Environment variable setting not working
Hi Frank,
Iam reposting this requst to forms forum because i did~t get any response from report forum.Please help me frank.
Iam facing a problem related to reports10g ids. database is 9i
My basic requirement is ,i want to show a report out put in a BRAZILIAN PORTUGUESE Language.
For this purpose i configured the report_server.conf file like
<environment id="PS">
<envVariable name="NLS_LANG" value="BRAZILIAN PORTUGUESE_BRAZIL.WE8MSWIN1252"/>
</environment>
After that i added a entry along with the web.show_documents(using for calling the report)envid=PS
when iam running the report ,report server is only converting one date field in to portuguese ,rest of them are same as in the database.
Actualy i dont know where i did wrong.if anybody know please help meee
Thanks in advance
mathew
Hello Matthew,
See Note:231051.1, Dynamic Environment Switching In Reports 9i for an example of setting your environment variables at runtime. It uses REPORTS_PATH, there is also an entry for NLS_LANG in the reports.sh file (in UNIX). This setting is causing the conflict when you try to set it at runtime.
I think you have to remove the entry from reports.sh config file and then you will have to pass the parm at runtime everytime.
I hope this helps!
Tony
Similar Messages
-
Environment variable setting not working in the report
Hi everybody,
Iam facing a problem related to reports10g ids. database is 9i
My basic requirement is ,i want to show a report out put in a BRAZILIAN PORTUGUESE Language.
For this purpose i configured the report_server.conf file like
<environment id="PS">
<envVariable name="NLS_LANG" value="BRAZILIAN PORTUGUESE_BRAZIL.WE8MSWIN1252"/>
</environment>
After that i added a entry along with the web.show_documents(using for calling the report)envid=PS
when iam running the report ,report server is only converting one date field in to portuguese ,rest of them are same as in the database.
Actualy i dont know where i did wrong.if anybody know please help meee
Thanks in advance
mathewHello Matthew,
See Note:231051.1, Dynamic Environment Switching In Reports 9i for an example of setting your environment variables at runtime. It uses REPORTS_PATH, there is also an entry for NLS_LANG in the reports.sh file (in UNIX). This setting is causing the conflict when you try to set it at runtime.
I think you have to remove the entry from reports.sh config file and then you will have to pass the parm at runtime everytime.
I hope this helps!
Tony -
Unable to start java tools - Error : Environment variable JAVA_HOME not set
hi all,
I am not able to start the java tool - Visual Admin, Configtool, etc in the solaris Bash shell.
I was given authorizations on solaris and i'm able to view the logs and browse in solaris boxes,
But, when i try to start Visual Admin, it says" ERROR environment variable JAVA_HOME not set "
Since,my colleagues are using this tool for years, how come the environment variable is not set only for my user profile ?
Is it like the environment variable has to set seperately for every user profile ?
Do i need to set it initially for my profile eventhough it is working for others ?
i am confused..please help.
AddyNicholls, Thanks for your quick reply.
Ofcourse, I use my login ID to use java tools and they use their's obviously.I don't use <SID>adm.
We WRQ reflection for X-Windows and Putty for Command line Solaris Access.
When i try to use VA through the X-Window tool WRQ reflection, I am not able to start the tool.
My doubt here is, Do we need to setup the environment variable for every new user initially for the first time ? ( I am a new user for this environment )
Supposing if i need to setup the environment variable, do i need to set it up for the all the Solaris Boxes i use ?
I am able to browse through the files.when i try to start the VA by giving ./go i am not able to start it up.
Appreciate your time and valuable replies.
Addy -
Environment Variables don't work after migrating zcm policy
Hi There...
I hope anyone can help me with this.
After migrating my zcm policies to active directory I found my Environment Variables set in my login script do not work anymore.
My guess is that somehow the Environment Variables in the login script are in a different cmd environment then the zcm bundles. but I'm still in the dark what migrating the policies to a different environment has to do with this... and how to solve it.
The policies didn't change, just the environment from where they are loaded...
