Envy M6 (c2l95ua#ABL) - Windows 8 - Turn on second display (TV over HDMI) as computer wakes

I want my TV (used as a second display over HDMI) to turn on automatically as the laptop turns on or resumes from sleep/hibernation. (As does a monitor on a desktop PC or the built-in screen on a laptop)
CEC (Consumer Electronics Control) is supposed to allow to turn on TV over HDMI.
The television is CEC compatible and has CEC option turned on. Theres also an option called "Allow CEC compatible devices to turn on television", which is turned on.
Can this laptop turn on a TV through HDMI, with or without CEC?
How?
Thanks a lot.

Thanks for the reply.
Is the T.V. entering standby or powering off after a certain amount of time?
The TV is in what the manufacturer calls standby-mode.
http://www.insigniaproducts.com/products/televisions/NS-39E340A13.html
What model is the T.V.?
http://www.insigniaproducts.com/products/televisions/NS-39E340A13.html
TheT.V. should wake from standby upon receiving a signal from the notebook.
I agree. It should.
To the best of my knowledge, the notebook will not turn the T.V. on from a powered off state. At least, I haven't found any indication that this model will.
Anyone else has a solution? There could be a way to turn it on from off state if HDMI CEC is implemented by HP.
Or another way..?

Similar Messages

Windows 8 "Turn off the display" setting not working

Hi all, I've got a TP W520 which I upgraded to Windows 8 with all updated Lenovo packages including the power mgt driver, Lenovo settings dependency package, and the newly installed Lenovo settings metro app. I'm seeing the following problem when trying to set a time for the monitor to shut off under Control Panel -> Hardware and sound -> Power Options -> Edit plan settings: - If I set any time other than never for "Turn off the display" such as 1 hour for example, the monitor will get turned off as soon as the screen-saver launches from the Windows 8 Lock Screen. - I'm not seeing this same behavior if I let the screen-saver launch while sitting at the desktop screen, problem is only seen from the Windows 8 lock screen. You can test this as follows: - Set "Turn off display" to any time i.e. 30 min - Change your screen-saver to launch after 1 min to test this - Type ctrl-alt-del then click lock to enter the lock screen, then let the screen-saver activate after a minute. - Once the screen saver tries to start, in my case, I see the monitor getting turned off and the screen saver doesn't even start. The monitor shouldn't get turned off until 30 min elapses. I'm suspecting some kind of bug with this which is still outstanding and I look forward to feedback from others on this issue. Thanks, John

Hello @duleNS
To get your issue more exposure I would suggest posting it in the commercial forums since the HP EliteBook 8770w Mobile Workstation is a commercial product. You can do this here Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
The support page for your product may be helpful in the meantime: HP EliteBook 8770w Mobile Workstation.
I hope this helps!
Thank you for posting on the HP Forums.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

When running windows in vmware fusion how do I extend my windows desktop to my second display

I am running Windows 7 x64 Enterprise in a VMware session session on my MacBook pro. I was just given a second thunderbolt display today and I want to be able to extend my desktop when running the windows VM. When the VM is shut down it's working perfectly and awesome. However when I'm logged into and working with in the VM, I'm limited to only using one display. It would be very helpful to be able to extend to the second screen as I need to run 3-4 nearly full screen apps at once and would like to utilize this second display.

You might get better results raising that question in the VMware Fusion forum. I don't have two monitors so I can't test anything but a quick check on that forum for that question gave: "Normally if a user wants to use two monitors with a VM, they can select "Use All Displays in Full Screen" in Full screen mode."

Turning off second display

Is there anyway to turn off my second display while the display cable is still plugged in? Right now, no matter if my second display is on, when I plug in the cable to the port, it switches to dual display (I noticed from the brief black out refresh). I switch from single display to dual display often and run my graphics card pretty hard and it slows down a bit when I'm on dual so I'd like to keep the cable plugged in but only run dual when I want it to?

Not that I'm aware of. When a display adapter or cable is plugged in, the Display Preference does it's thing.
I ran an Earlier Intel iMac with a TV connected using a Mini DVI to Video adapter and it worked the same way. I simply left the cables connected all of the time and turned the TV on and off at will. The only problem that I occasionally had was, loosing a window or two on the second monitor (TV) when turning it off.
So on that note, if your using Extended Desktop Mode..? Don't forget to either drag all windows back to the main desktop or switch back to Mirroring before turning off the second monitor.

