sign in with the other/updated account.

  • My iCloud id is an @me address. How do you change it?

    How do you change an iCloud id?

    Hey there cehgoherd,
    It sounds like you would like to update your Apple ID email address.
    This article should help you get that done:
    Apple ID: Changing your Apple ID
    http://support.apple.com/kb/HT5621
    Go to My Apple ID (appleid.apple.com), click "Manage your Apple ID", and sign in.
    If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID. If you are unable to receive messages at your trusted device, follow the guidelines for what to do if you can't sign in with two-step verification.
    In the "Apple ID and Primary Email Address section," click Edit.
    Enter the email address you want to use, then click Save Changes. Apple will send a verification email to that address.
    Open the email from Apple, then click Verify Now in the email.
    When the My Apple ID page opens, sign in with your renamed Apple ID.
    If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID.
    After you see a message indicating that verification is complete, remember to update all of the features and services that you use with your Apple ID.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • After the download of the 2 CS5 Photoshop files, how do you run the files?

    I've downloaded the 2 CS5 photoshop files to the same folder.  The program did not automatically open. 

    Cust44 what CS5 files specifically are you referring too?  Also which operating system are you using?

  • In Address Book, how do you create a new group under "On my Mac", not under "iCloud"?

    In Address Book there are groups under "On my Mac" and groups under "iCloud".  When I do File -> "Create new group", the new group always goes under "iCloud".  How can I make a new group to go under "On my Mac".  I also tried dragging the new group from the iCloud area to the "On my Mac" area, but that doesn't do it.  Address Book is version 6.1.3.  Thanks for your help.

    Maybe look in the Preferences > Accounts & disable the iCloud account? That should force it to create a local group then re-enable the iCloud account. I would use the 'File > Export… Addressbook archive' to make a backup before you begin, but it should be fine.
    I'm not sure 10.6.8 supported iCloud natively, so perhaps that is why it is being wierd?

  • In the address bar, how do you get rid of the Amazon button, the "e-pub catalogue" button and change my search button to Google vs Babylon? Where is the button beside the forward arrow that would allow you to see your current history of links?

    On my address bar, there is now a superfluous Amazon button at the right of the forward arrow where there used to be a button that would allow you to see your recent links. It's gone. In addition there is a useless "epub catalog" button and the search button is Babylon instead of Google. How do I go back to my working address bar.

    Right click the Back / Forward buttons to get a list of sites you visited.
    To reinstate Google as your search engine, do the following.
    * In the location bar, type '''about:config '''and hit Enter.
    * In the filter at the top, type: '''keyword.URL'''
    * Double click it and remove whatever's in there and replace it with http://www.google.com/search?q=
    * Go to File | Exit
    * Restart Firefox, go to the site you want to set as your homepage.
    * Go to '''Tools '''| '''Options '''| '''General'''.
    * Make sure it says "''Show My Homepage''" in the first dropdown menu.
    * Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen.
    The URL to add in "keyword.URL" becomes a link in this post, so right click it and choose "Copy Link Location" to copy it to the Windows clipboard. Then hit CTRL+V to paste it. Saves you having to type the whole thing.
    '''EDIT''': Remove the AmAzon button by right clicking a blank part of the tab bar and click '''Customize'''. Then drag it into the panel which opens.

  • Address Book: How do you select, copy and paste info to an email?

    I look up a contact in my Mac Address Book and want to cut and paste email/address and phone into an email I am writing in another application - in this case using AOL online.
    It seems that you cannot select and paste the information or selected parts of it from the Address Book to the email using the usual key commands to select/copy/paste text?
    It is as if you are trying to copy from a photo... am I the only one to find this a completely mindless limitation of the Address Book?
    Or is there something obvious I am missing?
    thanks in advance
    MS

    This is insane!  I switched to Mac a few years ago (still use XP/Win7/Linux at work) and generally like it. However, I keep running into these idiotic and arbitratry limitations!  I want to create a bunch of address cards for people I work with.  Everthing is the same except phone extension, name, and email.  There's no way to copy/duplicate contacts in Mac Address Book or on my iPhone.  And, like many similar issues, if I dare to ask about it at an "Expert Bar", I'll first get a look of confusion and when I finally get the person to understand, I'll just get the useless response of "that's how it works".   No ideas for work-arounds. No reporting to Apple development. Just the attitude of "why would anyone want to do anything it doesn't already do?"
    It's great having all the Apple stores around here and being able to ask (simple) questions, but they're really not able to deal with much more than older folks who just bought a Mac and don't know how to use a computer at all. If you've been using dozens of computers and operating systems for 20+ years, they don't want to talk to you.
    David

  • Address book: how do you turn off auto-fill?

    Address book fills in with past info from existing cards in almost every field. This is surely the most unhelpful feature for a data base that typically has unique information in every field in every card. I cannot fathom how to turn it off. Help would be much appreciated.

    Sandy,
    Welcome to Apple Discussions.
    I know that this is of little consolation to you, but the Tiger version of Address Book no longer has that annoying interface.
    I know of no way to turn it off in Panther.
    ;~)

  • When opening a previously saved png. file how do you show its layers?

    I was trying to save a large file as a Photoshop PDF and my program crashed. I was lucky enough to have saved this file in both a JPEG and PNG format onto my desktop but now once I move the files back into Elements, I have no history and no layers?

    No, that's right. History is only for the current session--any time you close a file its history gets cleared. And neither jpeg nor png files can have layers. If you want layers you need to save as tiff or psd. (PDFs can be layered, but not the basic pdfs that PSE can create, and PSE can't deal with a layered pdf file as a layered file, either.)

  • .MOD files - how do you convert to view with Imovie?

    A friend has sent me a couple of video clips which have .MOD files extension, they will not open in imovie. As a recent convert to my MAC from windows I am lost, any help much appreciated as to how I either convert the file or am able to save as a new file extension.
    Thanks

    I am having the same exact issue with my SD Card. My camcorder records to SD card, but I have no way of importing it. I am using iMovie 11.

Maybe you are looking for