I build a workaround by adding the set commands within launch command of the bundle, but I would rather keep them in my login script instead of builing 3 or 4 icons of the same application but with different set Environment Variables.
If anyone has a good idea... let me know plz!!
TIA
ReyZCM does not detect changes in environment variables until a reboot.
It's possible the variables were being set earlier in the logon process
which proceeded ZCM fully initializing.
Consider using something such as SETX.exe or SETENV.exe which can set
them permanently. There will still be a one logon delay until they are
seen.
On 12/17/2010 6:06 AM, rsedoc wrote:
>
> Hi There...
>
> I hope anyone can help me with this.
>
> After migrating my zcm policies to active directory I found my
> Environment Variables set in my login script do not work anymore.
>
> My guess is that somehow the Environment Variables in the login script
> are in a different cmd environment then the zcm bundles. but I'm still
> in the dark what migrating the policies to a different environment has
> to do with this... and how to solve it.
>
> The policies didn't change, just the environment from where they are
> loaded...
>
> I build a workaround by adding the set commands within launch command
> of the bundle, but I would rather keep them in my login script instead
> of builing 3 or 4 icons of the same application but with different set
> Environment Variables.
>
> If anyone has a good idea... let me know plz!!
> TIA
>
> Rey
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human. -
Hi experts m new to apps please help.. I have installed successfully Oracle Apps R12 on OEL - 5 All the services runining fine. but when i am opening forms its giving error "install missing plugins" i installed jre-6u7-linux-i586-rpm.bin and Mozilla Firefox 3.0.18 [root@ust ~]# cd firefox/plugins/ [root@ust plugins]# ln -s /usr/java/jre1.6.0_07/plugin/i386/ns7/libjavaplugin_oji.so ./libjavaplugin_oji.so [root@ust plugins]# ls libjavaplugin_oji.so libnullplugin.so [root@ust plugins]# ll total 20 lrwxrwxrwx 1 root root 58 Sep 11 16:22 libjavaplugin_oji.so -> /usr/java/jre1.6.0_07/plugin/i386/ns7/libjavaplugin_oji.so -rwxr-xr-x 1 root root 19160 Sep 15 2007 libnullplugin.so [root@ust plugins]# but when m trying to open forms at that time giving error "install j2se plugin version 1.6.0_07 on your client and NPX_PLUGIN_PATH environment variable set before starting Netscape."
Linux is not a certified client tier for accessing EBS
Unable to access r12 forms in linux client
https://forums.oracle.com/search.jspa?view=content&resultTypes=&dateRange=all&q=linux+client&rankBy=relevance&contentTyp…
HTH
Srini -
Variable Text not working as dynamic header in Crystal report
Dear Experts,
I'm working Crystal report that connected to Query BEX SAP BW trough SAP integration kit,
currently i have case that need report dynamic header using variable text from BEX query, but seem the variable text not working in Crystal reports. the header in Crystal report shown as Desription\technical name, not result from the variable text in Query BEX in SAP.
In https://wiki.sdn.sap.com/wiki/display/BOBJ/Crystal%20Reports%20and%20BW%20query%20elements stated that the "Text variable" with "replacement path" is supported, but i don't know in my query is not working.
i already set in Database -> options-> table and fields -> Show Both, but the text variable still not working.
can you help me
Crystal Reports 2008 12.2.0.290
SAP Integration KIT 12.1.0.890
Thanks
LuqmanPost your question BEX and B1 and classic SAP data source issues to the Integration Kit forum
-
Purchase Order Goods Receipt quantity tolerance setting not working.
Team,
We are using the IS-Oil solution, ECC 6.0 REL 605 SP LEVEL 009 .
The issue that I have is as follows:
Purchase Order Goods Receipt quantity tolerance setting not working, I had set up a 10% tolerance on QTY received in the GR process via the PIR and also the Purchase Value Key in the material master and also changed the message to a warning in OMCQ for message number M0722.
I had performed a similar configuration and master data maintenance on a different NON IS-OIL client install and it worked fine.