Thinkpad Edge S430 - Windows does not detect external display connected via HDMI

On a Thinkpad S430 with HD4000 integrated graphics, an external display connected via a HDMI cable is not detected at all when using Windows. The system is fully updated as of the time of posting this message, both via the Lenovo Update tool as well as Windows update.
The Intel driver version is 8.15.10.2696. It appears that this is the latest version, since it does not offer an update when I try to auto-update it via Device Manager.
NB: I am running Ubuntu 12.04 with kernel 3.4.0 on the same machine, and the external display works perfectly fine with this software configuration.
Hence I think that it's very likely that this is a Windows-specific driver issue.
Would Lenovo happen to have a driver update in the works? Alternatively, I will be thankful for any suggestions about possible resolution of this problem.

skn2011 wrote:
My Macbook Pro notbook 13.3" does not detect external display throught it's mini display port to HDMI connector when connected to Sony Bravia 32" LCD TV.Can anyone help me get the answer as i tried reading everywhere on internet and none does not seems to work.Please help me out guys.
Are you using the Apple adaptor or a 3rd party

Window dragging issues on second display

Hello everyone,
I have secondary display with 1920x1200 resolution and rotated 90° (portrait mode) connected to MB Pro early 2011. After updating to Mountain Lion from AppStore I faced with quite annoying effect on this display: when I drag any window over the desktop it's moving quite jerky. Also all system menus (dis)appearing with pulsing effect. When I drag any window to desktop on MacBook display - everything is smooth and OK.
Also I noticed that during desktop video capturing (using quicktime) overall perfomance degrades significantly: mouse cursor moves lazily, windows movements are really slow.
I'm feeling that this is serious software problem.
Is this known issue? Could someone reproduce it? Any workaround?
HW: MB Pro early 2011,
OS: Mac OS X Mountain Lion,
Secondary display: Dell U2412M, 1920x1200, connected through DisplayPort input.

Try repairing your permissions. Go to applications then to the "other" folder then go to disk utility, on the left hand side you will see a white box. Select the second option, usually called "mac HD" with that selected click on "repair permissions" in the center towards the bottom of the screen. Wait for it to complete, then see if this fixes the issue.
SMC:
http://support.apple.com/kb/HT3964
PRAM:
i. Ensure the machine is powered off.
ii. Locate the following keys on your keyboard in preparation for Step 4:
‘command’ – ‘option’ – ‘P’ – ‘R’
iii. Press the ‘power on’ button.
iv. Immediately – and before the grey screen appears – hold down ‘command-option-P-R’ all together.
v. Keep them held down until you’ve heard the start-up chime twice. After you release them you should hear it again, and hopefully your Mac will boot up normally.

Where do I find agree to terms and conditions? Once I agree will I be able to see all the music I brought over from my computer to my iPad?

Where do I find agree to terms and conditions for iTunes? Once I agree will I be able to see and listen to the music I transferred from my computer to my iPad?

Settings>iCloud>Storage and Backup. If iCloud backup is turned on, you should see the last backup date under "Backup Now".

Is unplugging TV-out adapter the only way to turn the second display off

When the video out adaper is plugged in the iMacs resolution resets to what the TV-out can handle, I.e. 1024x768.
I hate to have to plug/unplug the connecter to turn the TV-out off and thereby regain normal resolution on the iMac.
Is that the only way? I was hoping that there is a way to disable the video-out and get the iMac back to normal through software rather than physically pull the plug out to turn it off nd then have to plug it back in when I want TV.
Same goes for audio out. Any way to turn the external off while it's plugged in?
TIA

When the video out adaper is plugged in the iMacs
resolution resets to what the TV-out can handle, I.e.
1024x768.
I hate to have to plug/unplug the connecter to turn
the TV-out off and thereby regain normal resolution
on the iMac.
Is that the only way? I was hoping that there is a
way to disable the video-out and get the iMac back to
normal through software rather than physically pull
the plug out to turn it off nd then have to plug it
back in when I want TV.
Same goes for audio out. Any way to turn the external
off while it's plugged in?
TIA
Try using ScreenSpanningDoctor. It'll let you have different resolutions for the TV out and the iMac, stopping that insane behavior. Also check out the Griffin iMic for your audio out. Using VLC you can select the second screen for video playback and the iMic for audio. Hope this helps. (works great here)