I believe it is the IS-OIL component in the Inventory update portion of the GR process that is causing the error.
I have searched for OSS notes, however they mention that there is no solution.
Setting the PO line item as Unlimited will not be best practice for the business and will not be used.
Has anyone come across this issue? and how was it resolved, your help and guidance will be greatly appreciated.
ThanksHello,
Please check the Tolerance levels in O588
Also you can use the BAdI OIB_QCI_ROUND_QTY: A new method, CHECK_TOLERANCE
Best Regards,
R.Brahmankar -
APPLLCSP Environment Variable set to : BITMAP
Hi,
While running my report in application i am geting error with the message below..
APPLLCSP Environment Variable set to :
BITMAP
XML_REPORTS_XENVIRONMENT is :
/apps/applap/11.5.9.appch/8.0.6.appch/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to: /apps/applap/11.5.9.appch/8.0.6.appch/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_AMERICA.UTF8
Can any one help on this?
Thanks In Advance,
RRcheck this link:
Change NLS_NUMERIC_CHARACTERS from ., to ,.
--Jayant -
SELECT INTO ( variable ) STATEMENTS NOT WORKING FOR SYBASE TABLE AS VIEW
Dear Experts,
We have connected our 9i db with Sybase db using Hs connectivity.
and then we have create the view in oracle db for SYBASE_TABLE as SYBASE_TABLE_VIEW.
ALL THE INSERT, UPDATE AND DELETE COMMANDS ARE WORKING BUT THE
select Into (variable) is not working.
Please help to resolve the select into statment which is in BOLD in the below routine
PLEASE NOTE! FORM WAS COMPILED SUCCESSFULLY AND FORM IS RUNNING BUT SELECT INTO COMMAND IS NOT WORKING.
Thanks & Regards
Eidy
PROCEDURE SRBL_INSERT IS
CURSOR SRBL IS
SELECT impno,impcod,impnam
from oracle_table1 a, oracle_table2 b
WHERE a.impcod=b.empcod
v_srpcod varchar2(5);
BEGIN
FOR rec in SRBL loop
begin
select "im_code" into v_impcod
from SYBASE_TABLE_VIEW
where "im_code"=rec.impcod;
exception when no_data_found then
v_srpcod:=null;
end;
END LOOP;
END;
Edited by: Eidy on Aug 16, 2010 11:28 AMhellow
try this.
select "im_code" into v_impcod
from SYBASE_TABLE_VIEW
where "im_code"=rec.impcod;
v_srpcod := v_impcod ;
........ -
Command Sets not working on ACS 5.1
I'm running ACS 5-1-0-44-3.
I have everything running properly on ACS 5.1. I'd like to implement command sets for selected users and groups. Under Access Policies -> Device Admin-> Authorization I have Command Sets selected. The cisco provided is DenyAllCommands. I have this command set running on all groups and every groups is still able to issue any command they wish. I've also created a "show_only" command set that I've issued one group and they are still able to do conf t or any other command.
Am I missing something?
Do you need to reference the command set name under the shell profiles?
Its my understanding that all you have to do is reference it in "Authorization" in the rules under Device Admin.
I can understand a custom command set not working because of user error but DenyAllCommands should work.
Anyone have any ideas?
I have already re-patched the ACS
Stopped and started services.
And it seems like Command Sets is the only not referenced in the logsI do it a lot
could you paste screnshot of your command set?
I've recently met another issue,
with my command set definition as below (as you can see its very simple):
almost every show is blocked (as suspected) but not "show run" (which is strange for me) -
Environment variable ORACLE_SID not defined.
I tried the command below
emctl -config dbcontrol db -repos drop
but I see this error message
Environmet variable ORACLE_SID not defined. Please define it.
Notice that Oracle is installed on Windows , just for studying.
Can anyone help me here please?user11083827 wrote:
I tried the command below
emctl -config dbcontrol db -repos drop
but I see this error message
Environmet variable ORACLE_SID not defined. Please define it.