Closing MacBook lid w/ mini-DVI to second display turns off second display

I hooked up a MacBook to another display via the mini-DVI to DVI adapter but, when I close the lid of the MacBook, the other display goes off. The display settings are set to mirror and this doesn't happen with my MacBook Pro. With my MacBook Pro, I can close the lid and continue working with the monitor connected directly to the DVI port without issues. Anyone have any suggestions as, to use my MacBook this way, both displays remain lit which is kind of pointless. Thanks in advance,
Derren.
Black 2 GHz Macbook Mac OS X (10.4.8) 1.5 GB RAM

It is puts the Macbook to sleep when you close the lid.
All you need to do is press a key on the external keyboard or mouse and it will wake up the Macbook with the lid closed. If you are using bluetooth for your external devices, ensure that the "wake from sleep" option is enabled under Bluetooth setting in System Preferences.

Selectively turn off second monitor

I am running 24" iMac with a second monitor connected via VGA (no DVI on second monitor). When I do not want to use the second monitor, I have to unplug it from the iMac so the mac stops using it. Is there an easy software switch or, preferably, a keyboard switch (like a windows F key), that I can press to disengae/reengage the second monitor? I suspect there is something in the monitors control panel, but I don't want to dive down that far every time I want to use it/not use it.

I am experiencing the same problem with a Samsung Aquos 52" connected thorough a Onkyo receiver/amplifier. The connection is DVI to HDMI to Onkyo amplifier and HDMI-HDMI to the TV. The main 23" Cinema Display flashes during turning on an off of both of TV and the amplifier and even when the TV is off and the amplifier is on, unless you restart the computer, it would keep detecting a second display, the only solution so far was to unattach the second display DVI to HDMI cable from the computer. Otherwise, several freezes occur after several flashes of the cinema display and eventually either the dock o the whole screen would freeze...Anyone knows how to avoid this issue? Btw, my id card is NVIDIA GeForce 6600.

Firefox 4 stops opening new windows after browser window dragged to second display

Firefox 4 stops opening new windows after browser window dragged to second display. It's weird. Behavior is fine until I drag any browser window to the attached second display, and after this point it stops opening new windows but will still open new tabs in the same window. Restart fixes it until I drag the window back to the second display.
"Show all bookmarks" stops working too--won't open a new window.
This is after clean reinstall with total deletion of any Firefox/Mozilla folders and the previously installed app and a restart of the computer.
Mac OS X 10.6.7
Firefox 4

Pretty sure this is either:
'''Bug 644733'''
or
'''Bug 609405'''
(...and they may be reporting the same thing.)

Can anybody help? My Safari browser keeps crashing. The whole window just turns grey.

Can anybody help? My Safari browser keeps crashing on iMac 10.7.5. The whole window just turns grey. It started happening around the time of the new bookmarks menu upgrade recently which changed the bookmarks to be only on the side and makes it so you can see all your bookmarks while browsing. I know I have a lot of bookmarks, so I tried hiding them, but it still happens. I ALREADY TRIED CLEARING MY HISTORY, AND THAT DID NOT HELP, AND I HAVE NO EXTENSIONS FOR THIS BROWSER.
Does the fact that I am in Brasil have anything to do with it?
Thank you to anyone who can help. In case no one can come up with an answer, is there an easy way to transfer my bookmarks from safari to either firefox or chrome?
Much appreciated.