Notice that Oracle is installed on Windows , just for studying.
Can anyone help me here please?And what do you not understand about "+Environment variable ORACLE_SID not defined. Please define it.+"?
Why don't (or can't) you define this variable?
:p -
Dynamic ORACLE_HOME in env variable PATH not working
Hi,
We have an issue whereby we want the PATH to be dyanmic with respect to the ORACLE_HOME.
Have implemented the solution in 'ORA-12557: TNS:Protocol Adapter Not Loadable' While Running OUI [ID 735400.1 but not working.
We have Windows 2008 R2 server with Oracle 11.2.0.3 client installed.
First when did set to check environment varibales, fouND no env. variable for ORACLE_HOME even though in registry so have set ORACLE_HOME as user env variable.
Have changed system env variable PATH to have %ORACLE_HOME%\bin; at very start
when do PATH to check value shows
literally as %ORACLE_HOME%\bin at start rather than translating to the real physical location as it does with other logical variables.
How can we ensure translates the ORACLE_HOME correctly so PATH is O.K.user5716448 wrote:
Hi,
We have an issue whereby we want the PATH to be dyanmic with respect to the ORACLE_HOME.
Have implemented the solution in 'ORA-12557: TNS:Protocol Adapter Not Loadable' While Running OUI [ID 735400.1 but not working.
We have Windows 2008 R2 server with Oracle 11.2.0.3 client installed.
First when did set to check environment varibales, fouND no env. variable for ORACLE_HOME even though in registry so have set ORACLE_HOME as user env variable.
Have changed system env variable PATH to have %ORACLE_HOME%\bin; at very start
when do PATH to check value shows
literally as %ORACLE_HOME%\bin at start rather than translating to the real physical location as it does with other logical variables.
How can we ensure translates the ORACLE_HOME correctly so PATH is O.K.
open Command Window & issue command belowecho %ORACLE_HOME%COPY the results, then PASTE all back here -
Oracle environment variable setting for mulit instances
Dear experts,
I am doing CRM_ABAP, CRM_JAVA,ERP installation based on Oracle in a laptop for SAP Best Practise.
The CRM_ABAP installation have done, and start to install CRM_JAVA named CRJ.
In CRM_ABAP installation, I set Oracle environment variable as below:(/etc/profile.d/oracle.sh)
・CRACLE_SID=u201DCRMu201D
・CRACLE_HOME=u201Doracle/CRMu201D
・PATH=$PATH:$ORACLE_HOME/bin:$ORACLE_HOME/bin/oPatch:$PATH:
・export CRACLE_SID CRACLE_HOME PATH
My question is that how do I set environment variable for CRM_JAVA(CRJ) in oracle.sh,?
I tried e.g. CRACLE_SID=u201DCRMu201D:u201DCRJu201D, CRACLE_HOME=u201Doracle/CRMu201D:u201Doracle/CRJ/102_64u201D
or CRACLE_SID=u201DCRJu201D CRACLE_HOME=oracle/CRJ/102_64u201D export CRACLE_SID CRACLE_HOME
in addition
but got an error message in SAPinst (Task Progress: configure Oracle server network)
said u201CAssertion failed:lsnrctl:Parameter dbHOME has to be a valid ORACLE_HOME).u201D
kindly help me to reslove the issue.
Thanks.
regards.
Li.etsuhinSetting a Linux environment variable like ORACLE_SID to multiple values will not work.
Use another oracle.sh, and maybe also another Linux user.
I am not familiar with the details, but what does your installation guide say?
Or you may have to use the same values for Java. The installation guide will tell you. -
Function to get session variable is not working
I created a report based on the following sql query:
SELECT EMPNO, ENAME, JOB, MGR, HIREDATE, SAL, COMM, DEPTNO FROM SCOTT.EMP
WHERE DEPTNO = empcust.current_deptno
empcust.current_deptno is a function which returns the value of the session variable. However, nothing gets returned. The value of the session variable is not found.
I know that the session variable is being set b/c i have a procedure that sets it and prints out the assigned.
This is my code for the current_deptno function. If anyone can help, i'd greatly appreciate it!
procedure current_deptno
return VARCHAR2
as
v_Session portal.wwsto_api_session;
v_Return VARCHAR2(20); --DEPT.DEPTNO%TYPE;
begin
v_Session := portal.wwsto_api_session.load_session('PORTAL','SESS_EMP');
v_Return := v_Session.get_attribute_as_varchar2('DEPTNO');
htp.p('Return session var'||v_Return);
RETURN(v_Return);
end;Hi Imtiaz,
Could you verify that the variable has indeed a value? You could check via the Session Manager in the Admin Tool. You could also check the Query Log to verify whether the Initialization Block is working like expected.
Thanks.
Daan Bakboord
http://obibb.wordpress.com -
Repost Function using Variable is not working
Hello experts! I am on BW-BPS 3.5. I have set up a repost function using variables to change a characteristic value for Business Unit.
1. I created 2 variables as Bus.Unit From and Bus.Unit To in the Planning Area. I am not using the variables in my planning level.
2. I entered the variables in the parameter group New Values area for the From and To Values.
3. My goal is when the user executes the Repost Function for a Variable Prompt should appear and have the user select the From Business Unit and To Business Unit.
The Variables are set up as USERVALUE User-Defined Values, Restriction of Values required by user and I have tried with/without option of Input Allowed by User.
Can you tell me what I am doing wrong, I expected a variable prompt when executing the Repost Function but it does not work.
Thank you,
TeriRavi, Thank you for your reply however I contiue to have errors or the execution does not repost (change any value) as noted below.
1. I have 2 Variables in Planning area var1 (from) var2 (to) for the same charateristic which is Business Unit
2. Business Unit is in the level, on the selection tab to add the variable I can only add 1 variable, So I added var1 (from) to the level.
3. Parameter group for old and new values - I have Var1 (from), var2 (to)
4. Report Function - are you referring to Reporting variables in BPS? I have set this up as suggested in the "How to Use Reporting Variable in BW-BPS" document.
5. Enter plan data: I receive prompt for VAR1, mandatory. At this point there is no value in Var2.
6. Execute Repost function - I receive an error to "Restrict Var2"
7. If I set variable values and add a value for Var2 I receive an error "The generated data is not contained in the selection condition".
Next I removed VAR1 from my planning level and turned on the option 'Selection in package' for Business Unit. This seems to work well.
What do you recommend?
Thank you,
Teri
Maybe you are looking for
-
Windows 7 64 Bit Boot Camp install on iMac 27" (2010) without int. DVD drive
I have a current 27" iMac (bought last year) and the internal DVD drive doesn't work. It's new, has NEVER been used. I guess it's dust inside, but cleaning CDs didn't help. I don't want to bring or send my iMac to the Apple repair service because nor
-
CR2008 hangs after upgrade to SP2 when opening a report w/ invalid printer
Hi, until CR2008 SP1, when I open a report that was formatted for an unknown printer, a messagebox is displayed with that message an I was able to edit the report and/or assign a correct printer to it. After installing SP2 this behaviour is changed i
-
Adobe reader comes packed with two other programs
I've downloaded Adobe Reader and its working just fine. The problem is, it seems to have downloaded two other programs with it: Adobe Acrobat and Adobe Air. Do I want these programs? What are they? Also, when I try to open Adobe Acrobat I continually
-
EA1 - Code formatting "squishes" multiple queries together
If you have more than 1 query in an SQL Worksheet and you "Format" (CTRL-F7) the query, then it removes all blank lines and bunches all of the queries together. I would have expected it to leave a blank line after each ";" so that the individual quer
-
ODI-1228: Task emp(Integration) fails on the target ORACLE connection Target
Hi all, I am getting error while executing interface on error. Following error occurs when i am executing interface, ODI-1228: Task emp(Integration) fails on the target ORACLE connection Target Caused By: java.sql.SQLException: Non Supported SQL92 to