1. This is a comment on what you should and should not do to protect yourself from malicious software ("malware") that circulates on the Internet. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
If you find this comment too long or too technical, read only sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
It can easily be disabled or overridden by the user.
A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
For the reasons given above, App Store products, and other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. OS X security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they're not absolute protection. The first and best line of defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
That means, in practice, that you always stay within a safe harbor of computing practices. How do you know what is safe?
Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is unsafe.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
Software that purports to help you do something that's illegal or that infringes copyright, such as saving streamed audio or video for reuse without permission, is unsafe. All YouTube "downloaders" are outside the safe harbor, though not all are necessarily harmful.
Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe. For instance, if a web page warns you that Flash is out of date, do not follow an offered link to an update. Go to the Adobe website to download it, if you need it at all.
Even signed applications, no matter what the source, should not be trusted if they do something unexpected, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
"FREE WI-FI !!!" networks in public places are unsafe unless you can verify that the network is not a trap (which you probably can't.) Even then, do not download any software or transmit any private information while connected to such a network, regardless of where it seems to come from or go to.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
Follow the above guidelines, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself from malware.
7. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. Any database of known threats is always going to be out of date. Most of the danger is from unknown threats. If you need to be able to detect Windows malware in your files, use one of the free anti-virus products in the Mac App Store — nothing else.
Why shouldn't you use commercial "anti-virus" products?
Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. Most of the real-world danger of malware attack comes from highly targeted "zero-day" exploits that are not yet recognized.
By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
8. An anti-malware product from the App Store, such as "ClamXav," doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An anti-virus app is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
Anti-virus software may be able to tell you which particular virus or trojan it is, but do you care? In practice, there's seldom a reason to use the software unless a network administrator requires you to do it.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user you don't have to live in fear that your computer is going to be infected every time you install an application, read email, or visit a web page. But neither should you have the false idea that you will always be safe, no matter what you do. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

Firefox won't open/connect tp the internet. Explorer opens and connects. Windows firewall turned off. No other antivirus program running. Happened when I downloaded new Firefox update.

Firefox won't open/connect tp the internet. Explorer opens and connects. Windows firewall turned off. No other antivirus program running. Happened when I downloaded new Firefox update.

I had the same problem when i dl-ed a new anti-virus softward, but what I did help me reconnect Firefox again!
Here is what I did,
Go to open firefox browser-->option-->advanced-->network-->settings-->and change it to auto-detect proxy settings for this network!
It worked for you, hope it will work for you too =)!
Cheers

[Solved] After watching several youtube html5 720p videos, Firefox (version 33) display or screen turns black and aero transparency in windows 7 turns opaque.

Hello ! I just want to share something familiar with that black display or screen occurs for some people. When I watch youtube videos, I used to watch them in html5 720p videos (not flash videos, https://www.youtube.com/html5 ). I upgraded firefox to version 33. No black display when I used it. Randomly and after watching several html5 videos on youtube, aero transparency in my windows 7 turns opaque and firefox display goes all black. Firefox doesn't respond at any command. I need to kill his process in task manager in order to close it. When I open firefox again, normal display goes. To relaunch aero transparency in windows 7, I need to restart the service whose name is, I think, "Desktop Window Manager Session Manager". I use windows 7 in french and the service name is "Gestionnaire de sessions de Gestionnaire de fenetrage".
To solve this, I upgraded my graphic driver but this didn't work. I tried to put "layers.offmainthreadcomposition.enabled" to false in "about:config" menu. No random black display but some html elements turned black for some seconds or definitely when firefox rendered web pages. I tried to uncheck "Use hardware acceleration when available" in options menu. No random black display but html5 720p videos didn't play smoothly.
Then, I chose to watch youtube 720p videos again with flash player and no random black display and html5 720p videos played normally.
Here are my graphic acceleration infos :
Date du pilote 7-2-2014
Description de la carte NVIDIA GeForce GTS 360M
DirectWrite activé false (6.2.9200.16492)
Fenêtres avec accélération graphique 1/1 Direct3D 11 (OMTC)
GPU #2 active false
ID du périphérique 0x0cb1
ID du vendeur 0x10de
Pilotes de la carte nvd3dumx,nvwgf2umx,nvwgf2umx nvd3dum,nvwgf2um,nvwgf2um
RAM de la carte 1024
Rendu WebGL Google Inc. -- ANGLE (NVIDIA GeForce GTS 360M Direct3D9Ex vs_3_0 ps_3_0)
Version du pilote 9.18.13.4052
windowLayerManagerRemote true
AzureCanvasBackend skia
AzureContentBackend cairo
AzureFallbackCanvasBackend cairo
AzureSkiaAccelerated 0
I hope this will be useful to solve this problem in future versions or to someone.

This is happening to me too, I don't know if this is an Adobe Flash Player 11.5's bug or it's just my computer. All my browsers, chrome, IE9, Fox, doesn't even load anime videos. I tried reinstalling 11.5 many times, it have no effect but I use IE9 64-bit to run the videos that couldn't run. I waited 25 min for a JW player to load an episode of anime and I'm sick of it.

Envy M6 (c2l95ua#ABL) - Windows 8 - Turn on second display (TV over HDMI) as computer wakes

Similar Messages

Maybe you are looking for